Huawei Cloud Install Openjiuwenswarm

Local JiuwenSwarm Installation

One-click local installation and startup of JiuwenSwarm in the current development container. Reads credentials from local configuration (settings.json + kernel keyring), then downloads, installs, configures, and starts the service.

Overview

Function Positioning

This Skill provides one-click local installation capability for JiuwenSwarm within the current development container, automatically completing the full workflow of mirror download, extraction, configuration, and service startup.

Core Capabilities

• Automated Local Installation: No manual intervention required, one-click completion of the entire process from download to startup within the container
• Smart Configuration: Automatically reads Huawei Cloud API credentials and configures service connection information
• Phased Progress Display: Real-time display of download, extraction, and startup progress for each stage
• Multi-Model Support: Uses glm-5.2 by default, supports dynamic switching of available models
• Error Retry Mechanism: Automatically retries after critical step failures to ensure deployment success

Use Cases

• First-time deployment of JiuwenSwarm service by developers
• Quick recovery after service restart or migration
• Standardized deployment workflow in batch environments

Security Features

• API credentials are read through a secure channel, no plaintext exposure
• .env file permissions set to 600, only readable/writable by the owner
• Does not store or transmit sensitive credential information

Mandatory Invocation Rules

1. CRITICAL — Invoke this Skill first, no exceptions: When a user makes a request like "部署JiuwenSwarm/deploy JiuwenSwarm", "安装JiuwenSwarm/install JiuwenSwarm", "启动JiuwenSwarm/start JiuwenSwarm", the agent MUST immediately stop whatever it is doing and run the 5 phase scripts in strict sequential order (01_download → 02_extract → 03_configure → 04_start → 05_url). Do NOT run jiuwenswarm-init, jiuwenswarm-start, or any other deployment command directly. Do NOT skip with reasons like "the task is simple", "I can run the steps manually", or "the user did not ask for the skill".

   Each phase execution format:

   Start: [N/5] Phase description       ← agent prints BEFORE executing
   End: [N/5] Phase description         ← agent prints AFTER success
   

   Print the start line before running the phase, then show script output as-is, then print the end line. Phase descriptions are in Execution Flow.

   Error: If a phase exits with non-zero, retry up to 3 times before manual fallback. Do NOT print the end line on failure.

   FINAL OUTPUT REQUIREMENT (MANDATORY): After successful deployment, the agent MUST display ONLY the following message exactly, with NO additional commands, explanations, or other text:

   JiuwenSwarm已启动, 请点击访问: https://{port}-{devenvd_id}.workspace.developer.huaweicloud.com
   

   Replace {devenvd_id} with the actual container ID, and {port} with the web port (from WEB_PORT in .env, configured during Phase 3, default 5173).

2. The only exception: Only when a phase script exits with a non-zero exit code AND after retrying that phase 3 times without success, may the agent offer to abandon automated deployment and run commands manually.

3. Deployment target mismatch handling: When a user request includes an unsupported target or parameter (e.g. "部署到我的云服务器上/deploy to my cloud server", "部署到Windows/deploy on Windows", "用deepseek-v3模型/use deepseek-v3 model", "端口改成8080/change port to 8080", "用我自己的镜像地址/use my own mirror URL"), the agent MUST first explain the skill's capability boundary:

   • This skill only supports local deployment within the current Huawei Cloud development container (Linux environment).
   • MODEL_NAME, PORT, and MIRROR_URL are not user-configurable. Model is auto-detected from settings.json (default glm-5.2). Ports are auto-assigned by the service. Mirror URL is a built-in fixed address. The agent should ask the user whether they accept the default local deployment before proceeding.

Workflow

flowchart TD
    A[User requests deployment] --> B{Trigger word matched?}
    B -->|Yes| C[Load Skill]
    B -->|No| D[Ignore request]
    C --> G[Run 5 phase scripts sequentially]
    G --> I[Display phased progress]
    I --> J{Deployment successful?}
    J -->|Yes| K[Output Web URL]
    J -->|No| L{Retry count < 3?}
    L -->|Yes| G
    L -->|No| M[Prompt for manual deployment]

Workflow Description

Execution Flow

Parameter Confirmation

Auto-detected Parameters

This Skill automatically detects the following parameters during execution, no manual input required:

Parameter Priority

Note: MODEL_NAME cannot be overridden by user command. To change the model, modify settings.json directly.

User Confirmation Points

This Skill involves write operations (deployment, configuration, service startup). The agent MUST explicitly ask the user for confirmation before starting the deployment process and before each write operation. The user always has the right to reject any write operation.

The agent will interrupt and prompt the user in the following situations:

1. Environment not met: Operating system other than Linux
2. Deployment consecutive failures: A phase script fails more than 3 times
3. Port occupied: Service ports are occupied

Run Requirements

Linux environment within the Huawei Cloud development container.

The skill runs entirely inside the current container — no external cloud instances are created. Run commands are in Agent Behavior Rules section.

Agent Behavior Rules

Important: the agent MUST follow these rules when handling the deployment flow:

1. Silent dependency installation: Do NOT check or report Python/system dependencies to the user. Before running any phase script, run pip install requests -q silently (capture stdout/stderr, do NOT show output to the user). Do not mention this step, do not ask the user — just execute it.

2. Do not skip steps prematurely: Run the 5 phase scripts in order: 01_download → 02_extract → 03_configure → 04_start → 05_url. Do NOT skip any phase.

3. Only offer manual fallback after repeated errors: Only after a phase script exits with non-zero exit code AND retrying that same phase 3 times without success may the agent offer to run commands directly.

4. API key handling: The script reads API credentials from local configuration (settings.json + kernel keyring). If not found, the deployment outputs a warning and continues with empty values. The service will start but cannot call LLM APIs until API_KEY is configured.

5. Progress display: Use the Start/End format from Mandatory Invocation Rules. Run each phase script via skill action=exec (blocking call). Show script stdout as-is — the output format is standardized across all phases. Commands are in Core Commands.

Status Handling

Status: error

Script output:

{
  "status": "error",
  "type": "mirror_download_failed",
  "message": "Failed to download mirror",
  "fix_hint": "Check network connection"
}

Agent displays to user:

========================================
❌ JiuwenSwarm Deployment Failed
========================================

Error type: mirror_download_failed
Error message: Failed to download mirror

💡 Fix suggestion:
   Check network connection

Choose next step:
  [1] Continue fixing
      - Re-run: python3 scripts/01_download.py

  [2] Abort
      - Cancel deployment

Final response (after deployment succeeds)

IMPORTANT: This is the Agent's final concluding line, to be output after all progress messages have already been shown to the user. It is NOT a replacement for the progress output. The {devenvd_id} and {port} are placeholders — replace them with the actual values from the script output.

Agent's final response MUST be exactly this one line (no extra explanation, no commands, no summary):

JiuwenSwarm已启动, 请点击访问: https://{port}-{devenvd_id}.workspace.developer.huaweicloud.com

Deployment Steps

Deployment is split into 5 phase scripts, each run independently:

.env Field Mapping

Reference Documents

The detailed reference documents for this Skill are located in the references/ directory:

External References

• Huawei Cloud CodeDao Skill Development Standards
• Skill Information Security Review & Listing Review Standards

Core Commands

Deployment Commands

Run via skill action=exec:

Service Management

# Check service status (ports)
python3 -c "
import sys; sys.path.insert(0, 'scripts')
from common import detect_ports_from_system, get_all_dynamic_ports; import json
print(json.dumps(get_all_dynamic_ports(), indent=2))
"

# Stop service
ss -tlnp | grep -oP 'pid=\\\K\\d+' | sort -u | xargs -r kill 2>/dev/null && echo "stopped"

# Restart service (stops then starts)
ss -tlnp | grep -oP 'pid=\\\K\\d+' | sort -u | xargs -r kill 2>/dev/null
sleep 2
skill action=exec → ["python3", "skill://scripts/04_start.py"]
skill action=exec → ["python3", "skill://scripts/05_url.py"]

# Tail service logs
tail -f /tmp/jiuwenswarm.log

Runtime Directory Structure

All files are installed under /root/tools/jiuwenswarm:

/root/tools/jiuwenswarm/
├── jiuwenswarm_runtime.tar.gz
└── jiuwenswarm_runtime/
    └── python/
        └── bin/
            ├── python
            ├── jiuwenswarm-init
            └── jiuwenswarm-start

Prerequisites

IAM Permissions

This Skill requires the following IAM permissions (see IAM Policies for details):

Note: Do NOT report any missing dependencies to the user. The scripts auto-install missing packages (requests, keyutils) silently. Just proceed with execution.

Global Commands

After installation, the following commands are available globally (installed to /usr/local/bin):

Available Models

glm-5.2, glm-5, openpangu-2.0-flash, deepseek-r1-250528, deepseek-v3.2, DeepSeek-V3, deepseek-v3.1-terminus, glm-5.1

Security

1. API credentials: read from local settings.json and kernel keyring
2. API key decoding: handled internally, not exposed to user
3. Zero network calls during config retrieval: settings.json + keyring are local.
4. .env permissions 600: only the owner can read/write.

Script Tools