Release Archivist

Release Archivist

Finish a spec-superflow change cleanly with verification evidence. This skill operates while the change state is executing; it is not an active skill after the final transition to closing.

Execution-State Guard

Before verification, ssf audit, any DP state write, or delta-spec merge, run ssf state get <change-dir> state. Continue only when the persisted state is exactly executing. If it is closing → STOP: "Closing is terminal; release, audit, and archival work were completed before this transition." For any other state, or if the state cannot be read → STOP and route through workflow-start; do not perform side effects.

Direct Short-Path Closure (run before the Full checklist)

For Quick, Tweak, or a valid direct incident Hotfix receipt, skip the Full verification, audit, delta merge, DP-6, and DP-7 sections below. Record changed files, the focused verification command and result, then persist test_result: pass and transition to closing. Quick requires a targeted test or syntax/static check; direct Hotfix requires an original-symptom regression. A legacy Hotfix stays on the Full checklist.

Full/Legacy Verification Before Completion

The Full checklist below applies only to Full and legacy Hotfix. Direct Short-Path Closure above takes precedence for Quick, Tweak, and valid direct Hotfix.

Claiming work is complete without verification is dishonesty, not efficiency. Before claiming any status:

1. IDENTIFY the command that proves the claim
2. RUN the full command fresh
3. READ output, check exit code
4. VERIFY output confirms the claim
5. Only THEN make the claim

Forbidden before evidence: "should", "probably", "seems to", expressions of satisfaction without output.

Full/Legacy Verification Steps

Step 1: Test Suite

Run full test suite. Record total/passed/failed/skipped. Zero failures = PASS.

Step 2: Completeness

Compare contract batches against actual diff. Every SHALL/MUST must have implementation evidence. Missing = Critical severity.

Step 3: Coherence

Compare design decisions against code. Check naming consistency. Inconsistencies = IMPORTANT.

Step 4: Unintended Scope

Check for files modified outside scope fence, new dependencies not in design. Unplanned = WARN.

Step 5: Report

Verdict: PASS (all PASS) / CONDITIONAL (WARN only) / FAIL (any FAIL).

• FAIL → fix issues or route back to build-executor
• CONDITIONAL → present WARNs, proceed only with user acceptance
• PASS → proceed to final checks

Full/Legacy Final Checks

• Tests passing? (cite command and output)
• All batches complete? (cite batch status)
• Scope added without artifact updates?
• Unresolved blockers or known risks?
• Delta specs exist that need merging?
• Run ssf audit <change-dir> — include decision-point-audit.md in archive

DP-6 (Verification Outcome, Full/legacy Hotfix)

ssf state set <change-dir> dp_6_result "<pass|conditional|fail>: <summary>"
ssf state set <change-dir> dp_6_timestamp $(date -u +%Y-%m-%dT%H:%M:%SZ)

If FAIL, do NOT proceed to DP-7. Route back or ask about abandonment.

After recording a PASS outcome, also record it as the verification gate so the executing → closing transition is allowed (the guard accepts either test_result: pass or a dp_6_result starting with pass):

ssf state set <change-dir> test_result pass

DP-7 (Archive Confirmation, Full/legacy Hotfix)

ssf state set <change-dir> dp_7_result "confirmed: <archive summary>"
ssf state set <change-dir> dp_7_timestamp $(date -u +%Y-%m-%dT%H:%M:%SZ)

Verify DP-0 through DP-6 are recorded before DP-7.

Archive Rule (Full/legacy Hotfix)

If implementation diverged from the contract, return to bridging before closure.

Finalize While Executing (Full/legacy Hotfix)

Complete every release, delta-spec synchronization, and audit action while the state remains executing. If delta specs exist, invoke spec-merger and resolve its outcome before the final executing → closing transition. Then run ssf state transition <change-dir> closing. executing → closing is the final action: once it succeeds, select no next skill and run no recovery scans.

Physical Archive (Full/legacy Hotfix only)

After the executing → closing transition succeeds, complete the physical archive with:

ssf finish <change-dir> [--test-cmd <command>]

ssf finish merges the isolation branch back to the trunk (--no-ff), verifies the trunk (default npm test, --test-cmd override, 10-minute timeout), then removes the worktree and the isolation branch. For submodule projects it auto-falls-back to --force worktree removal; if that also fails it prints the merge commit and manual cleanup commands. Quick / direct Hotfix / tweak / lightweight skip this step — their closing is already the physical terminal.

Lightweight Closure (Quick/direct Hotfix/tweak)

Quick and direct Hotfix use a concise verification summary: changed files, focused command, result, and persisted test_result: pass. Quick runs targeted tests or syntax/static checks; direct Hotfix proves the original symptom regression. Do not require a contract, execution plan, review receipt, DP-6, or DP-7. A legacy Hotfix remains on the full contract/DP/review closure path. Tweak verifies file integrity and also persists test_result: pass. Closing is the physical terminal for lightweight paths — no ssf finish step is needed.

Exception Handling

• Parse failures: Report exact file and section
• Missing files: If audit can't generate, run ssf audit manually
• User interruption: Re-run verification from the beginning on resume
• DP gaps: Flag missing DPs during DP-6; ask user whether to proceed or return

Standard User-Facing Handoff

End every user-facing phase report with this concise handoff. Only a successfully persisted closing state and abandoned are terminal.

Normal report

• Current stage: <detected workflow stage>.
• Completed / blocker: <completed work>.
• Next stage: <next workflow stage or skill>.
• Entry condition: <what must be true to enter it>.

Blocked report

• Current stage: <detected workflow stage>.
• Completed / blocker: <blocking fact or missing evidence>.
• Next stage: <stage that resumes after the blocker>.
• Entry condition: <the approval, artifact, validation, or fix required>.

Approval-wait report

• Current stage: <detected workflow stage>.
• Completed / blocker: <work ready for the named decision>.
• Next stage: <stage that follows approval>.
• Entry condition: <explicit user approval or recorded decision>.

Closing-in-progress report

• Current stage: executing; release verification or archive work is still running.
• Completed / blocker: <completed release work or remaining release blocker>.
• Next stage: complete the remaining release or archive step, then transition to closing (not none).
• Entry condition: all release and archive work is complete and the transition succeeds.

Successful terminal report

• Current stage: successfully persisted closing or abandoned.
• Completed / blocker: <persisted terminal outcome>.
• Next stage: for Full/legacy Hotfix, the physical archive via ssf finish <change-dir> (worktree merge + cleanup); once it succeeds, next = none. For Quick / direct Hotfix / tweak / lightweight, none — closing is the physical terminal.
• Entry condition: no further state transition exists.