Nvim Install

Install Neovim in the web sandbox

This is the missing half of the neovim RPC skill: that skill drives a running Neovim via $NVIM, but the sandbox ships neither the binary nor a parent editor. This skill installs Neovim, launches it headless on a listen socket, and exports $NVIM so the neovim skill's commands work verbatim afterwards.

Scope: web sandbox only (CLAUDE_CODE_REMOTE=true). Do not run on a real machine — there Neovim comes from nixpkgs-unstable via home-manager.

Why Nix

Nix installs Neovim from *.nixos.org (allow-listed by default), so the binary needs no GitHub access — and nixpkgs-unstable ships a current Neovim with vim.pack, which nvim-fredrik requires. Same source as the real machines.

Step 0 — Network prerequisites

Two independent mechanisms gate traffic; they bite at different points.

1. The binary (this skill): substituted from the Nix cache (*.nixos.org), reachable under the default Trusted network policy. No GitHub, no action. Verify:

   curl -sSI -o /dev/null -w "cache:    %{http_code}\n" https://cache.nixos.org
   curl -sSI -o /dev/null -w "channels: %{http_code}\n" https://channels.nixos.org/nixpkgs-unstable/nixexprs.tar.xz
   

2. The plugins (a full nvim-fredrik run): at startup vim.pack clones ~50 plugins. These split three ways:

   • Public GitHub clones — already work under the default Trusted policy (github.com is allow-listed). No action.
   • codeberg.org plugins (nvim-lint, nvim-dap, nvim-dap-python) — required and blocked by default. Edit the environment → Network access selector → Custom → in Allowed domains add the bare codeberg.org → tick "Also include default list of common package managers" → save. This rebuilds the environment. See https://code.claude.com/docs/en/claude-code-on-the-web. Gotcha: use the apex codeberg.org, not *.codeberg.org — the wildcard matches only subdomains, but the plugin src URLs are https://codeberg.org/..., so a *.codeberg.org-only allowlist still 403s the clones. (Full network access also works but is broader than needed.)
   • GitHub release assets (codediff's prebuilt lib, Mason LSP servers, treesitter parsers) — gated by the GitHub proxy to attached repos regardless of network level, so they may 403. Optional for observing most config behavior; attach a specific repo with add_repo only if the change under test needs it.

Step 1 — Ensure Nix is installed

Follow the nix-install skill (apt nix-bin + single-user config). In short:

apt-get update
apt-get install -y --no-install-recommends nix-bin
mkdir -p /etc/nix
grep -q '^build-users-group' /etc/nix/nix.conf 2>/dev/null \
  || echo 'build-users-group =' >> /etc/nix/nix.conf

Step 2 — Install Neovim from nixpkgs-unstable

Everything is substituted from cache.nixos.org; nothing is compiled and no GitHub is touched.

nix-env -iA neovim -f https://channels.nixos.org/nixpkgs-unstable/nixexprs.tar.xz
export PATH="$HOME/.nix-profile/bin:$PATH"
nvim --version | head -1                                              # NVIM v0.12.x
nvim --headless -c 'lua io.write(tostring(vim.pack ~= nil))' -c 'qa'  # expect: true

Step 3 — Wire the config into place and persist the environment

The config lives in the cloned repo. Two env vars point Neovim at it:

• NVIM_APPNAME=nvim-fredrik makes Neovim read ~/.config/nvim-fredrik (the symlink created below).
• $DOTFILES is the dotfiles repo root. The config builds paths from it (Mason lockfile, lint configs, snippets); left unset it falls back to ~/.dotfiles, which doesn't exist in the sandbox, so those lookups silently resolve to missing files. Point it at the clone root.

Each Bash call is a fresh shell whose environment is snapshotted at session start — ~/.bashrc is not re-run per call (its non-interactive return guard exits early), so appending an export or source line there does not reach later calls. The filesystem does persist, though: write the env to a file and source it at the top of every later call that needs it — including every neovim-skill call, which keys off $NVIM.

repo="/home/user/dotfiles"        # adjust if the repo is cloned elsewhere
mkdir -p ~/.config
ln -sfn "$repo/nvim-fredrik" ~/.config/nvim-fredrik

cat > ~/.nvim-sandbox.env <<EOF
export PATH="\$HOME/.nix-profile/bin:\$PATH"
export DOTFILES="$repo"
export NVIM_APPNAME=nvim-fredrik
export NVIM=/tmp/nvim-fredrik.sock
EOF
source ~/.nvim-sandbox.env

Step 4 — Launch Neovim headless with a listen socket

This is the bridge to the neovim skill. Start a backgrounded headless instance listening on $NVIM, so the RPC skill's commands — which all key off $NVIM — work unchanged. The first launch clones all plugins via vim.pack (needs Step 0 item 2) and can take a few minutes.

source ~/.nvim-sandbox.env        # env doesn't persist across calls; re-source
rm -f "$NVIM"
# --headless keeps it alive as long as the socket is served; run detached.
nohup nvim --headless --listen "$NVIM" >/tmp/nvim-headless.log 2>&1 &
echo $! > /tmp/nvim-fredrik.pid   # record PID so a later restart can kill it
# Wait for the socket to accept RPC (plugin cloning happens during startup).
for i in $(seq 1 120); do
  [ -S "$NVIM" ] && nvim --server "$NVIM" --remote-expr '1' >/dev/null 2>&1 && break
  sleep 2
done
echo "NVIM socket: $NVIM"; tail -8 /tmp/nvim-headless.log

403 / CONNECT tunnel failed lines in the log point at the Step 0 item 2 gaps (usually codeberg.org if it isn't allowed yet, or a GitHub release asset). The editor still runs; only the plugins that failed to clone are missing.

Step 5 — Verify and hand off to the neovim skill

source ~/.nvim-sandbox.env
nvim --server "$NVIM" --remote-expr 'v:version'
nvim --server "$NVIM" --remote-expr 'luaeval("vim.fn.stdpath(\"config\")")'

With ~/.nvim-sandbox.env sourced, $NVIM is set exactly as if Claude Code were running inside a Neovim terminal, so switch to the neovim skill for all further interaction (buffer state, running Lua, inspecting diagnostics, LSP, plugins). Start each of those Bash calls with source ~/.nvim-sandbox.env too — the env doesn't carry over on its own.

One-shot checks (skip the persistent server)

Steps 4–5 stand up a persistent --listen server so the neovim skill can drive it across turns. You only need that for interactive, multi-step work. For an observe-once question — does this config change load cleanly? what does the formatter do to this file? — skip the socket entirely and use a self-terminating headless run that loads the real config, does its thing, prints, and quits with qa!. It exits cleanly and sidesteps all of the launch/restart/socket handling (and its footguns) above. Prefer it whenever you don't actually need cross-turn RPC.

source ~/.nvim-sandbox.env
# "does my config change load without error?"
nvim --headless \
  -c 'lua io.write("config="..vim.fn.stdpath("config").."\n")' \
  -c 'qa!'

Exercising behaviour follows the same shape — open a file so its filetype plugins load, run the operation, print, quit:

source ~/.nvim-sandbox.env
nvim --headless path/to/file.go \
  -c '<command that performs the operation, e.g. runs the formatter>' \
  -c 'lua io.write(table.concat(vim.fn.getline(1, "$"), "\n").."\n")' \
  -c 'qa!'

-c commands run in order after startup. Opening a file fires FileType loading, but a plugin that lazy-loads on its own event or command only activates once you invoke that command — so trigger the real operation rather than assuming the plugin is already loaded.

Testing a config-change PR

The nvim-fredrik config is part of this repo, so a PR that changes it is just a branch checkout — no separate config repo:

git -C /home/user/dotfiles fetch origin <pr-branch>
git -C /home/user/dotfiles checkout <pr-branch>

Then restart the headless instance so the new config is sourced. Kill the old instance by the PID recorded at launch and wait until it is actually gone before relaunching. Two traps make this fiddlier than it looks:

• Don't pkill -f 'nvim --headless --listen'. Each Bash call runs as bash -c '<the whole script>', so that string is in the script shell's own arguments; pkill -f matches and kills the script itself, which dies with a 128 + signal exit (e.g. 143/144) before it ever relaunches. Killing the recorded PID sidesteps the pattern entirely.
• Let the old process exit before reusing $NVIM. A dying nvim unlinks its own socket on the way out. Relaunch on the same path too soon and the old instance's cleanup deletes the new socket — RPC then fails with "connection refused" even though the new process is alive. So confirm it's gone (SIGKILL as a fallback) before rm-ing the path and starting fresh.

source ~/.nvim-sandbox.env
oldpid="$(cat /tmp/nvim-fredrik.pid 2>/dev/null)"
if [ -n "$oldpid" ]; then
  kill "$oldpid" 2>/dev/null || true
  for i in $(seq 1 50); do kill -0 "$oldpid" 2>/dev/null || break; sleep 0.2; done
  kill -9 "$oldpid" 2>/dev/null || true   # force if it ignored SIGTERM
fi
rm -f "$NVIM"
nohup nvim --headless --listen "$NVIM" >/tmp/nvim-headless.log 2>&1 &
echo $! > /tmp/nvim-fredrik.pid
for i in $(seq 1 120); do
  [ -S "$NVIM" ] && nvim --server "$NVIM" --remote-expr '1' >/dev/null 2>&1 && break
  sleep 2
done

Now drive the behavior under test via the neovim skill — e.g. for a neotest/diagnostics change, open a test file, run the command, then read the diagnostics:

nvim --server "$NVIM" --remote-expr 'luaeval("vim.json.encode(vim.diagnostic.get(0))")'

Caveats

• First launch is slow — plugin cloning is network-bound and serial.
• Mason / LSP servers and treesitter parsers are best-effort. They pull extra tools from GitHub release assets and compile locally; if a change under test doesn't depend on a language server, you don't need them. Failures are logged in /tmp/nvim-headless.log and don't prevent the rest of the config loading.
• Headless has no UI. Inspect state via RPC (vim.diagnostic.get, vim.lsp.get_clients, buffer APIs), not by looking at a screen.
• Ephemeral. The install and config live only for this environment's lifetime; nothing is committed. Re-run the skill in a fresh environment.