Gwt Tester

GWT Tester

Use these instructions to write clean, readable tests with Given/When/Then semantics.

Terminology Map

Use the agnostic terms below throughout this skill.

When this skill says:

• "suite block", read describe (JS/TS) or group (Dart)
• "case block", read it/test (JS/TS) or test (Dart)
• "setup hook", read before/beforeEach (JS/TS) or setUpAll/setUp (Dart)
• "teardown hook", read after/afterEach (JS/TS) or tearDownAll/tearDown (Dart)

Rules

1. Keep maximum nesting depth to 3 levels: suite -> suite -> case. Exception: allow suite -> suite -> suite -> case for When variant coverage when validating the same behavior across interfaces or variants (for example via RPC and via REST). In this exception, variants are at level 3 and Then case blocks are at level 4.
2. Never nest Given blocks inside another Given block.
3. Keep Given setup hooks focused on shared context and test data, not primary behavior under test.
4. Prefer assertion-only case blocks.
5. Move executable behavior into a dedicated When block whenever possible. Use setup hooks inside that When block to run the action once per case. If there is no executable action to perform for a scenario, skip the When block and place Then cases directly under the Given block. If that When contains variants, place action setup hooks inside each variant block, not in the parent When block.
6. Ensure block titles describe behavior that actually happens in that block's scope. Do not title a case When <action> ... if <action> already ran in another block's setup hook.
7. If a When has only one Then, use a single case title (When ... then ...); in this collapsed form, putting the When action inside the case body is acceptable.
8. Remove wrapper suite blocks that do not add scenario context.
9. Write explicit scenario titles: Given <subject> with <condition>, optional When <action>, and Then <outcome>.
10. Place test utilities based on scope:
    • If a utility is specific to one test file, place it at the bottom of that file so test blocks remain the first code in the file.
    • If a utility is reused across test files, move it to shared test utilities following existing codebase conventions.
    • If no shared utility convention exists, create an appropriate utils directory and place shared utilities there.
11. Extract a value into a named variable only when that value is used more than once, and place it in the nearest shared scope (for example Given or When) to make test data updates predictable and centralized.

Writing Workflow

1. Define scenarios as top-level Given ... suite blocks.
2. Add Given setup hooks for shared context only.
3. Add nested When ... suite blocks for each action path. If there is no action to perform, skip When and place Then cases directly under Given.
4. Run the action in setup hooks inside the When block when multiple Then cases share it. If variants exist under that When, run setup hooks inside each variant block.
5. Add assertion-only Then ... case blocks.
6. If a When has only one Then, optionally collapse to a single case title: When ... then ....
7. Move logic from Given hooks into When hooks when that logic is action-specific.
8. If a When needs interface/variant coverage, nest variant blocks under that When only (for example via RPC, via REST).
9. Keep nesting shallow and remove redundant wrappers.
10. Run tests and formatter.

When Variant Coverage

Use one extra nesting level only for variant coverage under the same When action. Keep action setup hooks inside each variant block, not in the parent When block.

Example 1 (setup inside variants):

suite("Given an endpoint that returns a user", () => {
  suite("When requesting user 42", () => {
    suite("via RPC", () => {
      setup_each(() => {
        response = requestUserViaRpc(42)
      })

      case("Then status is successful", () => {
        assert(response.status == 200)
      })
    })

    suite("via REST", () => {
      setup_each(() => {
        response = requestUserViaRest(42)
      })

      case("Then status is successful", () => {
        assert(response.status == 200)
      })
    })
  })
})

Example 2 (multiple Then outcomes per variant):

suite("Given a user endpoint", () => {
  suite("When requesting user 42", () => {
    suite("via RPC", () => {
      setup_each(() => {
        response = requestUserViaRpc(42)
      })

      case("Then status is successful", () => {
        assert(response.status == 200)
      })

      case("Then user payload is present", () => {
        assert(response.body.user != null)
      })
    })

    suite("via REST", () => {
      setup_each(() => {
        response = requestUserViaRest(42)
      })

      case("Then status is successful", () => {
        assert(response.status == 200)
      })

      case("Then user payload is present", () => {
        assert(response.body.user != null)
      })
    })
  })
})

Pseudocode Pattern

suite("Given <subject> with <state>", () => {
  setup_each(() => {
    // arrange shared context
  })

  suite("When <action>", () => {
    setup_each(() => {
      // act
    })

    case("Then <outcome A>", () => {
      // assert only
    })

    case("Then <outcome B>", () => {
      // assert only
    })
  })
})

No-action scenario (skip When):

suite("Given <subject> with <state>", () => {
  setup_each(() => {
    // arrange shared context only
  })

  case("Then <outcome A>", () => {
    // assert only
  })
})

Title-to-Scope Alignment

Use titles that match where behavior occurs.

Bad example:

suite("Given a counter at zero", () => {
  setup_each(() => {
    // Bad: action belongs in a When block, not Given setup.
    counter.increment()
  })

  case("Then value is one", () => {
    assert(counter.value == 1)
  })
})

Good example:

suite("Given a counter at zero", () => {
  setup_each(() => {
    // arrange
  })

  suite("When incremented", () => {
    setup_each(() => {
      counter.increment()
    })

    case("Then value is one", () => {
      assert(counter.value == 1)
    })

    case("Then value is not zero", () => {
      assert(counter.value != 0)
    })
  })
})

Logic Movement for Clean Blocks

Move logic to the narrowest block that owns that behavior.

• Keep data creation and shared fixtures in Given setup hooks.
• Move action-specific calls from Given setup hooks into the relevant When block.
• Keep Then case blocks assertion-only.
• Only keep action execution in case bodies for a single When ... then ... collapsed case.

When/Then Collapse

Apply collapse when one action has only one outcome assertion.

Bad example (not collapsed):

suite("Given a counter at zero", () => {
  setup_each(() => {
    // arrange
  })

  suite("When incremented", () => {
    setup_each(() => {
      counter.increment()
    })

    case("Then value is one", () => {
      assert(counter.value == 1)
    })
  })
})

Good example (collapsed):

suite("Given a counter at zero", () => {
  setup_each(() => {
    // arrange
  })

  case("When incremented then value is one", () => {
    counter.increment()

    assert(counter.value == 1)
  })
})

Utility Placement

Choose utility location by reuse scope.

• Keep file-specific utilities in the same test file, below all test blocks.
• Move cross-file utilities to shared test utility locations used by the codebase.
• If the repository has no established shared test utility location, create an appropriate utils directory for shared test helpers.

Reused Values

Extract repeated values into named variables near test setup only when the same value is used more than once.

Bad example (no variable extracted):

suite("Given a user lookup", () => {
  suite("When searching by user id", () => {
    case("Then it returns the matching user", () => {
      result = findUser("user-42")
      assert(result.id == "user-42")
    })

    case("Then it records an audit message for that user", () => {
      assert(formatAuditMessage("user-42") == "audit:user-42")
    })
  })
})

Bad example (scope too broad):

suite("Given a user lookup", () => {
  userId = "user-42" // Too broad: only shared inside the When block below.

  suite("When searching by user id", () => {
    case("Then it returns the matching user", () => {
      result = findUser(userId)
      assert(result.id == userId)
    })

    case("Then it records an audit message for that user", () => {
      assert(formatAuditMessage(userId) == "audit:" + userId)
    })
  })
})

Good example:

suite("Given a user lookup", () => {
  suite("When searching by user id", () => {
    userId = "user-42" // Nearest shared scope.

    case("Then it returns the matching user", () => {
      result = findUser(userId)
      assert(result.id == userId)
    })

    case("Then it records an audit message for that user", () => {
      assert(formatAuditMessage(userId) == "audit:" + userId)
    })
  })
})

Refactoring Guide

When asked to refactor or check existing tests, evaluate against all rules, not only the rule that triggered the edit.

Use this pass order:

1. Map current structure as Given, When, and Then blocks.
2. Move action-specific logic out of Given setup hooks into the correct When block. Keep scenarios with no action directly under Given without adding an empty When.
3. After each logic move, immediately re-evaluate collapse opportunities:
   • If a When block now has only one Then, collapse to When ... then ....
   • If additional outcomes still exist, keep When + multiple Then cases.
4. Re-check title-to-scope alignment after structural edits.
5. Run the full review checklist before finishing.

Anti-Patterns

• Nesting Given inside Given.
• Keeping action execution in Given setup when it can be moved to a When block.
• Calling the SUT inside a case block when it can be executed in When setup hooks.
• Mixing setup/action/asserts in a single case block.
• Adding wrapper suite blocks with no new context.
• Adding an empty When block when there is no action to perform.
• Collapsing to When ... then ... when When variants exist, even if there is only one Then outcome.
• Depth greater than suite -> suite -> case, except suite -> suite -> suite -> case for When variants.
• A title that claims an action runs in one block when it actually runs in another block.

Review Checklist

• Are all rules reviewed, not just the rule that prompted the refactor?
• Are there any nested Given blocks?
• Does each case block contain assertions only?
• Does Given setup contain only shared context?
• Is action logic moved into the relevant When block?
• If there is no action to perform, is When skipped and are Then cases placed directly under Given?
• When variants exist, are action setup hooks placed inside each variant block instead of the parent When block?
• After each logic move, was When/Then collapse re-evaluated?
• Do suite and case titles match what actually happens in each block's scope?
• Are single When + single Then cases collapsed into one case block?
• Are file-specific utilities placed at the bottom of the test file (with tests first)?
• Are shared utilities moved to shared locations that follow existing codebase patterns (or a new appropriate utils directory when no pattern exists)?
• Are values extracted into named variables only when reused more than once, and placed in the nearest shared scope (for example Given or When)?
• Is nesting depth <= 3, or suite -> suite -> suite -> case only for When variants (level 3) with Then case blocks at level 4 (for example via RPC/via REST)?