Pyats Topology

Topology Discovery

When to Use

• Building network diagrams from scratch (no documentation exists)
• Validating existing documentation matches reality
• Pre-change topology baseline
• Incident response — understanding blast radius
• New device onboarding — mapping where it connects

Discovery Procedure

Step 1: CDP Neighbors (Cisco-to-Cisco)

PYATS_TESTBED_PATH=$PYATS_TESTBED_PATH python3 $MCP_CALL "${PYATS_PYTHON:-python3} -u $PYATS_MCP_SCRIPT" pyats_run_show_command '{"device_name":"R1","command":"show cdp neighbors detail"}'

Extract per neighbor:

• Device ID (hostname)
• Platform and model
• IP address (management address)
• Local interface → Remote interface (link mapping)
• Software version
• Native VLAN (on switch links)
• Duplex

Build adjacency table:

Local Device | Local Interface | Remote Device | Remote Interface | Remote Platform
R1           | Gi0/0/0         | SW1           | Gi1/0/1          | WS-C3850-24T
R1           | Gi0/0/1         | R2            | Gi0/0/0          | ISR4431

Step 2: LLDP Neighbors (Multi-Vendor)

PYATS_TESTBED_PATH=$PYATS_TESTBED_PATH python3 $MCP_CALL "${PYATS_PYTHON:-python3} -u $PYATS_MCP_SCRIPT" pyats_run_show_command '{"device_name":"R1","command":"show lldp neighbors detail"}'

LLDP is IEEE 802.1AB — works with non-Cisco devices (Arista, Juniper, Linux hosts, IP phones, APs). Same adjacency table format as CDP but may include additional TLVs.

Step 3: ARP Table (L3 Neighbor Discovery)

PYATS_TESTBED_PATH=$PYATS_TESTBED_PATH python3 $MCP_CALL "${PYATS_PYTHON:-python3} -u $PYATS_MCP_SCRIPT" pyats_run_show_command '{"device_name":"R1","command":"show arp"}'

Analysis:

• Map IP addresses to MAC addresses on each interface
• Identify directly connected hosts (servers, endpoints, other routers)
• Look for multiple MAC addresses on the same interface (switch segment)
• Incomplete entries indicate devices that are configured but unreachable

Step 4: Routing Protocol Peers

OSPF neighbors = L3 adjacent routers:

PYATS_TESTBED_PATH=$PYATS_TESTBED_PATH python3 $MCP_CALL "${PYATS_PYTHON:-python3} -u $PYATS_MCP_SCRIPT" pyats_run_show_command '{"device_name":"R1","command":"show ip ospf neighbor"}'

BGP peers = logical connections (may be multi-hop):

PYATS_TESTBED_PATH=$PYATS_TESTBED_PATH python3 $MCP_CALL "${PYATS_PYTHON:-python3} -u $PYATS_MCP_SCRIPT" pyats_run_show_command '{"device_name":"R1","command":"show ip bgp summary"}'

EIGRP neighbors:

PYATS_TESTBED_PATH=$PYATS_TESTBED_PATH python3 $MCP_CALL "${PYATS_PYTHON:-python3} -u $PYATS_MCP_SCRIPT" pyats_run_show_command '{"device_name":"R1","command":"show ip eigrp neighbors"}'

Step 5: Interface-to-Subnet Mapping

PYATS_TESTBED_PATH=$PYATS_TESTBED_PATH python3 $MCP_CALL "${PYATS_PYTHON:-python3} -u $PYATS_MCP_SCRIPT" pyats_run_show_command '{"device_name":"R1","command":"show ip interface brief"}'

Build subnet map:

Interface     | IP Address      | Subnet          | Connected Subnet
Gi0/0/0       | 10.1.1.1/30     | 10.1.1.0/30     | R1 <-> SW1 transit
Gi0/0/1       | 10.1.2.1/30     | 10.1.2.0/30     | R1 <-> R2 transit
Loopback0     | 1.1.1.1/32      | 1.1.1.1/32      | Router ID

Step 6: VRF Topology

PYATS_TESTBED_PATH=$PYATS_TESTBED_PATH python3 $MCP_CALL "${PYATS_PYTHON:-python3} -u $PYATS_MCP_SCRIPT" pyats_run_show_command '{"device_name":"R1","command":"show vrf"}'

For each VRF, identify:

• VRF name, RD, RT import/export
• Interfaces assigned to the VRF
• Routes in the VRF routing table

Step 7: FHRP Group Mapping

PYATS_TESTBED_PATH=$PYATS_TESTBED_PATH python3 $MCP_CALL "${PYATS_PYTHON:-python3} -u $PYATS_MCP_SCRIPT" pyats_run_show_command '{"device_name":"R1","command":"show standby brief"}'

Map virtual IPs, active/standby roles, group numbers, and tracking objects.

Building the Topology Model

Combine all discovery data into a unified model:

Topology: NetClaw Discovery - YYYY-MM-DD

Devices:
  R1 (C8000V, IOS-XE 17.x.x)
    Loopback0: 1.1.1.1/32 (Router ID)
    Gi1: 10.1.1.1/30 → R2:Gi1 (OSPF Area 0, cost 1)
    Gi2: 10.1.2.1/24 → SW1:Gi0/1 (Access VLAN 10)

  R2 (ISR4431, IOS-XE 17.x.x) [discovered via CDP]
    Gi1: 10.1.1.2/30 → R1:Gi1
    Gi2: 10.2.1.1/24 → SW2:Gi0/1

Subnets:
  10.1.1.0/30  - R1-R2 transit (OSPF Area 0)
  10.1.2.0/24  - R1 LAN segment (VLAN 10)
  10.2.1.0/24  - R2 LAN segment (VLAN 20)

Routing Adjacencies:
  R1 <-> R2: OSPF (Area 0, FULL)
  R1 <-> ISP: BGP (AS 65001 <-> AS 65000, Established)

FHRP:
  VLAN 10: HSRP Group 10, VIP 10.1.2.254, Active=R1, Standby=R3

Integration with Diagram Tools

After discovery, use this data to generate:

• Draw.io diagrams (via drawio-diagram skill) — for formal network documentation
• Markmap mind maps (via markmap-viz skill) — for hierarchical protocol views
• NVD CVE audit (via nvd-cve skill) — using discovered software versions

NetBox Cable Reconciliation (MISSION02 Enhancement)

When NetBox is available ($NETBOX_MCP_SCRIPT is set), reconcile discovered topology against the source of truth:

Pull NetBox Cables

python3 $MCP_CALL "python3 -u $NETBOX_MCP_SCRIPT" netbox_get_objects '{"object_type":"dcim.cables","filters":{},"limit":200}'

Pull NetBox Devices

python3 $MCP_CALL "python3 -u $NETBOX_MCP_SCRIPT" netbox_get_objects '{"object_type":"dcim.devices","filters":{},"brief":true}'

Pull NetBox Interfaces

python3 $MCP_CALL "python3 -u $NETBOX_MCP_SCRIPT" netbox_get_objects '{"object_type":"dcim.interfaces","filters":{"device":"R1"}}'

Reconciliation Categories

Compare CDP/LLDP discovered neighbors against NetBox cables:

Color-Coded Draw.io Diagram

Generate a Draw.io topology diagram with links color-coded by reconciliation status:

• Green: DOCUMENTED
• Yellow: UNDOCUMENTED
• Red: MISSING
• Orange: MISMATCH

Fleet-Wide Discovery (pCall)

Run CDP/LLDP/ARP/routing peer collection across ALL devices simultaneously using multiple exec commands. Merge results to build the complete topology graph.

GAIT Audit Trail

Record the topology discovery in GAIT:

python3 $MCP_CALL "python3 -u $GAIT_MCP_SCRIPT" gait_record_turn '{"input":{"role":"assistant","content":"Topology discovery completed: 5 devices, 12 links. NetBox reconciliation: 10 documented, 1 undocumented, 1 missing.","artifacts":[]}}'