Mariadb Syntax Check Constraints

MariaDB CHECK Constraints

Deterministic guide for declaring, naming, dropping, and reasoning about CHECK constraints in MariaDB. CHECK constraints are enforced (not parsed-and-ignored) since MariaDB 10.2.1, which precedes MySQL 8 by several years. This skill applies to 10.6-LTS, 10.11-LTS, 11.x, and 12.x.

Quick Reference

ALWAYS remember the following invariants:

• CHECK passes when the predicate evaluates to NULL. SQL three-valued logic (3VL) treats NULL as "unknown", and a CHECK only fails when the predicate is explicitly FALSE. A nullable column col INT CHECK (col > 0) will accept NULL. Combine with NOT NULL to require a value AND a positive value.
• CHECK constraints are enforced since MariaDB 10.2.1. Earlier versions parsed CHECK syntax but ignored it. MariaDB's enforcement predates MySQL 8.0 (released July 2018) by approximately 18 months.
• Use CHECK (JSON_VALID(col)) to validate JSON columns. MariaDB's JSON type is a LONGTEXT alias, not native binary; without JSON_VALID you can insert literal garbage and break every downstream JSON_EXTRACT. (See L-005 / D-010.) From 10.4.3+, the JSON alias auto-applies JSON_VALID as a CHECK, but explicit CHECK (JSON_VALID(col)) is required on LONGTEXT/TEXT columns used as JSON and recommended in all migration scripts.
• INSERT IGNORE turns CHECK violation into a warning. The row is not inserted, but no error is raised. Use plain INSERT when you need hard rejection.
• Prefer CHECK over triggers for pure invariants. CHECK is set-based, declarative, faster, and visible in information_schema.CHECK_CONSTRAINTS. Use triggers only when you need side-effects (audit row, modify other tables, derived columns) or cross-table validation.
• Cross-table or sub-query CHECK is not allowed. A CHECK predicate may only reference columns of the same row. Use a BEFORE INSERT/BEFORE UPDATE trigger with a SIGNAL if you must validate against another table.
• Disable globally with SET SESSION check_constraint_checks = OFF for bulk-load of legacy data, then re-enable. Disabled checks do not re-validate existing rows on re-enable.
• auto_increment columns may not appear in a CHECK constraint (per mariadb.com/kb/en/constraint/).
• Only deterministic functions are permitted in CHECK expressions. NOW(), RAND(), UUID(), CURRENT_TIMESTAMP ARE non-deterministic and MUST NOT appear in CHECK.

Decision Tree : CHECK vs NOT NULL vs Trigger vs App-Layer

Need to enforce an invariant on a column?
|
+-- Just "value must be present"
|   --> Use NOT NULL. Do not add CHECK (col IS NOT NULL).
|
+-- Single-row predicate on one or more columns of THIS row
|   |
|   +-- Predicate is a deterministic expression (range, regex via REGEXP, enum-like IN-list, JSON_VALID)
|   |   --> Use CHECK.
|   |
|   +-- Predicate calls NOW(), UUID(), or any non-deterministic function
|       --> Use BEFORE INSERT/UPDATE trigger.
|
+-- Predicate must look up another table or aggregate
|   --> Use BEFORE INSERT/UPDATE trigger with SIGNAL SQLSTATE '45000'.
|       (CHECK cannot reference other tables.)
|
+-- Predicate involves business workflow (state machine, "manager must approve")
    --> Validate in application layer or stored procedure.
        CHECK is for data invariants, not workflow.

Decision Tree : CHECK Alone vs CHECK + NOT NULL

Should the column allow NULL?
|
+-- Yes, NULL is a valid "value-unknown" sentinel
|   --> CHECK (col > 0)           -- NULL passes, positive numbers pass.
|
+-- No, the column must always have a value AND satisfy the predicate
    --> col INT NOT NULL CHECK (col > 0)
        -- Now NULL is rejected by NOT NULL, negative/zero by CHECK.

This is the single most common mistake. ALWAYS pair NOT NULL with CHECK if the column is required.

Core Grammar

Column-level CHECK

-- 10.2.1+
CREATE TABLE accounts (
  id      INT PRIMARY KEY,
  balance DECIMAL(12,2) NOT NULL CHECK (balance >= 0)
);

The CHECK clause appears inline in the column definition. Auto-generated constraint name is of the form CONSTRAINT_1, CONSTRAINT_2, ... You CANNOT reference an auto-generated name reliably across DDL replays. ALWAYS name CHECK constraints explicitly when you anticipate later DROP CONSTRAINT.

Table-level CHECK with explicit name

-- 10.2.1+
CREATE TABLE orders (
  id         INT PRIMARY KEY,
  ordered_at DATETIME NOT NULL,
  shipped_at DATETIME,
  CONSTRAINT ship_after_order CHECK (shipped_at IS NULL OR shipped_at >= ordered_at)
);

Table-level CHECK can reference multiple columns of the same row. Naming the constraint (CONSTRAINT ship_after_order) makes it droppable, queryable in information_schema.CHECK_CONSTRAINTS, and identifiable in error output.

ADD CHECK to an existing table

-- 10.2.1+
ALTER TABLE accounts
  ADD CONSTRAINT balance_non_negative CHECK (balance >= 0);

ALTER TABLE evaluates the new CHECK against every existing row. If any existing row fails the predicate, the ALTER fails. Use SET SESSION check_constraint_checks = OFF; only when you have audited the existing data and accept the inconsistency; the disabled state does not re-validate later.

DROP a CHECK constraint

-- 10.2.1+
ALTER TABLE accounts DROP CONSTRAINT balance_non_negative;

Find auto-generated names via:

SELECT CONSTRAINT_NAME, CHECK_CLAUSE
  FROM information_schema.CHECK_CONSTRAINTS
 WHERE TABLE_SCHEMA = DATABASE() AND TABLE_NAME = 'accounts';

CHECK and JSON

MariaDB JSON is a LONGTEXT alias, not a native binary type. WITHOUT a CHECK (JSON_VALID(col)), any string can be inserted, and JSON_EXTRACT will silently misbehave. (See D-010.)

-- 10.2.1+ (CHECK enforcement)
-- 10.4.3+ adds auto-CHECK on the JSON alias type, but explicit is safer
CREATE TABLE events (
  id      INT PRIMARY KEY,
  payload LONGTEXT NOT NULL CHECK (JSON_VALID(payload))
);

Note: JSON_VALID(NULL) returns NULL, which passes CHECK. If payload is nullable, malformed JSON is rejected but NULL is accepted. Use NOT NULL together with CHECK (JSON_VALID(payload)) for "must be present AND valid JSON".

CHECK and INSERT IGNORE

INSERT IGNORE INTO accounts (id, balance) VALUES (1, -50);
-- Row is NOT inserted; a warning is produced; no error is raised.
SHOW WARNINGS;
-- Warning | 4025 | CONSTRAINT `accounts.balance_non_negative` failed for `db`.`accounts`

ALWAYS use plain INSERT (not INSERT IGNORE) when you require hard failure on a CHECK violation. REPLACE INTO and INSERT ... ON DUPLICATE KEY UPDATE raise the violation as a regular error, not a warning.

CHECK and Generated Columns

CHECK constraints on VIRTUAL generated columns are evaluated whenever the generated expression is evaluated (i.e. on row read for VIRTUAL, on row write for PERSISTENT/STORED). CHECK on a PERSISTENT generated column is evaluated on INSERT/UPDATE only and NEVER re-validates existing data when the underlying column changes through ALTER.

-- 10.2+
CREATE TABLE orders (
  id        INT PRIMARY KEY,
  qty       INT NOT NULL,
  unit_cost DECIMAL(10,2) NOT NULL,
  total     DECIMAL(12,2) AS (qty * unit_cost) PERSISTENT,
  CONSTRAINT total_positive CHECK (total > 0)
);

Performance

CHECK constraints are evaluated once per INSERT and once per UPDATE that touches any column referenced in the predicate. Cost is proportional to predicate complexity:

• Simple comparisons (col > 0, col IN ('a','b','c')) are essentially free.
• Function calls (JSON_VALID, REGEXP) add measurable per-row cost on bulk inserts.
• Multi-column predicates do not require additional storage; they are stateless expressions.

NEVER replace a simple CHECK with a trigger "for performance." A CHECK is faster than the equivalent BEFORE trigger because the trigger requires a row-trigger context and SIGNAL handling, while CHECK is evaluated inline by the optimizer.

Diff From MySQL 8

When migrating MySQL 8 -> MariaDB:

• All CHECK clauses are preserved syntactically.
• JSON columns lose native binary storage; ADD CHECK (JSON_VALID(col)) to every JSON column to preserve the MySQL invariant. (See L-005.)
• NOT ENFORCED clause from MySQL is parsed but treated as ENFORCED in MariaDB. Audit migration scripts for NOT ENFORCED usage.

Restrictions (Hard Rules)

NEVER include any of the following in a CHECK expression:

1. Sub-queries. CHECK (id IN (SELECT id FROM other)) is rejected.
2. References to columns of other tables. CHECK predicates are row-local only.
3. Non-deterministic functions. NOW(), CURRENT_TIMESTAMP, RAND(), UUID(), CONNECTION_ID(), USER(), CURRENT_USER(), LAST_INSERT_ID() are all forbidden. Use a BEFORE INSERT/UPDATE trigger instead.
4. Stored procedure or function calls that are not deterministic. User-defined functions must be declared DETERMINISTIC to be permitted.
5. auto_increment columns. Per the KB constraint page, "auto_increment columns are not permitted in check constraints."
6. Variables. Session and user variables (@var, @@session.*) cannot be referenced.

Disabling CHECK Globally (Bulk Load Only)

-- 10.2+
SET SESSION check_constraint_checks = OFF;
LOAD DATA INFILE '/tmp/legacy-dump.csv' INTO TABLE accounts ...;
SET SESSION check_constraint_checks = ON;

WARNING: re-enabling does NOT re-validate existing rows. Audit the bulk-loaded data manually:

SELECT * FROM accounts WHERE balance < 0;

Common Errors

See references/anti-patterns.md for full reproductions.

Cross-References

• mariadb-syntax-json : JSON storage as LONGTEXT, why CHECK (JSON_VALID(col)) is mandatory.
• mariadb-syntax-sql-ddl : full DDL grammar, ALTER TABLE patterns.
• mariadb-impl-schema-design : when to choose CHECK vs trigger vs application validation.
• mariadb-impl-migration-mysql-to-mariadb : adding CHECK (JSON_VALID(col)) during migration.
• mariadb-errors-data-integrity : decoding CONSTRAINT ... failed and recovery patterns.

References

• references/methods.md : complete CHECK grammar, NULL semantics tables, MySQL 8 comparison, sql_mode interactions.
• references/examples.md : 10+ working CHECK constraint patterns with version annotations.
• references/anti-patterns.md : 7 real anti-patterns with reproductions and corrections.

Sources

• MariaDB KB : Constraint reference, https://mariadb.com/kb/en/constraint/ (verified 2026-05-19)
• MariaDB KB : ALTER TABLE, https://mariadb.com/kb/en/alter-table/ (verified 2026-05-19)
• MariaDB KB : JSON_VALID, https://mariadb.com/kb/en/json_valid/ (verified 2026-05-19)
• MariaDB KB : INSERT IGNORE, https://mariadb.com/kb/en/insert-ignore/ (verified 2026-05-19)
• Vooronderzoek : docs/research/vooronderzoek-mariadb.md lines 236, 799 (consolidated sub-topic).