Intelbras

Intelbras Alarm & Camera Skill

Monitor and control Intelbras alarm systems and cameras via HTTP API.

Setup

1. Environment Variables (Required for Credentials)

Create a .env file in the skill directory by copying .env.example:

cp .env.example .env

Edit .env with your actual credentials:

# Alarm System Configuration
INTELBRAS_ALARM_HOST=192.168.1.100
INTELBRAS_ALARM_PORT=80
INTELBRAS_ALARM_USERNAME=admin
INTELBRAS_ALARM_PASSWORD=your_actual_alarm_password
INTELBRAS_ALARM_ENABLED=true

# DVR Configuration (for cameras)
INTELBRAS_DVR_HOST=192.168.1.200
INTELBRAS_DVR_PORT=80
INTELBRAS_DVR_RTSP_PORT=554
INTELBRAS_DVR_USERNAME=admin
INTELBRAS_DVR_PASSWORD=your_actual_dvr_password

Security Note: The .env file is git-ignored. Never commit credentials to the repository!

2. Camera Configuration

Create data/config.json with your camera layout:

{
  "cameras": [
    {
      "name": "BACKLEFT",
      "channel": 1,
      "rtsp_subtype": 0
    },
    {
      "name": "BACKRIGHT",
      "channel": 2,
      "rtsp_subtype": 0
    }
  ]
}

Common Intelbras Alarm IPs

• AMT 8000: 192.168.1.100
• AMT 1000: 192.168.1.64
• IFR 7001/9001: 192.168.1.200

Environment Variables Reference

Commands

Examples

# Check alarm status
./scripts/status.sh

# Arm the alarm
./scripts/arm.sh

# Take snapshot from CAM1 camera
./scripts/camera-snap.sh CAM1

# Take snapshots from all cameras
./scripts/cameras-snap.sh

# Test connection
./scripts/test-connection.sh

Output Examples

=== Intelbras Alarm Status ===
Status: DESARMED (Disarmed)
Partitions: 1 armed
Zones: 32 total, 0 open

=== Camera Snapshot ===
BACKLEFT: media/cameras/BACKLEFT.jpg

Notes

• Default port is 80 (HTTP)
• RTSP camera streams use port 554
• Some models support HTTPS on port 443
• Alarm may have rate limits - avoid rapid successive calls
• Camera snapshots require ffmpeg
• Credentials are read from environment variables first, then fall back to config file