Sadd:tree Of Thoughts

tree-of-thoughts

Pattern: Tree of Thoughts (ToT)

This command implements a six-phase systematic reasoning pattern with adaptive strategy selection:

Phase 1: Exploration (Propose Approaches)
         ┌─ Agent A → Proposals A1, A2 (with probabilities) ─┐
Task ───┼─ Agent B → Proposals B1, B2 (with probabilities) ─┼─┐
         └─ Agent C → Proposals C1, C2 (with probabilities) ─┘ │
                                                                │
Phase 2: Pruning (Vote for Best 3)                             │
         ┌─ Judge 1 → Votes + Rationale ─┐                     │
         ├─ Judge 2 → Votes + Rationale ─┼─────────────────────┤
         └─ Judge 3 → Votes + Rationale ─┘                     │
                 │                                              │
                 ├─→ Select Top 3 Proposals                     │
                 │                                              │
Phase 3: Expansion (Develop Full Solutions)                    │
         ┌─ Agent A → Solution A (from proposal X) ─┐          │
         ├─ Agent B → Solution B (from proposal Y) ─┼──────────┤
         └─ Agent C → Solution C (from proposal Z) ─┘          │
                                                                │
Phase 4: Evaluation (Judge Full Solutions)                     │
         ┌─ Judge 1 → Report 1 ─┐                              │
         ├─ Judge 2 → Report 2 ─┼──────────────────────────────┤
         └─ Judge 3 → Report 3 ─┘                              │
                                                                │
Phase 4.5: Adaptive Strategy Selection                         │
         Analyze Consensus ────────────────────────────────────┤
                ├─ Clear Winner? → SELECT_AND_POLISH           │
                ├─ All Flawed (<3.0)? → REDESIGN (Phase 3)     │
                └─ Split Decision? → FULL_SYNTHESIS            │
                                         │                      │
Phase 5: Synthesis (Only if FULL_SYNTHESIS)                    │
         Synthesizer ────────────────────┴──────────────────────┴─→ Final Solution

Process

Setup: Create Directory Structure

Before starting, ensure the directory structure exists:

mkdir -p .specs/research .specs/reports

Naming conventions:

• Proposals: .specs/research/{solution-name}-{YYYY-MM-DD}.proposals.[a|b|c].md
• Pruning: .specs/research/{solution-name}-{YYYY-MM-DD}.pruning.[1|2|3].md
• Selection: .specs/research/{solution-name}-{YYYY-MM-DD}.selection.md
• Evaluation: .specs/reports/{solution-name}-{YYYY-MM-DD}.[1|2|3].md

Where:

• {solution-name} - Derived from output path (e.g., users-api from output specs/api/users.md)
• {YYYY-MM-DD} - Current date

Note: Solutions remain in their specified output locations; only research and evaluation files go to .specs/

Phase 1: Exploration (Propose Approaches)

Launch 3 independent agents in parallel (recommended: Sonnet for speed):

1. Each agent receives identical task description and context
2. Each agent generates 6 high-level approaches (not full implementations)
3. For each approach, agent provides:
   • Approach description (2-3 paragraphs)
   • Key design decisions and trade-offs
   • Probability estimate (0.0-1.0)
   • Estimated complexity (low/medium/high)
   • Potential risks and failure modes
4. Proposals saved to .specs/research/{solution-name}-{date}.proposals.[a|b|c].md

Key principle: Systematic exploration through probabilistic sampling from the full distribution of possible approaches.

Prompt template for explorers:

<task>
{task_description}
</task>

<constraints>
{constraints_if_any}
</constraints>

<context>
{relevant_context}
</context>

<output>
{.specs/research/{solution-name}-{date}.proposals.[a|b|c].md - each agent gets unique letter identifier}
</output>

Instructions:

Let's approach this systematically by first understanding what we're solving, then exploring the solution space.

**Step 1: Decompose the problem**
Before generating approaches, break down the task:
- What is the core problem being solved?
- What are the key constraints and requirements?
- What subproblems must any solution address?
- What are the evaluation criteria for success?

**Step 2: Map the solution space**
Identify the major dimensions along which solutions can vary:
- Architecture patterns (e.g., monolithic vs distributed)
- Implementation strategies (e.g., eager vs lazy)
- Trade-off axes (e.g., performance vs simplicity)

**Step 3: Generate 6 distinct high-level approaches**

**Sampling guidance:**
Please sample approaches at random from the [full distribution / tails of the distribution]
- For first 3 approaches aim for high probability, over 0.80
- For last 3 approaches aim for diversity - explore different regions of the solution space, such that the probability of each response is less than 0.10

For each approach, provide:
   - Name and one-sentence summary
   - Detailed description (2-3 paragraphs)
   - Key design decisions and rationale
   - Trade-offs (what you gain vs what you sacrifice)
   - Probability (0.0-1.0)
   - Complexity estimate (low/medium/high)
   - Potential risks and failure modes

**Step 4: Verify diversity**
Before finalizing, check:
- Are approaches genuinely different, not minor variations?
- Do they span different regions of the solution space?
- Have you covered both conventional and unconventional options?


CRITICAL:
- Do NOT implement full solutions yet - only high-level approaches
- Ensure approaches are genuinely different, not minor variations

Phase 2: Pruning (Vote for Top 3 Candidates)

Launch 3 independent judges in parallel (recommended: Sonnet for efficiency):

1. Each judge receives ALL proposal files (from .specs/research/)
2. Judges evaluate each proposal against pruning criteria:
   • Feasibility (1-5): Can this be implemented with available resources?
   • Alignment (1-5): How well does it address the task requirements?
   • Potential (1-5): Likelihood of producing high-quality result?
   • Risk (1-5, inverse): How manageable are the identified risks?
3. Each judge produces:
   • Scores for each proposal (with evidence)
   • Vote for top 3 proposals to expand
   • Rationale for selections
4. Votes saved to .specs/research/{solution-name}-{date}.pruning.[1|2|3].md

Key principle: Independent evaluation with explicit criteria reduces groupthink and catches different strengths/weaknesses.

Prompt template for pruning judges:

You are evaluating {N} proposed approaches to select the top 3 for full development.

<task>
{task_description}
</task>

<proposals>
{list of paths to all proposal files}
Read all proposals carefully before evaluating.
</proposals>

<output>
{.specs/research/{solution-name}-{date}.pruning.[1|2|3].md - each judge gets unique number identifier}
</output>

Evaluation criteria (with weights):
1. Feasibility (25%): Can this be implemented with available resources and constraints?
2. Alignment (30%): How well does it address the task requirements and constraints?
3. Potential (30%): Likelihood of producing a high-quality, robust solution?
4. Risk (15%): How manageable are the identified risks and failure modes?

Read ${CLAUDE_PLUGIN_ROOT}/tasks/judge.md for evaluation methodology and execute using following criteria.

Instructions:
1. For each proposal, score on each criterion (1-5)
2. Provide specific evidence from the proposal for each score
3. Calculate weighted total score for each proposal
4. Vote for your top 3 proposals with clear justification
5. Consider:
   - Does the probability estimate seem realistic?
   - Are the trade-offs clearly articulated?
   - Are risks identified and addressable?
6. Generate verification 4-6 questions about your evaluation.
7. Answer verification questions:
   - Re-examine solutions for each question
   - Find counter-evidence if it exists
   - Check for systematic bias (length, confidence, etc.)
8. Revise your evaluation and update it accordingly.

Output format:
- Evaluation table with scores for all proposals
- Top 3 selections with rationale
- Any concerns or questions about selected proposals

CRITICAL:
- Base your evaluation on evidence from proposals, not assumptions
- Your top 3 should be ranked: 1st choice, 2nd choice, 3rd choice

Phase 2b: Select Top 3 Proposals

After judges complete voting:

1. Aggregate votes using ranked choice:
   • 1st choice = 3 points
   • 2nd choice = 2 points
   • 3rd choice = 1 point
2. Select top 3 proposals by total points
3. Handle ties by comparing average scores across criteria
4. Document selection in .specs/research/{solution-name}-{date}.selection.md:
   • Vote tallies
   • Selected proposals
   • Consensus rationale

Phase 3: Expansion (Develop Full Solutions)

Launch 3 independent agents in parallel (recommended: Opus for quality):

1. Each agent receives:
   • One selected proposal to expand
   • Original task description and context
   • Judge feedback from pruning phase (concerns, questions)
2. Agent produces complete solution implementing the proposal:
   • Full implementation details
   • Addresses concerns raised by judges
   • Documents key decisions made during expansion
3. Solutions saved to solution.a.md, solution.b.md, solution.c.md

Key principle: Focused development of validated approaches with awareness of evaluation feedback.

Prompt template for expansion agents:

You are developing a full solution based on a selected proposal.

<task>
{task_description}
</task>

<selected_proposal>
{write selected proposal EXACTLY as it is. Including all details provided by the agent}
Read this carefully - it is your starting point.
</selected_proposal>

<judge_feedback>
{concerns and questions from judges about this proposal}
Address these in your implementation.
</judge_feedback>

<output>
solution.[*].md where [*] is your unique identifier (a, b, or c)
</output>

Instructions:

Let's work through this systematically to ensure we build a complete, high-quality solution.

**Step 1: Understand the proposal deeply**
Before implementing, analyze:
- What is the core insight or approach of this proposal?
- What are the key design decisions already made?
- What gaps need to be filled for a complete solution?

**Step 2: Address judge feedback**
For each concern raised by judges:
- What specific change or addition addresses this concern?
- How does this change integrate with the proposal's approach?

**Step 3: Decompose into implementation subproblems**
Break the solution into logical parts:
- What are the main components or sections?
- What must be defined first for other parts to build upon?
- What are the dependencies between parts?

**Step 4: Implement each subproblem**
For each component, work through:
- Core functionality and behavior
- Edge cases and error handling
- Integration points with other components

**Step 5: Self-verification**
Generate 3-5 verification questions about critical aspects, then answer them:
- Review solution against each question
- Identify gaps or weaknesses
- Fix identified issues

**Step 6: Document changes**
Explain what was changed from the original proposal and why.

<example>
**Example of good expansion thinking:**

Proposal: "Use event-driven architecture with message queue"

Step 1 Analysis:
- Core insight: Decouple components via async messaging
- Key decisions: Events as primary communication, eventual consistency
- Gaps: Need to define event schemas, queue technology, error handling

Step 2 - Addressing judge concern "What about message ordering?":
- Add partition keys for ordered processing within entity scope
- Document ordering guarantees and limitations

Step 3 - Subproblems:
1. Event schema definitions (foundational - others depend on this)
2. Producer interfaces (depends on schemas)
3. Consumer handlers (depends on schemas)
4. Error handling and dead letter queues (depends on both)
5. Integration patterns (builds on all above)
</example>

CRITICAL:
- Stay faithful to the selected proposal's core approach
- Do not switch to a different approach midway
- Address judge feedback explicitly
- Produce a complete, implementable solution

Phase 4: Evaluation (Judge Full Solutions)

Launch 3 independent judges in parallel (recommended: Opus for rigor):

1. Each judge receives ALL solution files (solution.a.md, solution.b.md, solution.c.md)
2. Judges evaluate against final criteria (task-specific):
   • Correctness (weight based on task)
   • Completeness (weight based on task)
   • Quality (design, maintainability, etc.)
   • Feasibility (can this be implemented?)
3. Each judge produces:
   • Comparative analysis (which solution excels where)
   • Evidence-based ratings (with specific quotes/examples)
   • Final vote (which solution they prefer and why)
4. Reports saved to .specs/reports/{solution-name}-{date}.[1|2|3].md

Key principle: Multiple independent evaluations with explicit evidence reduce bias and catch different quality aspects.

Prompt template for evaluation judges:

You are evaluating {number} full solutions to this task:

<task>
{task_description}
</task>

<solutions>
{list of paths to all solution files}
Read all solutions carefully before evaluating.
</solutions>

<output>
Write full report to: .specs/reports/{solution-name}-{date}.[1|2|3].md - each judge gets unique number identifier

CRITICAL: You must reply with this exact structured header format:

---
VOTE: [Solution A/B/C]
SCORES:
  Solution A: [X.X]/5.0
  Solution B: [X.X]/5.0
  Solution C: [X.X]/5.0
CRITERIA:
 - {criterion_1}: [X.X]/5.0
 - {criterion_2}: [X.X]/5.0
 ...
---

[Summary of your evaluation]
</output>

Evaluation criteria (with weights):
1. {criterion_1} ({weight_1}%)
2. {criterion_2} ({weight_2}%)
3. {criterion_3} ({weight_3}%)
...

Read ${CLAUDE_PLUGIN_ROOT}/tasks/judge.md for evaluation methodology and execute using following criteria.

Instructions:
1. For each criterion, analyze ALL solutions
2. Write a combined report:
   - Provide specific evidence (quote exact text) for your assessments
   - Compare strengths and weaknesses
   - Score each solution on each criterion (1-5)
   - Calculate weighted total scores
3. Generate verification 4-6 questions about your evaluation.
4. Answer verification questions:
   - Re-examine solutions for each question
   - Find counter-evidence if it exists
   - Check for systematic bias (length, confidence, etc.)
5. Revise your evaluation and update it accordingly.
6. Reply structured output:
   - VOTE: Which solution you recommend
   - SCORES: Weighted total score for each solution (0.0-5.0)

CRITICAL: Base your evaluation on evidence, not impressions. Quote specific text.

Final checklist:
- [ ] Generated and answered all verification questions
- [ ] Found and corrected all potential issues
- [ ] Checked for known biases (length, verbosity, confidence)
- [ ] Confident in revised evaluation
- [ ] Structured header with VOTE and SCORES at top of report

Phase 4.5: Adaptive Strategy Selection (Early Return)

The orchestrator (not a subagent) analyzes judge outputs to determine the optimal strategy.

Decision Logic

Step 1: Parse structured headers from judge reply

Parse the judges reply. CRITICAL: Do not read report files themselves, as they can overflow your context.

Step 2: Check for unanimous winner

Compare all three VOTE values:

• If Judge 1 VOTE = Judge 2 VOTE = Judge 3 VOTE (same solution):
  • Strategy: SELECT_AND_POLISH
  • Reason: Clear consensus - all three judges prefer same solution

Step 3: Check if all solutions are fundamentally flawed

If no unanimous vote, calculate average scores:

1. Average Solution A scores: (Judge1_A + Judge2_A + Judge3_A) / 3
2. Average Solution B scores: (Judge1_B + Judge2_B + Judge3_B) / 3
3. Average Solution C scores: (Judge1_C + Judge2_C + Judge3_C) / 3

If (avg_A < 3.0) AND (avg_B < 3.0) AND (avg_C < 3.0):

• Strategy: REDESIGN
• Reason: All solutions below quality threshold, fundamental approach issues

Step 4: Default to full synthesis

If none of the above conditions met:

• Strategy: FULL_SYNTHESIS
• Reason: Split decision with merit, synthesis needed to combine best elements

Strategy 1: SELECT_AND_POLISH

When: Clear winner (unanimous votes)

Process:

1. Select the winning solution as the base
2. Launch subagent to apply specific improvements from judge feedback
3. Cherry-pick 1-2 best elements from runner-up solutions
4. Document what was added and why

Benefits:

• Saves synthesis cost (simpler than full synthesis)
• Preserves proven quality of winning solution
• Focused improvements rather than full reconstruction

Prompt template:

You are polishing the winning solution based on judge feedback.

<task>
{task_description}
</task>

<winning_solution>
{path_to_winning_solution}
Score: {winning_score}/5.0
Judge consensus: {why_it_won}
</winning_solution>

<runner_up_solutions>
{list of paths to all runner-up solutions}
</runner_up_solutions>

<judge_feedback>
{list of paths to all evaluation reports}
</judge_feedback>

<output>
{final_solution_path}
</output>

Instructions:

Let's approach this polishing task methodically to improve without disrupting what works.

**Step 1: Understand why this solution won**
Analyze the winning solution:
- What are its core strengths that judges praised?
- What makes its approach superior to alternatives?
- Which parts should remain untouched?

**Step 2: Catalog improvement opportunities**
From judge feedback, identify:
- Specific weaknesses mentioned (list each one)
- Missing elements judges noted
- Areas where runner-ups were praised

**Step 3: Prioritize changes by impact**
For each improvement opportunity:
- High impact: Directly addresses judge criticism
- Medium impact: Adds praised element from runner-up
- Low impact: Nice-to-have refinement

Focus on high-impact changes first.

**Step 4: Apply improvements surgically**
For each change:
- Locate the specific section to modify
- Make the minimal change needed to address the issue
- Verify the change integrates cleanly with surrounding content

**Step 5: Cherry-pick from runners-up**
Review runner-up solutions for:
- 1-2 specific elements that judges praised
- Elements that complement (not conflict with) the winning approach
- Only incorporate if clearly superior to winning solution's version

**Step 6: Document all changes**
Record:
- What was changed and why (with reference to judge feedback)
- What was added from other solutions (cite source)
- What was intentionally left unchanged

CRITICAL: Preserve the winning solution's core approach. Make targeted improvements only.

Strategy 2: REDESIGN

When: All solutions scored <3.0/5.0 (fundamental issues across the board)

Process:

1. Launch new agent to analyze the failure modes and lessons learned
2. Return to Phase 3 (Expansion), provide to new implementation agents the lessons learned and new constraints

Note: If redesign fails twice, escalate to user for guidance.

Prompt template for new implementation:

You are analyzing why all solutions failed to meet quality standards, to inform a redesign. And implement new solution based on it.


<task>
{task_description}
</task>

<constraints>
{constraints_if_any}
</constraints>

<context>
{relevant_context}
</context>

<failed_solutions>
{list of paths to all solution files}
Average scores: A={avg_a}/5.0, B={avg_b}/5.0, C={avg_c}/5.0
</failed_solutions>

<evaluation_reports>
{list of paths to all evaluation reports}
All solutions scored below 3.0/5.0 threshold.
</evaluation_reports>

<output>
.specs/research/{solution-name}-{date}.redesign-analysis.md
</output>

Instructions:
Let's break this down systematically to understand what went wrong and how to design new solution based on it.

1. First, analyze the task carefully - what is being asked and what are the key requirements?
2. Read through each solution and its evaluation report
3. For each solution, think step by step about:
   - What was the core approach?
   - What specific issues did judges identify?
   - Why did this approach fail to meet the quality threshold?
4. Identify common failure patterns across all solutions:
   - Are there shared misconceptions?
   - Are there missing requirements that all solutions overlooked?
   - Are there fundamental constraints that weren't considered?
5. Extract lessons learned:
   - What approaches should be avoided?
   - What constraints must be addressed?
6. Generate improved guidance for the next iteration:
   - New constraints to add
   - Specific approaches to try - what are the different ways to solve this?
   - Key requirements to emphasize
7. Think through the tradeoffs step by step and choose the approach you believe is best
8. Implement it completely
9. Generate 5 verification questions about critical aspects
10. Answer your own questions:
   - Review solution against each question
   - Identify gaps or weaknesses
11. Revise solution:
   - Fix identified issues
12. Explain what was changed and why

Strategy 3: FULL_SYNTHESIS (Default)

When: No clear winner AND solutions have merit (scores ≥3.0)

Process: Proceed to Phase 5 (Evidence-Based Synthesis)

Phase 5: Synthesis (Evidence-Based Combination)

Only executed when Strategy 3 (FULL_SYNTHESIS) selected in Phase 4.5

Launch 1 synthesis agent (recommended: Opus for quality):

1. Agent receives:
   • All solutions (from specified output location)
   • All evaluation reports (from .specs/reports/)
   • Selection rationale from pruning phase (from .specs/research/)
2. Agent analyzes:
   • Consensus strengths (what multiple judges praised)
   • Consensus weaknesses (what multiple judges criticized)
   • Complementary elements where solutions took different approaches
3. Agent produces final solution by:
   • Copying superior sections when one solution clearly wins
   • Combining approaches when hybrid is better
   • Fixing identified issues that judges caught
   • Documenting decisions (what was taken from where and why)

Key principle: Evidence-based synthesis leverages collective intelligence from exploration and evaluation.

Prompt template for synthesizer:

You are synthesizing the best solution from explored, pruned, and evaluated implementations.

<task>
{task_description}
</task>

<solutions>
{list of paths to all solution files}
</solutions>

<evaluation_reports>
{list of paths to all evaluation reports}
</evaluation_reports>

<selection_rationale>
{path to selection.md explaining why these proposals were chosen}
</selection_rationale>

<output>
{output_path} - The final synthesized solution
</output>

Instructions:

Let's approach this synthesis systematically by first analyzing, then decomposing, then building.

**Step 1: Build the evidence base**
Before synthesizing, gather evidence from judge reports:
- What did multiple judges praise? (consensus strengths)
- What did multiple judges criticize? (consensus weaknesses)
- Where did judges disagree? (areas needing careful analysis)

**Step 2: Decompose into synthesis subproblems**
Break the solution into logical sections or components. For each component:
- Which solution handles this best? (cite evidence)
- Are there complementary elements from multiple solutions?
- What issues were identified that need fixing?

**Step 3: Solve each subproblem**
For each component/section, determine the synthesis strategy:

*Strategy A - Clear winner:* If one solution is clearly superior for this component:
- Copy that section directly
- Document: "Taken from Solution X because [judge evidence]"

*Strategy B - Complementary combination:* If solutions have complementary strengths:
- Identify what each contributes
- Combine carefully, ensuring consistency
- Document: "Combined X from Solution A with Y from Solution B because [rationale]"

*Strategy C - All flawed:* If all solutions have issues in this area:
- Start with the best version
- Apply fixes based on judge criticism
- Document: "Based on Solution X, modified to address [specific issues]"

**Step 4: Integrate and verify consistency**
After synthesizing all components:
- Check that combined elements work together
- Resolve any contradictions between borrowed sections
- Ensure consistent terminology and style

**Step 5: Document synthesis decisions**
Create a synthesis log:
- What you took from each solution (with specific citations)
- Why you made those choices (reference judge feedback)
- How you addressed identified weaknesses
- Any novel combinations or improvements

<example>
**Example synthesis decision for an API design:**

Component: Authentication flow
- Solution A: JWT with refresh tokens (praised for security by 2/3 judges)
- Solution B: Session-based (praised for simplicity by 1 judge, criticized for scalability)
- Solution C: OAuth2 only (criticized as over-engineered for use case)

Decision: Take Solution A's authentication flow directly.
Evidence: Judges 1 and 3 both noted "JWT approach provides good balance of security and statelessness"
Modification: None needed - this section was rated highest across judges.
</example>

**Step 6: Revise your solution**
- Generate 5 verification questions about critical aspects
- Answer your own questions:
   - Review solution against each question
   - Identify gaps or weaknesses
- Revise solution:
   - Fix identified issues
- Explain what was changed and why


CRITICAL:
- Do not create something entirely new - synthesize the best from what exists
- Cite your sources (which solution, which section)
- Explain every major decision
- Address all consensus weaknesses identified by judges

Outputs (All Strategies)

1. Research directory: .specs/research/ (created if not exists)

   • Proposals: .specs/research/{solution-name}-{date}.proposals.[a|b|c].md - High-level approaches with probabilities
   • Pruning: .specs/research/{solution-name}-{date}.pruning.[1|2|3].md - Judge evaluations and votes
   • Selection: .specs/research/{solution-name}-{date}.selection.md - Vote tallies and selected proposals

2. Expansion outputs:

   • solution.a.md, solution.b.md, solution.c.md - Full implementations (in specified output location)

3. Reports directory: .specs/reports/ (created if not exists)

   • Evaluation: .specs/reports/{solution-name}-{date}.[1|2|3].md - Final judge reports

4. Resulting solution: {output_path}

Strategy-Specific Outputs

• SELECT_AND_POLISH: Polished solution based on winning solution, with targeted improvements
• REDESIGN: Do not stop; return to Phase 3 with lessons learned; eventually finishes at SELECT_AND_POLISH or FULL_SYNTHESIS
• FULL_SYNTHESIS: Synthesized solution combining best elements from all solutions

Best Practices

Evaluation Criteria by Task Type

Code implementation tasks:

• Correctness (35%)
• Design quality (25%)
• Maintainability (20%)
• Performance (10%)
• Clarity (10%)

Architecture/design tasks:

• Completeness (30%)
• Feasibility (25%)
• Scalability (20%)
• Simplicity (15%)
• Clarity (10%)

Research/analysis tasks:

• Depth (35%)
• Accuracy (30%)
• Completeness (20%)
• Actionability (15%)

Documentation tasks:

• Completeness (35%)
• Accuracy (30%)
• Clarity (20%)
• Usability (15%)

Common Pitfalls

❌ Insufficient exploration - Agents propose similar approaches ❌ Weak pruning criteria - Judges can't differentiate quality ❌ Ignoring judge feedback - Expansion ignores concerns from pruning ❌ Vague proposals - Can't properly evaluate without implementation details ❌ Over-exploration - Too many proposals, evaluation becomes expensive ❌ Forcing synthesis when clear winner exists - Wastes cost and risks degrading quality ❌ Synthesizing fundamentally flawed solutions - Better to redesign than polish garbage

✅ Encourage diverse exploration - Prompt for different regions of solution space ✅ Clear pruning criteria - Specific, measurable evaluation dimensions ✅ Feed feedback forward - Expansion agents address pruning concerns ✅ Right level of detail - Proposals have enough detail to evaluate ✅ Prune aggressively - Only expand most promising 3 approaches ✅ Trust adaptive strategy selection - Polish clear winners, synthesize split decisions, redesign failures

Example: API Design

/tree-of-thoughts "Design REST API for user management (CRUD + auth)" \
  --output "specs/api/users.md" \
  --criteria "RESTfulness,security,scalability,developer-experience"

Phase 1 outputs (assuming date 2025-01-15):

• .specs/research/users-api-2025-01-15.proposals.a.md - 3 approaches: Resource-based (0.35), Action-based (0.25), HATEOAS (0.15)
• .specs/research/users-api-2025-01-15.proposals.b.md - 3 approaches: GraphQL-first (0.20), REST+GraphQL hybrid (0.30), Pure REST (0.40)
• .specs/research/users-api-2025-01-15.proposals.c.md - 3 approaches: Microservices (0.25), Monolithic (0.45), Hybrid (0.20)

Phase 2 outputs:

• .specs/research/users-api-2025-01-15.pruning.1.md - Top 3: Resource-based REST, Pure REST, Monolithic
• .specs/research/users-api-2025-01-15.pruning.2.md - Top 3: Pure REST, Hybrid (services), Resource-based REST
• .specs/research/users-api-2025-01-15.pruning.3.md - Top 3: Resource-based REST, REST+GraphQL hybrid, Pure REST
• .specs/research/users-api-2025-01-15.selection.md - Selected: Resource-based REST (8 pts), Pure REST (7 pts), Monolithic (4 pts)

Phase 3 outputs:

• specs/api/users.a.md - Full resource-based design with nested routes
• specs/api/users.b.md - Flat REST design with simple endpoints
• specs/api/users.c.md - Monolithic API with service-oriented internals

Phase 4 outputs:

• .specs/reports/users-api-2025-01-15.1.md:

  VOTE: Solution A
  SCORES: A=4.2/5.0, B=3.8/5.0, C=3.4/5.0
  

  "Prefers A for RESTfulness, criticizes C complexity"

• .specs/reports/users-api-2025-01-15.2.md:

  VOTE: Solution B
  SCORES: A=3.9/5.0, B=4.1/5.0, C=3.5/5.0
  

  "Prefers B for simplicity, criticizes A deep nesting"

• .specs/reports/users-api-2025-01-15.3.md:

  VOTE: Solution A
  SCORES: A=4.3/5.0, B=3.6/5.0, C=3.2/5.0
  

  "Prefers A for discoverability, criticizes B lack of structure"

Phase 4.5 decision (orchestrator parses headers):

• Split votes: A, B, A (no unanimous winner)
• Average scores: A=4.1, B=3.8, C=3.4 (all ≥3.0)
• Strategy: FULL_SYNTHESIS
• Reason: Split decision with merit, synthesis needed

Phase 5 output (synthesis):

• specs/api/users.md - Resource-based structure (from A), max 2-level nesting (from B), internal services (from C)