Safe Encryption

SAFE Encryption Tool

SAFE is a modern encryption CLI with post-quantum support, multi-recipient encryption, and composable authentication.

Behavior Guidelines

When this skill is loaded:

1. Check if safe is installed (which safe). If not, try to install it automatically without asking using the platform-detecting one-liner below. If installation fails (restricted environment, no shell access), fall back to the web interface at https://thesafe.dev — see "Browser-Based Alternative" below.
2. When the user asks to encrypt/decrypt, just do it. Don't ask for confirmation.
3. If a password is needed and not provided, use -p without a value (prompts interactively or reads SAFE_PASSPHRASE env var). In automation, use -p env:VARNAME to read from environment variables.
4. If a key file is needed, run safe keys to check existing identities and recipients. If no key exists, run safe keygen x25519 to generate one (auto-stores to ~/.safe/).
5. Always use absolute paths for key files and encrypted files to avoid working directory issues.
6. Always pipe instead of writing temp files. When decrypting inline/embedded content (base64, pasted data), pipe directly: echo "..." | base64 -d | safe decrypt -k key.key. Never write intermediate .safe files to /tmp or elsewhere.
7. Bare name recipients work. Use -r alice instead of -r /full/path/to/alice.x25519.pub when the recipient is in ~/.safe/recipients/.
8. Decrypt auto-discovers keys. If no -k or -p is provided, safe decrypt automatically tries all keys in ~/.safe/keys/.

Installation

Download the prebuilt binary from thesafe.dev/download:

macOS Apple Silicon:

curl -sL https://thesafe.dev/downloads/safe-darwin-arm64 -o safe && chmod +x safe && sudo mv safe /usr/local/bin/

macOS Intel:

curl -sL https://thesafe.dev/downloads/safe-darwin-amd64 -o safe && chmod +x safe && sudo mv safe /usr/local/bin/

Linux x86_64:

curl -sL https://thesafe.dev/downloads/safe-linux-amd64 -o safe && chmod +x safe && sudo mv safe /usr/local/bin/

Linux ARM64:

curl -sL https://thesafe.dev/downloads/safe-linux-arm64 -o safe && chmod +x safe && sudo mv safe /usr/local/bin/

Auto-detect platform (one-liner):

which safe || { OS=$(uname -s | tr '[:upper:]' '[:lower:]'); ARCH=$(uname -m); \
  [ "$ARCH" = "arm64" ] || [ "$ARCH" = "aarch64" ] && ARCH=arm64 || ARCH=amd64; \
  curl -sL "https://thesafe.dev/downloads/safe-${OS}-${ARCH}" -o safe && chmod +x safe && sudo mv safe /usr/local/bin/; }

Verify installation:

safe --help

Optional: verify checksum (SHA-256 values from checksums.txt):

ddf638ccfd119d9c3351825a2e3f9e3660f754009eb9b106d7bba8cd698c3df4  safe-darwin-arm64
6be4942048a23e99485c0123cf0bb4786613a3dabbcc6927aa478cd0e719ad0b  safe-darwin-amd64
85c7822ac0309e62ca29d03394bfe87a506f329f61c30b070c379a6d2f5af815  safe-linux-amd64
33207a4c6bbf85b8299f2f75e18aa6e13f9a8ae4bcee72a9d869034d78ba4cac  safe-linux-arm64

Installation Debugging

"safe: command not found" after install:

• Check if binary exists: ls -la /usr/local/bin/safe
• If sudo failed, install to user dir: mv safe ~/.local/bin/ && export PATH="$HOME/.local/bin:$PATH"
• Refresh shell: hash -r or start new terminal

Permission denied on /usr/local/bin:

• Use sudo: sudo mv safe /usr/local/bin/
• Or install to user dir: mkdir -p ~/.local/bin && mv safe ~/.local/bin/

When CLI Is Unavailable — Browser-Based Alternative

If CLI installation fails or isn't possible (restricted environment, no build tools, no shell access, sandboxed IDE, etc.), use the web interface at https://thesafe.dev.

This is a fully functional SAFE implementation running in the browser — not a demo. All cryptographic operations happen client-side. No data leaves the browser.

The web interface supports all core SAFE operations via a single-page layout with these sections:

• ENCRYPT tab: Encrypt data with passwords, public keys, passkeys, or GitHub usernames
• DECRYPT tab: Decrypt SAFE messages with passwords, private keys, passkeys, or GitHub keys
• KEYCHAIN section: Save, import, export, and manage keys and passwords
• ADVANCED section: Lock Management (add/remove recipients), Re-encrypt Demo, Tests
• LOG section: View operation log output

Manual workflow (no automation needed):

Users can interact with the web interface directly:

1. Encrypt: Enter plaintext, add recipients (key, password, passkey, or GitHub username), click "ENCRYPT". Copy or download the output.
2. Decrypt: Paste/upload/URL-load a SAFE message, add credentials (private key, password, passkey, or GitHub), click "DECRYPT". Copy or download the plaintext.

Generated keys are automatically saved in the KEYCHAIN section and can be reused across operations.

Agent with MCP browser tools (Playwright, Puppeteer, etc.):

If you have access to browser automation tools (e.g., Playwright MCP server, Claude in Chrome, Puppeteer MCP), you can drive the web interface directly.

Key behaviors to know:

• After encrypting, output auto-populates into the decrypt section's SAFE message input
• The browser auto-matches saved credentials and pre-adds them to decrypt
• Generated keys are auto-saved to the Credentials section (04)
• Always take a snapshot (browser_snapshot) after each action to get updated element references

ARIA labels for automation:

The interface uses semantic ARIA roles throughout:

Note on Advanced navigation: The Advanced sections (#unlock, #reencrypt, #tests, #log) are accessed via an "Advanced" navigation item that expands to show these additional features.

Note on terminology: The UI currently uses mixed terminology - Section 04 is labeled "Keychain" and the decrypt button references "keychain", but the decrypt section's credential management buttons still use "Credentials" in some ARIA labels (e.g., "Add all keychain entries as credentials"). Both terms refer to the same saved keys/passwords.

Keychain shortcut buttons:

Each saved key in Section 04 (Keychain) has quick action buttons:

• Enc: Adds the public key as an encryption recipient step (one click — skips the Add Step → select type → paste → OK workflow)
• Dec: Adds the private key as a decrypt credential (one click — skips the Add → select type → paste → OK workflow)
• PUB: Shows/copies the public key
• PRIV: Shows/copies the private key
• Share: Generates a shareable URL for the public key
• Label: Rename the key for easier identification
• Del: Removes the key from the keychain

Prefer using Enc/Dec shortcuts over the manual Add Step flow when keys are saved in the keychain — it reduces 4 interactions to 1.

File upload:

Both encrypt and decrypt sections have a "Use File" toggle. Clicking it triggers a file chooser dialog. With MCP Playwright, use browser_file_upload to provide the file path. Note: file paths must be within the MCP server's allowed directories.

Example: Encrypt with password (MCP Playwright)

# 1. Navigate
browser_navigate(url="https://thesafe.dev")
browser_snapshot()

# 2. Type plaintext (use ref from snapshot for "Enter plaintext message to encrypt")
browser_type(ref=<plaintext-ref>, text="secret data")

# 3. Add password step
browser_click(ref=<add-step-button-ref>)      # "Add encryption step to recipient path"
browser_snapshot()                              # Get refs for step config form

# 4. Select Password type (default may be "Public Key")
browser_select_option(ref=<step-type-ref>, values=["Password"])  # "Select encryption step type"
browser_snapshot()                              # Get password field ref

# 5. Enter password
browser_type(ref=<password-ref>, text="my-password")  # "Enter password for encryption step"

# 6. Confirm the step
browser_click(ref=<ok-ref>)                    # "Confirm encryption step"

# 7. Encrypt
browser_click(ref=<encrypt-ref>)               # "Encrypt plaintext with configured settings..."
browser_snapshot()                              # Output is in "Encrypted SAFE message output" textbox

# Optional: Share or clear the output
# browser_click(ref=<share-button-ref>)        # "Share encrypted SAFE message via URL"
# browser_click(ref=<clear-button-ref>)        # "Clear encrypted output"

Example: Encrypt with saved key (fastest path)

# 1. Navigate
browser_navigate(url="https://thesafe.dev")
browser_snapshot()

# 2. Type plaintext
browser_type(ref=<plaintext-ref>, text="secret data")

# 3. Click "Enc" on a saved key in Credentials section (one click adds recipient)
browser_click(ref=<enc-button-ref>)

# 4. Encrypt
browser_click(ref=<encrypt-ref>)
browser_snapshot()

Example: Decrypt from cold (no auto-populated credentials)

# 1. Paste SAFE message into decrypt input
browser_type(ref=<safe-message-ref>, text="-----BEGIN SAFE UNLOCK-----\n...")

# 2. Add credential
browser_click(ref=<add-credential-ref>)        # "Add credential to decryption attempt"
browser_snapshot()

# 3. Select Password type (default is "Private Key")
browser_select_option(ref=<credential-type-ref>, values=["Password"])
browser_snapshot()

# 4. Enter password
browser_type(ref=<password-ref>, text="my-password")

# 5. Confirm credential
browser_click(ref=<confirm-ref>)               # "Confirm credential"

# 6. Decrypt
browser_click(ref=<decrypt-ref>)               # "Decrypt SAFE message using provided credentials"
browser_snapshot()                              # Output is in "Decrypted plaintext message" textbox

Example: Same-session encrypt→decrypt (auto-populated)

After encrypting, the output auto-populates into the decrypt section. If the matching key is saved in credentials, it auto-adds the private key. Just click Decrypt — no manual credential entry needed.

Programmatic browser automation (standalone scripts):

For non-MCP environments, use Playwright or Puppeteer directly:

# Example with Playwright (Python)
from playwright.sync_api import sync_playwright

with sync_playwright() as p:
    browser = p.chromium.launch()
    page = browser.new_page()
    page.goto('https://thesafe.dev')

    # Generate X25519 keypair
    page.get_by_role("combobox", name="Select key encapsulation mechanism type").select_option("X25519")
    page.get_by_role("button", name="Generate new keypair").click()

    # Encrypt with password
    page.get_by_role("textbox", name="Enter plaintext message to encrypt").fill("secret message")
    page.get_by_role("button", name="Add encryption step to recipient path").click()
    page.get_by_label("Select encryption step type").select_option("Password")
    page.get_by_role("textbox", name="Enter password for encryption step").fill("mypassword")
    page.get_by_role("button", name="Confirm encryption step").click()
    page.get_by_role("button", name="Encrypt plaintext").click()

    # Read encrypted output
    encrypted = page.get_by_label("Encrypted SAFE message output").input_value()

    # Decrypt (message and credentials auto-populate from encrypt)
    page.get_by_role("button", name="Decrypt SAFE message").click()
    decrypted = page.get_by_label("Decrypted plaintext message").input_value()

    print(f"Decrypted: {decrypted}")  # "secret message"
    browser.close()

Multi-Recipient Encryption:

Both the browser UI and CLI support encrypting for multiple recipients. Each recipient can decrypt the message independently using their own credential.

Browser workflow:

1. Configure first recipient in "Recipient 1" (password or public key)
2. Click "+ Add Recipient" button
3. Configure second recipient in "Recipient 2"
4. Repeat for additional recipients (no limit)
5. Click "Encrypt" - message is encrypted once but decryptable by any recipient

How it works:

• Each recipient gets their own UNLOCK block in the SAFE message
• File is encrypted once with a symmetric key
• Symmetric key is wrapped separately for each recipient
• Any recipient can decrypt using their credential (password or private key)
• Recipients cannot see who else has access

CLI multi-recipient examples:

# Encrypt for multiple recipients using -r flag multiple times
safe encrypt -i file.txt -o file.safe -r alice.pub -r bob.pub -r charlie.pub

# Mix recipient types (password + keys)
safe encrypt -i file.txt -o file.safe -p mypassword -r alice.pub -r bob.pub

# Encrypt for GitHub users (fetches public keys from GitHub)
safe encrypt -i file.txt -o file.safe -r github:grittygrease

# Multiple GitHub users
safe encrypt -i file.txt -o file.safe -r github:alice -r github:bob

# Encrypt for GitHub users and a password
safe encrypt -i file.txt -o file.safe -p teampassword -r github:alice -r github:bob

GitHub username recipient (github:username):

• Fetches SSH public keys from https://github.com/{username}.keys
• Automatically converts p-256 and x25519 keys to SAFE format
• Both key types are added as separate recipients if available
• Requires user to have public keys on their GitHub profile
• Error if no keys found: github:username: no keys found

Example output:

$ safe encrypt -i test.txt -o test.safe -r github:grittygrease
# Creates UNLOCK blocks for both p-256 and x25519 keys from GitHub

$ safe info -i test.safe
LOCK Blocks: 2
  [0] hpke(kem=p-256,id=QyLFP/...)
  [1] hpke(kem=x25519,id=r1VeL...)

Agent-to-Agent Communication via GitHub Gist:

Agents can securely exchange encrypted messages using GitHub Gist as a transport layer. This enables asynchronous, persistent communication between agents with different GitHub accounts.

Complete Workflow:

Agent A (Sender):

# 1. Create message for Agent B
echo "Task completed. Results attached." > message.txt

# 2. Encrypt for Agent B's GitHub account
safe encrypt -i message.txt -o message.safe -r github:agentb-username

# 3. Upload encrypted message to public Gist
gh gist create message.safe --desc "Encrypted message for agentb-username" --public

# Output: https://gist.github.com/agenta-username/{gist-id}

Agent B (Receiver):

# Method 1: Direct pipe (simplest, auto-discovers keys)
curl -sL https://gist.github.com/alice/{gist-id}/raw | safe decrypt

# Method 2: Download, inspect, then decrypt
curl -sL https://gist.github.com/alice/{gist-id}/raw > received.safe
safe info -i received.safe  # Verify sender and encryption details
safe decrypt -i received.safe -o message.txt

# Method 3: Explicit key (if auto-discovery doesn't work)
curl -sL https://gist.github.com/alice/{gist-id}/raw | safe decrypt -k ~/.safe/keys/bob.x25519.key

SSH Key Auto-Discovery (SAFE CLI v2.3+):

The SAFE CLI automatically discovers and uses SSH private keys from ~/.ssh/:

• ✅ Ed25519 keys → converted to X25519
• ✅ P-256 ECDSA keys → used directly
• ✅ Unencrypted keys only (passphrase-protected keys silently skipped)
• ✅ Zero configuration - just works if your SSH keys match GitHub public keys

Auto-Discovery Order:

1. ~/.safe/keys/*.key - Native SAFE format keys (checked first)
2. ~/.ssh/* - All SSH private keys in ~/.ssh/ directory
   • Ed25519 keys → converted to X25519
   • P-256 ECDSA keys → used directly

Example Auto-Discovery Output:

$ curl -sL https://gist.github.com/.../raw | safe decrypt
safe: using SSH key ~/.ssh/id_ed25519
safe: trying 3 key(s) (2 native + 1 SSH)
[decrypted message]

Key Requirements:

• Agent B must have private keys that correspond to the public keys on their GitHub profile
• GitHub SSH keys must be added to https://github.com/{username}.keys
• Private keys can be in ~/.safe/keys/ (SAFE format) OR ~/.ssh/ (OpenSSH format)
• Gist can be public (encrypted content is safe) or private for additional obscurity

Multi-Agent Broadcast:

# Encrypt for multiple agents
safe encrypt -i broadcast.txt -o broadcast.safe \
  -r github:agent1 \
  -r github:agent2 \
  -r github:agent3

# Any of the three agents can decrypt independently
gh gist create broadcast.safe --desc "Team update" --public

Agent Identity Setup:

To enable decryption, agents need to set up their GitHub SSH keys and store private keys:

# Option 1: Use existing SSH keys (simplest - zero setup!)
# If you already have ~/.ssh/id_ed25519 or ~/.ssh/id_ecdsa uploaded to GitHub, you're done!
# SAFE CLI auto-discovers SSH keys - no key generation needed

# Option 2: Generate new SSH key and upload to GitHub
ssh-keygen -t ed25519 -f ~/.ssh/id_ed25519 -N "" -C "safe-agent-key"
gh ssh-key add ~/.ssh/id_ed25519.pub --title "SAFE Agent Key"
# Done! SAFE CLI will auto-discover this key

# Option 3: Generate SAFE-native keys (for advanced use cases)
safe keygen x25519 -o agent-id
# Upload agent-id.x25519.pub to https://github.com/settings/keys (manual conversion needed)
mv agent-id.x25519.key ~/.safe/keys/

# Test encryption to self (works with any option above)
safe encrypt -i test.txt -o test.safe -r github:your-username
safe decrypt -i test.safe -o decrypted.txt
# With SSH keys, decryption auto-discovers your keys from ~/.ssh/

Browser-Based Agent Workflow:

Agents using thesafe.dev have full GitHub support for both encryption and decryption.

Encrypt to a GitHub user (browser):

1. Go to the ENCRYPT tab
2. Enter your message
3. Click ADD FACTOR → NEW FACTOR → select GITHUB
4. Enter the GitHub username (e.g., smithclay)
5. Click FETCH KEYS — the browser fetches public keys from https://github.com/{username}.keys
6. Click ENCRYPT
7. Copy the output and share via Gist

Decrypt a GitHub-encrypted message (browser):

1. Go to the DECRYPT tab
2. Load the encrypted message: paste text, use the FILE button to upload, or use the URL button to load directly from a Gist URL (e.g., paste the raw Gist URL)
3. Click ADD → GITHUB → enter your GitHub username → click FETCH KEYS (This matches your public keys to the message's LOCK blocks)
4. Click ADD → KEY → paste your SSH private key (from ~/.ssh/id_ed25519 or ~/.ssh/id_ecdsa) — or use the "Import SSH private key from GitHub" button if available
5. Click DECRYPT

Recommended approach for browser-based workflows:

• Both CLI and browser support github:username for encryption equally well
• CLI is simpler for decryption — it auto-discovers SSH keys from ~/.ssh/; browser requires pasting the private key once
• URL button is convenient — load encrypted Gist content directly without curl

Send encrypted output over WebRTC (browser):

The browser supports real-time peer-to-peer transfer of encrypted SAFE messages via WebRTC — no copy-paste required:

Sender:

1. Encrypt your message as usual to produce the encrypted output
2. Click Send in the output toolbar (next to Download, Share, Copy)
3. A dialog appears: "Share join URL, then wait for receiver..."
4. The join URL is offered via the native OS share sheet (if available) or logged in the Log panel
5. Keep the tab open — when the receiver connects, the dialog updates to "Receiver connected. Starting transfer..."
6. Transfer completes automatically

Receiver:

1. Open the join URL: https://thesafe.dev/?session=<id>&token=<token>
2. The page auto-connects, receives the encrypted message, and switches to the Decrypt tab with the message pre-loaded
3. Add credentials and click Decrypt as normal

Notes:

• Join URLs expire after 30 minutes
• Max transfer size: 100 MB
• Sender must keep the tab open until the receiver connects
• Share (separate button) shares the file or text directly with no server involved; Send is the WebRTC real-time peer flow

Agent Ping/Notification Workflow:

You can "ping" another agent using their GitHub username without needing their public key in advance:

# Alice pings Bob (discovers keys automatically via github:username)
echo "PING: Status update requested" > ping.txt
safe encrypt -i ping.txt -o ping.safe -r github:bob
gh gist create ping.safe --desc "Ping from Alice" --public

# Bob discovers the ping and decrypts (SSH key auto-discovery!)
curl -sL https://gist.github.com/alice/{gist-id}/raw | safe decrypt
# safe: using SSH key ~/.ssh/id_ed25519
# safe: trying 1 key(s) (0 native + 1 SSH)
# PING: Status update requested

# Bob responds back to Alice
echo "PONG: Status OK, task 75% complete" > pong.txt
safe encrypt -i pong.txt -o pong.safe -r github:alice
gh gist create pong.safe --desc "Response to Alice" --public

Key Benefits:

• ✅ No prior key exchange needed - github:username fetches public keys automatically
• ✅ No key management needed - reuse existing SSH keys from GitHub
• ✅ Works instantly if you already have SSH keys on GitHub
• ✅ Works for any GitHub user with public SSH keys on their profile
• ✅ Both agents can initiate communication
• ✅ Asynchronous - sender doesn't need to wait for response
• ✅ Persistent - messages remain in Gist until deleted

Discovery Methods:

• GitHub Gist notifications (if agent watches their own Gists)
• Periodic polling of GitHub API for new Gists mentioning their username
• GitHub webhooks for real-time notifications
• RSS feeds for public Gists

Security Notes:

• Gist URLs are discoverable if public - use private Gists for sensitive coordination
• Encrypted content is safe even if Gist is public (only recipient has private key)
• Gist history is immutable - deleted messages remain in Git history
• Use short-lived Gists and delete after confirmation for ephemeral communication
• Multi-recipient encryption prevents sender from knowing who decrypted the message

CLI vs Browser: Feature Comparison

Recommendation:

• Encryption: Both CLI and browser support github:username equally well
• Decryption: CLI is easier (auto-discovers SSH keys); browser requires pasting your private key
• Best of both: Use browser for encryption, CLI for decryption when available

Keychain management:

The Keychain section (04) supports:

• Add Credential (dropdown menu with options):
  • Import Key: Import an existing public or private key (PEM or base64)
  • New Passkey: Create a new WebAuthn passkey (requires browser/OS authenticator, prompts for label)
  • New Password: Add a new password for encryption/decryption
  • Existing Passkey: Use an existing passkey from your authenticator
• Export: Export keychain as encrypted SAFE backup (password-protected .safe file containing private keys in PEM format)
• Import: Import a previously exported keychain backup (file upload + passphrase)
• Clear All: Delete all keychain entries (shows a confirm dialog)

Passkey Limitations for Automation:

• Passkey creation requires WebAuthn hardware interaction (biometric, security key, etc.)
• Cannot be fully automated - requires user interaction with authenticator
• Dialog prompts for "Passkey label" before creation
• Best suited for interactive sessions, not headless automation

Generated keys are automatically saved here. Each key shows its type and Key ID hints, with Enc/Dec/Share/PUB/PRIV/Label/Del action buttons.

Export/Import workflow (for persisting keys across sessions):

Export:

1. Click "Export credentials as encrypted backup" → dialog appears
2. Enter passphrase + confirm passphrase → click OK
3. Downloads safe-credentials-backup.safe (a standard SAFE file, pwd-encrypted)
4. The export contains private keys only (PEM format). Public keys are derived on re-import.

Import:

1. Click "Import" → file chooser appears (use browser_file_upload with MCP)
2. Select the .safe backup file → passphrase dialog appears
3. Enter passphrase → click OK
4. Keys are restored with full functionality (Enc/Dec/PUB/PRIV buttons)
5. Duplicates are automatically skipped

The exported .safe file is CLI-compatible: safe decrypt safe-credentials-backup.safe -p "passphrase" reveals the PEM keys.

Agent Session Persistence (Browser Workflow)

Agents can maintain a persistent identity across browser sessions by saving and re-uploading the keychain backup:

First browser session:

1. Navigate to https://thesafe.dev
2. Generate keys (Section 01) or receive keys from other agents
3. Export keychain: Click "Export" → enter passphrase → download safe-credentials-backup.safe
4. Save the encrypted backup file to persistent storage (filesystem, database, cloud storage, etc.)
5. Store the passphrase securely (environment variable, secure key store, etc.)

New browser session (different browser, incognito, new tab, etc.):

1. Navigate to https://thesafe.dev
2. Import keychain: Click "Import" → upload safe-credentials-backup.safe → enter passphrase
3. All keys are restored with full functionality (Enc/Dec/PUB/PRIV/Share/Label/Del)
4. Agent can immediately encrypt/decrypt using saved keys

Benefits:

• Agents maintain the same cryptographic identity across sessions
• No need to regenerate keys or re-exchange public keys with other agents
• Encrypted communication history remains accessible
• Works across different browsers, devices, and environments

Security notes:

• The backup file is encrypted with the passphrase (argon2id by default)
• File is CLI-compatible: safe decrypt safe-credentials-backup.safe -p "passphrase"
• Store the passphrase separately from the backup file
• Backup contains only private keys in PEM format; public keys are derived on import

Example workflow with MCP Playwright:

# First session: Export keychain
browser_click(ref=<export-button-ref>)  # "Export keychain"
# Enter passphrase in dialog
browser_type(ref=<passphrase-ref>, text="agent-secret-passphrase")
browser_type(ref=<confirm-passphrase-ref>, text="agent-secret-passphrase")
browser_click(ref=<ok-ref>)
# File downloads as safe-credentials-backup.safe
# Save this file to persistent storage

# New session: Import keychain
browser_navigate(url="https://thesafe.dev")
browser_click(ref=<import-button-ref>)  # "Import keychain backup"
browser_file_upload(paths=["/path/to/safe-credentials-backup.safe"])
# Enter passphrase in dialog
browser_type(ref=<passphrase-ref>, text="agent-secret-passphrase")
browser_click(ref=<ok-ref>)
# All keys restored, agent can now encrypt/decrypt

This enables agents to maintain cryptographic identities across:

• Browser restarts
• Incognito/private browsing sessions
• Different physical machines
• Cloud-based agent deployments

When to use the web interface:

• CLI can't be installed (no Go/Rust, restricted environment, sandboxed IDE)
• No shell access (browser-only agent, web-based coding environment)
• One-off encryption/decryption tasks
• Testing SAFE format without installing dependencies
• Quick key generation or format exploration

When to prefer the CLI:

• Production systems or automated pipelines
• Batch or high-volume operations (CLI is significantly faster)
• Air-gapped or offline environments
• Scripting with shell pipes and file I/O

Quick Reference

Key Storage Convention

Personal keys are stored in ~/.safe/ (similar to ~/.ssh/). The CLI manages this directory automatically:

safe keygen x25519                     # Generates keypair, auto-stores to ~/.safe/
safe keygen x25519 -n alice            # Named identity "alice"
safe keys                              # List all identities and recipients

Key Discovery Order (SAFE CLI v2.3+):

1. ~/.safe/keys/*.key - SAFE-native keys (checked first)
2. ~/.ssh/* - All SSH private keys in ~/.ssh/ directory
   • Ed25519 keys → auto-converted to X25519
   • P-256 ECDSA keys → used directly

Note: You can use EITHER format - SSH keys from GitHub work with zero configuration!

Directory structure (auto-created by safe keygen):

• ~/.safe/keys/ — Private keys (0700, never share). E.g., nick.x25519.key
• ~/.safe/*.pub — Your own public keys (safe to share). E.g., nick.x25519.pub
• ~/.safe/recipients/ — Other people's public keys (managed by safe keys add)

Override with SAFE_HOME env var. Fallback: ./.safe/ in current directory.

Generate Keys

By default, keygen uses $USER as the identity name and stores keys in ~/.safe/. Override with -n name or -o path.

safe keygen x25519                     # ~/.safe/keys/$USER.x25519.key + ~/.safe/$USER.x25519.pub
safe keygen x25519 -n alice            # ~/.safe/keys/alice.x25519.key + ~/.safe/alice.x25519.pub
safe keygen ml-kem-768                 # Generates seed (compact format, default for ML-KEM)
safe keygen ml-kem-768 -no-seed        # Raw keypair instead of seed
safe keygen x25519 -o /tmp/throwaway   # Custom output path
safe keygen x25519 -force              # Overwrite existing files

Output: <name>.<type>.pub (share this) and <name>.<type>.key (keep secret). Public key is always written to ~/.safe/.

Manage Keys

# List all identities and known recipients
safe keys

# Import a recipient's public key
safe keys add alice.x25519.pub --name alice

# Remove a recipient
safe keys remove alice

# Derive public key from private key (by name or path)
safe pubkey alice                       # Looks up ~/.safe/keys/alice.*.key
safe pubkey /path/to/key.key            # Direct file path

# View key details
safe keyinfo alice.x25519.pub

Bare names work as recipients after import: safe encrypt data.txt -r alice resolves from ~/.safe/recipients/. Also resolves system users: -r bob checks ~bob/.safe/*.pub.

Encrypt

stdin is the default input, stdout is the default output. Positional argument sets input file.

# Password-protect a file
safe encrypt secrets.txt -o secrets.safe -p "strong-password"

# Encrypt to recipient (bare name or key file)
safe encrypt file.txt -o file.safe -r alice

# Multiple recipients (OR - any one can decrypt)
safe encrypt file.txt -o file.safe -r alice -r bob

# Two-factor: password AND key required (+ is AND separator)
safe encrypt file.txt -o file.safe -r "pwd:secret + alice.pub"

# Pipe from stdin (default)
echo "secret" | safe encrypt -p "pw" > msg.safe

# Password from environment variable
safe encrypt file.txt -o file.safe -p env:MY_PASSWORD

# PBKDF2 instead of argon2id
safe encrypt file.txt -o file.safe -p "pw" --kdf pbkdf2

Decrypt

stdin is the default input, stdout is the default output. If no credentials are provided, keys from ~/.safe/keys/ are tried automatically.

# With password
safe decrypt file.safe -p "password"

# With private key
safe decrypt file.safe -k alice.x25519.key

# Auto-discover keys (no -k needed if keys are in ~/.safe/keys/)
safe decrypt file.safe

# age-compatible --identity flag
safe decrypt file.safe --identity alice.key

# Two-factor (all credentials required)
safe decrypt file.safe -o file.txt -p "secret" -k alice.key

# Write to file instead of stdout
safe decrypt file.safe -o plaintext.txt -p "password"

# Password from environment variable
safe decrypt file.safe -p env:MY_PASSWORD

Info

Inspect a SAFE file's metadata without credentials:

safe info file.safe
# Output:
#   AEAD: aes-256-gcm
#   Block Size: 65536
#   Key Hash: spki-sha256-16
#   Data size: 1048 bytes
#   UNLOCK Blocks: 2
#     [0] pwd(argon2id)
#     [1] hpke(kem=x25519, id=r3YlsKxQHj1q1d/kKi5e3Q==)

# From stdin
cat file.safe | safe info

Piping (stdin/stdout)

stdin and stdout are the defaults — no -i - or -o - needed. All operations are binary-safe.

Default behavior: Always prefer piping over writing intermediate files to disk. This avoids leaving decrypted content on disk and is cleaner.

# Decrypt base64-encoded content (PREFERRED - no temp file)
echo "LS0tLS1CRUdJTi..." | base64 -d | safe decrypt -k ~/.safe/keys/id.x25519.key

# AVOID: Writing intermediate files
# echo "LS0tLS1CRUdJTi..." | base64 -d > /tmp/file.safe && safe decrypt /tmp/file.safe ...

# Basic stdin/stdout
echo "secret" | safe encrypt -p "pw" > encrypted.safe
cat encrypted.safe | safe decrypt -p "pw"

# Chain operations (re-encrypt with different key)
safe decrypt a.safe -p "pw1" | safe encrypt -o b.safe -p "pw2"

# Encrypt with compression
tar cz src/ | safe encrypt -o backup.safe -r alice

# Decrypt and decompress
safe decrypt backup.safe -k team.key | tar xz

# Decrypt remote file
curl -s https://example.com/data.safe | safe decrypt -k my.key

# Pipe through compression then encrypt
safe encrypt -p "pw" < large.bin | gzip > encrypted.safe.gz

# Decrypt gzipped safe file
gunzip -c encrypted.safe.gz | safe decrypt -p "pw" > large.bin

Note: -i - and -o - still work for explicit stdin/stdout but are no longer required.

Common Use Cases

Protect API Keys / .env Files

safe encrypt .env -o .env.safe -p "dev-password"
safe encrypt credentials.json -o credentials.safe -r ops-team

Share Secrets with a Teammate

# They generate their key
safe keygen x25519 -n teammate

# You import their public key
safe keys add teammate.x25519.pub --name teammate

# You encrypt for them (bare name!)
safe encrypt api-keys.txt -o api-keys.safe -r teammate

# They decrypt (auto-discovers keys from ~/.safe/keys/)
safe decrypt api-keys.safe -o api-keys.txt

Encrypt Backup Before Cloud Upload

tar czf backup.tar.gz ~/Documents
safe encrypt backup.tar.gz -o backup.safe -p "backup-phrase" -r recovery
# Upload backup.safe to S3/GCS/Dropbox

Encrypt Entire Directories

# Encrypt a folder
tar cz project/ | safe encrypt -o project.safe -r team

# Decrypt and extract
safe decrypt project.safe -k team.key | tar xz

Git-Friendly Encrypted Secrets

# Encrypt secrets, commit the .safe file
safe encrypt .env.production -o .env.production.safe -r deploy
git add .env.production.safe  # Safe to commit

# On deploy server (auto-discovers deploy key from ~/.safe/keys/)
safe decrypt .env.production.safe -o .env.production

Separation of Duties (Two People Required)

# Encrypt requiring BOTH Alice and Bob (+ is AND)
safe encrypt codes.txt -o codes.safe -r "alice.pub + bob.pub"

# Decrypt (both must provide keys)
safe decrypt codes.safe -o codes.txt -k alice.key -k bob.key

Two-Factor Encryption (Password + Key)

# Encrypt: requires password AND key
safe encrypt secrets.txt -o secrets.safe -r "pwd:mypassword + hardware.pub"

# Decrypt: must provide both
safe decrypt secrets.safe -o secrets.txt -p "mypassword" -k hardware.key

Team Encryption + Emergency Backup

safe encrypt secrets.txt -o secrets.safe \
  -r alice -r bob -r carol \
  -p "emergency-recovery-phrase"

Post-Quantum Hybrid Protection

# Generate both classical and PQ keys
safe keygen x25519 -n alice
safe keygen ml-kem-768 -n alice

# Encrypt with both (future-proof against quantum computers)
safe encrypt data.txt -o data.safe \
  -r "pwd:phrase + alice.x25519.pub + alice.ml-kem-768.pub"

Temporary Decryption (No File on Disk)

# Use decrypted content without writing to disk
./my-app --config <(safe decrypt config.safe -p "pw")

# Compare two encrypted files
diff <(safe decrypt old.safe -p pw) <(safe decrypt new.safe -p pw)

Password Rotation

# Change password without re-encrypting data
safe unlock replace secrets.safe -p "old-password" \
  --index 0 --recipient "pwd:new-password"

Key Rotation (Compromised Key)

# View current recipients
safe info secrets.safe

# Remove compromised key, add new one
safe unlock remove secrets.safe -k admin.key --index 2
safe unlock add secrets.safe -k admin.key --recipient new-employee.pub

Composable Paths (AND vs OR Logic)

Multiple -r or -p flags = OR (any one works) + within one -r = AND (all required)

Note: -> is deprecated but still works. Use + for new code.

Editing Encryp

…(truncated)