Kata Remove Phase

Purpose: Clean removal of work you've decided not to do, without polluting context with cancelled/deferred markers. Output: Phase deleted, all subsequent phases renumbered, git commit as historical record.

If no argument provided:

ERROR: Phase number required
Usage: /kata-remove-phase <phase-number>
Example: /kata-remove-phase 17

Exit.

If ROADMAP.md exists, check format and auto-migrate if old:

if [ -f .planning/ROADMAP.md ]; then
  node scripts/kata-lib.cjs check-roadmap 2>/dev/null
  FORMAT_EXIT=$?
  
  if [ $FORMAT_EXIT -eq 1 ]; then
    echo "Old roadmap format detected. Running auto-migration..."
  fi
fi

If exit code 1 (old format):

Invoke kata-doctor in auto mode:

Skill("kata-doctor", "--auto")

Continue after migration completes.

If exit code 0 or 2: Continue silently.

cat .planning/STATE.md 2>/dev/null
cat .planning/ROADMAP.md 2>/dev/null

Parse current phase number from STATE.md "Current Position" section.

1. Search for ### Phase {target}: heading

2. If not found:

   ERROR: Phase {target} not found in roadmap
   Available phases: [list phase numbers]
   

   Exit.

1. Compare target phase to current phase from STATE.md
2. Target must be > current phase number

If target <= current phase:

ERROR: Cannot remove Phase {target}

Only future phases can be removed:
- Current phase: {current}
- Phase {target} is current or completed

To abandon current work, use /kata-pause-work instead.

Exit.

3. Find and check for SUMMARY.md files in phase directory:

# Universal phase discovery for target phase
PADDED_TARGET=$(printf "%02d" "$TARGET" 2>/dev/null || echo "$TARGET")
PHASE_DIR=""
for state in active pending completed; do
  PHASE_DIR=$(find .planning/phases/${state} -maxdepth 1 -type d -name "${PADDED_TARGET}-*" 2>/dev/null | head -1)
  [ -z "$PHASE_DIR" ] && PHASE_DIR=$(find .planning/phases/${state} -maxdepth 1 -type d -name "${TARGET}-*" 2>/dev/null | head -1)
  [ -n "$PHASE_DIR" ] && break
done
# Fallback: flat directory (backward compatibility)
if [ -z "$PHASE_DIR" ]; then
  PHASE_DIR=$(find .planning/phases -maxdepth 1 -type d -name "${PADDED_TARGET}-*" 2>/dev/null | head -1)
  [ -z "$PHASE_DIR" ] && PHASE_DIR=$(find .planning/phases -maxdepth 1 -type d -name "${TARGET}-*" 2>/dev/null | head -1)
fi

find "${PHASE_DIR}" -maxdepth 1 -name "*-SUMMARY.md" 2>/dev/null

If any SUMMARY.md files exist:

ERROR: Phase {target} has completed work

Found executed plans:
- {list of SUMMARY.md files}

Cannot remove phases with completed work.

Exit.

1. Extract phase name from ROADMAP.md heading: ### Phase {target}: {Name}
2. Phase directory already found via universal discovery: ${PHASE_DIR}
3. Find all subsequent phases (searching across active/pending/completed subdirectories) (integer and decimal) that need renumbering

Subsequent phase detection:

For integer phase removal (e.g., 17):

• Find all phases > 17 (integers: 18, 19, 20...)
• Find all decimal phases >= 17.0 and < 18.0 (17.1, 17.2...) → these become 16.x
• Find all decimal phases for subsequent integers (18.1, 19.1...) → renumber with their parent

For decimal phase removal (e.g., 17.1):

• Find all decimal phases > 17.1 and < 18 (17.2, 17.3...) → renumber down
• Integer phases unchanged

List all phases that will be renumbered.

Removing Phase {target}: {Name}

This will:
- Delete: ${PHASE_DIR}
- Renumber {N} subsequent phases:
  - Phase 18 → Phase 17
  - Phase 18.1 → Phase 17.1
  - Phase 19 → Phase 18
  [etc.]

Proceed? (y/n)

Wait for confirmation.

if [ -d "${PHASE_DIR}" ]; then
  rm -rf "${PHASE_DIR}"
  echo "Deleted: ${PHASE_DIR}"
fi

If directory doesn't exist, note: "No directory to delete (phase not yet created)"

For each phase directory that needs renumbering (in reverse order to avoid conflicts):

Find each subsequent phase using universal discovery, then rename within the same state subdirectory:

# For each subsequent phase, find it across state subdirectories
for state in active pending completed; do
  # Example: renaming 18-dashboard to 17-dashboard within the same state dir
  SRC=$(find .planning/phases/${state} -maxdepth 1 -type d -name "18-dashboard" 2>/dev/null | head -1)
  [ -n "$SRC" ] && mv "$SRC" ".planning/phases/${state}/17-dashboard"
done
# Fallback: flat directory
SRC=$(find .planning/phases -maxdepth 1 -type d -name "18-dashboard" 2>/dev/null | head -1)
[ -n "$SRC" ] && mv "$SRC" ".planning/phases/17-dashboard"

Process in descending order (20→19, then 19→18, then 18→17) to avoid overwriting.

Also rename decimal phase directories:

• 17.1-fix-bug → 16.1-fix-bug (if removing integer 17)
• 17.2-hotfix → 17.1-hotfix (if removing decimal 17.1)

For each renumbered directory, rename files that contain the phase number:

# Inside 17-dashboard (was 18-dashboard):
mv "18-01-PLAN.md" "17-01-PLAN.md"
mv "18-02-PLAN.md" "17-02-PLAN.md"
mv "18-01-SUMMARY.md" "17-01-SUMMARY.md"  # if exists
# etc.

Also handle CONTEXT.md and DISCOVERY.md (these don't have phase prefixes, so no rename needed).

1. Remove the phase section entirely:

   • Delete from ### Phase {target}: to the next phase heading (or section end)

2. Remove from phase list:

   • Delete line - [ ] **Phase {target}: {Name}** or similar

3. Remove from Progress table:

   • Delete the row for Phase {target}

4. Renumber all subsequent phases:

   • ### Phase 18: → ### Phase 17:
   • - [ ] **Phase 18: → - [ ] **Phase 17:
   • Table rows: | 18. Dashboard | → | 17. Dashboard |
   • Plan references: 18-01: → 17-01:

5. Update dependency references:

   • **Depends on:** Phase 18 → **Depends on:** Phase 17
   • For the phase that depended on the removed phase:
     • **Depends on:** Phase 17 (removed) → **Depends on:** Phase 16

6. Renumber decimal phases:

   • ### Phase 17.1: → ### Phase 16.1: (if integer 17 removed)
   • Update all references consistently

Write updated ROADMAP.md.

1. Update total phase count:

   • Phase: 16 of 20 → Phase: 16 of 19

2. Recalculate progress percentage:

   • New percentage based on completed plans / new total plans

Do NOT add a "Roadmap Evolution" note - the git commit is the record.

Write updated STATE.md.

# Find files that reference the old phase numbers (search across state subdirectories)
for state in active pending completed; do
  grep -r "Phase 18" .planning/phases/${state}/17-*/ 2>/dev/null
  grep -r "Phase 19" .planning/phases/${state}/18-*/ 2>/dev/null
done
# Fallback: flat directories
grep -r "Phase 18" .planning/phases/17-*/ 2>/dev/null
grep -r "Phase 19" .planning/phases/18-*/ 2>/dev/null
# etc.

Update any internal references to reflect new numbering.

Check planning config:

COMMIT_PLANNING_DOCS=$(node scripts/kata-lib.cjs read-config "commit_docs" "true")
git check-ignore -q .planning 2>/dev/null && COMMIT_PLANNING_DOCS=false

If COMMIT_PLANNING_DOCS=false: Skip git operations

If COMMIT_PLANNING_DOCS=true (default):

git add .planning/
git commit -m "chore: remove phase {target} ({original-phase-name})"

The commit message preserves the historical record of what was removed.

Phase {target} ({original-name}) removed.

Changes:
- Deleted: ${PHASE_DIR}
- Renumbered: Phases {first-renumbered}-{last-old} → {first-renumbered-1}-{last-new}
- Updated: ROADMAP.md, STATE.md
- Committed: chore: remove phase {target} ({original-name})

Current roadmap: {total-remaining} phases
Current position: Phase {current} of {new-total}

---

## What's Next

Would you like to:
- `/kata-track-progress` — see updated roadmap status
- Continue with current phase
- Review roadmap

---

• Don't remove completed phases (have SUMMARY.md files)
• Don't remove current or past phases
• Don't leave gaps in numbering - always renumber
• Don't add "removed phase" notes to STATE.md - git commit is the record
• Don't ask about each decimal phase - just renumber them
• Don't modify completed phase directories

Removing a decimal phase (e.g., 17.1):

• Only affects other decimals in same series (17.2 → 17.1, 17.3 → 17.2)
• Integer phases unchanged
• Simpler operation

No subsequent phases to renumber:

• Removing the last phase (e.g., Phase 20 when that's the end)
• Just delete and update ROADMAP.md, no renumbering needed

Phase directory doesn't exist:

• Phase may be in ROADMAP.md but directory not created yet
• Skip directory deletion, proceed with ROADMAP.md updates

Decimal phases under removed integer:

• Removing Phase 17 when 17.1, 17.2 exist
• 17.1 → 16.1, 17.2 → 16.2
• They maintain their position in execution order (after current last integer)

• Target phase validated as future/unstarted
• Phase directory deleted (if existed)
• All subsequent phase directories renumbered
• Files inside directories renamed ({old}-01-PLAN.md → {new}-01-PLAN.md)
• ROADMAP.md updated (section removed, all references renumbered)
• STATE.md updated (phase count, progress percentage)
• Dependency references updated in subsequent phases
• Changes committed with descriptive message
• No gaps in phase numbering
• User informed of changes