Groq Prod Checklist

Groq Production Checklist

Overview

Complete pre-launch checklist for deploying Groq-powered applications to production. Covers API key security, model selection, rate limit planning, fallback strategies, and monitoring setup. Work top-to-bottom: each section is a gate that must be green before the go-live verification runs.

Deep code (fallback function, health-check endpoint, go-live script) lives in references/ so this file stays scannable — drill in when you reach that step.

Prerequisites

• Staging environment tested with Groq API
• Groq Developer or Enterprise plan (free tier is not suitable for production)
• Production API key created in console.groq.com
• Monitoring and alerting infrastructure ready

Instructions

Read the target app's Groq integration and config, then walk each gate below. Tick every box; an unchecked item is a launch blocker.

1. API Key & Auth

• Production API key stored in secret manager (not .env files)
• Key is NOT shared with development or staging environments
• Key rotation procedure documented and tested
• Pre-commit hook blocks gsk_ pattern in code

2. Model Selection

• Production model chosen and tested (recommend llama-3.3-70b-versatile)
• Fallback model configured (llama-3.1-8b-instant)
• Deprecated model IDs removed (check deprecations)
• max_tokens set to actual expected output size (not context max)

3. Rate Limit Planning

• Production rate limits known (check console.groq.com/settings/limits)
• Estimated peak RPM < 80% of limit
• Estimated peak TPM < 80% of limit
• Exponential backoff with retry-after header implemented
• Request queue for burst protection (p-queue or similar)

4. Error Handling & Fallback

• All Groq error types caught (Groq.APIError, Groq.APIConnectionError)
• 429 errors retried with backoff
• 5xx errors retried with backoff
• 401 errors trigger alert (key may be revoked)
• Network timeouts configured (default 60s may be too long)
• Circuit breaker pattern for sustained failures
• Fallback-to-degradation wrapper in place — see the completionWithFallback pattern in references/implementation.md

5. Health Check

• /api/health (or /healthz) probes Groq with a 1-token request and returns 503 when degraded — full route in references/implementation.md

6. Monitoring Setup

• Latency histogram (p50, p95, p99)
• Token throughput counter (tokens/sec by model)
• Error rate by status code (429, 5xx)
• Rate limit remaining gauge (from response headers)
• Cost tracking (tokens * price per million)
• Alert: latency p95 > 1s (Groq normally < 200ms)
• Alert: error rate > 5%
• Alert: rate limit remaining < 10%

7. Spending Controls

• Monthly spending cap set in Groq Console
• Budget alerts at 50%, 80%, 95%
• Auto-pause enabled when cap is reached

8. Documentation

• Incident runbook created (see groq-incident-runbook)
• Key rotation SOP documented
• On-call knows how to check status.groq.com
• Rollback procedure tested

9. Go-Live Verification

Run the pre-flight curl script against production — status, key, health endpoint, and rate-limit headroom must all pass. Full script and pass/fail table in references/go-live.md.

Output

Working through this skill produces a go / no-go launch decision:

• A completed checklist where every box is ticked or explicitly waived with a reason.
• A green go-live verification run (all four pre-flight checks passing).
• The alert matrix (below) wired into your monitoring stack.

Any unchecked security or auth item (Sections 1, 2) is a hard blocker; unchecked monitoring or spending items (Sections 6, 7) are P3 blockers that may launch with a tracked follow-up.

Error Handling

Wire these alerts before go-live so production failures page the right severity:

Examples

Minimal fallback skeleton — try the primary model, fall back to the fast model on 429/5xx:

try {
  return await groq.chat.completions.create({ model: "llama-3.3-70b-versatile", messages, timeout: 15_000 });
} catch (err: any) {
  if (err.status === 429 || err.status >= 500) {
    return await groq.chat.completions.create({ model: "llama-3.1-8b-instant", messages, timeout: 10_000 });
  }
  throw err;
}

• Full fallback-with-degradation function and health-check endpoint: references/implementation.md
• Complete go-live verification script and result interpretation: references/go-live.md

Resources

• Groq Status Page
• Groq Rate Limits
• Groq Spend Limits
• Groq Models (check deprecations)

Next Steps

Once launched, keep the integration current: schedule model-deprecation reviews against the Groq deprecations page, and for version upgrades follow the groq-upgrade-migration skill. If an incident fires an alert above, escalate through the groq-incident-runbook.

Source: jeremylongshore/claude-code-plugins-plus-skills → skills/.curated/groq-prod-checklist/SKILL.md

Also appears in: jeremylongshore/claude-code-plugins-plus-skills/plugins/saas-packs/groq-pack/skills/groq-prod-checklist/SKILL.md