Options Payoff

Options Payoff — Option P&L Analysis Methodology

Overview

This skill is designed for option strategy analysis scenarios within the Vibe-Trading quantitative framework, covering:

• P&L curve generation for single-leg and multi-leg option portfolios
• Black-Scholes pricing and Greeks calculation
• Implied volatility inversion
• Strategy selection decision support

Constraint: For research and backtesting only. Do not output live trading instructions, in line with the project's guardrails.

Built-in execution tool

Load this skill for methodology, then call options_payoff for production calculations. Pass signed legs (qty > 0 long, qty < 0 short), entry_spot, and expiry_days; optionally pass actual per-share premiums, multiplier, commission, chart bounds, and IV scenarios. The tool returns an expiry curve, a spot × IV scenario matrix, and analytic breakeven/max-risk results that do not depend on the display grid containing every strike.

1. Supported Strategy Types

1.1 Single-Leg Strategies

1.2 Vertical Spreads

1.3 Straddles / Strangles (Volatility Strategies)

1.4 Butterflies / Iron Butterflies

1.5 Condors / Iron Condors

Here K1 < K2 < K3 < K4, and K2 / K3 are usually OTM.

1.6 Calendar Spreads (Time Spreads)

Calendar spreads profit because near-month Theta decay is faster than far-month Theta decay.

1.7 Ratio Spreads

1.8 Protective / Hedging Strategies

2. Black-Scholes Pricing Model

2.1 Core Assumptions

• The underlying price follows geometric Brownian motion (lognormal distribution)
• Risk-free rate r is constant
• Volatility σ is constant (historical or implied)
• No dividends, or adjust with a continuous dividend yield q
• European options only (exercise at expiration)

2.2 Full Formula

S  = current underlying price
K  = strike price
T  = time to expiration (years)
r  = risk-free rate (annualized continuous compounding)
q  = continuous dividend yield (commonly used for China A-share / index options)
σ  = annualized volatility
N  = standard normal CDF

d1 = [ln(S/K) + (r - q + σ²/2) × T] / (σ × √T)
d2 = d1 - σ × √T

Call = S × e^(-qT) × N(d1) - K × e^(-rT) × N(d2)
Put  = K × e^(-rT) × N(-d2) - S × e^(-qT) × N(-d1)

2.3 Put-Call Parity

Call - Put = S × e^(-qT) - K × e^(-rT)

Use this to verify pricing consistency and detect arbitrage. When dividends exist, replace S with S × e^(-qT).

2.4 Greeks Calculation

Delta (Price Sensitivity)

Delta(Call) = e^(-qT) × N(d1)
Delta(Put)  = e^(-qT) × (N(d1) - 1)

• Range: Call [0, 1], Put [-1, 0]
• ATM ≈ ±0.5, deep ITM → ±1, deep OTM → 0

Gamma (Rate of Change of Delta)

Gamma = e^(-qT) × N'(d1) / (S × σ × √T)

N'(x) = (1/√(2π)) × e^(-x²/2)  [standard normal PDF]

• Calls and puts have the same Gamma
• Gamma is highest near ATM and explodes as expiration approaches

Theta (Time Decay, per day)

Theta(Call) = [-S × e^(-qT) × N'(d1) × σ / (2√T)
               - r × K × e^(-rT) × N(d2)
               + q × S × e^(-qT) × N(d1)] / 365

Theta(Put)  = [-S × e^(-qT) × N'(d1) × σ / (2√T)
               + r × K × e^(-rT) × N(-d2)
               - q × S × e^(-qT) × N(-d1)] / 365

• Usually negative for option holders
• ATM options near expiration have the largest Theta magnitude, which benefits option sellers the most

Vega (Volatility Sensitivity, per 1% vol change)

Vega = S × e^(-qT) × N'(d1) × √T / 100

• Calls and puts have the same Vega
• ATM Vega is the largest, and Vega approaches 0 at expiration

Rho (Interest Rate Sensitivity, per 1% rate change)

Rho(Call) = K × T × e^(-rT) × N(d2) / 100
Rho(Put)  = -K × T × e^(-rT) × N(-d2) / 100

• The rate effect is usually small and often negligible for short-dated options

2.5 Implied Volatility Inversion (Newton-Raphson)

Given a market price P_market, solve for σ such that BS(σ) = P_market:

Iteration:
σ_{n+1} = σ_n - [BS(σ_n) - P_market] / Vega(σ_n)

Stopping condition: |BS(σ_n) - P_market| < 1e-6

Initial guess:
σ_0 = √(2π/T) × P_market/S  (Brenner-Subrahmanyam approximation)

Notes:
- If Vega is close to 0 (deep OTM / ITM), switch to bisection
- If the iteration does not converge (>100 rounds), return NaN and raise a warning
- IV > 500% is usually an outlier and should be filtered

This is already implemented, guards included, as src.quantlib.options.implied_volatility — see section 4.1. The formulas above document what it computes; they are not an instruction to rewrite it.

3. Payoff Diagram Analysis

3.1 Expiry Payoff Curve

Calculation logic:

For each leg i (Call/Put, Long/Short, strike K_i, quantity n_i):
  Payoff_i(S_T) = n_i × direction_i × max(0, S_T - K_i)  # Call
  Payoff_i(S_T) = n_i × direction_i × max(0, K_i - S_T)  # Put

Where direction = +1 (Long) / -1 (Short)

Portfolio payoff = Σ Payoff_i - net premium cost
  (paid premium is positive, received premium is negative)

X-axis range: [min(K) × 0.7, max(K) × 1.3], step size 0.5 or 1

3.2 Theoretical Value Curve (Current Black-Scholes Pricing)

For each underlying price S, hold T, r, and σ constant and compute current theoretical PnL using the Black-Scholes formula:

TheoValue(S) = Σ n_i × direction_i × BS_price(S, K_i, T, r, σ, type_i) - net premium cost

The gap between the theoretical value curve and the expiry curve equals the remaining time value.

3.3 Break-Even Points

Expiry payoff is piecewise linear. Solve Payoff(S_T) = 0 on intervals formed by S=0, every unique strike, and the right tail. Do not search only the chart grid: a narrow grid can miss a valid root beyond its bounds.

• Single-leg strategies:
  • Long Call BEP = K + premium
  • Long Put BEP = K - premium
  • Short Call BEP = K + premium received
  • Short Put BEP = K - premium received
• Multi-leg strategies can have more than two breakevens; inspect every strike interval and the unbounded right interval.

3.4 Max Profit / Max Loss

Evaluate payoff at S=0 and every unique strike. Those are all finite points where slope can change, so finite extrema occur in that set. Then inspect the right-tail slope: positive means unlimited profit, negative means unlimited loss, and zero means the payoff remains flat. Never derive max profit/loss only from sampled chart points.

3.5 P&L Under Different Volatility Scenarios

Generate a σ scenario matrix using current IV × [0.5, 0.75, 1.0, 1.25, 1.5]. Plot one theoretical value curve for each σ and distinguish them by color to observe Vega sensitivity.

4. Python Code Templates

4.1 Black-Scholes Pricing Functions — Import, Do Not Retype

bs_price, bs_greeks and implied_volatility are implemented once in src/quantlib/options.py and pinned by tests/quantlib/test_options.py (published Hull reference values, put-call parity, Greeks against finite-difference bumps, implied-vol round-trips). Import them.

Do not retype the formulas from section 2 into your own helper. A retyped copy is a different, untested function on every run, and the copies that used to live here had two live defects: they crashed on a non-positive spot or strike, and they reported a zero Delta for an expiring in-the-money option.

from src.quantlib.options import bs_greeks, bs_price, implied_volatility

price = bs_price(S=100, K=100, T=0.25, r=0.03, sigma=0.20, option_type="call", q=0.0)
greeks = bs_greeks(100, 100, 0.25, 0.03, 0.20, "call")   # delta gamma theta vega rho
iv = implied_volatility(market_price=5.0, S=100, K=100, T=0.25, r=0.03, option_type="call")

Argument order is (S, K, T, r, sigma, option_type="call", q=0.0) for both pricing functions; implied_volatility takes market_price first, then (S, K, T, r, option_type="call", q=0.0, tol=1e-6, max_iter=200).

Contract worth knowing before you use the numbers:

4.2 Multi-Leg Portfolio Payoff Calculation

from dataclasses import dataclass
from typing import Literal

import numpy as np
from scipy.optimize import brentq

from src.quantlib.options import bs_price

@dataclass
class OptionLeg:
    """Single option leg definition.

    Attributes:
        option_type: "call" or "put"
        K: Strike price
        direction: +1 for Long / -1 for Short
        quantity: Number of contracts, defaults to 1
        premium: Actual traded premium, positive when paid and negative when received
        T: Time to expiration in years, used for theoretical Black-Scholes pricing
        sigma: Volatility used in pricing
    """
    option_type: Literal["call", "put"]
    K: float
    direction: int  # +1 or -1
    quantity: float = 1.0
    premium: float = 0.0
    T: float = 0.25
    sigma: float = 0.20


def compute_expiry_payoff(
    legs: list[OptionLeg],
    S_range: np.ndarray,
) -> np.ndarray:
    """Calculate the expiry payoff curve.

    Args:
        legs: Option legs
        S_range: Array of underlying prices

    Returns:
        Payoff array aligned with S_range, including premium cost
    """
    total_payoff = np.zeros(len(S_range))
    net_premium = sum(leg.direction * leg.quantity * leg.premium for leg in legs)

    for leg in legs:
        if leg.option_type == "call":
            intrinsic = np.maximum(S_range - leg.K, 0)
        else:
            intrinsic = np.maximum(leg.K - S_range, 0)
        total_payoff += leg.direction * leg.quantity * intrinsic

    return total_payoff - net_premium


def compute_theo_value(
    legs: list[OptionLeg],
    S_range: np.ndarray,
    r: float = 0.03,
    q: float = 0.0,
) -> np.ndarray:
    """Calculate the theoretical value curve under current Black-Scholes pricing.

    Args:
        legs: Option legs, each carrying T and sigma
        S_range: Array of underlying prices
        r: Risk-free rate
        q: Continuous dividend yield

    Returns:
        Theoretical PnL array
    """
    total_value = np.zeros(len(S_range))
    net_premium = sum(leg.direction * leg.quantity * leg.premium for leg in legs)

    for leg in legs:
        prices = np.array([
            bs_price(S, leg.K, leg.T, r, leg.sigma, leg.option_type, q)
            for S in S_range
        ])
        total_value += leg.direction * leg.quantity * prices

    return total_value - net_premium


def find_breakeven_points(
    S_range: np.ndarray,
    payoff: np.ndarray,
) -> list[float]:
    """Solve for break-even points numerically.

    Returns:
        A list of break-even points, from 0 to many depending on the structure
    """
    beps = []
    for i in range(len(S_range) - 1):
        if payoff[i] * payoff[i + 1] < 0:
            bep = brentq(
                lambda s: np.interp(s, S_range, payoff),
                S_range[i], S_range[i + 1],
                xtol=0.01
            )
            beps.append(round(bep, 2))
    return beps

4.3 Matplotlib Payoff Diagram

import matplotlib.pyplot as plt
import matplotlib.ticker as mticker

def plot_payoff_diagram(
    legs: list[OptionLeg],
    S_current: float,
    r: float = 0.03,
    q: float = 0.0,
    title: str = "Option Payoff Diagram",
    figsize: tuple = (10, 6),
) -> plt.Figure:
    """Plot the payoff diagram for an option portfolio.

    Args:
        legs: Option legs
        S_current: Current underlying price
        r: Risk-free rate
        q: Continuous dividend yield
        title: Chart title
        figsize: Figure size

    Returns:
        A matplotlib Figure object
    """
    K_values = [leg.K for leg in legs]
    S_lo = min(K_values) * 0.70
    S_hi = max(K_values) * 1.30
    S_range = np.linspace(S_lo, S_hi, 500)

    expiry_pnl = compute_expiry_payoff(legs, S_range)
    theo_pnl = compute_theo_value(legs, S_range, r, q)
    beps = find_breakeven_points(S_range, expiry_pnl)

    fig, ax = plt.subplots(figsize=figsize)

    # Shade profit and loss regions.
    ax.fill_between(S_range, expiry_pnl, 0,
                    where=(expiry_pnl >= 0), alpha=0.15, color="green", label="_nolegend_")
    ax.fill_between(S_range, expiry_pnl, 0,
                    where=(expiry_pnl < 0), alpha=0.15, color="red", label="_nolegend_")

    # Expiry payoff curve.
    ax.plot(S_range, expiry_pnl, color="steelblue", linewidth=2.0, label="Expiry P&L")

    # Theoretical value curve.
    ax.plot(S_range, theo_pnl, color="darkorange", linewidth=1.5,
            linestyle="--", label="Current theoretical value")

    # Zero axis.
    ax.axhline(0, color="black", linewidth=0.8, linestyle="-")

    # Current price line.
    ax.axvline(S_current, color="gray", linewidth=1.0, linestyle=":",
               label=f"Spot {S_current:.2f}")

    # Strike annotations.
    for K in K_values:
        ax.axvline(K, color="purple", linewidth=0.6, linestyle="--", alpha=0.5)
        ax.text(K, ax.get_ylim()[0], f"K={K}", fontsize=8,
                rotation=90, va="bottom", color="purple")

    # Break-even points.
    for bep in beps:
        ax.scatter([bep], [0], color="red", zorder=5, s=50)
        ax.annotate(f"BEP\n{bep:.2f}", xy=(bep, 0),
                    xytext=(bep, max(expiry_pnl) * 0.15),
                    fontsize=8, ha="center", color="red",
                    arrowprops=dict(arrowstyle="->", color="red", lw=0.8))

    # Max profit / max loss summary.
    max_p = max(expiry_pnl)
    max_l = min(expiry_pnl)
    stats_text = (
        f"Max profit: {'Unlimited' if max_p > 1e6 else f'{max_p:.2f}'}\n"
        f"Max loss: {'Unlimited' if max_l < -1e6 else f'{max_l:.2f}'}\n"
        f"Break-even: {', '.join([str(b) for b in beps]) if beps else 'None'}"
    )
    ax.text(0.02, 0.97, stats_text, transform=ax.transAxes,
            fontsize=9, va="top", bbox=dict(boxstyle="round", fc="white", alpha=0.8))

    ax.set_xlabel("Underlying price")
    ax.set_ylabel("P&L")
    ax.set_title(title)
    ax.legend(loc="upper right")
    ax.yaxis.set_major_formatter(mticker.FuncFormatter(lambda x, _: f"{x:,.0f}"))
    ax.grid(True, alpha=0.3)
    plt.tight_layout()

    return fig

4.4 Plotly Interactive Payoff Diagram (Recommended for Frontend Display)

import plotly.graph_objects as go

def plot_payoff_plotly(
    legs: list[OptionLeg],
    S_current: float,
    r: float = 0.03,
    q: float = 0.0,
    title: str = "Option Payoff Diagram",
    sigma_scenarios: list[float] | None = None,
) -> go.Figure:
    """Generate a Plotly interactive payoff diagram with optional multi-sigma scenarios.

    Args:
        sigma_scenarios: For example [0.10, 0.15, 0.20, 0.25, 0.30].
            If None, use each leg's own sigma.
    """
    K_values = [leg.K for leg in legs]
    S_range = np.linspace(min(K_values) * 0.70, max(K_values) * 1.30, 500)
    expiry_pnl = compute_expiry_payoff(legs, S_range)

    fig = go.Figure()

    # Expiry payoff.
    fig.add_trace(go.Scatter(
        x=S_range, y=expiry_pnl,
        name="Expiry P&L", line=dict(color="steelblue", width=2),
        fill="tozeroy",
        fillcolor="rgba(70,130,180,0.1)",
    ))

    # Theoretical value under multiple volatility scenarios.
    if sigma_scenarios:
        colors = ["#FF6B6B", "#FFA500", "#4CAF50", "#2196F3", "#9C27B0"]
        for i, sigma in enumerate(sigma_scenarios):
            scenario_legs = [
                OptionLeg(
                    option_type=leg.option_type, K=leg.K,
                    direction=leg.direction, quantity=leg.quantity,
                    premium=leg.premium, T=leg.T, sigma=sigma
                )
                for leg in legs
            ]
            theo = compute_theo_value(scenario_legs, S_range, r, q)
            fig.add_trace(go.Scatter(
                x=S_range, y=theo,
                name=f"IV={sigma*100:.0f}%",
                line=dict(color=colors[i % len(colors)], width=1.5, dash="dash"),
            ))
    else:
        theo_pnl = compute_theo_value(legs, S_range, r, q)
        fig.add_trace(go.Scatter(
            x=S_range, y=theo_pnl,
            name="Current theoretical value",
            line=dict(color="darkorange", width=1.5, dash="dash"),
        ))

    # Zero line and current price line.
    fig.add_hline(y=0, line_dash="solid", line_color="black", line_width=0.8)
    fig.add_vline(x=S_current, line_dash="dot", line_color="gray",
                  annotation_text=f"Spot {S_current:.2f}", annotation_position="top right")

    # Strikes.
    for K in set(K_values):
        fig.add_vline(x=K, line_dash="dash", line_color="purple",
                      line_width=0.8, opacity=0.5)

    fig.update_layout(
        title=title,
        xaxis_title="Underlying price",
        yaxis_title="P&L",
        hovermode="x unified",
        template="plotly_white",
        legend=dict(orientation="h", yanchor="bottom", y=1.02, xanchor="right", x=1),
    )

    return fig

4.5 Greeks Profile vs Underlying Price

from src.quantlib.options import bs_greeks

def plot_greeks_profile(
    legs: list[OptionLeg],
    S_current: float,
    r: float = 0.03,
    q: float = 0.0,
    greeks_to_plot: list[str] | None = None,
) -> go.Figure:
    """Plot portfolio Greeks as functions of the underlying price.

    Args:
        greeks_to_plot: Defaults to ["delta", "gamma", "vega", "theta"]
    """
    if greeks_to_plot is None:
        greeks_to_plot = ["delta", "gamma", "vega", "theta"]

    K_values = [leg.K for leg in legs]
    S_range = np.linspace(min(K_values) * 0.70, max(K_values) * 1.30, 300)

    # Compute portfolio Greeks.
    greek_values = {g: np.zeros(len(S_range)) for g in greeks_to_plot}
    for leg in legs:
        for j, S in enumerate(S_range):
            g = bs_greeks(S, leg.K, leg.T, r, leg.sigma, leg.option_type, q)
            for name in greeks_to_plot:
                greek_values[name][j] += leg.direction * leg.quantity * g[name]

    # Plot subplots.
    from plotly.subplots import make_subplots
    n = len(greeks_to_plot)
    fig = make_subplots(rows=n, cols=1, shared_xaxes=True,
                        subplot_titles=[g.capitalize() for g in greeks_to_plot])

    greek_colors = {"delta": "steelblue", "gamma": "green",
                    "theta": "red", "vega": "darkorange", "rho": "purple"}

    for i, name in enumerate(greeks_to_plot, start=1):
        fig.add_trace(
            go.Scatter(x=S_range, y=greek_values[name],
                       name=name.capitalize(),
                       line=dict(color=greek_colors.get(name, "gray"), width=2)),
            row=i, col=1
        )
        fig.add_hline(y=0, line_dash="dot", line_color="black",
                      line_width=0.5, row=i, col=1)
        fig.add_vline(x=S_current, line_dash="dash", line_color="gray",
                      line_width=0.8, row=i, col=1)

    fig.update_layout(
        title="Greeks Profile",
        height=200 * n,
        showlegend=False,
        template="plotly_white",
    )

    return fig

5. Practical Usage

5.1 Strategy Selection Decision Tree by Market View

Market view
├── Strongly bullish
│   ├── Willing to pay premium → Long Call
│   └── Want lower cost → Bull Call Spread
├── Moderately bullish
│   ├── Already hold the underlying → Covered Call (income enhancement)
│   └── No existing position → Bull Put Spread (net credit)
├── Moderately bearish
│   ├── Already hold the underlying → Protective Put or Collar
│   └── No existing position → Bear Call Spread (net credit)
├── Strongly bearish
│   ├── Willing to pay premium → Long Put
│   └── Want lower cost → Bear Put Spread
├── Range-bound market (low-IV environment)
│   ├── Wide range → Short Strangle
│   ├── Narrow range → Short Straddle
│   └── Want limited risk → Iron Condor / Iron Butterfly
└── Large move expected (low-IV environment)
    ├── Direction unclear → Long Straddle / Long Strangle
    └── Slight directional bias → Call / Put Back Spread

5.2 Volatility Environment → Strategy Mapping

IV Rank formula:

iv_rank = (current_iv - iv_52w_low) / (iv_52w_high - iv_52w_low) * 100

IV Percentile: The historical percentile rank of current IV over the last 252 trading days.

5.3 When to Roll or Adjust

Rolling

• Trigger: Option Delta moves outside the target range, or time to expiration < 21 days
• Rolling Up / Down: Close the current leg and reopen at a higher / lower strike while keeping the same directional bias
• Rolling Out: Close the near-month leg and reopen further out on the curve to harvest additional time value
• Cost assessment: Compare the net debit / credit of the roll with the payoff from simply holding to expiration

Adjusting

• Delta-neutral rebalancing: Hedge with underlying or options when portfolio Delta deviates from target by more than ±0.10
• Gamma scalping: Under a Long Gamma portfolio, hedge Delta after large underlying moves to lock in gains
• Stop-loss rule: Force liquidation when losses reach 2× the initial premium received, a common rule for Iron Condors

Common Adjustment Examples

Iron Condor gets breached:

Underlying rallies above the short call:
1. Close the call spread and realize the loss
2. Reassess directional view:
   - Still bullish → reopen a higher put spread to preserve neutrality
   - Not bullish → close the entire portfolio

Covered Call faces assignment risk:

Underlying approaches the call strike:
1. Assess whether you are willing to sell the underlying at that price
   - Yes → allow assignment and keep premium + capital gain
   - No → Roll Up & Out to a higher strike and/or later expiration

Quick Usage Example

from src.quantlib.options import implied_volatility

# Example: Iron Condor payoff diagram
legs = [
    OptionLeg("put",  K=90,  direction=-1, premium=1.5, T=0.083, sigma=0.20),
    OptionLeg("put",  K=85,  direction=+1, premium=0.5, T=0.083, sigma=0.20),
    OptionLeg("call", K=110, direction=-1, premium=1.5, T=0.083, sigma=0.20),
    OptionLeg("call", K=115, direction=+1, premium=0.5, T=0.083, sigma=0.20),
]

fig = plot_payoff_plotly(
    legs, S_current=100.0,
    title="Iron Condor (85/90/110/115, 1 month)",
    sigma_scenarios=[0.15, 0.20, 0.25, 0.30],
)
fig.show()

# Implied volatility example
iv = implied_volatility(
    market_price=5.0, S=100, K=100,
    T=0.25, r=0.03, option_type="call"
)
print(f"Implied volatility: {iv:.2%}")  # 23.25%