Prompt Tuning

Empirical Prompt Tuning

The author of a prompt cannot judge its quality. The clearer the writer thinks something is, the more likely another agent will stumble on it. The core of this skill is to have a bias-free executor actually run the instruction, evaluate it two-sidedly, and iterate. Do not stop until improvements plateau.

When to use

• Right after creating or substantially revising a skill / slash command / task prompt
• When an agent does not behave as expected and you want to attribute the cause to ambiguity on the instruction side
• When hardening high-importance instructions (frequently used skills, automation-core prompts)

When not to use:

• One-off throwaway prompts (evaluation cost does not pay off)
• When the goal is not to improve success rate but merely to reflect the writer's subjective preferences

Workflow

0. Iteration 0 — description / body consistency check (static, no dispatch needed)

   • Read the triggers / use cases claimed by the frontmatter description. For targets without frontmatter (CLAUDE.md fragment, code-gen prompt, free-prose instruction), substitute the author-provided summary of intent: a section heading, the leading sentence / paragraph, or — failing both — the first imperative sentence in the body. Note in the iter-0 output which surrogate was used (e.g. iter-0: PASS (description surrogate: section heading "## Commit messages")).
   • Read the scope the body actually covers
   • If there is a gap, reconcile description or body before moving to iter 1
   • Example: description says "navigation / form filling / data extraction" but the body is only a CLI reference for npx playwright test — detect that kind of gap
   • Scope: iter 0 covers description-vs-body coverage gaps only. Body-internal defect classes (unresolved placeholders like <skill-dir>, dead cross-references, undefined slot-fillings, ambiguous bullets) are out of scope for iter 0 — note them as iter-N fix candidates and surface them only if the iter 1+ executor actually trips on them. Do not let them block entry to iter 1.
   • Output shape (one machine-readable line emitted before iter 1 begins; for skipped iters see ## Presentation format § Skipped-iteration form — the verdict is emitted in exactly one location, immediately above the iter-N table, and that emission satisfies this pre-iter-1 requirement):
     • iter-0: PASS — no gap; proceed to iter 1.
     • iter-0: PASS-with-note (<one-line gap summary>) — description undersells body, or wording mismatch that does not block a workable contract; record the note, proceed to iter 1.
     • iter-0: BLOCK-consistency (<one-line gap summary>) — description claims a capability the body does not cover; reconcile description or body before proceeding. Iter 1 must not run until the verdict is upgraded to PASS or PASS-with-note.
   • Isomorphism with the skip return contract's iter_0 field: the JSON value of iter_0 (in the skip return contract defined in ## Environment constraints) is the same string as this one-liner with the iter-0: prefix stripped — e.g., the one-liner iter-0: PASS-with-note (description undersells body) becomes JSON "iter_0": "PASS-with-note (description undersells body)". Use "not-run" only when iter 0 itself did not run. Do not re-summarize or shorten when serializing to JSON.
   • If you skip this, the subagent will "reinterpret" the body to match the description, and accuracy will come out high even though the skill does not actually meet the requirements (false positive)

1. Baseline preparation: Freeze the target prompt (= pin the version under test; do not edit it during this iter's evaluation — "freeze for this round", not "remediate". Remediation happens at Workflow step 5 below). Then prepare the following two things.

   • Evaluation scenarios, 2 to 3 kinds. Always include at least 1 median (realistic typical use of the target prompt) AND at least 1 edge (atypical / failure-prone case — environment constraint, malformed input, ambiguous request, partial workflow, etc.). Count is soft: prefer 3, accept 2 when executor token cost is tight (dispatch budget — the main bound; one subagent run ≈ tens of thousands of tokens); never fewer than 2. Note: in non-empirical modes such as baseline-only previews and ## Environment constraints Alt 3 / structural review where no dispatch occurs, executor cost is zero — count can stay at 3. Realistic tasks that assume actual situations where the target prompt would apply.
   • Designed vs executed scenarios: the count above fixes the designed set at baseline and is reused across iters. The executed set per iter defaults to the whole designed set (dispatch all in parallel per step 2). Under resource bounds, executed may shrink to a strict subset — but the median scenario must execute every iter, and iters with |executed| < |designed| are partial iters: results inform fixes but do not count toward consecutive-clear judgment in ## Iteration stopping criteria.
   • Requirements checklist (for computing accuracy). For each scenario, enumerate 3 to 7 items the deliverable must satisfy. Accuracy % = items satisfied / total items. Fix this in advance (do not move it afterward).
   • Mechanism vs outcome — checklist items judge the deliverable, not the runtime: each item, especially [critical] items, must describe a property of the deliverable (output quality, coverage of required viewpoints, expected format, scope adherence) — not the runtime mechanism the executor uses to produce it (e.g. "spawned a subagent via the Agent tool", "called a specific helper skill", "issued exactly N tool calls"). Mechanism-focused [critical] items conflate "the target prompt is well-designed" with "the executor's environment can run the prompt's preferred path", so an executor that produces the right deliverable via an environment-forced fallback (recursive Agent blocked, a tool absent, etc.) gets scored × on the target's quality. Phrase checks in terms of what the user would see in the deliverable; if a mechanism check is genuinely load-bearing for the target, put it in a non-[critical] item so it surfaces without dominating the success / failure judgment.
   • Target-size scaling (relaxation of the floors above for tiny targets): the "≥2 scenarios" and "≥3 items per checklist" floors are calibrated for skill-sized targets (~100+ lines, multiple distinct usage paths). Apply this scaling rule when both sub-conditions hold:
     • target body ≤ ~50 lines (excluding frontmatter), AND
     • target has ≤ ~3 distinct usage paths / branches (e.g., a 3-command CLI wrapper, a short CLAUDE.md fragment). When both hold, the floors relax to 2 scenarios (still 1 median + 1 edge — composition floor is invariant) and 2 items per checklist (still ≥1 [critical] — success-judgment floor is invariant). When only one sub-condition holds (e.g., short body but many branches), keep the standard floors. When neither sub-condition holds (target is large enough AND has rich path-space), keep the standard floors. If the target is even smaller than the relaxation point — body ≤ ~20 lines and ≤ 2 paths — prefer § When to use's "When not to use" sub-list's "One-off throwaway prompts" branch over applying the methodology at all. Record which regime was applied as a one-line note in the iter-1 baseline-preparation output (e.g., scaling: tiny-target (relaxed floors to 2 scenarios × 2 items) or scaling: standard floors).

2. Bias-free read: Have a "blank-slate" executor read the instruction. Dispatch a new subagent via the Agent tool. Do not substitute with a self-reread (it is structurally impossible to view text you just wrote objectively). When running multiple scenarios in parallel, place multiple Agent invocations within a single message.

   • Pre-flight callability check (do this once, the first time iter 1 is entered for this run): verify Agent callability by checking the cheapest detection signal first — do not spend a tool call if registry inspection already answers the question:
     1. Tool registry inspection (cheapest, no tool call): inspect the tool surface visible to you, distinguishing two sub-surfaces — the active surface (tools enumerated as top-level function definitions, directly invocable without a load step) and any deferred surface (lazy-loaded enumeration listing tool names that require a schema-fetch step like ToolSearch before invocation). Three sub-states resolve directly:
        • Absent from both surfaces: treat as not callable, skip steps 2–3.
        • Present only in the deferred surface (presence-without-load): treat as not callable for this run. Do not hydrate the tool via ToolSearch (or equivalent) merely to satisfy this probe.
        • Present in the active surface: proceed to step 2 (trial dispatch).
     2. Trial dispatch (only if step 1 says present): issue the first scenario's dispatch normally. If the call returns a permission-denied / recursion-blocked error rather than a normal subagent reply, treat as not callable.
     3. Silently-empty subagent (only if step 2 returned): if the dispatch returned but the subagent's body is empty or the <usage> block is missing entirely, treat as not callable and do not retry. If not callable by any of (1) / (2) / (3), immediately route to the ## Environment constraints section and emit the skip return contract defined there — do not retry with self-reread.

3. Execution: Hand the subagent a prompt that follows the subagent invocation contract described below, and have it execute the scenario. The executor produces an implementation or output and returns a self-report at the end.

4. Two-sided evaluation: Record the following from the returned results.

   • Executor self-report (extracted from the body of the subagent's report): unclear points / discretionary fill-ins / places where template application got stuck
   • Trace interpretation: each unclear point is tagged with the phase it originated in (Understanding / Planning / Execution / Formatting — see "Subagent invocation contract"). Phase-local fixes land better than global "the prompt was unclear" fixes; a single Understanding-phase ambiguity often looks like a chain of Execution-phase failures.
   • Structured reflection: each unclear point must be returned as Issue / Cause / General Fix Rule. The General Fix Rule is the class-level abstraction that feeds the "Failure pattern ledger" — without it, fixes stay as one-off patches that rediscover the same mistake later.
   • Instruction-side measurements (the judgment rules are defined canonically in this section; refer to it from elsewhere):
     • Success/failure: counts as success (○) only when all requirements tagged [critical] are ○. If even one is × or partial, it is failure (×). The label is the binary ○ / × only.
     • Accuracy (achievement rate of the requirements checklist, %. ○ = full score, × = 0, partial = 0.5; sum and divide by total items)
     • Step count (the tool_uses: value emitted in the <usage>...</usage> block at the tail of the Agent tool's return text. Include Read / Grep, do not exclude them)
     • Duration (the duration_ms: value in the same <usage> block)
     • Retry count (how many times the subagent redid the same decision. Extract from the subagent's self-report; not measurable from the instruction side)
     • On failure, add a one-line note to the "unclear points" section of the presentation format stating "which [critical] item dropped" (for root cause tracing)
   • The requirements checklist must include at least one [critical]-tagged item (if there are zero, the success judgment becomes vacuous). Do not add or remove [critical] tags after the fact.

5. Apply the diff: Put the minimum fix into the prompt to eliminate the unclear points. One theme per iteration (multiple related fixes are OK, unrelated fixes go to next time).

   • Before applying the fix, explicitly state "which item in the requirements checklist / judgment wording this fix satisfies" (fixes inferred from axis names often do not land. See the "Fix propagation patterns" section below.)
   • Consult the failure pattern ledger first. If the structured reflection's General Fix Rule already matches a known pattern, the first question is "why didn't the existing fix prevent it?" — the fix may need to move closer to the top of the prompt, or be re-worded, before a new ledger entry is added.

6. Re-evaluate: Run 2 → 5 again with a new subagent (do not reuse the same agent: it has learned the previous improvements). Increase parallelism if iterating further does not plateau improvements.

7. Convergence check: The rough rule is "stop when 2 consecutive iterations have zero new unclear points AND metric improvements fall below the thresholds defined in the 'Iteration stopping criteria' section". Make it 3 consecutive for high-importance prompts (see that section's Convergence bullet).

Evaluation axes

Weighting: Qualitative (unclear points / discretionary fill-ins) is primary, quantitative (time / step count) is auxiliary.

Qualitative interpretation of tool_uses

Use tool_uses as a relative value across scenarios to reveal structural defects:

• If one scenario is 3-5x or more vs the others, that skill is a sign of being decision-tree-index-leaning with low self-containment. The executor is being forced into references descent.
• Countermeasure: adding an "inline minimum complete example" or "guidance on when to read references" at the top of SKILL.md in iter 2 significantly drops tool_uses

Even at 100% accuracy, a skew in tool_uses is grounds for triggering iter 2.

Fix propagation patterns (conservative / overshoot / zero-shoot)

Pre-estimation can play out in the following 3 patterns:

• Conservative swing (estimate > actual): one fix aimed at multiple axes but only moved one. "Aiming at multiple axes tends to miss."
• Overshoot (estimate < actual): one structural piece of information (e.g., a combination of command + config + expected output) satisfied judgment wording across multiple axes at once. "Combinations of information structurally hit multiple axes."
• Zero-shoot (estimate > 0, actual = 0): a fix inferred from the axis name did not reach any of the judgment wording. "Axis names and judgment wording are different things."

To stabilize this, before applying the diff, have the subagent verbalize "which judgment wording this fix satisfies". When adding a new evaluation axis, also concretize the judgment criteria for each point down to the threshold-wording level (at a granularity the subagent can judge, such as "all explicit" or "full text of a minimum working configuration" — so it knows what constitutes 2 points).

Subagent invocation contract

The prompt given to the executor takes the following structure. This is the input contract for "two-sided evaluation".

You are an executor reading <target prompt name> with a blank slate.

## Target prompt
<Default: specify an absolute file path the executor will `Read`. Paste the full body inline only when the target has no canonical file location (ephemeral / not-yet-saved prompt) AND is short enough that inlining is cheaper than a Read (rule of thumb: < ~30 lines).>

## Scenario
<One paragraph setting the scenario context>

## Requirements checklist (items the deliverable must satisfy)
1. [critical] <item that belongs to the minimum bar>
2. <normal item>
3. <normal item>
...
(Judgment rules are canonically defined in the "Workflow" section's "Two-sided evaluation — Instruction-side measurements" bullet. At least one [critical] is required; there is no upper bound — if every requirement is genuinely on the minimum bar, marking all of them `[critical]` is valid. The 1-critical-plus-normals mix in the example above is illustrative, not prescriptive.)

## Task
1. `Read` the target prompt **once** at the start; do not re-`Read` it unless the prompt body explicitly instructs you to. Re-reads inflate `tool_uses` and corrupt the instruction-side measurement.
2. Follow the target prompt to execute the scenario and produce the deliverable.
3. On completion, respond with the report structure below.

## Report structure
- Deliverable: <artifact or execution summary>
- Requirement achievement: ○ / × / partial (with reason) for each item
- **Trace** (tag OK / stuck / skipped for each phase, one-line reason when not OK):
  - Understanding (reading the instruction and building a mental model)
  - Planning (deciding the approach / ordering)
  - Execution (actually doing the work)
  - Formatting (shaping the deliverable to the expected form)
  - *Collapsed form allowed*: when all four phases are OK, a single line `Trace: all OK` is sufficient. Emit phase-by-phase only when any phase is stuck or skipped.
- **Unclear points (structured)**: for each issue, three lines:
  - Issue: <what observably happened>
  - Cause: <why, diagnosed at the instruction level>
  - General Fix Rule: <a class-level rule, not a spot fix, that would prevent this class of mistake>
- Discretionary fill-ins: places not fixed by the instruction and filled in by your own judgment (bullets)
- Retries: number of times you redid the same decision and why

The caller extracts the self-report portion from the report, then parses the <usage>...</usage> block at the tail of the Agent tool's return text for tool_uses: / duration_ms: to fill the corresponding rows of the evaluation-axis table.

Environment constraints

In environments where dispatching a new subagent is not possible (already running as a subagent, Agent tool is disabled, etc.), do not run the empirical loop (Workflow steps 2–6 require fresh subagent dispatch). The empirical-loop ban does not mean the whole skill is off-limits — the following static-only modes remain available:

• Alternative 1 — Delegate: ask the parent session's user to start a separate Claude Code session and delegate the evaluation there.
• Alternative 2 — Skip with explicit report: report to the user "empirical evaluation skipped: dispatch unavailable" and stop.
• Alternative 3 — Structural review mode (see below): a sanctioned static review that does not claim to be empirical.
• NG: substitute with a self-reread inside the same agent (bias enters; the result must not be trusted).

Skip return contract:

{
  "status": "skipped",
  "reason": "dispatch unavailable" | "user-elected-skip" | "structural-review-only",
  "iter_0": "PASS" | "PASS-with-note (<gap>)" | "BLOCK-consistency (<gap>)" | "not-run",
  "designed_scenarios_count": <int, 0 if baseline-prep (Workflow Step 1) did not complete (e.g., iter 0 BLOCK-consistency, or aborted mid-Step-1); otherwise the count of scenarios established at baseline-prep>,
  "executed_scenarios_count": 0,
  "alternative_taken": "Alt 1 — Delegate" | "Alt 2 — Skip" | "Alt 3 — Structural review"
}

Emit this fenced JSON block as the final element of the response whenever the empirical loop is skipped. Caller-mandate conflict: even if the caller demands an empirical iter, the Agent-dependent branch cannot honor it under dispatch-unavailable — emit the skip contract above. Do not invent simulated dispatch results to satisfy the caller; that silently violates the bias-free-executor premise.

Selection criteria (when to pick which):

• Step 0 — scope filter (apply before the preferences below): drop any alternative made vacuous by the caller's task framing. Example: when the caller explicitly asked you to "apply the prompt-tuning methodology to ", Alt 2 (skip-and-stop) is vacuous — picking it would fail the request by definition. Apply the preferences below only to surviving alternatives.
• Prefer Alt 1 when the target prompt is high-importance AND the user can readily start a separate session.
• Prefer Alt 2 when (a) the target is large / opaque so even structural review yields little signal, OR (b) the user explicitly wants a "no eval, just ship" answer.
• Prefer Alt 3 when the target is short enough that static consistency / clarity review yields meaningful textual findings on its own (rule of thumb: fits on one screen, ≤ ~80 lines) AND empirical evaluation will not happen soon. Alt 3 can also chain with Alt 1 as "do structural review now, then run empirical later in a separate session".
• Threshold tolerance band for the ≤ ~80 lines rule — apply the following bands:
  • ≤ 80 lines: clear Alt 3 preference (subject to other criteria above).
  • 81 – 120 lines (tolerance band): still take Alt 3 if any one of these holds — (a) the caller's task framing makes Alt 2 vacuous (i.e., Alt 3 is the only surviving alternative after Step 0 scope filter), (b) the body is well-sectioned (clear ##-level structure rather than dense reference prose), or (c) the target's iter-0 verdict suggests the description/body gap is the primary axis of interest (which a static review handles well). Otherwise Alt 2.
  • > 120 lines: clear Alt 2 preference.
  • Count content lines only (exclude frontmatter and blank lines) when applying these bands. Record the line count and band decision in a preamble paragraph immediately above the ## Iteration N heading (same location as the Mode: <empirical|Structural review> declaration per ## Environment constraints § Report shape under structural review mode); the contract JSON schema is fixed and does not carry these values.
• Non-interactive default (no user is available to consult, e.g., single-shot routine execution): default to Alt 3 when the target ≤ ~80 lines; otherwise default to Alt 2 with an explicit "skipped: dispatch unavailable, target too large for static review" report. Do not default to Alt 1 in non-interactive runs.
• Detecting "non-interactive" in observable terms (do not rely on executor introspection — use these signals): treat the run as non-interactive when any one of the following holds:
  1. you were invoked as a subagent (via Agent / Task dispatch) by a parent skill or routine, with no <user_message>-style turn possible in your own context;
  2. your runtime context lacks a foregrounded human conversation (no slash-command-from-user, no chat thread you are responding into);
  3. the caller's prompt explicitly framed the run as routine / batch / scheduled execution. Otherwise treat the run as interactive (user can be addressed via a normal text response and is expected to read it).

Structural review mode: when you want to check only the consistency and clarity of the description of the skill / prompt rather than run empirical evaluation, carve it out explicitly. Note clearly in the request prompt to the subagent (or in your own output, when no dispatch is possible) "this round is structural review mode: text consistency check, not execution". Structural review is an aid to empirical, not a replacement: (a) it cannot be used for consecutive-clear convergence judgment, and (b) its findings are not entered into the Failure pattern ledger — the ledger is for empirical iterations only.

Report shape under structural review mode: structural review borrows the Subagent invocation contract's report skeleton, but execution-bound fields are remapped — apply the table below:

Empirical-only metrics (success/failure on execution scenarios, tool_uses, duration_ms) are N/A under structural review and should be omitted from the Presentation-format execution table, not faked.

Precedence when a caller-supplied report template conflicts with this remap: when the resolved mode is Structural review, this remap table takes precedence over the caller's inlined template — collapse / N/A / omit per the table above, regardless of what the caller's template shows. State once at the top of the report which mode is resolved (e.g. "Mode: Structural review — empirical fields remapped per § Environment constraints").

Domain discipline (applies in both modes): Unclear points and Discretionary fill-ins always report ambiguities / unfixed choices in the prompt-tuning skill itself (the methodology being applied), never findings about the target prompt being evaluated. Target findings flow into Deliverable (in empirical mode as part of the execution artifact; in structural review mode as the primary output). Mixing the two domains makes it impossible to tell "is the prompt-tuning skill unclear?" from "is the target prompt unclear?", which defeats the methodology's improvement loop.

Iteration stopping criteria

• Convergence (stop): 2 consecutive rounds (3 for high-importance prompts, per Workflow's "Convergence check" step) satisfying all of the following:
  • New unclear points: 0
  • Accuracy improvement vs previous: +3 points or less (saturation such as 5% → 8%)
  • Step count variation vs previous: within ±10%
  • Duration variation vs previous: within ±15%
  • Sentinel handling for the two variation checks: rows whose steps or duration cell is — (per ## Presentation format's per-cell sentinel rule) are excluded from the corresponding ±10% / ±15% calculation for that row. The iter still counts toward consecutive-clear judgment if at least the median scenario row has measured values; if every row in the iter is —, the iter does not count.
  • Overfitting check: at convergence judgment, add 1 hold-out scenario not used so far and evaluate. If accuracy drops 15 points or more from the recent average, overfitting. Go back to baseline scenario design and add edges.
• Divergence (suspect the design): if new unclear points do not decrease across 3+ iterations → the design direction of the prompt itself may be wrong. Stop fixing by patches and rewrite the structure
• Resource cutoff: stop when importance and improvement cost no longer balance (the "ship at 80 points" call)

Failure pattern ledger

Maintain a cumulative list of failure modes across iterations. Without it, each iteration re-discovers the same class of mistake, and accuracy improvements stall without the operator noticing that the same General Fix Rule keeps surfacing under different surface wording.

Entry format:

- **Pattern name**: short descriptive handle (not "ambiguous X"; prefer "over-eager template application when skip clause is absent")
  - Example: <representative Issue wording from some iter>
  - General Fix Rule: <the class-level rule from that iter's structured reflection>
  - Seen in: iter N, iter M, ...

Rules:

• Before generating a fix in Workflow step 5, scan the ledger. If the current General Fix Rule matches an existing entry, update Seen in and investigate why the existing fix did not prevent recurrence (wording ambiguity? position too late in the prompt? missing example?) before creating a new entry.
• A pattern that recurs 3+ times despite targeted fixes is a structural signal — escalate to the "Divergence" criterion above rather than continuing to patch.
• The ledger is per-target-prompt, not global across all empirical-prompt-tuning runs.

Variant exploration (optional, plateau-breaking)

When iterations approach a plateau but convergence criteria (2 consecutive clears) are not met, suspect local optimum and run a 2-variant round:

• Conservative variant: current prompt + next-best minor fix
• Exploratory variant: current prompt with one structural change — reorder sections, split a dense paragraph, drop a redundant section, or add a missing scaffolding (e.g., a worked example)

Dispatch fresh subagents on the same scenarios in parallel (one message with multiple Agent tool calls). Keep the variant with higher accuracy; on tie, prefer fewer unclear points; on further tie, prefer lower tool_uses.

Pairwise-comparison caveats:

• Do not ask a subagent to rate "A vs B" directly.
• Compare on the objective axes only (accuracy, step count, unclear-points count, phase-weakness counts).
• If qualitative comparison is genuinely needed, counterbalance: run both orderings (A,B) and (B,A) and accept a verdict only if both orderings agree.

Use when plateau is suspected, not by default.

Presentation format

出力言語: ユーザーへの提示は日本語で行う。ただし以下のトークン / キーは verbatim で残す:

• Convergence check、Iteration N / iter-N、Max iterations
• iter-0: PASS / iter-0: PASS-with-note / iter-0: BLOCK-consistency
• Issue / Cause / General Fix Rule（subagent invocation contract のキー）
• [critical] 等のタグ、設定値（tool_uses / duration_ms 等）、ファイルパス、識別子

ベースライン / プレビューのみのレンダリング規律: イテレーションブロックがベースライン提示のみ（今ラウンドで実行なし）の場合、実行結果テーブルは保持するがすべてのセルを (pending — not dispatched) でマークする。テーブルを暗黙に省略しない。「構造化された反省 / 裁量補完 / 台帳の更新 / 次回の修正案」の各節は通常通り埋めるが、内容の出所が読み替えられる: 「構造化された反省」は iter-0 の静的検出 + ベースライン設計の所見から、「裁量補完」はベースライン設計時の選択（想定状況の数、エッジの種類、下書きプロンプトの選定など）から、「台帳の更新」は通常空（台帳は empirical 専用）。後の iter で dispatch が走ったら、これらの節は本来の出所に戻る。これは「Structural review モード」（## Environment constraints 参照）とは別: 後者は dispatch が 不可能、こちらは dispatch を 意図的に後回し にしているケース。

部分イテレーション行のセル単位センチネル: 今 iter で dispatch を試みたが一部の想定状況の指標が取れなかった場合（例: 1 想定状況がタイムアウト、Workflow Step 1 の |executed| < |designed| ルールでリソース上の理由から除外、または <usage> ブロックがパースできない応答）、該当セルに —（em-dash）を入れる。これは iter 全体の (pending — not dispatched) 形式とは区別される: — は dispatch 済み iter 内のセル単位扱い。手順数 または 所要時間 の列に — を含む行は、## Iteration stopping criteria の「手順数の変動 ±10%」「所要時間の変動 ±15%」の計算から 除外 される（行単位の除外。中央値の想定状況の行に実測値が残っていれば iter は連続クリア判定に算入される）。0 / N/A / 空白 / 推測値で代用しないこと。

各イテレーションで、ユーザーには以下の形式で記録・提示する:

## Iteration N

### 変更内容（前回比）
- <1 行の修正内容>
- 適用パターン: <ledger 内のパターン名、または「（新規）」>

### 実行結果（想定状況ごと）
| 想定状況 | 成否 | 達成率 | 手順数 | 所要時間 | やり直し | 弱い段階 |
|---|---|---|---|---|---|---|
| A | ○ | 90% | 4 | 20s | 0 | — |
| B | × | 60% | 9 | 41s | 2 | 実行 |

### 構造化された反省（今回新たに surface したもの）
- <想定状況 B>: [critical] 項目 N が × — <1 行で達成できなかった理由>
  - Issue: <観測された事実>
  - Cause: <指示側の原因>
  - General Fix Rule: <同種ミスを防ぐ汎用ルール>
- <想定状況 A>: （新規なし）

### 裁量補完（今回新たに surface したもの）
- <想定状況 B>: <補完内容>

### 失敗パターン台帳の更新
- 追加: <パターン名>（想定状況 B から）
- 再観測: <パターン名>（初観測 iter K）— 既存の修正で再発を防げなかった理由: <理由>

### 次回の修正案
- <1 行の最小修正>

(Convergence check: X consecutive clears / Y rounds remaining to stop condition)

Skipped-iteration form（iter 全体が ## Environment constraints に従ってスキップされたケース。上で説明したセル単位のケースとは別）: ## Iteration N の見出しを出し、すべての指標セルを — で埋め、iter 0 の判定をテーブル直上に書く（iter 0 自体がスキップなら not-run）。この判定行は Workflow Step 0 で要求される iter-0 出力を 置き換える（追加でなく置換）。1 か所のみに判定を出す。さらに、iter-0 判定行とテーブルの間に > **Iter skipped** — see the skip return contract at the end of the response for alternative_takenandreason. をブロック引用で挿入する。応答の 最後の要素 として、## Environment constraints の fenced な skip return contract を付ける。スキップ iter は ## Iteration stopping criteria の連続クリア判定に算入されない。

スキップ iter 形式での他セクションの扱い（上のテンプレートに出てくる各セクションの扱い）:

• 変更内容（前回比）: 残す — (差分適用なし; iter skipped) と書き、適用パターン 行は ledger 由来の既知パターンがあればその名前、なければ 適用パターン: (該当なし — skipped)
• 実行結果（想定状況ごと）: テーブルは残す。すべての指標セルが —（上のレンダリング規律どおり）
• 構造化された反省（今回新たに surface したもの）: 残す — Alt 3（Structural review）が選択されていれば、その静的レビューが prompt-tuning スキル自体に対して挙げた分かりにくい点から記載（## Environment constraints の Domain discipline 参照）。Alt 1 / Alt 2 で静的レビューがなかった場合は空（(反省なし — 静的レビューなしで iter skipped)）
• 裁量補完（今回新たに surface したもの）: 構造化された反省と同じ出所ルール — 静的レビューが供給した場合のみ載せる。それ以外はセクション見出しごと省略
• 失敗パターン台帳の更新: 常に空（(更新なし — 台帳は empirical 専用、§ Failure pattern ledger 参照)）
• 次回の修正案: 静的レビュー（Alt 3）が prompt-tuning スキル自体または対象プロンプトに対して具体的な改善候補を出した場合 のみ 載せる。それ以外は省略。スキップ iter 形式は、empirical 評価でない内省から得た修正案を入れる場所ではない。空欄を埋めるための捏造はしない
• スキップ前のベースライン準備の成果物（想定状況の設計 + 各々の評価項目チェックリスト。Workflow Step 1 でスキップ判断より前に作られたもの）: スキップ時に失われない。標準の扱い — 実行結果テーブルの直前に、サブ見出し ### 設計済み想定状況（次イテレーションに繰越） の下にインラインで出す。Alt 3 では、想定状況が Deliverable からも参照される場合がある（対象の静的レビューが想定状況の枠組みを使う時）。標準のレンダリングは 設計済み想定状況 ブロックに残す。Alt 1 / Alt 2 で静的レビューなしの場合でもこのブロックは出す。退化ケース — ベースライン準備が走らなかった（Step 0 のスコープフィルタ / Pre-flight callability check が Workflow Step 1 に入る前にスキップを決定し、designed_scenarios_count = 0 となった場合）: ### 設計済み想定状況（次イテレーションに繰越） の見出しを残し、中身を (なし — ベースライン準備未実行; Step 1 前にスキップ判断が確定) の 1 行で置き換える。見出しを暗黙に省略しないこと
• 末尾の収束チェック行: (Convergence check: <X> consecutive clears / iter skipped, does not advance) を出す。

Red flags (beware of rationalization)

Common failures

• Scenario too easy / too hard: neither produces signal. One at the median of real use, one edge
• Only looking at metrics: chasing only time reduction strips important explanations and makes it fragile
• Too many changes per iteration: you can no longer trace "which fix back then worked". One theme per iteration (2-3 related micro-fixes can be bundled — see Workflow's "Apply the diff" step and the Red flags table)
• Tuning scenarios to match the fix: making the scenario side easier just to make unclear points look eliminated → putting the cart before the horse
• Mechanism-focused [critical] items: putting a runtime-mechanism check into [critical] instead of an outcome property of the deliverable. See Workflow Step 1's "Mechanism vs outcome — checklist items judge the deliverable, not the runtime" bullet.