Autoupgrade Icp CLI

Set up automatic icp CLI upgrades

A one-time installer: it adds a SessionStart hook that checks whether icp and ic-wasm are current and — if the user wants — upgrades them before work starts. Once these steps are done the user never needs this skill again.

ic-wasm is covered alongside icp because the official recipes (@dfinity/motoko, @dfinity/rust, @dfinity/static-site, @dfinity/asset-canister) invoke it on every build. An ic-wasm left behind while icp moves forward produces build failures that read as recipe bugs, so upgrading only one of the pair is the worse default.

icp has its own check (icp settings update-check) that is worth leaving on, but it only speaks once the user runs an icp command — by which point the agent has already chosen what to write. This hook runs before the session's first prompt, so the version reaches Claude's context up front, and it covers ic-wasm too.

Step 1 — Ask the user which mode they want

The installer cannot make this call for the user, so ask before writing anything:

"Two options for how the hook behaves when a newer version exists: notify — it prints the versions and the exact upgrade command, and nothing is installed until you run it. auto — it runs that upgrade itself at session start. Which do you want? You can switch later by editing one flag in the hook."

Default to notify if the user has no preference — it is the reversible choice.

Also tell them what adding a hook means, and do not attempt to bypass the approval:

"I'm adding a SessionStart hook that runs .claude/upgrade-icp-cli.sh. Claude Code will ask you to approve/trust it before it runs automatically."

Step 2 — Check prerequisites

command -v curl   >/dev/null 2>&1 && echo "curl: ok" || echo "curl: MISSING"
icp --version     2>/dev/null     || echo "icp: not installed"
ic-wasm --version 2>/dev/null     || echo "ic-wasm: not installed"

If either tool is missing, mention the install command (npm install -g @icp-sdk/icp-cli @icp-sdk/ic-wasm) but do not run it unprompted — installing a toolchain is a different decision from keeping one current.

Step 3 — Download the script

Fetch the published script verbatim rather than transcribing it, so the channel detection stays correct as it is updated upstream:

mkdir -p .claude
curl -fsSL https://skills.internetcomputer.org/.well-known/skills/autoupgrade-icp-cli/scripts/upgrade-icp-cli.sh \
  -o .claude/upgrade-icp-cli.sh

Do not hand-write or paraphrase it.

Step 4 — Register the SessionStart hook (idempotently)

If .claude/settings.json does not exist, create it with the content below. If it does, merge: preserve every existing key, hook, and permission, add the SessionStart entry only if an equivalent bash .claude/upgrade-icp-cli.sh command is not already there, and write the parsed JSON back. Never overwrite the file.

Notify mode (the default):

{
  "hooks": {
    "SessionStart": [
      {
        "hooks": [
          { "type": "command", "command": "bash .claude/upgrade-icp-cli.sh --mode notify" }
        ]
      }
    ]
  }
}

Auto mode — same entry with --mode auto, plus a raised timeout, because installing a CLI binary can exceed the default 60 s and a timed-out install leaves the tool half-written:

{
  "hooks": {
    "SessionStart": [
      {
        "hooks": [
          { "type": "command", "command": "bash .claude/upgrade-icp-cli.sh --mode auto", "timeout": 300 }
        ]
      }
    ]
  }
}

Whenever you hand someone an auto-mode hook, say the thing that makes it a real choice: it upgrades the build toolchain while a project is open and blocks session start while it runs, so a session can begin against a different icp than the last one ended with — which can change build behaviour and output for a project that built fine yesterday. That is what some teams want and what others pin against.

Step 5 — Run it once, verify, report

bash .claude/upgrade-icp-cli.sh --mode notify   # or --mode auto, matching the hook

Silence means both tools are current — that is the success case, not a failure. A hand-run always checks the network; the hook throttles (below), so this is also the command for whenever someone wants an answer now.

Then confirm the hook entry appears exactly once, report the versions found and whether anything was upgraded, and remind the user of the trust prompt. If the project commits .claude/, add .claude/.icp-upgrade-check to .gitignore — it is a per-machine timestamp, not shared configuration.

How the script decides what to run

It resolves each binary through its symlinks and reads the install channel off the path, because the upgrade command differs per channel and guessing wrong leaves two copies of the CLI on PATH shadowing each other:

That last row is deliberate: an unrecognised install is reported, never guessed at.

Two consequences worth passing on to users:

• A shadowed install never moves. If an upgrade succeeds but PATH still resolves to the old version, a second copy from another channel is winning — commonly an npm global under nvm alongside a shell-installer copy in ~/.cargo/bin. Upgrading one channel can never touch the other's copy; resolve the binary (command -v icp) to see which wins, then remove one or upgrade the one actually on PATH.
• Auto mode never runs sudo. A non-writable npm prefix is reported as a sudo … command instead, since a password prompt inside a hook has no terminal to answer it.

Throttling

A check that reached a release feed is stamped in .claude/.icp-upgrade-check and not repeated for 6 hours, so the hook costs ~10 ms on most session starts instead of ~1 s. Override with ICP_UPGRADE_CHECK_INTERVAL=<seconds> (0 disables it) or bypass once with --force; a run from a terminal always checks. A failed probe is not stamped, so an offline session retries at the next one.

What this does not upgrade

The hook manages the two CLI binaries only. Recipe versions in icp.yaml (@dfinity/motoko@v5.0.0 and friends) and the Motoko toolchain (moc, mops, the [toolchain] pin in mops.toml) are pinned per project and stay the user's call — load icp-cli and mops-cli respectively for those.

If a build starts failing right after an auto upgrade, check the icp-cli release notes before assuming the project broke.

Additional References

• icp-cli — using the CLI itself: icp.yaml, recipes, environments, deployment.
• mops-cli — the Motoko toolchain and its own version pinning.
• autosync-ic-skills — the companion installer that keeps the IC skills in .claude/skills/ current. The two are independent; installing both is common.