jetbrains Read-only consistency audit across the skillshare codebase. $ARGUMENTS specifies focus area (e.g., "flags", "tests", "targets") or omit for full audit.
Scope: This skill only READS and REPORTS. It does not modify any files. Use implement-feature to fix issues or update-docs to fix documentation gaps.
Audit Dimensions
Run all 4 dimensions in parallel where possible. For each, produce a summary table.
1. CLI Flag Audit
Compare every flag defined in cmd/skillshare/*.go against website/docs/commands/*.md.
# Find all flags in Go source
grep -rn 'flag\.\(String\|Bool\|Int\)' cmd/skillshare/
grep -rn 'Args\|Usage' cmd/skillshare/
Report:
- UNDOCUMENTED: Flag exists in code but not in docs
- STALE: Flag documented but not found in code
- OK: Flag matches between code and docs
2. Spec vs Code
For each spec in specs/ marked as completed/done:
- Verify the described feature exists in source code
- Check that the spec's acceptance criteria are testable
Report:
- IMPLEMENTED: Spec complete, code exists
- MISMATCH: Spec says done but code missing or partial
- PENDING: Spec not yet marked complete (informational)
3. Test Coverage
For each command handler in cmd/skillshare/<cmd>.go:
- Check if
tests/integration/<cmd>_test.goexists - Check if key behaviors have test cases
# List all command handlers
ls cmd/skillshare/*.go | grep -v '_test.go\|main.go\|helpers.go\|mode.go'
# List all integration tests
ls tests/integration/*_test.go
Report:
- COVERED: Command has integration test file with test cases
- PARTIAL: Test file exists but missing key scenarios
- MISSING: No integration test for this command
4. Target Audit
Verify internal/config/targets.yaml entries:
- Each target has both
global_pathandproject_path - Aliases are consistent
- No duplicate entries
Report:
- OK: Target entry complete and valid
- INCOMPLETE: Missing required fields
- DUPLICATE: Name or alias collision
Output Format
== Skillshare Codebase Audit ==
### CLI Flags (N issues)
| Command | Flag | Status |
|-----------|-------------|--------------|
| install | --force | OK |
| install | --into | UNDOCUMENTED |
### Specs (N issues)
| Spec File | Status |
|----------------------|-------------|
| copy-sync-mode.md | IMPLEMENTED |
| some-feature.md | MISMATCH |
### Test Coverage (N issues)
| Command | Status | Notes |
|-----------|---------|--------------------|
| sync | COVERED | |
| audit | PARTIAL | missing edge cases |
| target | MISSING | |
### Targets (N issues)
| Target | Status | Notes |
|-----------|------------|---------------|
| claude | OK | |
| newagent | INCOMPLETE | no project_path |
== Summary: X OK / Y issues found ==
5. Handler Split Audit
For commands with >300 lines in cmd/skillshare/<cmd>.go, verify the handler split convention is followed:
# Find large command files
wc -l cmd/skillshare/*.go | sort -rn | head -20
Check that large commands are properly split:
| Suffix | Expected for large commands |
|---|---|
_handlers.go |
Core logic extracted |
_render.go |
Output rendering separated |
_tui.go |
TUI components isolated |
Report:
- SPLIT: Large command properly follows handler split convention
- MONOLITH: >300 lines without split (should be refactored)
- N/A: Small command, no split needed
6. Oplog Coverage
Verify all mutating commands have oplog instrumentation:
# Find commands that modify state
grep -rn 'func handle\|func cmd' cmd/skillshare/*.go
# Check for oplog.Write calls
grep -rn 'oplog.Write' cmd/skillshare/
Mutating commands (install, uninstall, sync, update, init, collect, backup, restore, trash) should all write to oplog. Read-only commands (list, status, check, search, audit, log, version) should not.
Report:
- INSTRUMENTED: Mutating command has oplog.Write
- MISSING: Mutating command lacks oplog instrumentation
- N/A: Read-only command (no oplog expected)
7. Web API Consistency
Verify internal/server/handler_*.go routes match CLI commands:
# List all handler files
ls internal/server/handler_*.go | grep -v _test.go
# Check route registration in server.go
grep -n 'HandleFunc\|Handle(' internal/server/server.go
Report:
- SYNCED: CLI command has corresponding API handler
- CLI-ONLY: Command exists in CLI but not in Web API (may be intentional)
- API-ONLY: API handler without CLI counterpart (unusual)
Output Format
== Skillshare Codebase Audit ==
### CLI Flags (N issues)
| Command | Flag | Status |
|-----------|-------------|--------------|
| install | --force | OK |
| install | --into | UNDOCUMENTED |
### Specs (N issues)
| Spec File | Status |
|----------------------|-------------|
| copy-sync-mode.md | IMPLEMENTED |
| some-feature.md | MISMATCH |
### Test Coverage (N issues)
| Command | Status | Notes |
|-----------|---------|--------------------|
| sync | COVERED | |
| audit | PARTIAL | missing edge cases |
| target | MISSING | |
### Targets (N issues)
| Target | Status | Notes |
|-----------|------------|---------------|
| claude | OK | |
| newagent | INCOMPLETE | no project_path |
### Handler Split (N issues)
| Command | Lines | Status | Notes |
|-----------|-------|-----------|--------------------|
| install | 450 | SPLIT | 6 sub-files |
| audit | 320 | MONOLITH | should split render |
| status | 80 | N/A | |
### Oplog (N issues)
| Command | Mutating? | Status |
|-----------|-----------|---------------|
| install | Yes | INSTRUMENTED |
| trash | Yes | MISSING |
| list | No | N/A |
### Web API (N issues)
| Command | CLI | API | Status |
|-----------|-----|-----|----------|
| install | Yes | Yes | SYNCED |
| diff | Yes | No | CLI-ONLY |
== Summary: X OK / Y issues found ==
Rules
- Read-only — never modify files, only report
- Evidence-based — every finding must include file path and line number
- No false positives — verify with grep before flagging
- Scope $ARGUMENTS — if user specifies "flags", only run dimension 1; "handlers" for dimension 5, "oplog" for dimension 6, "api" for dimension 7