Reflect

Reflect

Extract candidate instincts — patterns repeatedly observed in this session that might be worth promoting to durable memories.

Your role as the agent running this skill

You propose, the user approves. Nothing this skill does writes a memory or marks anything superseded without an explicit yes from the user.

Detectors emit proposals into a holding bucket (they're never auto-promoted to memories). When this skill runs, your job is to make those proposals reviewable — to add the judgement that mechanical matching can't:

1. Classify intent of user prompts in convergence windows — was the user actually correcting the previous edit, or just commenting?
2. Rewrite the content into a useful memory — see below. This is the most important step; the detector's content is a [DRAFT — rewrite…] placeholder, never the finished memory.
3. Judge semantic conflicts — which existing memories (if any) does this proposal supersede?
4. Recommend an action — accept (with rewritten content + supersedes), reject (why), or leave open for the user to think about.

Then stop and ask. Surface each proposal to the user with your recommendation. Wait for explicit approval before running aide reflect accept|reject. The CLI is the write surface; your role is to make the user's approval decision as well-informed as possible, not to make it for them.

Concretely: do not chain "list proposals → accept proposals" in the same turn. List, summarise, recommend, wait, then act on user instruction.

Why rewriting is the default, not the exception

The detector emits an observation ("cat was run 5 times in 1 minute"). That's a structural signal, not a useful memory. A useful memory captures:

• Why the repetition / convergence happened (the underlying need or mistake the agent kept circling around).
• What the canonical alternative is (a specific file path, command, pattern, or piece of project knowledge).
• Scope (this codebase / this kind of task / this directory).

The agent reviewing the proposal does this synthesis by reading the evidence snapshot. The detector can't — it only knows the count.

Bad memory (the raw template): "In this project, cat is run repeatedly. Cache its output."

Good memory (after agent synthesis): "When investigating the aide README for plugin/config questions, the file is stable per commit and the config table sits around lines 11-25 — inject the slice via Read with offset/limit instead of re-cat-ing the whole file."

The proposal's content field literally starts with [DRAFT — rewrite with concrete context before accepting] to make this obvious. If you accept without rewriting, you've stored noise.

How this skill differs from the automatic Stop hook

• The Stop hook (AIDE_REFLECT=1 env or reflect.enabled=true in .aide/config/aide.json) runs aide reflect run automatically at session end. Deterministic-only: marker matching for convergence, pure counting for repetition. No supersession beyond structural instinct_key:* matches.
• This skill adds a second pass: it lists user-prompt candidates that fall in convergence-relevant windows, you judge intent in-context, you search for semantically conflicting memories, then you feed everything back. Higher-quality output, no extra API cost — uses tokens you'd be spending anyway.

Session resolution

All commands below default to the current session — aide finds it by checking, in order: an explicit --session=<id> flag, the AIDE_SESSION_ID env var (set by OpenCode automatically; not by Claude Code), then the session of the most recent observe event. Pass --session=<id> to target a specific session, or run ./.aide/bin/aide reflect current-session to see what would be resolved.

Steps

1. Get candidate prompts

./.aide/bin/aide reflect candidates

Returns JSON like:

{
  "session_id": "abc123",
  "guidance": "For each prompt, judge whether it was correcting...",
  "asks": ["intent"],
  "prompts": [
    {
      "id": "01JF...A",
      "timestamp": "...",
      "text": "no don't add async — it should stay sync",
      "preceding_edit": "Edit src/api/users.ts",
      "following_edit": "Edit src/api/users.ts",
      "file_path": "src/api/users.ts"
    }
  ]
}

If prompts is empty, skip to step 4 (deterministic run only).

2. Classify each prompt

For each prompt, judge its intent using the surrounding edit context:

• corrective — the user was redirecting the assistant's last action
• positive — the user was affirming the assistant's last action ("perfect", "ship it", "lgtm")
• neutral — neither corrective nor affirming (e.g. a new task, a question)

Build a JSON array:

[
  {"id": "01JF...A", "intent": "corrective", "confidence": 0.95},
  {"id": "01JF...B", "intent": "neutral"}
]

3. Run with classifications

./.aide/bin/aide reflect run --llm \
  --classifications-json='[{"id":"01JF...A","intent":"corrective"}]'

Returns a JSON summary: {"proposals_written": N, "shapes": {...}}.

The --llm flag puts the runner in LLM mode, which runs the RequiresLLM detectors (convergence, friction) in addition to repetition. The Stop hook never passes it, so those detectors only ever surface in this reviewed pass.

4. Run in LLM mode without classifications

If step 1 returned no candidates, still run with --llm (not bare) so friction and the marker-based convergence pass fire — only the LLM-graded convergence intent is skipped:

./.aide/bin/aide reflect run --llm

5. List proposals and summarise for the user

mcp__plugin_aide_aide__instinct_proposals_list { "status": "open" }

Summarise each new proposal's summary field for the user. Don't act on anything yet — let them decide.

6. You decide what gets superseded

This is where your judgement matters most. The structural auto-supersession (same instinct_key:* tag) only catches instinct-on-instinct dedup. The interesting case is when a new instinct contradicts a manually-set memory the user wrote earlier — e.g. a "documentation standard: always run rustdoc" memory being superseded by a new "rustdoc runs repeatedly, cache it" instinct.

Mechanical matching can't catch that. You can. Process:

1. Extract the key subject from the proposal (e.g. "rustdoc", a file path, a command name).
2. mcp__plugin_aide_aide__memory_search { "query": "<subject>" }
3. Read each result. Judge — you are the judge:
   • Does the new instinct's guidance contradict this memory's guidance?
   • Does it replace it with a better recommendation?
   • Or does it just touch the same topic without conflicting?
4. Only collect IDs that genuinely conflict. False positives create silent memory loss; bias toward "leave it" when uncertain.
5. Surface your reasoning to the user before acting: "I think proposal X supersedes memory Y because Z — accept with --supersedes=Y?"

7. Rewrite the content, then present recommendations — do not auto-act

For each proposal:

1. Read the evidence snapshot via mcp__plugin_aide_aide__instinct_inspect.
2. Synthesise the underlying lesson. What was the agent (you, or a past you) actually trying to achieve? Why did the pattern repeat / converge? What's the canonical alternative for this codebase?
3. Draft the rewritten memory content. Skip the [DRAFT — …] template text from the proposal; write a useful instinct from scratch.
4. Present to the user with the rewrite inline:

Proposal 01JF… (repetition, rustdoc × 7 in 5 min). Reading the evidence: 6 of the 7 calls were rustdoc --no-deps checking the same public crate while iterating on a doctest. I'd accept with this rewritten content and supersede memory 01JD… ("always run rustdoc") because the new guidance refines, not contradicts, that one:

"When iterating on a single doctest, cargo test --doc <module> re-runs only that doctest in ~1s; reserve rustdoc --no-deps for final pre-commit verification across all crates."

Command: aide reflect accept 01JF… --supersedes=01JD… \ --content="When iterating on a single doctest…"

Then wait. The user might say:

• "yes" → run the command verbatim
• "yes but tweak the wording to …" → adjust --content= and re-present
• "accept but don't supersede" → drop --supersedes
• "reject — that's not actually a pattern, I asked you to repeat for testing" → run reject with that reason
• "leave them open, I'll review later" → do nothing, you're done

If the evidence doesn't support a meaningful rewrite — e.g. the events are a test trigger, a one-off, a data artifact — recommend reject. A proposal with no useful synthesis is noise; promoting it pollutes the memory store.

8. Execute the user's decision via the CLI

Only after the user has chosen — writes are CLI-only per aide convention:

# Accept with rewritten content (the default — see step 7):
./.aide/bin/aide reflect accept <proposal-id> --content="<your synthesised memory>"

# Accept with rewritten content AND supersession:
./.aide/bin/aide reflect accept <proposal-id> \
  --content="<your synthesis>" \
  --supersedes=<mem-id1>,<mem-id2>

# Accept verbatim (the [DRAFT…] template lands as the memory — almost
# never what you want, included only for completeness):
./.aide/bin/aide reflect accept <proposal-id>

# Reject (with reason for the audit trail):
./.aide/bin/aide reflect reject <proposal-id> --reason="not useful"

Supersession unions two sources:

1. Structural (auto) — instinct memories sharing the same instinct_key:* tag (cheap dedup; same Bash command for repetition, same file path for convergence).
2. Semantic (via --supersedes) — IDs from step 6. Works for any memory including manually-set ones with no instinct tags.

Each superseded record gets superseded + superseded_by:<new-id> tags; the new memory gets supersedes:<csv> pointing back. Superseded records stay in the bucket for audit but are filtered out of default queries.

Inspecting evidence

mcp__plugin_aide_aide__instinct_inspect { "id": "<ulid>" }

The evidence.snapshot array contains the observe events that triggered the pattern.

Opt-in toggle for the Stop hook

export AIDE_REFLECT=1      # also: true, on, yes — any truthy value

When unset or set to a falsy value (0, false, off, no), the Stop hook is a no-op. This skill still works regardless — it's manually invoked, not gated by the env var.

Shape catalogue

• repetition — Bash commands run > N times in a session, suggesting the agent forgot it already had the answer. Pure counting, no LLM input needed.
• convergence — Edit A → user corrective marker → Edit B on the same file → optional positive signal. Marker-based by default, upgrades to LLM-classified when intent labels are provided via step 3.
• friction — the same tool failing repeatedly on the same target (a Bash command that keeps erroring, an Edit that won't apply to a file). Gathered from the observe Error field; the lesson worth keeping is usually the fix, which you supply by reading the evidence. RequiresLLM — never auto-fires in the Stop hook.

Detectors declare a RequiresLLM capability — two tiers:

• Deterministic tier (RequiresLLM=false: repetition) runs automatically in the Stop hook. Must be high-precision; nothing reviews it before it lands as a proposal.
• LLM tier (RequiresLLM=true: convergence, friction) runs only in this reviewed pass, when the skill passes --llm (step 3/4). Higher recall is fine — you judge each proposal before anything is promoted.