Edge

Goldsky Edge (RPC Endpoints)

Goldsky Edge is a managed, high-performance RPC endpoint service for EVM blockchains, built on eRPC — an open-source fault-tolerant EVM RPC proxy. It provides globally-distributed, low-latency RPC access with intelligent routing, caching, failover, and built-in observability.

What Edge Does

Edge sits between your application and blockchain RPC providers. It adds:

• Performance: Global edge infrastructure across 8+ regions, sub-100ms latency, tip-of-chain CDN caching
• Resiliency: Automatic failover across multiple providers for 99.9% uptime, hedged parallel requests
• Data Integrity: Cross-validates responses from multiple nodes, tracks block heights, enforces consensus checks
• Cost Control: Request deduplication, intelligent routing, configurable rate limiting
• Indexing Optimizations: Auto-splits large eth_getLogs requests, routes historical queries to archive nodes

Quickstart

Endpoint Format

https://edge.goldsky.com/standard/evm/{chainId}?secret=YOUR_SECRET

Replace {chainId} with the chain ID (e.g., 1 for Ethereum, 8453 for Base, 42161 for Arbitrum).

Authentication

Three options:

• Header (recommended): X-ERPC-Secret-Token: YOUR_SECRET — keeps the secret out of URLs, which are commonly logged by proxies, CDNs, and server access logs.
• Query parameter: ?secret=YOUR_SECRET — convenient for quick tests, but the secret leaks into any log that records the full URL. Prefer the header for production traffic. The examples below use the query param for brevity.
• x402 (pay-per-request): Clients without a secret receive an HTTP 402 response with payment requirements. An x402-compatible client signs a USDC payment and retries; Edge settles via a facilitator before forwarding the request upstream. Payment is settled on Base (chain 8453) in USDC. Pricing is $0.000005 per request (same as the standard $5 per million rate). See https://www.x402.org/ for the protocol spec.

Example (curl)

curl -s "https://edge.goldsky.com/standard/evm/1?secret=YOUR_SECRET" \
  -X POST \
  -H "Content-Type: application/json" \
  -d '{"jsonrpc":"2.0","method":"eth_blockNumber","params":[],"id":1}'

Example (viem)

import { createPublicClient, http } from "viem";
import { mainnet } from "viem/chains";

const client = createPublicClient({
  chain: mainnet,
  transport: http("https://edge.goldsky.com/standard/evm/1?secret=YOUR_SECRET"),
});

Example (ethers.js)

import { JsonRpcProvider } from "ethers";

const provider = new JsonRpcProvider(
  "https://edge.goldsky.com/standard/evm/1?secret=YOUR_SECRET"
);

Managing Edge Endpoints in the Webapp

Edge endpoints are created and managed in the Goldsky webapp at /dashboard/rpc-edge.

Creating an Endpoint

1. Navigate to the Edge RPC page (/dashboard/rpc-edge)
2. Click "Create endpoint"
3. Enter a name (lowercase letters, numbers, hyphens; must start with a letter; 3-50 chars)
4. Optionally select a rate limit budget
5. An API key is generated automatically (format: gs_edge_...)

Endpoint Management

• View metrics: See request counts, error rates, and response times on the endpoint detail page
• View logs: Searchable, filterable logs for debugging
• Reveal API key: View your secret key (click to copy)
• Rate limiting: Update the rate limit budget for an endpoint
• Pause/Resume: Toggle an endpoint on or off
• Delete: Remove an endpoint permanently

Plan Limits

• Free (Starter): 1 endpoint, subject to free-tier request limits
• Scale: Multiple endpoints, pay-as-you-go
• Enterprise: Unlimited endpoints

Rate Limiting

Rate limits are configured per secret in the Goldsky Dashboard. Pick one of the following named tiers (source: https://docs.goldsky.com/edge-rpc/platform/security#rate-limiting):

• Total RPS = max requests/sec across all IPs using this secret
• Per-IP RPS = max requests/sec from a single client IP

Rate limit budgets internally define rules with:

• method — which RPC method(s) the limit applies to (supports wildcards)
• maxCount — maximum number of requests
• period — time window (e.g. per second, per minute)

Supported Networks

Live registry (authoritative — always check this before recommending a chain): GET https://edge.goldsky.com/

Returns JSON with a standard array of every network Edge serves. Each entry has:

• id — e.g. evm:1 (prefix + chain ID)
• alias — human name (e.g. mainnet, base, polygon)
• blockTimeMs — average block time
• state — OK when operational

# List all supported chain IDs
curl -s https://edge.goldsky.com/ | jq '.standard[].id'

# Find a specific chain
curl -s https://edge.goldsky.com/ | jq '.standard[] | select(.id=="evm:8453")'

Highlights include Ethereum, Arbitrum One, Base, Optimism, Polygon zkEVM, BSC, Avalanche, Berachain, HyperEVM, Monad, Sei, Sonic, Unichain, zkSync, plus their testnets — but the registry above is the source of truth and includes many more.

For the human-readable docs page: https://docs.goldsky.com/chains/supported-networks

Special Capabilities

Flashblocks

Faster block confirmations on OP Stack chains (Base, Optimism, Unichain and their testnets). Enable by adding:

• Query parameter: use-upstream=flashblocks*
• Or header: X-ERPC-Use-Upstream: flashblocks*

HyperEVM System Transactions

Two distinct node pools for HyperEVM:

• use-upstream=systx* — Archive nodes with system transactions (for indexing)
• use-upstream=standard* — Realtime nodes without system transactions (for frontend dApps)

Pricing

• $5 per million requests — all RPC methods priced equally (no surcharges for eth_getLogs or trace methods)
• Up to 500M requests/month at $5/million
• 500M+: Volume discounts available (contact sales)

Monitoring

Each endpoint has a built-in Grafana dashboard showing:

• Total RPC requests and requests per second
• Network and method usage breakdowns
• Response time percentiles (P50/P90/P99)
• Error rates and detailed error logs
• Rate-limited request tracking
• Multiplexed and hedged request metrics

Error Codes

Edge normalizes errors from upstream providers:

Plus standard JSON-RPC errors (-32700, -32600, -32601, -32602, -32603) and EVM-specific errors (-32000, -32003, 3).

Supported RPC Methods

Full coverage of standard EVM JSON-RPC methods across five namespaces (60+ methods). Each method has its own docs page at https://docs.goldsky.com/edge-rpc/evm/methods/{method_name} — use it to confirm params, return shape, and any Edge-specific behavior before constructing a call.

Method index: https://docs.goldsky.com/edge-rpc/evm/methods

eth_* — core chain queries and transactions

eth_accounts, eth_blobBaseFee, eth_blockNumber, eth_call, eth_chainId, eth_createAccessList, eth_estimateGas, eth_feeHistory, eth_gasPrice, eth_getBalance, eth_getBlockByHash, eth_getBlockByNumber, eth_getBlockReceipts, eth_getBlockTransactionCountByHash, eth_getBlockTransactionCountByNumber, eth_getCode, eth_getFilterChanges, eth_getFilterLogs, eth_getLogs, eth_getProof, eth_getStorageAt, eth_getTransactionByBlockHashAndIndex, eth_getTransactionByBlockNumberAndIndex, eth_getTransactionByHash, eth_getTransactionCount, eth_getTransactionReceipt, eth_getUncleByBlockHashAndIndex, eth_getUncleByBlockNumberAndIndex, eth_getUncleCountByBlockHash, eth_getUncleCountByBlockNumber, eth_maxPriorityFeePerGas, eth_newBlockFilter, eth_newFilter, eth_newPendingTransactionFilter, eth_pendingTransactions, eth_sendRawTransaction, eth_subscribe, eth_syncing, eth_uninstallFilter, eth_unsubscribe

debug_* — raw block/receipt data and EVM tracing

debug_getRawBlock, debug_getRawHeader, debug_getRawReceipts, debug_getRawTransaction, debug_traceBlockByHash, debug_traceBlockByNumber, debug_traceCall, debug_traceTransaction

trace_* — OpenEthereum-style tracing

trace_block, trace_call, trace_callMany, trace_filter, trace_get, trace_rawTransaction, trace_replayBlockTransactions, trace_replayTransaction, trace_transaction

net_* — network metadata

net_listening, net_peerCount, net_version

web3_* — client metadata

web3_clientVersion, web3_sha3

Request shape

All methods use the standard JSON-RPC 2.0 envelope. Example for eth_getLogs:

curl -s "https://edge.goldsky.com/standard/evm/1?secret=YOUR_SECRET" \
  -X POST \
  -H "Content-Type: application/json" \
  -d '{
    "jsonrpc": "2.0",
    "id": 1,
    "method": "eth_getLogs",
    "params": [{
      "fromBlock": "0x1000000",
      "toBlock": "0x1000064",
      "address": "0xdAC17F958D2ee523a2206206994597C13D831ec7"
    }]
  }'

Before using trace methods (debug_trace*, trace_*), check the per-method page — not every chain supports every tracer, and some methods have chain-specific quirks documented there.

eRPC (Open-Source)

Edge is built on eRPC, an open-source fault-tolerant EVM RPC proxy. For capabilities beyond what Goldsky Edge exposes (self-hosting, custom cache drivers, custom selection policies, multi-provider failover, etc.), users may want to run eRPC directly.

For full eRPC reference (features, config, APIs), fetch the LLM-optimized docs bundle: https://docs.erpc.cloud/llms.txt

Goldsky Documentation Links

• Edge Introduction: https://docs.goldsky.com/edge-rpc/introduction
• Edge Quickstart: https://docs.goldsky.com/edge-rpc/quickstart
• Why Edge: https://docs.goldsky.com/edge-rpc/why-edge
• Security & Rate Limiting: https://docs.goldsky.com/edge-rpc/platform/security
• Monitoring: https://docs.goldsky.com/edge-rpc/platform/monitoring
• Flashblocks: https://docs.goldsky.com/edge-rpc/capabilities/flashblocks
• HyperEVM System Tx: https://docs.goldsky.com/edge-rpc/capabilities/hyperevm-system-transactions
• Error Codes: https://docs.goldsky.com/edge-rpc/evm/error-codes
• RPC Methods Index: https://docs.goldsky.com/edge-rpc/evm/methods
• Pricing: https://docs.goldsky.com/pricing/summary
• Supported Networks: https://docs.goldsky.com/chains/supported-networks