Deploy And Monitor

Phase 4: Deploy, Monitor and Compare

Deploy the validated config, watch the early trades, then compare live results against what the backtest said would happen. Output: a decision to scale, hold, reduce or stop.

Step 1 — Pre-deploy checklist

Confirm every item with the user:

• Winner confirmed — passed the backtesting go/no-go, config exists (manage_controllers(action="describe", config_name="..."))
• Exchange connectivity — connector configured, API keys set
• Leverage matches the backtest — never deploy at a different leverage than was simulated
• Position mode — HEDGE if the strategy goes both long and short: set_account_position_mode_and_leverage(...)
• Stops set — stop_loss and take_profit present; never deploy without them
• max_loss_quote set as a circuit breaker
• Sizing — ≤ 5% of account for one strategy, and start at 25–50% of the intended size; scale only after the comparison in Step 4 passes
• avg_trade_duration_hours noted — it sets the minimum monitoring window
• User is watching the first 3 trades

Step 2 — Deploy

manage_bots(
    action="deploy",
    bot_name="{strategy_slug}_live_v1",
    controllers_config=["{strategy_slug}_best"],
    account_name="master_account",
    max_global_drawdown_quote=<2 × stop_loss × total_amount>,
    max_controller_drawdown_quote=<1.5 × stop_loss × total_amount>,
)
manage_bots(action="status")   # no bot_name — returns all active bots

Record the deployment timestamp. It is the start of the live comparison window and cannot be recovered later.

For a single lightweight controller, an executor may fit better than a bot — delegate to the executor_manager agent.

Step 3 — Early monitoring

Cadence: every 30 min for the first 4 hours → every 2 hours for the next 24h → every 6–12 hours until the comparison window is reached.

manage_bots(action="status")
manage_bots(action="logs", bot_name="{strategy_slug}_live_v1", log_type="error")
list_executors(status="RUNNING")

What to check: is it running, is it trading, and does the trade rate match the backtest (backtest had N trades in M days → expect ~N/M per day).

Early warning signals:

• No trades after 2× the expected interval → the signal is not firing; suspect a column-name mismatch or a data feed issue
• Far more trades than backtest → signal flicker; consider a debounce
• Executor open longer than 2× avg_trade_duration_hours → check the exit logic
• Immediate large drawdown → stop and investigate before continuing

Abort immediately on: any unhandled exception in update_processed_data; drawdown exceeding max_controller_drawdown_quote within 5 trades; or a signal firing continuously with no exit (runaway position).

manage_bots(action="stop_bot", bot_name="{strategy_slug}_live_v1")

Step 4 — Live vs backtest comparison

Run once enough live exposure has accumulated: at least 2× the average trade duration, and enough trades to mean anything (aim for ≥ 10).

Re-run the backtest over the live window with the exact same config — do not change a single parameter. The question is what the backtest would have done in the same period.

manage_routines(
    action="run_async",
    name="backtest_chart",
    config={
        "config_name": "{strategy_slug}_best",
        "start_date": <live_deploy_date>, "end_date": <today>,
        "resolution": "1m", "trade_cost": 0.0006,
    },
)
# → read it back with manage_routines(action="get_instance", name=<instance_id>)

Live vs Backtest: {strategy_slug}_best | Jul 15 – Jul 30 (15d)
──────────────────────────────────────────────────────
Metric          Live      Backtest   Delta    Flag
Net PnL         +3.2%     +4.8%      -1.6pp   ✅
Trade Count     12        15         -20%     ✅
Win Rate        58.3%     53.3%      +5.0pp   ✅
Max Drawdown    -4.1%     -3.5%      +0.6pp   ✅
Sharpe          0.95      1.18       -0.23    ✅
──────────────────────────────────────────────────────
Verdict: ✅ CONSISTENT — continue live

Step 5 — Decision

✅ CONSISTENT (all deltas within thresholds) Scale to full intended size. Move to a daily monitoring cadence. Re-compare weekly for the first month, then monthly. If live DD is under 50% of backtest DD, consider tightening stops.

⚠️ MINOR DRIFT (1–2 metrics slightly over) Hold at current size — do not scale up. Extend the window by another 1× average trade duration and re-compare. Widening drift → escalate.

❌ MAJOR DRIFT (Sharpe delta > 0.5 or PnL delta > 50%) Reduce to minimum size or stop. Investigate in order: regime change (compare current ADX/volatility against the backtest period), execution slippage (fill vs intended price), data discrepancy (live vs historical candles for the same window), signal flicker. Then re-sweep parameters over the most recent 30 days via the backtesting playbook. If the re-sweep fails, the hypothesis is dead — back to research.

❌ CRITICAL (live DD > 2× backtest DD, or loss beyond user tolerance) Stop immediately with manage_bots(action="stop_bot", ...), close open positions, write a post-mortem. Do not redeploy without a full Phase 1–3 cycle on a new hypothesis.

Step 6 — Ongoing cadence

If Sharpe stays below 0.5 for two consecutive months, trigger a full research refresh. Log findings with manage_memory so the next strategy inherits them.

For automated daily snapshots, write a monitoring routine yourself — read the routine_cookbook playbook first, then create and test it.

Artifacts

1. Completed pre-deploy checklist
2. Deployment record — bot name, config, timestamp, initial size
3. Early monitoring log (first 48h)
4. Live performance snapshot
5. Backtest-over-live-period results
6. Comparison table with delta flags
7. Decision + action plan