Document Gen Unicode Safe

Document Generation Fallback Workflow (Unicode-Safe)

When to Use

First, assess whether to delegate to shell_agent or use manual workflow:

✅ Use shell_agent Directly When:

• Document is straightforward (no special Unicode characters, symbols, or non-ASCII text)
• Single format output needed (e.g., just .docx)
• Content is primarily ASCII text with standard punctuation
• No complex formatting requirements (tables, equations, custom templates)
• You want quick iteration and shell_agent has succeeded on similar tasks before

⚠️ Use Manual Workflow When:

• shell_agent returns unknown or unclear errors
• Document contains special characters, symbols, or non-ASCII text (see Unicode table below)
• Generating multiple formats simultaneously (e.g., .docx, .pdf, .html)
• PDF generation fails due to LaTeX encoding issues
• You need fine-grained control over each conversion step
• Previous shell_agent attempts failed on similar content

📋 Decision Checklist

1. Does the document contain: em-dashes (—), curly quotes (" "), arrows (→), 
   checkmarks (✓), or other special symbols? → Use Manual Workflow

2. Is non-ASCII text present (é, ñ, ü, 中文，العربية)? → Use Manual Workflow with sanitization

3. Did shell_agent already fail on this or similar content? → Use Manual Workflow

4. Need multiple output formats with guaranteed success? → Use Manual Workflow

5. Simple ASCII document, single format, first attempt? → Try shell_agent First

Core Technique

Quick Path (for straightforward documents): Delegate directly to shell_agent with clear instructions:

shell_agent
task: Create a Word document from markdown content. Write the markdown to 
      /tmp/document.md, then convert to .docx using pandoc, and verify the output exists.

Manual Path (for complex/Unicode-heavy documents): Split the workflow into discrete, observable steps:

1. Content creation → Use write_file to create source document (Markdown)
2. Unicode sanitization → Preprocess markdown to replace problematic characters before PDF conversion
3. Format conversion → Use run_shell with pandoc for each target format
4. Verification → Check output files exist and are valid

Why This Adaptive Approach?

1. Content creation → Use write_file to create source document (Markdown)
2. Unicode sanitization → Preprocess markdown to replace problematic characters before PDF conversion
3. Format conversion → Use run_shell with pandoc for each target format
4. Verification → Check output files exist and are valid

⚠️ Unicode & LaTeX Compatibility Warning

Critical: PDF generation via pandoc typically uses LaTeX (pdflatex or xelatex), which has limited Unicode support. Common problematic characters include:

Step-by-Step Workflow

Step 1: Create Source Content with write_file

Write your document content as Markdown to a temporary source file. This gives you full visibility into the content being generated.

write_file
path: /tmp/document_source.md
content: |
  # Document Title
  
  ## Section 1
  Content here...
  
  ## Section 2
  More content...

Step 2: Sanitize Unicode Characters (Pre-PDF Conversion)

Before PDF conversion, create a sanitized version of your markdown with LaTeX-safe characters:

write_file
path: /tmp/document_source_sanitized.md
content: |
  # Document Title
  
  ## Section 1
  Content here... (with all special chars replaced per table above)

Alternative: Use a shell script to sanitize:

run_shell
command: sed -e 's/—/--/g' -e 's/–/-/g' -e 's/"([^"]*)"/"\1"/g' -e 's/'([^']*)/'\1'/g' /tmp/document_source.md > /tmp/document_source_sanitized.md

Note: Keep the original unsanitized file for DOCX/HTML conversion (these formats handle Unicode better).

Step 3: Convert to Target Formats with run_shell

Use run_shell with explicit pandoc commands for each format. Use sanitized source for PDF, original for other formats.

run_shell
command: pandoc /tmp/document_source.md -o output.docx

run_shell
command: pandoc /tmp/document_source_sanitized.md -o output.pdf

run_shell
command: pandoc /tmp/document_source.md -o output.html

Step 4: Verify Outputs

Check that files were created successfully:

run_shell
command: ls -lh output.docx output.pdf output.html

Complete Example

Quick Path Example (Simple Document)

# Generate Simple Meeting Notes

## Delegate to shell_agent
shell_agent
task: |
  Create meeting notes document:
  1. Write to /tmp/meeting_notes.md with content:
     "# Team Meeting Notes
     
     ## Date: 2024-01-15
     ## Attendees: Alice, Bob, Carol
     
     ## Action Items
     - Alice: Complete report by Friday
     - Bob: Schedule follow-up meeting
     
     ## Next Meeting: 2024-01-22"
  2. Convert to Word: pandoc /tmp/meeting_notes.md -o meeting_notes.docx
  3. Verify: ls -lh meeting_notes.docx

Manual Path Example (Unicode-Heavy Document)

# Generate Negotiation Strategy Document

## Step 1: Write Markdown source
write_file
path: /tmp/negotiation_strategy.md
content: |
  # Negotiation Strategy
  
  ## Executive Summary
  [Content with original unicode...]
  
  ## Resolution Path
  [Content...]
  
  ## BATNA Analysis
  [Content...]

## Step 2: Create sanitized version for PDF
write_file
path: /tmp/negotiation_strategy_sanitized.md
content: |
  # Negotiation Strategy
  
  ## Executive Summary
  [Content with unicode replaced: em-dash -> --, curly quotes -> straight, etc.]
  
  ## Resolution Path
  [Content...]
  
  ## BATNA Analysis
  [Content...]

## Step 3: Convert to DOCX (from original)
run_shell
command: pandoc /tmp/negotiation_strategy.md -o negotiation_strategy.docx

## Step 4: Convert to PDF (from sanitized)
run_shell
command: pandoc /tmp/negotiation_strategy_sanitized.md -o negotiation_strategy.pdf

## Step 5: Convert to HTML (from original)
run_shell
command: pandoc /tmp/negotiation_strategy.md -o negotiation_strategy.html

## Step 6: Verify
run_shell
command: ls -lh negotiation_strategy.*

Advantages Over shell_agent

Common pandoc Commands

# Markdown to Word
pandoc input.md -o output.docx

# Markdown to PDF (requires LaTeX or wkhtmltopdf)
pandoc input.md -o output.pdf

# Markdown to PDF with Unicode-safe engine (better Unicode support)
pandoc input.md -o output.pdf --pdf-engine=xelatex

# Markdown to HTML
pandoc input.md -o output.html

# With custom template
pandoc input.md --template=template.html -o output.html

# With metadata
pandoc input.md -o output.pdf --metadata title="Document Title"

Troubleshooting

• PDF generation fails with encoding error:

  • Use the sanitized markdown file (Step 2)
  • Or try --pdf-engine=xelatex for better Unicode support
  • Or use --pdf-engine=wkhtmltopdf as alternative

• PDF generation fails: LaTeX not found:

  • Install LaTeX: apt-get install texlive-latex-recommended texlive-fonts-recommended
  • Or use --pdf-engine=wkhtmltopdf instead

• DOCX formatting issues: Add --reference-doc=template.docx for custom styles

• Unicode/encoding errors in any format:

  • Add -f markdown+utf8 to pandoc command
  • Ensure source file is UTF-8 encoded: file -i source.md

• Special characters not rendering in PDF:

  • Use the character replacement table above
  • Create sanitized version before PDF conversion

• Missing pandoc: Install via apt-get install pandoc or brew install pandoc

Unicode Sanitization Script (Optional)

For repeated use, create a reusable sanitization script:

#!/bin/bash
# sanitize_for_pdf.sh - Replace problematic unicode chars for LaTeX/PDF
if [ -z "$1" ]; then
  echo "Usage: $0 <input.md> [output.md]"
  exit 1
fi
INPUT="$1"
OUTPUT="${2:-${1%.md}_sanitized.md}"

sed -e 's/—/--/g' \
    -e 's/–/-/g' \
    -e 's/"([^"]*)"/"\1"/g' \
    -e 's/'([^']*)/'\1'/g' \
    -e 's/…/.../g' \
    -e 's/→/->/g' \
    -e 's/←/<-/g' \
    -e 's/✓/[x]/g' \
    -e 's/✗/[ ]/g' \
    -e 's/©/(c)/g' \
    -e 's/®/(r)/g' \
    -e 's/™/(tm)/g' \
    "$INPUT" > "$OUTPUT"

echo "Sanitized: $INPUT -> $OUTPUT"

Save as sanitize_for_pdf.sh, make executable with chmod +x sanitize_for_pdf.sh, then use:

run_shell
command: ./sanitize_for_pdf.sh /tmp/document_source.md /tmp/document_source_sanitized.md

When to Return to shell_agent

After successful shell_agent completion: Continue using shell_agent for similar straightforward documents.

After shell_agent failure on Unicode content: Switch to manual workflow for that document and similar future documents. Document the failure pattern.

After successful manual workflow: You now have a proven approach. For future similar documents:

• If content is similar (same Unicode patterns): Use manual workflow directly
• If content is simpler: Try shell_agent first, keep manual workflow as backup
• Build a library of sanitized templates for repeated use

Related Skills

• document-gen-fallback: Original fallback workflow without Unicode guidance
• Use this skill as your primary document generation skill—it adapts to document complexity
• Fall back to document-gen-unicode-safe (parent) if you need the original prescriptive manual-only approach name: document-gen-adaptive-workflow description: Adaptive document generation with smart fallback to manual Unicode-safe workflow

Quick Path: Delegate to shell_agent

For straightforward documents without Unicode concerns:

shell_agent
task: |
  1. Write markdown content to /tmp/report.md using write_file
  2. Convert to Word format: pandoc /tmp/report.md -o report.docx
  3. Convert to PDF: pandoc /tmp/report.md -o report.pdf --pdf-engine=xelatex
  4. Verify both files exist with: ls -lh report.docx report.pdf
  5. Report the file sizes and confirm successful generation

If shell_agent succeeds: Task complete.

If shell_agent fails: Switch to Manual Path below.

Manual Path: Step-by-Step Workflow