Stepped Demo Script

Stepped Demo Script

Compose a single bash file that a human can paste into their terminal and walk through, one step at a time, and see at each step (a) what the script is doing, (b) the command's output, and (c) whether the outcome matched expectations. The reader is often not the author – could be a teammate, a stakeholder, a support engineer on the other side of a ticket – so the script needs to be self-contained, legible without context, and not terrifying to open.

The goal is authoring velocity: the user starts most of these from a blank page, and the skill's job is to get them past the blank page with the right bones in place, not to dictate the body.

When this applies

Trigger when the user wants a runnable script that demonstrates a process by calling out each step and pausing for the reader. Common shapes:

• API sequence – a series of cURL calls showing a flow (e.g. auth → create → fetch → verify), often to reproduce a customer-ticket scenario or show off correct vs. broken behavior.
• CLI walkthrough – a series of commands in a shell or tool (git, kubectl, a CLI the user is learning or teaching).
• Mixed – any sequence where each step is one or two commands whose output the human should look at before moving on.

Skip when the script shouldn't pause (CI, cron, piped-to-file), when there's no stepping (a single long command), or when the "demo" is really a tutorial document (that's Markdown, not bash).

The authoring flow

1. Elicit the scenario if it's not already clear from the conversation. You need: what's being demonstrated, in roughly what steps, and whether any of it is misbehavior (so expect can surface the mismatch). Don't over-interview – a one-line scenario plus a list of steps is enough to draft.
2. Pick the closest example from examples/ to seed the structure (API sequence or CLI walkthrough). Read the full example before drafting – the shape matters more than any one line.
3. Start from templates/minimal.sh for new scripts, or extend the chosen example if its shape matches. Never compose a demo script from scratch without the prelude – the constants and helpers in the prelude are the whole point of the skill.
4. Compose the body from the alphabet in references/primitives.md: announce, section, expect, pause, plus the _jq/$c/$x constants. Each step is roughly announce "what I'm about to do" → <command> → pause, with an expect line afterward if there's an outcome to assert.
5. Wrap repeated calls in a shell function, not with a new primitive. If the same cURL shows up twice, lift it into a local function (see examples/api-sequence.sh). Functions wrap the command + its announce, not the pause – pauses stay at the call site so step granularity is controlled by the caller.
6. Read the draft back with fresh eyes. The test is whether a reader who's never seen the context can paste the file into their terminal and follow along. If a step's purpose isn't obvious from the announce line, fix the announce, not the code.
7. Write the script to disk, defaulting to /tmp/<scenario-slug>.sh. Use the active client's file-writing capability. The chat answer is a one-line handoff pointing at the file path -- not the script itself in a fenced block. Two reasons: (a) inlining the script in chat gives the user an unnecessary copy-paste-and-save step before they can run it; (b) writing to a relative path (e.g. ./demo.sh, squash-demo.sh) pollutes whatever directory the user invoked the skill from -- they may be inside a repo, and the demo doesn't belong there. Default to /tmp/<scenario-slug>.sh; pick a different absolute path only if the user names one. The user-facing chat answer should be ~1-2 sentences pointing at the file (e.g. "Script is at /tmp/find-delete-demo.sh -- run it with bash /tmp/find-delete-demo.sh. Each step pauses for Enter.").

The prelude

Every script starts with the same block. It's ~15 lines – don't trim it, don't "modernize" it, don't swap it for sourcing a helper. A self-contained script means the reader never has to chase a dependency.

#!/bin/bash
# --- Demo prelude ----------------------------------------------------
command -v jq >/dev/null 2>&1 && _jq() { jq ${NO_COLOR:+-M} "$@"; } || _jq() { cat; }
c=$'\342\234\205'  # ✅ check
x=$'\342\235\214'  # ❌ cross
if [[ -z "$NO_COLOR" && -t 1 ]]; then
    DIM=$'\033[2m'; BOLD=$'\033[1m'; RESET=$'\033[0m'
else
    DIM=''; BOLD=''; RESET=''
fi
announce() { printf '%s- %s%s\n' "$BOLD" "$*" "$RESET"; }
section()  { printf '\n%s== %s ==%s\n' "$BOLD" "$*" "$RESET"; }
expect()   {
    local e="$1" a="${2-$1}"
    if [[ "$e" == "$a" ]]; then
        printf '%s> expected: %s %s%s\n' "$DIM" "$e" "$c" "$RESET"
    else
        printf '%s> expected: %s %s actual: %s%s\n' "$DIM" "$e" "$x" "$a" "$RESET"
    fi
}
pause() {
    [[ -n "$DEMO_NO_PAUSE" || ! -t 0 ]] && return
    read -rp "<Enter to continue...>" && printf '\033[A\033[2K\n'
}
# ---------------------------------------------------------------------

Why each piece is there – you'll want to understand these so you can answer questions and handle edge cases:

• _jq falls back to cat when jq isn't installed. JSON responses stay readable either way – no setup instructions needed before running.
• $c / $x are octal escapes for ✅ / ❌. Octal rather than the literal glyph so the script is safe to paste through terminals/editors that mangle non-ASCII. expect uses them automatically; expose them directly for hand-rolled lines (mixed-result summaries, rare cases).
• Color guards (NO_COLOR, -t 1) mean the script outputs clean text when piped to a file or when the reader opts out. Respecting NO_COLOR is a widely-followed convention and costs one line of setup.
• announce is the narrator line before a command runs. Bold so it stands out against output.
• section breaks phases of a demo apart – use it when the script has more than one logical act (e.g. "first as an anonymous user", "now as an authenticated user"). Not every script needs one.
• expect is polymorphic: one arg means "the demo is showing correct behavior" (expected: X ✅); two args means "expected vs. actual differ" (expected: X ❌ actual: Y). Don't codify a third "I don't know what's correct" mode – if the author isn't confident enough to state what's expected, the demo isn't ready.
• pause respects DEMO_NO_PAUSE=1 for non-interactive runs and auto-skips when stdin isn't a terminal (piping into bash, CI). The \033[A\033[2K\n sequence moves the cursor up one line and clears it, so the <Enter to continue...> prompt doesn't leave a trail in the scrollback.

Composing the body

Each step is almost always one of three shapes:

Simple step (most common):

announce "Create a basket for cookieId $cookieId"
curl -s -X POST ... | _jq
pause

Step with an assertion (demo asserts the outcome):

announce "Fetch recommendations"
get_recs
expect "3 results including pinned item"
pause

Step demonstrating misbehavior (the whole point of the repro):

announce "Request with the malformed header"
curl -s ... | _jq
expect "400 bad_request" "500 internal_error"
pause

A reusable call lifts into a shell function that includes its own announce:

get_recs() {
    announce "GET /recommendations for cookieId $cookieId"
    curl -s ... | _jq
}
get_recs
expect "3 results"
pause

Note the pause stays outside the function. This is intentional: the caller owns when the reader gets to read the output, because the same function might be called in a phase where a pause is wanted and another where it isn't.

Things not to do

• Don't add a primitive for every shape that appears once. The alphabet is five functions on purpose. An info helper for one-off context lines, a warn helper for caveats, a summary helper for the last line – each of these is a bare echo or printf and shouldn't earn a slot. Bloating the prelude makes the reader trace more code before they can read the demo.
• Don't sweat color for output. announce and expect color themselves because they're narrator lines competing with command output. The command output itself (curl | _jq, CLI tool output) stays in its default colors – don't wrap it in $DIM or similar.
• Don't mock hostile environments in the prelude. If the user's demo genuinely needs to run without bash v4 features, or on BusyBox, or under set -u, call that out to the user – the prelude assumes plain bash on a reasonable-enough system (macOS/Linux defaults) and adding portability shims inflates it fast.
• Don't chain all the steps inside a big function. Top-level sequential statements are the right shape for a demo. A reader scrolls top-to-bottom and sees the flow. Wrapping everything in main() adds a call site the reader has to find.
• Don't add error handling that changes step semantics. A failing cURL is often the point – set -e would mask that. Let each step run and let the reader judge. If a step genuinely must succeed before the next makes sense, the user can inline a check (|| { echo "..."; exit 1; }) and the skill shouldn't pre-emptively wire it in.

Bundled resources

• templates/minimal.sh – copy-paste starting point. Prelude + one step + done. Use this when there's no closer example.
• examples/api-sequence.sh – unauthenticated GitHub API walkthrough. Demonstrates: announce/expect/pause in a cURL flow, lifting a repeated call into a function, using section to split phases, misbehavior mode via two-arg expect.
• examples/cli-walkthrough.sh – git walkthrough (init → commit → branch → merge-conflict → resolve) in a temp dir. Demonstrates the same primitives applied to non-HTTP commands, and the "demo creates and cleans up its own sandbox" pattern.
• references/primitives.md – detailed rationale for each primitive, when to reach for which, and patterns (reusable-call functions, multi-phase scripts, env-variable escape hatches).