Security Microsegmentation

Microsegmentation

Isolate every workload behind its own perimeter -- so compromising the web server does not hand the attacker the database, the secrets store, and the internal APIs

When to Use

• Designing network architecture for a microservices system
• Implementing zero trust networking within a data center or cloud VPC
• Reducing blast radius after a service compromise
• Configuring Kubernetes NetworkPolicies or cloud security groups
• Auditing east-west traffic (service-to-service) for unauthorized communication
• Preparing for compliance frameworks that require network segmentation (PCI-DSS, HIPAA)

Threat Context

Traditional perimeter security (firewall at the edge, flat network inside) fails catastrophically when the perimeter is breached. The 2013 Target breach started with compromised HVAC vendor credentials and used the flat internal network to reach the POS systems -- lateral movement across 40 million credit cards. The 2017 Equifax breach exploited a single web application vulnerability and pivoted through unsegmented internal systems to access 147 million records. The 2020 SolarWinds attack demonstrated lateral movement at national scale: once inside the perimeter, the attacker moved freely between systems for months. Microsegmentation limits blast radius: if the web server is compromised, it can only reach the services it was explicitly allowed to communicate with. Everything else is unreachable.

Instructions

1. Map all service-to-service communication flows. Before writing a single firewall rule, document which services talk to which services, on which ports, using which protocols. This is your baseline. Any communication not in this map should be denied by default. Use network flow logs, service mesh telemetry, or traffic analysis tools to discover actual traffic patterns. In AWS, VPC Flow Logs capture every packet accepted or rejected by security groups. In Kubernetes, Cilium's Hubble provides real-time visibility into all network flows with identity context.

2. Apply default-deny network policies. Start with "deny all ingress and egress" for every workload. Then add explicit allow rules for each documented communication flow. In Kubernetes: create a NetworkPolicy with policyTypes: [Ingress, Egress] and empty rules (deny-all), then add specific allow rules per service. In cloud: use security groups with deny-all and explicit allow rules. The default in most Kubernetes clusters and cloud VPCs is allow-all -- this must be explicitly corrected as the first step.

3. Segment by trust level, not just by service. Group services into trust zones: public-facing (web servers, API gateways), application logic (business services), data stores (databases, caches), management (monitoring, logging, CI/CD). Apply stricter rules at zone boundaries. Data stores should only accept connections from application logic, never from public-facing services directly. Management systems should be in an isolated zone accessible only from specific bastion hosts or jump servers.

4. Use service identity, not IP addresses. IP-based rules are fragile in dynamic environments (containers, autoscaling, spot instances). Use service identity (mTLS certificates, SPIFFE IDs, Kubernetes service accounts) to define policies. Service mesh (Istio, Linkerd, Cilium) provides identity-based policy enforcement. When a pod restarts with a new IP, identity-based policies continue to work because they reference the service account, not the ephemeral IP.

5. Enforce application-layer segmentation. Network segmentation (L3/L4) blocks unauthorized IP/port combinations but does not prevent an authorized connection from sending malicious requests. Add L7 policies: only allow specific HTTP methods and paths between services. For example, the order service can call GET /api/inventory and POST /api/inventory/reserve on the inventory service, but cannot call DELETE /api/inventory/*. Service mesh authorization policies (Istio AuthorizationPolicy, Cilium L7 policies) enable this granularity.

6. Monitor and alert on policy violations. Log denied connections. Alert on unexpected communication patterns. A sudden spike in denied traffic between two services may indicate a compromised service attempting lateral movement. Review flow logs periodically to discover new communication patterns that need policy updates. In production, treat any unexpected denied connection as a potential indicator of compromise until proven otherwise.

Details

Microsegmentation vs Traditional VLANs

VLANs segment at the network layer but every host within a VLAN can communicate freely. Microsegmentation applies per-workload policies, so two containers on the same host can be in different segments. VLANs are insufficient for containerized and cloud-native environments where workload density is high and IP addresses are ephemeral. A single Kubernetes node may run 50 pods from 20 different services -- VLAN-level segmentation treats them all as one trust zone.

Implementation Technologies

For Kubernetes, Cilium provides the richest policy model. For cloud-native without Kubernetes, use the cloud provider's security groups with cross-referencing (security group A allows traffic from security group B, not from IP ranges).

PCI-DSS Segmentation Requirements

PCI-DSS requires that the Cardholder Data Environment (CDE) is segmented from all other systems. Microsegmentation implements this by: placing CDE components in a dedicated segment, allowing only authorized services to communicate with the CDE, logging all CDE traffic, and testing segmentation controls annually. Penetration testers must verify that non-CDE systems cannot reach CDE systems, and this verification must be documented.

Blast Radius Analysis

For each service, enumerate what an attacker with full control of that service can reach. If compromising the web server gives access to the database, the secrets store, and the CI/CD system, the blast radius is the entire system. After segmentation, the web server should only reach the API gateway and the application services -- the database and secrets store are unreachable. Perform blast radius analysis quarterly and after any significant architecture change. Document the analysis: "If service X is compromised, the attacker can reach services Y and Z, which contain data classifications A and B."

Migration Strategy for Existing Systems

Retrofitting segmentation onto a flat network is high-risk if done incorrectly. The recommended approach: (1) deploy monitoring first -- enable flow logs and observe all traffic for 2-4 weeks without enforcing any policy, (2) generate a baseline communication map from observed traffic, (3) create policies that match the observed baseline (this should change nothing), (4) enable enforcement in audit/log-only mode, (5) verify no legitimate traffic is being flagged, (6) switch to enforcing mode, (7) incrementally tighten policies by removing overly broad rules. Never go from flat network to strict segmentation in one step -- the result is always a production outage.

Anti-Patterns

1. Flat network with no internal segmentation. All services can reach all other services. Compromising any single service grants access to the entire system. This is the default in most cloud VPCs and Kubernetes clusters and must be explicitly corrected.

2. Overly permissive allow rules. Rules like "allow all traffic from the application subnet to the data subnet" defeat the purpose of segmentation. Be specific: allow service-A to reach database-B on port 5432 using TCP. Every rule should name specific source and destination identities, not broad CIDR ranges.

3. Segmentation without monitoring. Policies without monitoring are unverifiable. If you cannot see what traffic is flowing and what is being denied, you cannot know if the segmentation is effective or if rules have drifted. Enable flow logs, review them, and alert on anomalies.

4. IP-based policies in dynamic environments. Kubernetes pods get new IPs on every restart. Security group rules referencing specific IPs become stale immediately. Use service identity and label selectors instead. If you find yourself updating firewall rules every time a pod restarts, your segmentation model is fundamentally wrong.

5. Segmentation only at the network layer. L3/L4 policies prevent unauthorized connections but do not prevent authorized connections from being misused. A compromised order service with L4 access to the payment service can send arbitrary requests. Add L7 policies for sensitive services: only allow specific HTTP methods and paths, reject everything else.