Depmap Crispr Essentiality

DepMap CRISPR Gene Effect Analysis Guide

Overview

This guide covers the correct interpretation and analysis of DepMap CRISPR gene effect (Chronos) data. The most critical and common error in DepMap analyses is failing to negate the CRISPR scores when computing correlations with "essentiality." A secondary but equally damaging mistake is using bulk correlation shortcuts that mishandle per-gene NaN patterns. This guide provides the mandatory sign convention, the correct per-gene NaN-safe Spearman correlation implementation, and data loading/alignment procedures.

Key Concepts

DepMap CRISPR Score Convention

The CRISPR gene effect score (produced by the Chronos algorithm) quantifies how gene knockout affects cell viability:

• Negative score: gene knockout reduces cell viability -- the gene is essential for that cell line
• Zero score: no measurable effect on viability
• Positive score: gene knockout increases viability (rare, may indicate tumor-suppressive behavior)

The DepMap portal distributes these scores in the file CRISPRGeneEffect.csv. Each row is a cell line (DepMap ID, e.g., ACH-000001) and each column is a gene in the format GENE_NAME (ENTREZ_ID), e.g., A1BG (1).

Essentiality Sign Interpretation

Because negative raw scores indicate essentiality, any analysis that asks about "essentiality" or "dependency" requires negating the raw CRISPR scores:

• "Correlation with essentiality" = correlation with -CRISPRGeneEffect (negated)
• "Higher essentiality" = more negative raw score = more positive negated score
• "Most essential gene" = gene with the most negative raw score

If you correlate expression with raw CRISPR scores and find 3 genes with correlation <= -0.6 and 0 genes with correlation >= 0.6, then the correct answer for "genes with strong positive correlation with essentiality" is 3, not 0. The negative correlations with raw scores ARE the positive correlations with essentiality.

Data Structure: CRISPRGeneEffect Format

The standard DepMap data files use a consistent structure:

• Index: DepMap cell line identifiers (ACH-XXXXXX)
• Columns: Gene identifiers in GENE_NAME (ENTREZ_ID) format
• Values: Floating-point scores (may contain NaN for genes not screened in a given cell line)
• Companion files: Expression data (OmicsExpressionProteinCodingGenesTPMLogp1BatchCorrected.csv) uses the same index/column format, enabling direct alignment

Different genes have different patterns of missing data across cell lines. This is because not all genes are screened in all cell lines, and quality control may remove specific gene-cell line combinations.

Decision Framework

Question: How should I compute correlations with DepMap CRISPR data?
├── Does the question mention "essentiality" or "dependency"?
│   ├── Yes → Negate CRISPR scores before correlating (see Best Practices #1)
│   └── No (raw gene effect) → Use raw scores directly
├── How should I compute correlations?
│   ├── Per-gene correlation → scipy.stats.spearmanr in a loop (see Best Practices #2)
│   └── Matrix-wide correlation → AVOID; use per-gene loop instead
└── How should I handle missing data?
    ├── Pairwise NaN removal → CORRECT (see Best Practices #3)
    └── Global row/column dropping → INCORRECT; loses too much data

Best Practices

1. Always negate CRISPR scores when the analysis asks about "essentiality": The raw DepMap convention is that negative = essential. When a question or hypothesis refers to "essentiality," "dependency," or "gene importance," negate the scores so that higher values mean more essential. Explicitly state the sign convention in your results.

2. Use scipy.stats.spearmanr per gene in a loop: Bulk matrix shortcuts (DataFrame.corrwith, DataFrame.rank().corrwith()) handle NaN inconsistently across columns. The only reliable method is to compute Spearman correlation gene by gene using scipy.stats.spearmanr with pairwise-complete observations.

3. Apply pairwise NaN removal, not global dropping: Different genes have different missing-data patterns. Dropping rows globally (any NaN in any column) discards far too much data. Instead, for each gene, mask out only the cell lines where either the expression or CRISPR value is NaN.

4. Set a minimum valid-pair threshold: Genes with very few non-NaN cell line pairs produce unreliable correlation estimates. Require at least 10 (preferably 20+) valid pairs before computing a correlation. Skip genes below this threshold.

5. Report NaN summary before analysis: Before computing correlations, print the total NaN count per dataset, the number of common cell lines, and the number of common genes. This provides an audit trail and helps catch data loading errors early.

6. Verify dataset alignment before computation: Always intersect cell line IDs and gene columns between datasets before analysis. Misaligned indices produce silent errors -- correlations computed on mismatched rows are meaningless.

7. State the sign convention explicitly in results: When reporting correlation results, always include a statement like "CRISPR scores were negated so that positive values represent higher essentiality." This prevents downstream misinterpretation.

Common Pitfalls

1. Forgetting to negate CRISPR scores for essentiality analysis: The raw DepMap score convention (negative = essential) is counterintuitive. Omitting the negation reverses every correlation sign, leading to completely inverted conclusions.

   • How to avoid: Always check whether the analysis question uses the word "essentiality" or "dependency." If so, negate the CRISPR scores. Add a comment in the code: # Negate: in DepMap, negative = essential.

2. Using bulk DataFrame correlation methods: Methods like DataFrame.corrwith(method='spearman') or DataFrame.rank().corrwith() silently mishandle NaN values, potentially shifting correlations enough to push genes above or below significance thresholds.

   • How to avoid: Always use a per-gene loop with scipy.stats.spearmanr. See the reference implementation in the Workflow section below.

3. Dropping rows globally instead of pairwise: Calling dropna() on the entire DataFrame before correlation removes all cell lines that have any NaN in any gene, drastically reducing sample size.

   • How to avoid: Apply NaN masking inside the per-gene loop: mask = ~(np.isnan(x) | np.isnan(y)). This preserves the maximum number of observations per gene.

4. Not checking for sufficient valid pairs: Computing Spearman correlation on fewer than 10 observations produces unstable, unreliable estimates that may appear significant by chance.

   • How to avoid: Add a guard clause: if mask.sum() < 10: continue. Adjust the threshold upward (e.g., 20) for more conservative analysis.

5. Misinterpreting correlation signs without stated convention: Reporting "positive correlation" without stating whether CRISPR scores were negated leaves results ambiguous. Reviewers cannot tell if "positive" means "higher expression associates with more essential" or "less essential."

   • How to avoid: Always include a sentence in the results section stating the sign convention used. For example: "CRISPR scores were negated so that positive correlation indicates higher expression is associated with greater essentiality."

6. Failing to align datasets before computation: Expression and CRISPR datasets may have different cell lines or different gene sets. Computing correlations without explicit alignment can silently match wrong rows or produce index errors.

   • How to avoid: Always compute common_lines = expr.index.intersection(crispr.index) and common_genes = expr.columns.intersection(crispr.columns), then subset both DataFrames before any computation.

7. Ignoring the gene column format: DepMap gene columns use the format GENE_NAME (ENTREZ_ID). Attempting to match against plain gene symbols (e.g., TP53 instead of TP53 (7157)) will produce empty intersections.

   • How to avoid: Inspect column formats with df.columns[:5] before attempting any join or intersection. Parse gene names if needed: df.columns.str.extract(r'^(.+?)\s*\(')[0].

Workflow

1. Step 1: Load DepMap data

   import pandas as pd
   
   # Load CRISPR gene effect data
   crispr = pd.read_csv('CRISPRGeneEffect.csv', index_col=0)
   
   # Load expression data
   expr = pd.read_csv(
       'OmicsExpressionProteinCodingGenesTPMLogp1BatchCorrected.csv',
       index_col=0
   )
   
   # Column format: "GENE_NAME (ENTREZ_ID)" e.g., "A1BG (1)"
   # Index: DepMap cell line IDs e.g., "ACH-000001"
   

2. Step 2: Align datasets

   # Find common cell lines and genes
   common_lines = crispr.index.intersection(expr.index)
   common_genes = crispr.columns.intersection(expr.columns)
   
   print(f"Common cell lines: {len(common_lines)}")
   print(f"Common genes: {len(common_genes)}")
   
   # Subset to common
   crispr_aligned = crispr.loc[common_lines, common_genes]
   expr_aligned = expr.loc[common_lines, common_genes]
   

3. Step 3: Report NaN summary

   expr_nan = expr_aligned.isna().sum().sum()
   crispr_nan = crispr_aligned.isna().sum().sum()
   print(f"Expression NaN count: {expr_nan}")
   print(f"CRISPR NaN count: {crispr_nan}")
   

4. Step 4: Negate CRISPR scores if computing essentiality correlations

   # Negate: in DepMap, negative raw score = essential
   # After negation, positive = essential
   essentiality = -crispr_aligned
   

5. Step 5: Compute per-gene NaN-safe Spearman correlation

   from scipy.stats import spearmanr
   import numpy as np
   
   def compute_per_gene_spearman(expression_df, crispr_df, negate_crispr=True):
       """Compute Spearman correlation per gene with proper NaN handling.
   
       Args:
           expression_df: DataFrame (cell_lines x genes)
           crispr_df: DataFrame (cell_lines x genes)
           negate_crispr: If True, negate CRISPR scores to represent essentiality
   
       Returns:
           Series of Spearman correlations indexed by gene name
       """
       # Align cell lines and genes
       common_lines = expression_df.index.intersection(crispr_df.index)
       common_genes = expression_df.columns.intersection(crispr_df.columns)
   
       expr = expression_df.loc[common_lines, common_genes]
       crispr = crispr_df.loc[common_lines, common_genes]
   
       if negate_crispr:
           crispr = -crispr
   
       # Print NaN summary BEFORE analysis
       expr_nan = expr.isna().sum().sum()
       crispr_nan = crispr.isna().sum().sum()
       print(f"Expression NaN count: {expr_nan}")
       print(f"CRISPR NaN count: {crispr_nan}")
       print(f"Common cell lines: {len(common_lines)}")
       print(f"Common genes: {len(common_genes)}")
   
       # Per-gene Spearman correlation with pairwise NaN removal
       correlations = {}
       for gene in common_genes:
           x = expr[gene].values
           y = crispr[gene].values
   
           # Remove pairs where either value is NaN
           mask = ~(np.isnan(x) | np.isnan(y))
           if mask.sum() < 10:  # Skip genes with too few valid pairs
               continue
   
           rho, pval = spearmanr(x[mask], y[mask])
           correlations[gene] = rho
   
       return pd.Series(correlations).sort_values(ascending=False)
   

6. Step 6: Apply threshold and report results

   correlations = compute_per_gene_spearman(expr_aligned, crispr_aligned,
                                            negate_crispr=True)
   
   threshold = 0.6
   strong_positive = correlations[correlations >= threshold]
   strong_negative = correlations[correlations <= -threshold]
   
   print(f"Genes with correlation >= {threshold}: {len(strong_positive)}")
   print(f"Genes with correlation <= -{threshold}: {len(strong_negative)}")
   print(f"\nNote: CRISPR scores were negated so that positive correlation")
   print(f"indicates higher expression associated with greater essentiality.")
   

7. Step 7: Validate -- check for anti-patterns

   Verify that none of these bulk shortcuts were used anywhere in the analysis:

   # WRONG: Bulk rank-then-correlate shortcut
   ranked_expr = expression_df.rank()
   ranked_crispr = crispr_df.rank()
   correlations = ranked_expr.corrwith(ranked_crispr)  # NaN handling is unreliable
   
   # WRONG: Bulk corrwith with method='spearman'
   correlations = expression_df.corrwith(crispr_df, method='spearman')  # Same issue
   

   If any of these patterns appear in the code, replace them with the per-gene loop from Step 5.

Further Reading

• DepMap Portal -- Primary data source for CRISPR gene effect scores, expression data, and other omics datasets across cancer cell lines
• Dempster et al. (2019) -- Chronos algorithm -- Original paper describing the Chronos computational method for estimating gene effect from CRISPR screen data
• DepMap Documentation and Data Downloads -- Detailed file format descriptions, release notes, and download links for all DepMap datasets

Related Skills

• nan-safe-correlation -- General techniques for NaN-safe correlation computation across omics datasets; this guide applies those principles specifically to DepMap CRISPR data
• degenerate-input-filtering -- Upstream data quality filtering to remove low-variance or degenerate features before correlation analysis; recommended as a preprocessing step before DepMap essentiality correlation