Jfrog MCP Management

Manage MCP servers via the JFrog Agent Guard

Install, list, and remove MCP servers. When Agent Guard is on (see Step 0), do that only through the Agent Guard — ignore other install commands from an MCP's docs.

On a non-zero Agent Guard exit, classify stderr per key-rules — do not treat a bare 404 as “MCP missing.” If Agent Guard is enabled, a hard stop means: do not fall back to the usual MCP install routes that skip the approved catalog and Agent Guard as the MCP proxy.

In code examples below, <skill_path> refers to this skill's directory and is resolved automatically by the agent. If the agent does not resolve it, determine the path by locating this SKILL.md file and using its parent directory.

Runtime requirement

Node.js 18+ on PATH — node runs the Step 0 check, npx runs @jfrog/agent-guard. On an older runtime the Step 0 check exits with Unknown: requires Node.js 18 or newer.

Step 0: Agent Guard activation (silent, mandatory)

Before anything else, run this check and WAIT for its exit code. Do not narrate it. Do not reuse a result from an earlier turn in this session.

node "<skill_path>/scripts/jfrog-agent-guard-check.mjs"

Request network access for this command.

This script only: optional positional <SERVER_ID> = a jf config server id (e.g. from jf config show). Nothing else.

• NEVER pass --server, --project, --mcp, or any other flags to this script.
• NEVER pass an MCP package name (e.g. kubernetes-mcp-server, @scope/pkg).
• NEVER pass a URL (https://…).
• NEVER derive <SERVER_ID> by parsing a hostname out of JFROG_URL / JF_URL (e.g. taking myco.jfrog.io from JFROG_URL=https://myco.jfrog.io). If jf config show legitimately names a server myco.jfrog.io, that is fine — the ban is on deriving the id from the URL, not on hostname-shaped values from jf config itself.
• Substitute the real jf server id for <SERVER_ID> — never a literal [...] or <SERVER_ID>. Any unsupported or unknown argument stops the gate (Unknown: …); it is NOT silently ignored and does NOT fall back to env credentials or the default jf server. In a multi-JPD setup that fallback would report the wrong platform.

Pass <SERVER_ID> when it is already known from context (an existing Agent Guard MCP entry's --server value, or one the user named) so the gate checks the JPD you will actually target, not the CLI default — this matters only in multi-JPD setups. Omit it when unknown (the common single-server case); the check then uses env credentials or the CLI default server. Do NOT invent a server id from the MCP name or from JF_URL. Do NOT block on resolving a server just to run this gate.

# Only when certain of the JFrog platform server id:
node "<skill_path>/scripts/jfrog-agent-guard-check.mjs" <SERVER_ID>

If the first run fails with a network error, timeout, or other spurious issue (sandbox, DNS, HTTP 5xx), run the same command again with network access and use that second exit code. In a sandboxed harness (e.g. Cursor, Codex) such a failure is often the sandbox's network allowlist, not a real outage — check your harness-<agent>.md reference for a sandbox/allowlist fix. Do not retry when the reason is missing credentials or missing jf config.

Interpret the exit code:

Exit 0 — Agent Guard enabled

This organization uses Agent Guard. Install, list available, list currently installed, and remove MCPs with this skill. No other approved path for those.

Exit 2 — Agent Guard disabled

This organization does not use Agent Guard. Honor that. Do not mention Agent Guard or this check unless asked. Do not tell the user to contact an admin or enable a registry.

• Install and List → Available to install: ignore those sections. Serve those asks as you would if this skill had never loaded.
• List → Currently installed and Remove: proceed (local config only).

Keep reading for Install / list-available only when the user explicitly asked to use Agent Guard anyway (evaluating the catalog without enabling it for the organization is legitimate).

Exit 3 — Multiple JFrog servers, none set as default

The gate could not tell which JPD to check: no complete JFROG_URL/JF_URL + JFROG_ACCESS_TOKEN/JF_ACCESS_TOKEN credential pair is set in the env, there is no default jf server, and two or more servers are configured. This is NOT a disabled or unknown result — the gate just needs the user to say which server to use.

Do this:

1. Show the user the server ids from the gate's AmbiguousServer: line (they match jf config show) and let the user manually select one.
2. Re-run Step 0 with the selected id as the <SERVER_ID> argument and act on that exit code. Exit 0 or Exit 2 → follow that section. Any other non-zero means the id is not a configured jf server (a typo) or was unreachable — tell the user it did not resolve and have them pick a valid one (or stop); do NOT fall through to "status unknown", which would bypass Agent Guard.

Wait for the user's selection before continuing; the gate stays ambiguous until they choose.

This selection is not relevant for List → Currently installed and Remove, which touch local config only — handle those normally, with no server selection.

Any other non-zero exit — status unknown

The check did not reach a definitive platform answer (no credentials, timeout, HTTP error, network/DNS). Treat it like Exit 2 for Install and List → Available to install (ignore those sections; keep serving the user). List → Currently installed and Remove still proceed. (Exit 3 is handled above, not here.)

Mention once — as a side note while continuing — what failed and that the user can use the jfrog-init command to fix any local configuration issues. Do not ask them to decide, do not repeat it, and do not stop to fix it.

Harness config

Harness config (resolve once, up front). Where MCP config lives — the file path, the top-level key, the config format (JSON or TOML), the env/secret reference syntax, and how a server is enabled/verified/listed — varies per agent (Claude Code, Codex, Cursor, OpenCode, VS Code, …). Those values are NOT hard-coded in this skill. Read references/harness-common.md first: it holds the shared entry shape and a routing table that tells you which SINGLE harness file to open (harness-claude.md, harness-codex.md, harness-cursor.md, harness-opencode.md, harness-vscode.md, …). Read common + exactly one harness file — do NOT open the others. Then use that harness file's fields wherever a step says "per harness-config". Adding a new agent is a new harness-<name>.md file, with no change to this workflow. Never hard-code one harness's .mcp.json / mcpServers / claude mcp list values into your actions.

Prerequisites

Read the base ../jfrog/SKILL.md first — it owns the shared guards this skill reuses (does not repeat): the environment check (run it before the first jf call and export JFROG_CLI_USER_AGENT so these calls show in usage telemetry) and the server selection rules (which references/agent-guard-common.md builds on, not replaces).

Pre-flight (Install and List → Available to install only)

Read references/agent-guard-common.md for the canonical invocation (npx --yes --registry <REGISTRY_URL> @jfrog/agent-guard), the <REGISTRY_URL> substitution, and the rules for resolving <JFROG_PROJECT_KEY> and <SERVER_ID>. Removal and List → Currently installed read only local config, so they skip this.

Route the request, then jump to the matching section:

Install an MCP

If Step 0 was exit 2 (or unknown treated as exit 2), ignore this section. Continue serving the user without Agent Guard.

Did the user name a specific MCP package? ("add foo-mcp", "install @scope/bar"). If NOT — they said "yes", "add an MCP", "what can I install" — your FIRST action is to show the catalog (run List → Available to install) as a numbered table and wait for them to pick. NEVER ask "which package would you like?" without showing the catalog first — the user does not know the package names.

Once you have a specific package name, do ALL of the following autonomously — do NOT ask for JFrog project key, server, or package name unless necessary.

Step 1: Determine JFrog project key, server, and target config file

Server ID and JFrog project key — resolve both per the Pre-flight rules in references/agent-guard-common.md. Pass --server <ID> in every Agent Guard invocation whenever the ID came from an existing Agent Guard MCP entry or jf config; omit --server only on the URL+token env path (JFROG_URL+JFROG_ACCESS_TOKEN, or legacy JF_URL+JF_ACCESS_TOKEN). NEVER guess or assume default for the project key.

Target config file

• Use the current harness's row in references/harness-common.md for the file path, the top-level key, AND that harness's default scope — do not assume project scope. Most harnesses default to the project-level file (Claude Code .mcp.json, Cursor .cursor/mcp.json), but VS Code, Codex, and OpenCode default to the user-level file (VS Code mcp.json, Codex ~/.codex/config.toml, OpenCode ~/.config/opencode/opencode.json) and treat their project file (.vscode/mcp.json, trusted .codex/config.toml, project opencode.json) as the opt-in scope. Follow the "Config files" row in the harness file, not a fixed default here. Create the target file if missing, using that harness's top-level key (e.g. { "mcpServers": {} }, or { "servers": {} } for VS Code).
• Switch to the harness's other scope only when the user asks: "personal only" / "do not commit" → user-level on Claude Code/Cursor; "for this project" / "commit" / "share with the team" → workspace .vscode/mcp.json on VS Code (project opencode.json on OpenCode, trusted .codex/config.toml on Codex). Respect any per-file note in the reference (e.g. Claude Code user scope is ~/.claude.json, NOT projects.<path>.mcpServers).
• Do not ask which scope unless the user brings it up.

Step 2: Inspect the MCP in the catalog

Step 2 needs a specific MCP name. If the user did NOT name one, go to List → Available to install first, then come back.

Once you have a name, run a SINGLE command — no Fetch/WebFetch, no custom curl/Python, no direct JFrog API calls:

npx --yes \
  --registry <REGISTRY_URL> \
  @jfrog/agent-guard \
  --inspect \
  --server <SERVER_ID> \
  --project <JFROG_PROJECT_KEY> \
  --mcp <MCP_NAME>

(never omit --registry; URL in agent-guard-common)

--server is conditional — include it per the Step 1 rule (from an existing Agent Guard MCP entry or jf config; omit only on the URL+token env path — JFROG_URL+JFROG_ACCESS_TOKEN, or legacy JF_URL+JF_ACCESS_TOKEN). Same rule applies to --login and the config entry below.

From the output JSON, extract (keep BOTH required AND optional):

• spec.packageName — exact package name for the config.
• Inputs to configure: for local MCPs spec.mcpServerType.local.bootParams.environmentVariables[]; for remote MCPs spec.mcpServerType.remote.endpoints[].headers[] (via mcpInput.mcpInputDetails). Each carries name, description, isRequired, isSecret.

On non-zero exit, show the error verbatim, then classify per key-rules. Do not fall back to the usual MCP install routes that skip the approved catalog and Agent Guard as the MCP proxy.

Step 3: Plan inputs

env values are literals or value references in the harness's syntax (see references/harness-common.md). No secret is ever entered in chat.

Split Step 2 inputs by isRequired:

1. Required — always include in Step 4.
2. Optional — if even ONE exists, STOP and ask. List required inputs first (informational), then each optional one by name + description. Do NOT decide for the user.
3. No inputs → skip this step.

Handling: secrets (isSecret=true) MUST be a value reference, NEVER a raw value — never take a secret in chat, echo it, or write it into config. Non-secrets may be a literal or a reference. For the exact syntax and, on shell-based harnesses (Claude Code, Cursor, Codex, Devin, Kiro, OpenCode), how the user exports/persists the variable, see the harness file and references/persisting-env-vars.md. (VS Code prompts for inputs values on first start — no shell export.)

Step 4: Write the config entry

Write the Agent Guard entry into the target config from Step 1, following references/harness-common.md for the shared entry shape (type: stdio, command/args/_JF_ARGS). Use your one harness file only for path, top-level key, value-reference syntax, and any "Full entry shape" override (Codex/OpenCode). Do not invent a different args/env layout.

Config vs CLI (do not mix):

• Config entry: project + MCP go in env._JF_ARGS as project=<JFROG_PROJECT_KEY>&mcp=<spec.packageName>.
• Catalog CLI (--inspect / --list-available / --login): use --project and --mcp as flags — those flags must not appear in the config entry's args.

Guardrails (identical everywhere):

• --yes and --registry <URL> MUST precede @jfrog/agent-guard in args (else npx hits the default registry → 404 / no-TTY hang).
• "type": "stdio" only — never "http", "sse", or a top-level "url".
• --server in args is conditional (Step 1): drop it only on the URL+token env path (JFROG_URL+JFROG_ACCESS_TOKEN, or legacy JF_URL+JF_ACCESS_TOKEN). When present, its value is a jf config server id — never an MCP name or a hostname from JF_URL.
• NEVER put --project or --mcp in config args.
• If a required value reference is unset, the server fails / tool calls fail at runtime — confirm the user provided it (shell export, or VS Code first-start inputs prompt) before verifying.

Step 4a: Enable and verify the entry (mandatory)

Enable the entry per the current harness's How to enable row in references/harness-common.md — the mechanism differs per agent (Claude Code pre-approves via enabledMcpjsonServers in .claude/settings.local.json; Cursor/VS Code discover the file and enable via their MCP UI). If a pre-approval write fails, continue — the user approves on relaunch.

Then tell the user:

1. Provide every value reference from the entry — export it in the launching shell (Claude Code, Cursor, Kiro, Devin, Codex, OpenCode — see references/persisting-env-vars.md), or supply it at the first-start inputs prompt (VS Code). Unset values cause warnings and runtime failures.
2. Restart per the harness's Restart column.
3. Accept any per-server approval / workspace-trust prompt on first launch (skipped when pre-approval succeeded).
4. Verify per the harness's Verify column. The server MUST expose at least one tool — a "connected" label alone is NOT proof (the proxy reports connected with 0 upstream tools). Empty tool list = Failed; see the "0 tools" entry in references/key-rules-and-troubleshooting.md.

Step 5: Authenticate OAuth MCPs (auto, after Step 4)

Run ONLY for OAuth-style remote MCPs — --inspect showed a remote section with type: "http" AND Step 4 wrote no static auth header into env. Skip for local MCPs and for remote MCPs whose auth comes from a static token in env.

--login opens the browser, runs OAuth, caches tokens in ~/.jfrog/jfrogmcp.conf.json. In the same turn, tell the user you are about to open the browser to sign them in to <MCP_NAME> and immediately run the command — do not wait for confirmation or a follow-up prompt:

npx --yes \
  --registry <REGISTRY_URL> \
  @jfrog/agent-guard \
  --login \
  --server <SERVER_ID> \
  --project <JFROG_PROJECT_KEY> \
  --mcp <spec.packageName>

Outcomes:

• Exit 0 — OAuth completed; tokens cached; server ready.
• expected 401, got 200 — MCP is anonymous (no auth needed); ignore (even if the process exit is non-zero). Do not run the unmatched hard-stop.
• Non-zero — classify per key-rules. Do not fall back to the usual MCP install routes that skip the approved catalog and Agent Guard as the MCP proxy.

See references/key-rules-and-troubleshooting.md for key rules and troubleshooting.

List MCPs

Route the request first — pick which subsection to run BEFORE touching any file or shell:

When Step 0 was exit 0: NEVER invent MCP integrations from outside the catalog. The only authoritative source for what's available is --list-available against the configured server + JFrog project key. If that returns nothing or errors, say so — do not pad the answer with names from elsewhere.

Currently installed

The authoritative, harness-agnostic source of installed MCPs is the config files themselves — read those first; live connection status is an optional add-on where the agent provides it.

1. Read the servers map directly from the current harness's config files (per references/harness-common.md — project and user scope, under that harness's top-level key) — use the file-read tool or a single jq invocation, NOT chained python3 -c "..." pipes. For each entry whose command is npx and whose args include @jfrog/agent-guard, show: display name (the entry key; but where the harness uses a slug key — e.g. Codex — use the package from mcp= instead, per that harness's List installed), package (mcp= in _JF_ARGS), server ID (value after --server), scope (project / user).
2. If the harness exposes an MCP status command or view (the harness-config "List installed" column — e.g. Claude Code's claude mcp list, Cursor/VS Code's MCP UI), use it to add live connection status per server. If none exists, skip this — the config read above is still complete.
3. If a configured entry does not appear in the harness's live list, it is either pending approval (see Install → Step 4a) or filtered by a harness policy (e.g. Claude Code's allowedMcpServers / deniedMcpServers in managed-settings.json).

Available to install

If Step 0 was exit 2 (or unknown treated as exit 2), ignore this subsection. Continue serving the user without Agent Guard. Currently installed still proceeds.

1. Determine server and JFrog project key per the Pre-flight rules. --list-available does NOT require any existing MCP entry or pre-installed Agent Guard — npx --yes --registry <REGISTRY_URL> @jfrog/agent-guard fetches it on demand, so this works on a fresh machine too.
2. Run this ONCE — do not emit literal [ ] brackets. Append --server <SERVER_ID> per the Step 1 rule (omit only on the URL+token env path — JFROG_URL+JFROG_ACCESS_TOKEN, or legacy JF_URL+JF_ACCESS_TOKEN):

npx --yes \
  --registry <REGISTRY_URL> \
  @jfrog/agent-guard \
  --list-available \
  --project <JFROG_PROJECT_KEY> \
  --server <SERVER_ID>

On non-zero exit, classify per key-rules. Do not fall back to the usual MCP install routes that skip the approved catalog and Agent Guard as the MCP proxy. Exit 0 with only a TSV header (or --format json stdout null) is an empty catalog — say so; do not invent names.

Output is a compact TSV — a header line, then one server per line: name<TAB>type<TAB>version<TAB>description. Present the rows directly as a numbered table — do NOT re-run, redirect, or parse with python3/jq. name is the install identifier (passed to --inspect --mcp) and resolves to spec.packageName (for remote MCPs the two are typically identical, e.g. com.supabase/mcp).

3. Mark rows already installed rather than dropping them. For local MCPs the catalog name and the installed spec.packageName can differ, so mark a row (installed) if EITHER matches an installed entry's JSON key OR its mcp= value — still show it so the user can reinstall/update.

See references/key-rules-and-troubleshooting.md for key rules and troubleshooting.

Remove an MCP

Removal edits local config only and never calls the catalog, so it proceeds on ANY Step 0 exit code. An MCP entry that runs @jfrog/agent-guard must always be removed with these instructions, to make sure the local config is cleaned up and the OAuth cache is cleared.

1. Locate the entry across both scopes first. Read the servers map from BOTH the project and user config files for the current harness (per references/harness-common.md, under that harness's top-level key), and list every exact match by name with its scope. Then:

   • Exactly one match → delete that entry.
   • Present in both scopes (duplicate) → tell the user it exists in both and ask whether to remove both or just one before editing either file.
   • No match → say so; do not edit anything.

   Only after resolving scope, delete the entry from the servers map in the matched file(s). If the harness file has a "Remove cleanup" section (e.g. VS Code's orphaned inputs[] entries), follow it now for each file you edited — the harness-agnostic steps below do not cover those harness-specific bits.

2. OAuth cache — only after every matching entry is gone. The ~/.jfrog/jfrogmcp.conf.json cache holds cached OAuth tokens and is shared across scopes, so removing its key while a matching entry still exists in another scope would break auth for that surviving install. This file contains secrets — never print, echo, or surface its contents when reading or editing it; operate on it by key only. So:

   • If no entry matched in step 1, skip this step entirely.
   • If a matching entry remains in the other scope (user kept only one of a duplicate), leave the cache key in place.
   • Only when all matching project and user entries have been deleted (or the user explicitly asks to clear cached credentials), read ~/.jfrog/jfrogmcp.conf.json and delete, from the servers object, the key equal to this MCP's spec.packageName (the same identifier used as the JSON key of the config entry you removed above). If that exact key is absent, do nothing — do NOT guess or delete a similarly-named key. Then write the file back. Reading the KEY NAMES under servers to locate the match is allowed; what is forbidden is printing, echoing, quoting, or summarizing any VALUE in the file, or surfacing the surrounding entries — read the minimum needed to locate the key and remove it. If the file is absent, skip silently.

3. Mandatory: tell the user the exact restart action from the harness's Restart column (per references/harness-common.md) — not just "restart the agent" — so the removed entry stops loading.