Docs Ssot

docs-ssot: Documentation SSOT Setup

This skill migrates existing Markdown documentation into a modular Single Source of Truth (SSOT) structure managed by docs-ssot, then builds and validates the output.

When to use this skill

• Setting up docs-ssot in a new or existing repository (follow the main Workflow)
• Adding a new generated output file (e.g., SETUP.md) to an existing SSOT structure (follow Adding a new output file)
• Regenerating documentation after editing source templates (run docs-ssot build)

Quick Command Reference

Workflow

Step 1 — Check prerequisites

Verify required tools are installed:

docs-ssot version   # docs-ssot itself
jq --version        # required by the generated-file protection hook
yq --version        # required by the generated-file protection hook and lefthook check

Install docs-ssot if missing:

# Homebrew (macOS/Linux)
brew tap hiromaily/tap && brew install docs-ssot

# or Go install
go install github.com/hiromaily/docs-ssot/cmd/docs-ssot@latest

Step 2 — Check if already migrated

Before running migration, check whether this repository already has a docs-ssot structure:

ls docsgen.yaml 2>/dev/null
ls template/sections/ 2>/dev/null

If both exist, the repository is already (partially or fully) migrated. Do not run docs-ssot migrate on generated output files. Instead, skip to Step 5 to review the structure, or Step 8 to validate the current state.

If docsgen.yaml does not exist, or template/sections/ is empty or missing, proceed with Steps 3–6.

Step 3 — Identify existing documentation files

List Markdown files in the repository root:

ls *.md

Common candidates: README.md, CLAUDE.md, AGENTS.md, SETUP.md, ARCHITECTURE.md

Do not migrate files that are already outputs in docsgen.yaml — migrating a build artifact instead of a source file will produce incorrect results.

Step 4 — Preview and run the migration

First, preview without writing files:

docs-ssot migrate --dry-run README.md CLAUDE.md

Review the output to understand how sections will be categorised and which are detected as duplicates. Then run the actual migration:

docs-ssot migrate README.md CLAUDE.md AGENTS.md

This will:

1. Split each file by H2 headings into section files under template/sections/<category>/
2. Create template files under template/pages/ with @include directives
3. Create or update docsgen.yaml with build targets
4. Verify round-trip: build and compare output against originals

docsgen.yaml reference (the file created/updated by migration):

index:
  output: template/INDEX.md   # optional: generates include-relationship index

targets:
  - input: template/pages/README.tpl.md
    output: README.md
  - input: template/pages/CLAUDE.tpl.md
    output: CLAUDE.md

Add or remove targets to control which files are generated.

Step 5 — Review generated structure

docs-ssot index

Inspect:

• template/sections/ — modular section files (edit these, not the generated outputs)
• template/pages/*.tpl.md — template files defining document structure
• docsgen.yaml — build targets mapping templates to output files

Step 6 — Audit for duplicate content

Run this before creating any new section file. The docs-ssot migrate command deduplicates across the files it processes, but any additional content you create manually must be checked:

docs-ssot check

Also inspect existing sections:

ls template/sections/

Rule: If content for a new section already exists in a section used by another template (e.g., installation-guide.md already covers prerequisites and setup), do not create a duplicate. Instead, have the new template include the existing section:

<!-- template/pages/SETUP.tpl.md -->
<!-- @include: ../sections/development/installation-guide.md -->
<!-- @include: ../sections/development/setup-release.md -->

Only create a new section file when the content is genuinely new and not covered anywhere else.

Step 7 — Heading level convention

All section files under template/sections/ must start at heading level 2 (##).

## My Section Title       ← ✅ correct

# My Section Title        ← ❌ wrong

Why: Section files are embedded into larger documents where # is reserved for the document title. Starting at ## means most includes need no level parameter.

Exception — when a section file is used as a standalone output (e.g., .claude/rules/*.md), use level=-1 in the template to shift ## → #:

<!-- @include: ../sections/ai/rules/docs.md level=-1 -->

Step 8 — Validate and build

First validate (dry-run — checks includes without writing files):

docs-ssot validate

If validation passes, build:

docs-ssot build
# or, if a Makefile target exists:
make docs

Verify output is correct:

git diff README.md CLAUDE.md

Never edit generated outputs (README.md, CLAUDE.md, or any docsgen.yaml output) directly — they are overwritten on every build.

Include directive syntax

Templates use include directives to compose sections:

<!-- @include: ../sections/project/overview.md -->
<!-- @include: ../sections/development/ -->
<!-- @include: ../sections/**/*.md level=+1 -->

Paths are resolved relative to the file containing the directive. Includes are expanded recursively.

Adding a new output file

To add a new generated file (e.g., SETUP.md) to an existing SSOT structure:

1. Audit existing sections (see Step 6) — do not duplicate content that already exists.
2. Create the template page at template/pages/SETUP.tpl.md, including existing sections where applicable.
3. Register in docsgen.yaml:

   - input: template/pages/SETUP.tpl.md
     output: SETUP.md
   

4. Validate and build (see Step 8):

   docs-ssot validate && docs-ssot build
   git diff SETUP.md
   

Optional enhancements

VitePress integration

If the repository has a VitePress site, detect it by checking for docs/.vitepress/:

ls docs/.vitepress/ 2>/dev/null

If present, convert each docs/ page from standalone content into a thin @include wrapper so template/sections/ becomes the single source of truth for both the generated root-level files and the VitePress site.

Before (docs/guide/installation.md with standalone content):

# Installation
## Prerequisites
...full content here...

After (docs/guide/installation.md as a thin wrapper):

<!-- @include: ../../template/sections/development/installation-guide.md -->

The canonical content lives in template/sections/ and is referenced by any template that needs it.

Generated-file protection hook (Claude Code)

Prevent AI agents from directly editing generated files. The hook reads docsgen.yaml at runtime so the block list stays in sync automatically.

Create .claude/hooks/prevent-generated-edit.sh:

#!/bin/sh
# Blocks Edit and Write tool use on auto-generated files.
# Generated files are defined as outputs in docsgen.yaml.
# Edit the source files in template/ instead, then run `make docs`.

# Requires: jq, yq
command -v jq >/dev/null 2>&1 || { echo "jq required but not found — hook inactive" >&2; exit 0; }
command -v yq >/dev/null 2>&1 || { echo "yq required but not found — hook inactive" >&2; exit 0; }

FILE=$(echo "$TOOL_INPUT" | jq -r '.file_path // empty')
if [ -z "$FILE" ]; then
  exit 0
fi

REPO_ROOT=$(git rev-parse --show-toplevel 2>/dev/null)
REL_PATH="${FILE#"${REPO_ROOT}/"}"

CONFIG="docsgen.yaml"
if [ ! -f "$CONFIG" ]; then
  exit 0
fi

GENERATED=$(yq -r '.targets[].output' "$CONFIG" 2>/dev/null)
if [ -z "$GENERATED" ]; then
  exit 0
fi

if echo "$GENERATED" | grep -Fqx "$REL_PATH"; then
  echo "BLOCKED: '$REL_PATH' is auto-generated by docs-ssot. Edit the source in template/ instead, then run 'make docs'." >&2
  exit 2
fi

exit 0

Make it executable:

chmod +x .claude/hooks/prevent-generated-edit.sh

Register in .claude/settings.json. If the file already exists, merge into the existing hooks.PreToolUse array rather than overwriting:

{
  "hooks": {
    "PreToolUse": [
      {
        "matcher": "Edit",
        "hooks": [
          { "type": "command", "command": ".claude/hooks/prevent-generated-edit.sh" }
        ]
      },
      {
        "matcher": "Write",
        "hooks": [
          { "type": "command", "command": ".claude/hooks/prevent-generated-edit.sh" }
        ]
      }
    ]
  }
}

Pre-push docs-check (lefthook)

Add to lefthook.yml to fail a push when generated files are stale. Derive the file list from docsgen.yaml so it stays in sync automatically:

pre-push:
  commands:
    docs-check:
      glob: "{template/**/*,docsgen.yaml}"
      run: |
        docs-ssot build
        docs-ssot index
        if ! yq -r '(.targets[].output, .index.output) | select(. != null)' docsgen.yaml | xargs -I {} git diff --quiet {}; then
          echo "ERROR: Generated files are out of date. Run 'make docs' and commit the changes." >&2
          exit 1
        fi

Document the tooling in the README

Add a note so contributors know the documentation is managed by docs-ssot.

Find the section file for the README intro:

head -5 template/pages/README.tpl.md  # the first @include is the intro section

Open that section file and append:

> **Documentation** is managed as a Single Source of Truth using [docs-ssot](https://github.com/hiromaily/docs-ssot).
> Files such as `README.md`, `CLAUDE.md`, and `ARCHITECTURE.md` are auto-generated —
> edit the source files under `template/` and run `make docs` to regenerate.

Then rebuild:

docs-ssot build