Ghp

ghp — GitHub Project Management

This skill provides the development workflow reference. Use these commands for specific actions:

• /ghp:init — Start a session: read project state, summarize, and pick what to work on
• /ghp:fresh — Bootstrap a fresh agent onto an issue (or pick from Todo)
• /ghp:new-milestone — Create a milestone with issues, branches, and project tracking in one flow
• /ghp:work — See in-progress issues and pick the best one to continue
• /ghp:wrap-issue — Close out an issue: summarize, PR to milestone branch, close sub-issues
• /ghp:wrap-milestone — Close out a milestone: summarize, PR to main, close issues
• /ghp:organize — Triage unorganized issues into the Project board
• /ghp:cleanup — Clean up stale branches, dead milestones, and orphaned issues
• /ghp:create-template — Scaffold a Project with standard board layout and mark as template

Extensions required

Milestones, blocking relationships, branches, sub-issues, and project management have no native gh subcommand. Install these extensions:

gh extension install yahsan2/gh-pm              # gh pm list/move/create/intake/triage/split/view
gh extension install valeriobelli/gh-milestone   # gh milestone list/create/edit/delete/view
gh extension install jwilger/gh-issue-ext        # gh issue-ext blocking/sub/branch/show

First-time setup

Every repository should have its issues tracked in a GitHub Project. Initialize the gh pm config for the repo:

gh pm init --project "Repo Name" --repo OWNER/REPO

This creates a .gh-pm.yml config file so all gh pm commands know the project and repo automatically — no --owner/--project flags needed.

If the Project doesn't exist yet, create and link it first:

gh project create --owner OWNER --title "Repo Name"
gh project link NUMBER --repo OWNER/REPO --owner OWNER
gh pm init --project "Repo Name" --repo OWNER/REPO

Then notify the user to configure these built-in Project workflows in the browser (Project → Settings → Workflows) — these cannot be set via CLI:

• Auto-add — automatically adds new issues/PRs to the Project
• Item closed — auto-moves to Done when an issue is closed
• PR merged — auto-moves to Done when a PR merges

Set up these Project views:

• Board (kanban) — columns: Backlog, Todo, In Progress, Review, Done
• Table — filterable by milestone, label, assignee
• Roadmap — milestones over time

Use /ghp:create-template to scaffold a project with these columns and mark it as a reusable template.

Development workflow

Work sizing

Rule of thumb: if you can't see a 3-layer breakdown (milestone → issues → sub-issues), it's just an issue.

Labels

Standardized labels — always available:

Additional labels can be created as needed for project-specific concerns.

Branch naming

Milestone branches: m{N}-{short-name} — created when planning a milestone.

Issue branches: m{N}/{issue-number}-{short-name} — uses m{N}/ prefix (not the full milestone branch name) to avoid git ref conflicts.

Sub-issue branches: m{N}/{issue-number}/{sub-issue-number}-{short-name}

Standalone issue branches (no milestone): {issue-number}-{short-name}

Keep {short-name} to 3–4 words max (e.g. batch-tree-eval, not implement-batch-tree-evaluation-for-forward-pass). The slug is derived from the issue title via slugify(), so write issue titles tersely — long titles produce unwieldy branch names that are painful to type, tab-complete, and read in git log.

Always create branches via gh issue-ext branch create to link them to the issue on GitHub:

# Milestone branch (create manually, no issue to link)
git checkout -b m7-new-eval-strategy

# Issue branch under a milestone
gh issue-ext branch create 42 --name m7/42-batch-tree-eval

# Sub-issue branch under an issue
gh issue-ext branch create 43 --name m7/42/43-fitness-function

# Standalone issue branch (no milestone)
gh issue-ext branch create 7 --name 7-duplicate-fitness

Task list on branch creation

When creating a linked branch for an issue that has sub-issues, create a TaskList to track progress. Sub-issues become the first tasks, and the parent issue is the final task:

# For issue #42 with sub-issues #43, #44, #45:
TaskCreate: "#43 — Implement fitness function"
TaskCreate: "#44 — Update forward pass"
TaskCreate: "#45 — Add benchmarks"
TaskCreate: "#42 — Batch tree evaluation (parent — wrap up when sub-issues done)"

Mark each task as completed when the corresponding sub-issue is closed. The parent task is completed last via /ghp:wrap-issue.

PR targeting and closing

• Milestone work (cascade): sub-issue PRs target the parent issue branch, parent issue PR targets the milestone branch, milestone PR targets main.
• Standalone issues (flat): PR targets main directly.

PR bodies must include closes #N for every issue/sub-issue being completed:

Use /ghp:wrap-issue and /ghp:wrap-milestone to automate this.

Commit messages

Follow conventional commits and always reference the issue:

feat(eval): implement batch forward pass #42
fix(fitness): deduplicate train fitness output #7
refactor(population): extract layer size computation
perf(crossover): reduce broadcast memory #61

Issue structure

Issues should follow this template:

## Summary
What and why.

## Changes Required
What needs to change, in which files.

## Dependencies
Issues that must be resolved first: #X, #Y

## Acceptance Criteria
- [ ] Criterion 1
- [ ] Criterion 2

Dependencies

After creating issues for a milestone, set up blocking relationships using gh issue-ext:

gh issue-ext blocking add 43 42    # #43 is blocked by #42 (do #42 first)
gh issue-ext blocking list 43      # show what blocks #43 and what #43 blocks
gh issue-ext show 42               # show ALL relationships for #42

Before closing an issue:

1. Run gh issue-ext blocking list to check all dependencies are resolved
2. If a blocker is still open, either block the close or document in a comment why the dependency is no longer required

Automating issue creation

When planning work, the primary agent writes a YAML plan file describing all issues, sub-issues, labels, blocking relationships, and statuses. Then runs the create-milestone.py script to create everything on GitHub in one call.

1. Read the template at skills/ghp/assets/milestone-template.yml
2. Fill in the issues with local integer IDs (used only for blocked_by references within the YAML)
3. Run: python skills/ghp/scripts/create-milestone.py plan.yml

The script creates the milestone, issues, sub-issues, branches, blocking relationships, and project statuses — mapping local IDs to real GitHub issue numbers automatically.

See /ghp:new-milestone for the full workflow.

Status assignment for new issues:

• The parent issue being worked on now → In Progress
• Sub-issues not yet started → Todo
• Issues with unresolved blockers → Backlog

The haiku subagent creates issues, sets labels/milestones, adds to Project, creates sub-issue and blocking relationships, and sets status. It does not decide what to implement — it only executes what it's told.

The primary agent starts working immediately after delegation, without waiting for the subagent to finish.

Syncing plans to issues

After creating or updating a plan, delegate to a haiku subagent to post it to the corresponding GitHub issue. The subagent receives only the file path and the issue number — no other context:

Read the file at <plan-file-path> and post its contents as a comment on GitHub issue #<number>:

gh issue comment <number> --body "## Plan

<contents of the file>"

Derive the issue number from the current branch name:

• m7-new-eval-strategy/feat/42-batch-tree-eval → issue #42
• fix/7-duplicate-fitness → issue #7

This keeps the issue as the single source of truth for what was planned and what was done.

Milestone naming

Milestones follow a standardized naming convention:

Milestone {number} - {Title}

Examples: Milestone 7 - New Eval Strategy, Milestone 12 - Float Constants

The milestone number matches the GitHub milestone number assigned on creation.

Milestone lifecycle

• Create a milestone when planning big work: gh milestone create with name Milestone {N} - {Title}
• All issues under it should be added to the milestone and the Project
• When the last issue under a milestone is closed, check and close the milestone
• Close stale milestones whose issues reference outdated code — tag remaining issues needs-revision

Stale detection

When the user (or another agent) asks, audit issues for staleness:

• Check if referenced files, functions, or methods still exist in the codebase
• Tag stale issues with needs-revision
• Offer to revise or close them

You can also proactively ask the user if they want to audit stale issues when you notice references to deleted code during normal work.

Command reference

All commands support --repo owner/repo or -R owner/repo for cross-repo operations.

Project management (extension: gh-pm)

gh pm init                                   # interactive setup, creates .gh-pm.yml
gh pm list                                   # list all project issues
gh pm list --status in_progress              # filter by status
gh pm list --priority p0,p1                  # filter by priority
gh pm list --assignee @me                    # filter by assignee
gh pm view 42                                # view issue with project metadata
gh pm move 42 --status in_progress           # change status
gh pm move 42 --priority high                # change priority
gh pm create --title "Fix bug" --status todo # create issue and add to project
gh pm intake                                 # list issues not in project
gh pm intake --dry-run                       # preview without adding
gh pm split 123 --from=body                  # split issue body checklist into sub-issues
gh pm split 123 "Task 1" "Task 2"            # split from arguments
gh pm triage name                            # run triage rules from .gh-pm.yml
gh pm triage --query="status:backlog" --apply="status:in_progress"  # ad-hoc triage

Milestones (extension: gh-milestone)

gh milestone list                        # list open milestones
gh milestone list --state closed         # list closed
gh milestone create                      # interactive create
gh milestone edit 3                      # edit milestone #3
gh milestone delete 3                    # delete milestone #3
gh milestone view 3                      # view milestone #3

Issue relationships (extension: gh-issue-ext)

# Sub-issues
gh issue-ext sub list 42                     # list sub-issues of #42
gh issue-ext sub add 42 43                   # add #43 as sub-issue of #42
gh issue-ext sub remove 42 43                # remove sub-issue relationship
gh issue-ext sub reorder 42 43 --before 44   # reorder sub-issues

# Blocking
gh issue-ext blocking add 43 42              # #43 is blocked by #42
gh issue-ext blocking remove 43 42           # remove blocking relationship
gh issue-ext blocking list 43                # show blockers and what #43 blocks

# Branches
gh issue-ext branch create 42 --name feat/42-desc  # create linked branch
gh issue-ext branch list 42                  # list linked branches

# All relationships at once
gh issue-ext show 42                         # parent, sub-issues, blocking, branches

Issues (native)

gh issue list --milestone "Milestone 7 - New Eval Strategy" --state all
gh issue view 13 --json body -q .body
gh issue close 16 --comment "Stale" --reason "not planned"

PRs (native)

gh pr list --state all
gh pr view 42 --json comments,reviews -q '.comments[].body'

Projects (native — only for initial setup)

gh project list                          # defaults to --owner @me
gh project create --owner OWNER --title "Title"
gh project link 4 --repo OWNER/REPO --owner OWNER