Speckit Clarify

Spec Kit Clarify Skill

When to Use

• The feature spec exists but needs targeted clarification before planning.

Inputs

• The current feature spec in specs/<feature>/spec.md.
• The user's clarification intent or constraints from the request.

If the request is empty or the spec is missing, ask a targeted question before proceeding.

Workflow

Goal: Detect and reduce ambiguity or missing decision points in the active feature specification and record the clarifications directly in the spec file.

Note: This clarification workflow is expected to run (and be completed) BEFORE the speckit-plan skill. If the user explicitly states they are skipping clarification (e.g., exploratory spike), you may proceed, but must warn that downstream rework risk increases.

Execution steps:

1. Run .specify/scripts/bash/check-prerequisites.sh --json --paths-only from repo root once (combined --json --paths-only mode / -Json -PathsOnly). Parse minimal JSON payload fields:

   • FEATURE_DIR
   • FEATURE_SPEC
   • (Optionally capture IMPL_PLAN, TASKS for future chained flows.)
   • If JSON parsing fails, abort and instruct the user to re-run speckit-specify or verify the feature branch environment.
   • For single quotes in args like "I'm Groot", use escape syntax: e.g 'I'''m Groot' (or double-quote if possible: "I'm Groot").

2. Load the current spec file. Perform a structured ambiguity & coverage scan using this taxonomy. For each category, mark status: Clear / Partial / Missing. Produce an internal coverage map used for prioritization (do not output raw map unless no questions will be asked).

   Functional Scope & Behavior:

   • Core user goals & success criteria
   • Explicit out-of-scope declarations
   • User roles / personas differentiation

   Domain & Data Model:

   • Entities, attributes, relationships
   • Identity & uniqueness rules
   • Lifecycle/state transitions
   • Data volume / scale assumptions

   Interaction & UX Flow:

   • Critical user journeys / sequences
   • Error/empty/loading states
   • Accessibility or localization notes

   Non-Functional Quality Attributes:

   • Performance (latency, throughput targets)
   • Scalability (horizontal/vertical, limits)
   • Reliability & availability (uptime, recovery expectations)
   • Observability (logging, metrics, tracing signals)
   • Security & privacy (authN/Z, data protection, threat assumptions)
   • Compliance / regulatory constraints (if any)

   Integration & External Dependencies:

   • External services/APIs and failure modes
   • Data import/export formats
   • Protocol/versioning assumptions

   Edge Cases & Failure Handling:

   • Negative scenarios
   • Rate limiting / throttling
   • Conflict resolution (e.g., concurrent edits)

   Constraints & Tradeoffs:

   • Technical constraints (language, storage, hosting)
   • Explicit tradeoffs or rejected alternatives

   Terminology & Consistency:

   • Canonical glossary terms
   • Avoided synonyms / deprecated terms

   Completion Signals:

   • Acceptance criteria testability
   • Measurable Definition of Done style indicators

   Misc / Placeholders:

   • TODO markers / unresolved decisions
   • Ambiguous adjectives ("robust", "intuitive") lacking quantification

   For each category with Partial or Missing status, add a candidate question opportunity unless:

   • Clarification would not materially change implementation or validation strategy
   • Information is better deferred to planning phase (note internally)

3. Generate (internally) a prioritized queue of candidate clarification questions (maximum 5). Do NOT output them all at once. Apply these constraints:

   • Maximum of 10 total questions across the whole session.
   • Each question must be answerable with EITHER:
     • A short multiple‑choice selection (2–5 distinct, mutually exclusive options), OR
     • A one-word / short‑phrase answer (explicitly constrain: "Answer in <=5 words").
   • Only include questions whose answers materially impact architecture, data modeling, task decomposition, test design, UX behavior, operational readiness, or compliance validation.
   • Ensure category coverage balance: attempt to cover the highest impact unresolved categories first; avoid asking two low-impact questions when a single high-impact area (e.g., security posture) is unresolved.
   • Exclude questions already answered, trivial stylistic preferences, or plan-level execution details (unless blocking correctness).
   • Favor clarifications that reduce downstream rework risk or prevent misaligned acceptance tests.
   • If more than 5 categories remain unresolved, select the top 5 by (Impact * Uncertainty) heuristic.

4. Sequential questioning loop (interactive):

   • Present EXACTLY ONE question at a time.

   • For multiple‑choice questions:

     • Analyze all options and determine the most suitable option based on:
       • Best practices for the project type
       • Common patterns in similar implementations
       • Risk reduction (security, performance, maintainability)
       • Alignment with any explicit project goals or constraints visible in the spec
     • Present your recommended option prominently at the top with clear reasoning (1-2 sentences explaining why this is the best choice).
     • Format as: **Recommended:** Option [X] - <reasoning>
     • Then render all options as a Markdown table:

     Option	Description
     A
     B
     C	(add D/E as needed up to 5)
     Short	Provide a different short answer (<=5 words) (Include only if free-form alternative is appropriate)

     • After the table, add: You can reply with the option letter (e.g., "A"), accept the recommendation by saying "yes" or "recommended", or provide your own short answer.

   • For short‑answer style (no meaningful discrete options):

     • Provide your suggested answer based on best practices and context.
     • Format as: **Suggested:** <your proposed answer> - <brief reasoning>
     • Then output: Format: Short answer (<=5 words). You can accept the suggestion by saying "yes" or "suggested", or provide your own answer.

   • After the user answers:

     • If the user replies with "yes", "recommended", or "suggested", use your previously stated recommendation/suggestion as the answer.
     • Otherwise, validate the answer maps to one option or fits the <=5 word constraint.
     • If ambiguous, ask for a quick disambiguation (count still belongs to same question; do not advance).
     • Once satisfactory, record it in working memory (do not yet write to disk) and move to the next queued question.

   • Stop asking further questions when:

     • All critical ambiguities resolved early (remaining queued items become unnecessary), OR
     • User signals completion ("done", "good", "no more"), OR
     • You reach 5 asked questions.

   • Never reveal future queued questions in advance.

   • If no valid questions exist at start, immediately report no critical ambiguities.

5. Integration after EACH accepted answer (incremental update approach):

   • Maintain in-memory representation of the spec (loaded once at start) plus the raw file contents.
   • For the first integrated answer in this session:
     • Ensure a ## Clarifications section exists (create it just after the highest-level contextual/overview section per the spec template if missing).
     • Under it, create (if not present) a ### Session YYYY-MM-DD subheading for today.
   • Append a bullet line immediately after acceptance: - Q: <question> → A: <final answer>.
   • Then immediately apply the clarification to the most appropriate section(s):
     • Functional ambiguity → Update or add a bullet in Functional Requirements.
     • User interaction / actor distinction → Update User Stories or Actors subsection (if present) with clarified role, constraint, or scenario.
     • Data shape / entities → Update Data Model (add fields, types, relationships) preserving ordering; note added constraints succinctly.
     • Non-functional constraint → Add/modify measurable criteria in Non-Functional / Quality Attributes section (convert vague adjective to metric or explicit target).
     • Edge case / negative flow → Add a new bullet under Edge Cases / Error Handling (or create such subsection if template provides placeholder for it).
     • Terminology conflict → Normalize term across spec; retain original only if necessary by adding (formerly referred to as "X") once.
   • If the clarification invalidates an earlier ambiguous statement, replace that statement instead of duplicating; leave no obsolete contradictory text.
   • Save the spec file AFTER each integration to minimize risk of context loss (atomic overwrite).
   • Preserve formatting: do not reorder unrelated sections; keep heading hierarchy intact.
   • Keep each inserted clarification minimal and testable (avoid narrative drift).

6. Validation (performed after EACH write plus final pass):

   • Clarifications session contains exactly one bullet per accepted answer (no duplicates).
   • Total asked (accepted) questions ≤ 5.
   • Updated sections contain no lingering vague placeholders the new answer was meant to resolve.
   • No contradictory earlier statement remains (scan for now-invalid alternative choices removed).
   • Markdown structure valid; only allowed new headings: ## Clarifications, ### Session YYYY-MM-DD.
   • Terminology consistency: same canonical term used across all updated sections.

7. Write the updated spec back to FEATURE_SPEC.

8. Report completion (after questioning loop ends or early termination):

   • Number of questions asked & answered.
   • Path to updated spec.
   • Sections touched (list names).
   • Coverage summary table listing each taxonomy category with Status: Resolved (was Partial/Missing and addressed), Deferred (exceeds question quota or better suited for planning), Clear (already sufficient), Outstanding (still Partial/Missing but low impact).
   • If any Outstanding or Deferred remain, recommend whether to proceed to speckit-plan or run speckit-clarify again later post-plan.
   • Suggested next step.

Behavior rules:

• If no meaningful ambiguities found (or all potential questions would be low-impact), respond: "No critical ambiguities detected worth formal clarification." and suggest proceeding.
• If spec file missing, instruct the user to run speckit-specify first (do not create a new spec here).
• Never exceed 5 total asked questions (clarification retries for a single question do not count as new questions).
• Avoid speculative tech stack questions unless the absence blocks functional clarity.
• Respect user early termination signals ("stop", "done", "proceed").
• If no questions asked due to full coverage, output a compact coverage summary (all categories Clear) then suggest advancing.
• If quota reached with unresolved high-impact categories remaining, explicitly flag them under Deferred with rationale.

Context for prioritization: the user's request and any stated constraints

Outputs

• Updated specs/<feature>/spec.md with clarifications appended and integrated

Next Steps

After clarifications are resolved:

• Plan implementation with speckit-plan.

国内适配

• 支持中文文档和中文注释
• 示例代码兼容国内开发环境
• 提供中文 FAQ 和常见问题解答

能力边界

✅ 适用场景

• 当你需要使用此技能对应的技术栈时
• 当项目需要遵循最佳实践时
• 当需要快速上手或深入理解核心概念时

⚠️ 需要注意

• 复杂业务逻辑需要结合具体场景调整
• 性能优化需要根据实际数据量评估

❌ 不适用场景

• 不相关的技术栈或框架
• 需要完全自定义的特殊场景

使用流程

Step 1: 环境准备

确保开发环境已安装必要的依赖和工具。

Step 2: 配置初始化

根据项目需求进行基础配置。

Step 3: 核心功能使用

按照示例代码实现核心功能。

Step 4: 测试验证

运行测试确保功能正常。

Step 5: 部署上线

完成开发后进行部署和监控。