Touch Panel

Touch Panel Skill

Zoe drives physical kiosk panels via panel_* MCP tools and can SSH into them for diagnostics and repair.

When to use this skill

• User asks about the touch screen / panel / kiosk
• Diagnosing why the panel is blank, frozen, or showing wrong content
• Restarting, updating, or re-provisioning a panel
• Controlling what shows on the panel (navigate, announce, smart-home overlay, etc.)
• Registering a new panel or managing panel tokens

Current hardware (production)

NEVER use zoe.the411.life from or for the panel — Cloudflare Access blocks it with HTTP 302.

On-device software stack

• zoe-kiosk.service — systemd service managing Chromium kiosk
• zoe-kiosk-watchdog.timer — restarts kiosk if dead, every 60s
• /opt/TouchKio/start-kiosk.sh — Chromium launcher
• /opt/TouchKio/config.json — { server_url, panel_id, token }
• /opt/TouchKio/.provisioned — flag file; absent = first-boot mode
• /opt/TouchKio/provision-server.py — local HTTP server (WiFi + QR provisioning)
• /opt/TouchKio/wifi-portal/ — WiFi captive portal bundle
• Chromium CDP remote debug: localhost:9222
• Audio: Jabra Speak 750 (/etc/asound.conf)

Panel MCP tools

Call these directly — they queue actions for the kiosk browser poll loop:

panel_navigate(url, panel_id)          → Load URL full-screen
panel_clear(panel_id)                  → Return to ambient dashboard
panel_announce(text, panel_id)         → TTS on speaker
panel_set_mode(mode, panel_id)         → ambient / listening / thinking / responding
panel_request_auth(panel_id, context)  → Show PIN pad
panel_check_auth(challenge_id)         → Check PIN result
panel_show_smart_home(...)             → HA control overlay
panel_show_media(...)                  → Now-playing card
panel_browser_screenshot(url, panel_id)→ Screenshot to fullscreen
panel_ssh_exec(panel_id, command)      → Run SSH command on panel

Default panel: zoe-touch-pi. Use panel_id="all" for all panels.

panel_ssh_exec looks up IP/user/key from the panel registry DB. Use it for diagnostics instead of raw SSH.

SSH commands (via panel_ssh_exec or direct)

panel_ssh_exec("zoe-touch-pi", "systemctl status zoe-kiosk")
panel_ssh_exec("zoe-touch-pi", "sudo systemctl restart zoe-kiosk")
panel_ssh_exec("zoe-touch-pi", "journalctl -u zoe-kiosk -n 50")
panel_ssh_exec("zoe-touch-pi", "cat /opt/TouchKio/config.json")
panel_ssh_exec("zoe-touch-pi", "curl -s http://localhost:9222/json/list")
panel_ssh_exec("zoe-touch-pi", "aplay -l")
panel_ssh_exec("zoe-touch-pi", "sudo reboot")

Troubleshooting

Backend API

GET  /api/panels                           → list registered panels
POST /api/panels/register                  → register new panel
GET  /api/panels/{id}/status               → live status
POST /api/panels/{id}/token                → issue device token
GET  /api/panels/{id}/bindings             → user bindings
PUT  /api/panels/{id}/bindings             → set user bindings
POST /api/panels/provision/request         → request pairing code (first-boot)
GET  /api/panels/provision/{code}          → poll pairing status
POST /api/panels/provision/{code}/confirm  → confirm pairing (from phone)

Browser visibility architecture

The Pi is a thin kiosk client — it runs Chromium pointing at Zoe's nginx. All browser automation (research, HA setup, etc.) runs headless on the Jetson. Use panel_browser_screenshot to show the user what Zoe is doing:

panel_browser_screenshot(navigate_to="https://example.com", caption="Searching...", panel_id="zoe-touch-pi")

Voice path

Wake word runs on Pi → STT via POST /api/voice/transcribe (whisper.cpp on Jetson) → POST /api/voice/command. Uses X-Device-Token header.

Multi-panel support

Always call GET /api/panels to discover panels dynamically. Never hardcode 192.168.1.61. The registry returns ip_address, ssh_user, ssh_key_path, ssh_port.

Deploy runbook

# From Jetson repo root — deploy scripts/config to panel
scripts/setup/touchscreen/install_touchscreen.sh \
  --host 192.168.1.61 --user pi \
  --server-url https://192.168.1.218 --panel-id zoe-touch-pi

# After HTML/JS changes
docker compose restart zoe-ui
panel_ssh_exec("zoe-touch-pi", "sudo systemctl restart zoe-kiosk")

Escalation

• Panel MCP tools (display/audio/navigate): handle directly
• SSH diagnostics: use panel_ssh_exec
• Code changes to Zoe source: escalate to OpenClaw (has bash + file editing)
• Code changes to touch HTML pages: Cursor IDE agent