Add Dial

Add Dial Channel

Adds Dial — a real phone number for SMS and AI voice calls. Native adapter (no Chat SDK bridge): both directions go through the dial CLI — outbound via dial message, inbound via its command-target daemon. NanoClaw doesn't ship channels in trunk — this skill copies the Dial adapter, its pairing helper, and their tests in from the channels branch. The pair-dial setup step is maintained in trunk, so it is not copied here.

The mechanical steps under Apply carry nc: directive fences: an agent reads the prose and applies them, and a parser can apply them deterministically from the same document. Every directive is idempotent, so the whole skill is safe to re-run; anything a parser can't apply falls back to the prose beside it.

Apply

1. Copy the adapter, pairing helper, and tests

Fetch the channels branch and copy the Dial adapter, its pairing store and user-agent helper (each with its test), and the registration test into place (overwrite — the branch is canonical):

src/channels/dial.ts
src/channels/dial-pairing.ts
src/channels/dial-pairing.test.ts
src/channels/dial-user-agent.ts
src/channels/dial-user-agent.test.ts
src/channels/dial-registration.test.ts
src/channels/dial-grant.test.ts
src/channels/dial-status.test.ts

The dial-cli container skill is deliberately not copied here. container/skills/ is mounted read-only into every agent container (src/container-runner.ts), and a group with skills:'all' picks up whatever it finds there — so shipping the skill with the adapter would hand it to agents on installs that never configured Dial. It is installed only by /add-dial-tool, offered under Add phone superpowers below, which is the skill that actually provisions the CLI the skill documents.

dial.ts imports dial-user-agent.js at module scope, so omitting that helper breaks the build and every test that loads the channel barrel.

2. Register the adapter

Append the self-registration import to the channel barrel (skipped if present). This one line is the skill's only reach-in into the channel core:

import './dial.js';

3. Register the pairing setup step

Add the pair-dial loader to the STEPS map in setup/index.ts, inside the dormant marker region (skipped if already present — pair-dial ships in core, so this idempotent-skips on a normal install, but is expressed for a clean-upstream rebuild). The pairing handshake below spawns this step:

'pair-dial': () => import('./pair-dial.js'),

4. Install the packages

Pinned to exact versions — the supply-chain policy rejects ranges and latest. qrcode renders the scannable pairing card:

qrcode@1.5.4

The adapter needs no Dial client library: it shells out to the dial CLI, which this skill already requires for inbound. @getdial/sdk was dropped because it depends on pubnub, which pulls react-native, Metro and Hermes into the lockfile for what is a single send — and the CLI ships in lockstep with the Dial API, so a contract change arrives as a CLI release rather than breaking a request pinned in the adapter.

5. Build

Build first: it guards the adapter's typed core calls and proves the dependency is installed.

pnpm run build

6. Validate

Then run the one integration test.

pnpm exec vitest run src/channels/dial-registration.test.ts

dial-registration.test.ts imports the real channel barrel and asserts the registry contains dial — it goes red if the import line drifts. End-to-end SMS/voice is verified manually once the service runs.

Sign in to Dial

Install the CLI

Dial's CLI owns the account credential (an auth file it writes on sign-in), so the setup uses the dial CLI here. Ensure it's installed — this installs it if it's missing (for the full onboarding/auth reference, see the dial-cli skill or curl -fsSL https://getdial.ai/skills.md):

command -v dial || curl -fsSL https://getdial.ai/install | bash

Identify this install

Calls this setup makes to Dial identify the install. The dial CLI prepends DIAL_USER_AGENT to its own token, so the account's requests stay attributable to this NanoClaw install in Dial's server-side logs. Resolve the token once (nanoclaw/<version>; an unreadable package.json degrades to nanoclaw/unknown rather than blocking the install) and prefix every dial command below with it:

node -p "'nanoclaw/'+(require('./package.json').version||'unknown')" 2>/dev/null || echo nanoclaw/unknown

Pin the CLI path

Now pin the CLI's absolute path into .env. The adapter shells out to dial to register its inbound command target, and it runs inside the NanoClaw service, which does not inherit your interactive shell's PATH. The CLI usually lands in a version-manager bin directory (~/.nvm/versions/node/*/bin, ~/node/bin, …) that the service cannot see, so a bare dial fails with ENOENT, the command target is never registered, and the channel comes up connected but deaf — no inbound SMS or calls, with only a line in logs/nanoclaw.error.log to show for it. DIAL_CLI_PATH removes the guesswork; dial.ts already prefers it:

command -v dial

DIAL_CLI_PATH={{dial_cli_path}}

Check the sign-in

Check whether you're already signed in:

DIAL_USER_AGENT={{dial_ua}} dial doctor --json

Skip the reuse question when signed out

If you're not signed in, go straight to email verification — default the choice so the branch guard below stays single-valued:

echo switch

Read the account

If you are signed in, read which account (for the prompt below) and ask whether to reuse it or sign in as a different one (matches the old wizard's "Reuse this account?" prompt, with an explicit way to switch):

DIAL_USER_AGENT={{dial_ua}} dial doctor --json

You're already signed in to Dial as {{connected_email}}.

Reuse this Dial account, or sign in as a different one? (reuse/switch)

Reuse the account

Reuse — no verification needed; with no --code the command just (re)installs the NanoClaw agent skill:

DIAL_USER_AGENT={{dial_ua}} dial auth verify-otp --agent nanoclaw

Send the code

Switch (or not signed in) — verify an email with a one-time code. Collect the email:

What's your email? Dial sends a one-time code to verify it. By continuing you create a Dial account and agree to Dial's Terms of Service (https://getdial.ai/terms) and Privacy Policy (https://getdial.ai/privacy).

Send the code (--force re-sends even if a prior code is pending):

DIAL_USER_AGENT={{dial_ua}} dial auth login {{owner_email}} --force

Verify the code

Collect the code (resolves inline, right after the send above):

Enter the 6-digit code from your email

Verify it and provision your number (this also installs the NanoClaw agent skill):

DIAL_USER_AGENT={{dial_ua}} dial auth verify-otp --code {{otp}} --agent nanoclaw

Confirm the line

Confirm the account's number — this becomes the agent's public line (its platform_id):

DIAL_USER_AGENT={{dial_ua}} dial number list --json | jq -er '.numbers[0].number'

Your agent's Dial line is {{platform_id}}.

Set the inbound greeting

Set the line's inbound behavior — the system prompt the AI uses on calls into this number. Verification no longer takes an instruction, so a fresh number starts on Dial's default greeting until this runs:

DIAL_USER_AGENT={{dial_ua}} dial number set {{platform_id}} --inbound-instruction "You are a friendly AI receptionist answering calls to this number. Greet the caller, ask how you can help, and take a clear message — their name, number, and reason for calling — if you cannot help directly."

Pin the default sender

Make that line the CLI's default sender. Verification saves whichever number the account considers primary — the oldest one — while the line picked above is the newest (numbers[0]). On a single-number account those coincide, so nothing looks wrong; with two or more they diverge permanently, and every dial call / dial message that omits --from-number goes out from a number this install isn't listening on. Replies to it are dropped as no_agent_wired.

Rewriting phoneNumber/phoneNumberId in the auth file makes the no-flag path land on the wired line, so an agent that forgets the selector is still correct:

f="${XDG_DATA_HOME:-$HOME/.local/share}/dial/auth.v1.json"; i=$(DIAL_USER_AGENT={{dial_ua}} dial number list --json | jq -er --arg n '{{platform_id}}' '.numbers[]|select(.number==$n)|.id') && jq --arg n '{{platform_id}}' --arg i "$i" '.phoneNumber=$n|.phoneNumberId=$i' "$f" > "$f.new" && mv -f "$f.new" "$f" && chmod 600 "$f" && echo "default sender pinned to {{platform_id}}"

Choose who may text the line

A phone number is guessable, and whoever reaches the agent gets a turn with it — including its dial CLI, which is authenticated for the whole Dial account. An admitted stranger can ask the agent to list every SMS and call on the account, read call transcripts, or buy another number. Session isolation doesn't prevent this: the credential is the exposure, not the conversation.

So decide who gets in. owner is the safe default; pick public only if you want a line strangers can start conversations on (an inbound receptionist, or outbound sales where prospects text back):

Who may text this line — `owner` (only the phone you pair next; everyone else is refused) or `public` (anyone who knows the number reaches the agent)?

Your answer is written to the line's own unknown_sender_policy when the line is registered below, after the restart (ncl is socket-only, so it needs the service up). It lives in the database from then on — per line, so a second number added later carries its own answer — and the adapter never rewrites it.

Locked to you: only the phone you pair in a moment can reach the agent on {{platform_id}}. Anyone else who texts it is refused — including people your agent calls, so they can't reply by text. To open it later: `ncl messaging-groups update --id <id> --unknown-sender-policy public` (find the id with `ncl messaging-groups list`).

Open line: anyone who knows {{platform_id}} can text the agent and will get a reply. Each person gets their own conversation, but they all reach an agent holding your Dial account credentials — so don't hand out this number casually. To lock it to just you later: `ncl messaging-groups update --id <id> --unknown-sender-policy strict` (find the id with `ncl messaging-groups list`).

Restart

Restart the service

Restart the service so it loads the Dial adapter, and wait for its CLI socket. The adapter must be live and polling before pairing — it's the thing that observes the code you text:

bash setup/lib/restart.sh

Start inbound delivery

Wire inbound event delivery and the command target. Both are best-effort: a sandbox/CI without a user-service supervisor can't run the listen daemon, but outbound still works and inbound can be started manually later (see Troubleshooting), so these never fail the run:

DIAL_USER_AGENT={{dial_ua}} dial listen install || true

Register the command target

Point the daemon at the adapter's event handler (same best-effort rule):

DIAL_USER_AGENT={{dial_ua}} dial local-target add cmd "$PWD/data/dial/handle-dial-event.sh" || true

Register the line (owner-only)

Register the line, carrying the access choice from above onto its own row. One platform_id serves many correspondents, so it's a group (--is-group 1) and each texter becomes a thread inside it. Idempotent — a re-run returns the existing row, and does NOT reset a policy you have since changed with ncl:

ncl messaging-groups create --channel-type dial --platform-id {{platform_id}} --is-group 1 --name "Dial {{platform_id}}" --unknown-sender-policy strict

Register the line (public)

The same row, open to anyone who texts it:

ncl messaging-groups create --channel-type dial --platform-id {{platform_id}} --is-group 1 --name "Dial {{platform_id}}" --unknown-sender-policy public

Pair your phone

Dial account auth carries no per-sender binding, so the agent proves you own the phone you'll text from with a one-time pairing handshake: it issues a 6-digit code, you text those exact 6 digits to the Dial line, and the live adapter matches them. Tell the user:

A 6-digit pairing code (and a scannable QR) is about to appear in this terminal. From the phone you want to use, text just those 6 digits to your Dial line {{platform_id}} — or scan the QR, which opens Messages pre-filled so you just press Send.

Run the pairing handshake. It prints the code/QR, streams "waiting…" while it watches for your text, and resolves the sender's number once the code matches:

pnpm exec tsx setup/index.ts --step pair-dial -- --line {{platform_id}}

owner_handle (the phone you paired from) and platform_id (your Dial line) are what the owner-wiring step needs. The greeting goes out over your Dial line as soon as pairing completes.

Now set expectations about outbound SMS, before the operator hits it as a silent carrier rejection. Calls both ways and inbound texts work from this moment; US carriers drop outbound SMS from a number that has no 10DLC registration, and the adapter reports that as a delivery-failure notice rather than anything the operator can fix in NanoClaw:

Your number {{platform_id}} can receive texts and calls now. To text US numbers it needs 10DLC registration: $25, usually 3-5 business days, here's the link: https://getdial.ai/dashboard/numbers

Add phone superpowers (optional)

Show the pitch as a boxed note, then ask — mirrors the old wizard's p.note

• confirm:

Add phone superpowers to your assistant? Say yes so your assistant can send SMS and make AI calls for you from every channel you use it on — Telegram, WhatsApp, and more.

Install the Dial tool now?

If yes, apply the /add-dial-tool skill now, as its own document describes. It asks which agents may use Dial (and blocks the rest at the gateway), puts the CLI and its skill in the agent image, and registers the account's key with OneCLI. It needs OneCLI; if that isn't set up it says so, and the channel still works without the tool:

The tool's own document asks which agents may use Dial. Ask it here instead: a nested step's stdout is a pipe, so clack cannot echo what is typed into it, and this skill owns the operator's terminal. List the groups, then collect the answer and hand it down:

ncl groups list --json | jq -r 'if (.data|length)==0 then "no" else "yes" end'

No agents exist yet — this install creates its first one in a moment, so there is nobody to choose between. Installing the tool for every agent; re-run `/add-dial-tool` any time to narrow that down.

ncl groups list --json | jq -r '[.data[] | "\(.id) (\(.name))"] | join(", ")'

Agents on this install: {{agent_groups}}. Giving an agent Dial lets it text and call any number and buy numbers, billed to your Dial account. Agents you leave out are blocked at the gateway (reversible by running /add-dial-tool again). Agents created after this run have Dial until the next run.

Which agents may use Dial? Enter agent ids separated by commas with no spaces (the `ag-…` column), `all` for every agent, or `none` to install the tool with every agent blocked for now.

pnpm exec tsx setup/lib/skill-driver.ts .claude/skills/add-dial-tool --input 'dial_agents={{dial_agents}}'

pnpm exec tsx setup/lib/skill-driver.ts .claude/skills/add-dial-tool --input 'dial_agents=all'

Then tell the sandboxed agent which line is its own. The container authenticates through the OneCLI proxy and has no auth file, so defaultNumberId is null in there — an agent that omits --from-number gets an error, and one that picks from dial number list gets whichever number sorts first, which is unrelated to what's wired. Only this skill knows the answer, so it has to write it down — into the mounted skill file, which every container reads on its next spawn:

if [ ! -f container/skills/dial-cli/SKILL.md ]; then echo "dial-cli skill not installed (the tool installer did not complete) — skipping the wired-line note"; else printf '\n## This install'"'"'s line\n\nAlways pass `--from-number {{platform_id}}` on every `dial call` and `dial message`. That is the line this NanoClaw install is wired to; any other number on the account reaches nobody and replies to it are dropped.\n' >> container/skills/dial-cli/SKILL.md && echo "wired line recorded for the sandbox: {{platform_id}}"; fi

Next Steps

If you're in the middle of /setup, return to the setup flow now. Otherwise wire this channel with /init-first-agent (or /manage-channels). To add a second Dial number later, see the /add-dial-number skill.

Channel Info

• type: dial
• terminology: Dial calls it a "number" or "line." One number is a single threaded line — each texter/caller gets their own thread.
• platform-id-format: the bare E.164 number (e.g. +14155550123) — unlike prefixed channels, the number itself is the id.
• how-to-find-id: Do NOT ask the user for an id. Dial registration uses pairing — run pnpm exec tsx setup/index.ts --step pair-dial -- --line <E.164>. The step prints a 6-digit code + QR; tell the user to text just those 6 digits to the Dial line. Success emits a PAIR_DIAL block with STATUS=success, PLATFORM_ID (the bare line), and PAIRED_NUMBER (the bare sender E.164). The service must be running — the adapter is what observes the code.
• supports-threads: yes (each correspondent is a thread on the line, with its own session)
• typical-use: A real phone number for SMS and AI-handled voice calls — receptionist, notifications, 2FA relay.
• default-isolation: One line → one agent group. Who may reach it is the operator's choice at setup (inbound_access): owner admits only the paired phone, public admits everyone. Defaults to owner-only.

Troubleshooting

dial: command not found / the CLI gate fails. The Dial CLI isn't on PATH. Run curl -fsSL https://getdial.ai/skills.md and follow its install steps, then re-run this step.

The email code never arrives. Check spam, confirm the address is one you can read, and re-run — dial auth login <email> --force re-sends. The code is sent by Dial's servers, not NanoClaw.

Inbound texts/calls don't reach the agent. dial listen install needs a user-service supervisor (launchd/systemd --user); sandboxes/CI don't have one. Outbound still works. Start it manually with dial listen install once a supervisor is available, and confirm the command target with dial local-target list.

Pairing never completes. The live adapter observes the code, so the service must be running — the restart step comes before pairing for exactly this reason. Text just the 6 digits to the Dial line; a wrong message is ignored. Codes expire after 10 minutes, so if it times out (5 min) or the code goes stale, re-run this step for a fresh one.

"Pairing is paused for about N min." Five wrong codes texted to the line inside 10 minutes locks that line for 15 — a brute-force guard, and while it holds even the correct code is refused. The wizard prints this warning when it happens; nothing is texted back to the sender, by design. Wait it out and re-run this step for a fresh code, or override the thresholds with DIAL_PAIRING_MAX_ATTEMPTS / DIAL_PAIRING_ATTEMPT_WINDOW_MS / DIAL_PAIRING_COOLDOWN_MS / DIAL_PAIRING_TTL_MS.

Everything green but no replies. Run pnpm exec vitest run src/channels/dial-registration.test.ts — red means the barrel import drifted, so re-run the Apply steps. If green, restart again (bash setup/lib/restart.sh) and check logs/nanoclaw.error.log.