Document Gen Resilient

Resilient Document Generation Workflow

When to Use

Use this skill when document generation tasks encounter errors or when you need reliable multi-format output:

• shell_agent returns unknown or unclear errors on document generation
• Generating documents in multiple formats (e.g., .docx, .pdf, .html)
• PDF generation fails due to LaTeX encoding or missing dependencies
• You need to handle special characters, symbols, or non-ASCII text safely
• Previous document generation attempts have failed

Core Technique

Instead of delegating the entire document generation to shell_agent, manually split the workflow into discrete, observable steps with built-in fallbacks:

1. Tool availability check → Verify pandoc and PDF engines are available
2. Content creation → Use write_file to create source document (Markdown)
3. Unicode assessment → Determine if sanitization is needed based on target format
4. Format conversion → Try primary method, fall back to alternatives on failure
5. Verification → Check output files exist and are valid

⚠️ Format-Specific Unicode Guidance

Critical: Different formats handle Unicode differently. Plan accordingly:

Step-by-Step Workflow

Step 0: Check Tool Availability

Before starting, verify which tools are available:

run_shell
command: which pandoc && echo "PANDOC: OK" || echo "PANDOC: MISSING"

run_shell
command: which pdflatex && echo "PDFLATEX: OK" || echo "PDFLATEX: MISSING"

run_shell
command: which xelatex && echo "XELATEX: OK" || echo "XELATEX: MISSING"

run_shell
command: python3 -c "import fpdf; print('FPDF2: OK')" 2>/dev/null || echo "FPDF2: MISSING"

Decision Tree Based on Availability:

• pandoc + xelatex available → Use pandoc with xelatex engine (best Unicode support)
• pandoc + pdflatex only → Use pandoc with sanitization (Step 2)
• pandoc missing, Python available → Use Python libraries (Step 3 Alternative)
• All missing → Install dependencies or use shell_agent with explicit instructions

Step 1: Create Source Content with write_file

Write your document content as Markdown to a temporary source file. This gives you full visibility into the content being generated.

write_file
path: /tmp/document_source.md
content: |
  # Document Title
  
  ## Section 1
  Content here...
  
  ## Section 2
  More content...

Step 2: Assess and Handle Unicode (Conditional)

Before PDF conversion, check if your content contains problematic characters:

run_shell
command: grep -P '[\x{2014}\x{2013}\x{201C}\x{201D}\x{2026}]' /tmp/document_source.md && echo "UNICODE_DETECTED" || echo "UNICODE_CLEAN"

If Unicode detected AND using pdflatex, create a sanitized version:

write_file
path: /tmp/document_source_sanitized.md
content: |
  # Document Title
  
  ## Section 1
  Content here... (with all special chars replaced per table below)

Common Problematic Characters:

Note: Keep the original unsanitized file for DOCX/HTML conversion (these formats handle Unicode better).

Step 3: Convert to Target Formats with run_shell

Use run_shell with explicit commands for each format. Try primary method first, fall back on failure.

For DOCX (from original, no sanitization needed):

run_shell
command: pandoc /tmp/document_source.md -o output.docx

For PDF (try in order):

Option A: xelatex (best Unicode support)

run_shell
command: pandoc /tmp/document_source.md -o output.pdf --pdf-engine=xelatex

Option B: wkhtmltopdf (good alternative)

run_shell
command: pandoc /tmp/document_source.md -o output.pdf --pdf-engine=wkhtmltopdf

Option C: pdflatex with sanitization

run_shell
command: pandoc /tmp/document_source_sanitized.md -o output.pdf

Option D: Python fpdf2 fallback

run_shell
command: python3 -c "
from fpdf import FPDF
pdf = FPDF()
pdf.add_page()
pdf.set_font('Arial', size=12)
with open('/tmp/document_source.md', 'r', encoding='utf-8') as f:
    content = f.read()
pdf.multi_cell(0, 10, content)
pdf.output('output.pdf')
"

For HTML (from original, no sanitization needed):

run_shell
command: pandoc /tmp/document_source.md -o output.html

Step 4: Verify Outputs

Check that files were created successfully:

run_shell
command: ls -lh output.docx output.pdf output.html 2>/dev/null

run_shell
command: file output.pdf 2>/dev/null

Complete Example

# Generate Negotiation Strategy Document

## Step 0: Check tools
run_shell
command: which pandoc && which xelatex && echo "TOOLS_OK" || echo "TOOLS_MISSING"

## Step 1: Write Markdown source
write_file
path: /tmp/negotiation_strategy.md
content: |
  # Negotiation Strategy
  
  ## Executive Summary
  [Content with original unicode...]
  
  ## Resolution Path
  [Content...]
  
  ## BATNA Analysis
  [Content...]

## Step 2: Check for Unicode (if PDF needed)
run_shell
command: grep -P '[\x{2014}\x{2013}\x{201C}\x{201D}]' /tmp/negotiation_strategy.md && echo "UNICODE_DETECTED" || echo "UNICODE_CLEAN"

## Step 3: Convert to DOCX (from original)
run_shell
command: pandoc /tmp/negotiation_strategy.md -o negotiation_strategy.docx

## Step 4: Convert to PDF (try xelatex first)
run_shell
command: pandoc /tmp/negotiation_strategy.md -o negotiation_strategy.pdf --pdf-engine=xelatex

## Step 5: If Step 4 failed, try wkhtmltopdf
run_shell
command: pandoc /tmp/negotiation_strategy.md -o negotiation_strategy.pdf --pdf-engine=wkhtmltopdf

## Step 6: Convert to HTML (from original)
run_shell
command: pandoc /tmp/negotiation_strategy.md -o negotiation_strategy.html

## Step 7: Verify
run_shell
command: ls -lh negotiation_strategy.*

Advantages Over shell_agent

Common pandoc Commands

# Markdown to Word
pandoc input.md -o output.docx

# Markdown to PDF (requires LaTeX or wkhtmltopdf)
pandoc input.md -o output.pdf

# Markdown to PDF with Unicode-safe engine (better Unicode support)
pandoc input.md -o output.pdf --pdf-engine=xelatex

# Markdown to PDF with wkhtmltopdf (good alternative)
pandoc input.md -o output.pdf --pdf-engine=wkhtmltopdf

# Markdown to HTML
pandoc input.md -o output.html

# With custom template
pandoc input.md --template=template.html -o output.html

# With metadata
pandoc input.md -o output.pdf --metadata title="Document Title"

Troubleshooting

PDF Generation Failures

• PDF generation fails with encoding error:

  • Use --pdf-engine=xelatex for better Unicode support
  • Or use --pdf-engine=wkhtmltopdf as alternative
  • Or create sanitized markdown file and use pdflatex

• PDF generation fails: LaTeX not found:

  • Install LaTeX: apt-get install texlive-latex-recommended texlive-fonts-recommended
  • Or use --pdf-engine=wkhtmltopdf instead
  • Or fall back to Python fpdf2 (Step 3 Option D)

• PDF generation fails: wkhtmltopdf not found:

  • Install: apt-get install wkhtmltopdf
  • Or use xelatex or pdflatex with sanitization
  • Or fall back to Python fpdf2

DOCX Formatting Issues

• Add --reference-doc=template.docx for custom styles
• Ensure pandoc version is 2.0+ for best DOCX support

Unicode/Encoding Errors in Any Format

• Add -f markdown+utf8 to pandoc command
• Ensure source file is UTF-8 encoded: file -i source.md
• For PDF: prefer xelatex engine over pdflatex

Special Characters Not Rendering in PDF

• Use xelatex engine: --pdf-engine=xelatex
• Or use the character replacement table above
• Or create sanitized version before PDF conversion

Missing pandoc

• Install via apt-get install pandoc or brew install pandoc
• Or use Python libraries directly (fpdf2, reportlab)

Python PDF Library Fallback

If pandoc is unavailable or consistently failing:

# Using fpdf2
python3 -c "
from fpdf import FPDF
pdf = FPDF()
pdf.add_page()
pdf.set_font('Arial', size=12)
pdf.multi_cell(0, 10, open('input.md').read())
pdf.output('output.pdf')
"

# Using reportlab (more control)
python3 -c "
from reportlab.lib.pagesizes import letter
from reportlab.platypus import SimpleDocTemplate, Paragraph
from reportlab.lib.styles import getSampleStyleSheet
doc = SimpleDocTemplate('output.pdf', pagesize=letter)
styles = getSampleStyleSheet()
story = [Paragraph(open('input.md').read(), styles['Normal'])]
doc.build(story)
"

Unicode Sanitization Script (Optional)

For repeated use, create a reusable sanitization script:

#!/bin/bash
# sanitize_for_pdf.sh - Replace problematic unicode chars for LaTeX/PDF
if [ -z "$1" ]; then
  echo "Usage: $0 <input.md> [output.md]"
  exit 1
fi
INPUT="$1"
OUTPUT="${2:-${1%.md}_sanitized.md}"

sed -e 's/—/--/g' \
    -e 's/–/-/g' \
    -e 's/"([^"]*)"/"\1"/g' \
    -e "s/'([^']*)/'\1'/g" \
    -e 's/…/.../g' \
    -e 's/→/->/g' \
    -e 's/←/<-/g' \
    -e 's/✓/[x]/g' \
    -e 's/✗/[ ]/g' \
    -e 's/©/(c)/g' \
    -e 's/®/(r)/g' \
    -e 's/™/(tm)/g' \
    "$INPUT" > "$OUTPUT"

echo "Sanitized: $INPUT -> $OUTPUT"

Save as sanitize_for_pdf.sh, make executable with chmod +x sanitize_for_pdf.sh, then use:

run_shell
command: ./sanitize_for_pdf.sh /tmp/document_source.md /tmp/document_source_sanitized.md

Decision Matrix: Which Approach to Use

When to Return to shell_agent

After successfully completing the manual workflow once, you can attempt shell_agent again for similar tasks, now with a known-working fallback if errors recur. For documents with heavy Unicode content requiring PDF output, consider always using the manual workflow with xelatex or sanitization.

Related Skills

• write-file-fallback-report: Use when web sourcing fails, create from embedded knowledge
• spreadsheet-direct-python: Use Python libraries directly for spreadsheet operations
• Use this skill when your documents contain special characters, symbols, or non-ASCII text that may cause LaTeX/PDF conversion issues