Tator Trader

Tator AI Trading API

What You Probably Got Wrong

Tator returns UNSIGNED transactions. You tell Tator what you want to do in plain English, Tator figures out the contracts/routes/parameters, and returns a transaction for YOU to sign. You keep full custody — Tator never touches your keys.

$0.20 per request, not per trade. One natural language prompt = one payment. If you ask to "buy ETH and then swap half for USDC", that's one request, one payment, potentially multiple transactions returned.

This is NOT a swap aggregator. Tator is an AI that understands trading intent. It handles complex operations like "bridge 100 USDC to Arbitrum and swap for ARB" that would normally require multiple manual steps.

Security Model

Tator is a transaction builder, not a custodian. Understanding the trust boundaries is critical:

What Tator CAN do

• Construct unsigned transactions based on your natural language prompt
• Return transaction calldata, target addresses, and values for you to review
• Charge $0.20 USDC via x402 for the computation

What Tator CANNOT do

• Access your private keys (they never leave your wallet)
• Execute transactions on your behalf (YOU sign and broadcast)
• Move funds without your explicit signature
• Access tokens you haven't approved in a signed transaction

What YOU must do

• NEVER paste private keys, seed phrases, or wallet credentials into any prompt. Tator only needs your PUBLIC wallet address.
• Inspect every returned transaction before signing. See the Transaction Verification Checklist below.
• Use a hardware wallet or trusted wallet extension for signing. This adds a physical confirmation step that no software can bypass.
• Start small. Test with trivial amounts before executing large trades.

Trust Boundary

┌─────────────────────────────────────────────────────┐
│  YOUR SIDE (you control)                            │
│                                                     │
│  • Private keys (never shared)                      │
│  • Transaction review (before signing)              │
│  • Signing decision (your wallet, your choice)      │
│  • Broadcasting (you submit to the network)         │
│                                                     │
├─────────────────────────────────────────────────────┤
│  TATOR'S SIDE (external service)                    │
│                                                     │
│  • Interprets your natural language prompt           │
│  • Constructs unsigned transaction calldata          │
│  • Returns transactions for your review              │
│  • Charges $0.20 via x402 payment protocol           │
│                                                     │
│  Tator NEVER receives your private key.              │
│  Tator CANNOT execute without your signature.        │
└─────────────────────────────────────────────────────┘

Who Operates This

Tator's endpoint (x402.quickintel.io) is operated by Quick Intel LLC, a registered US based cryptocurrency security company. The same infrastructure serves over 50 million token security scans across 40+ blockchain networks and provides APIs to platforms including DexTools, DexScreener, and Tator Trader. More information: quickintel.io

Bottom line: The worst Tator can do is return a bad transaction. The worst YOU can do is sign it without checking. Always verify before you sign.

Overview

Free Endpoints (No x402 Payment)

Supported Chains (24)

Capabilities

Core Trading

Transfers

Bridging

Perpetuals (Avantis - Base)

Prediction Markets (Myriad)

Token Launching

Name Registration

Yield / DeFi

Pre-Flight Checks

1. USDC Balance on a Supported Payment Chain

You need at least $0.20 USDC on any supported payment chain. Base is recommended for EVM (lowest fees), Solana is also supported.

// EVM (Base)
const USDC_BASE = "0x833589fCD6eDb6E08f4c7C32D4f71b54bdA02913";
const balance = await usdcContract.balanceOf(walletAddress);
const hasEnough = balance >= 200000n; // $0.20 with 6 decimals

2. Sufficient Funds for Trade

Tator will return an error if you try to trade more than you have. Check your balance for the token you're trading BEFORE calling Tator.

How x402 Payment Works

x402 is an HTTP-native payment protocol. Here's the complete flow:

EVM Payment Flow (Base, Ethereum, Arbitrum, etc.)

┌─────────────────────────────────────────────────────────────┐
│  1. REQUEST    POST to endpoint with trade prompt           │
│                                                             │
│  2. 402        Server returns "Payment Required"            │
│                PAYMENT-REQUIRED header contains payment info │
│                                                             │
│  3. SIGN       Your wallet signs EIP-3009 authorization     │
│                (transferWithAuthorization for USDC)          │
│                                                             │
│  4. RETRY      Resend request with PAYMENT-SIGNATURE header │
│                Contains base64-encoded signed payment proof  │
│                                                             │
│  5. SETTLE     Server verifies signature, settles on-chain  │
│                                                             │
│  6. RESPONSE   Server returns trade result (200 OK)         │
│                PAYMENT-RESPONSE header contains tx receipt   │
└─────────────────────────────────────────────────────────────┘

Solana (SVM) Payment Flow

┌─────────────────────────────────────────────────────────────┐
│  1. REQUEST    POST to endpoint with trade prompt           │
│                                                             │
│  2. 402        Server returns "Payment Required"            │
│                Solana entry includes extra.feePayer address  │
│                                                             │
│  3. BUILD      Build SPL TransferChecked transaction:       │
│                - Set feePayer to gateway's facilitator       │
│                - Transfer USDC to gateway's payTo address    │
│                - Partially sign with your wallet             │
│                                                             │
│  4. RETRY      Resend request with PAYMENT-SIGNATURE header │
│                payload: { transaction: "<base64>" }          │
│                                                             │
│  5. SETTLE     Gateway co-signs as feePayer, submits to     │
│                Solana, confirms transaction                  │
│                                                             │
│  6. RESPONSE   Server returns trade result (200 OK)         │
│                PAYMENT-RESPONSE header contains tx signature │
└─────────────────────────────────────────────────────────────┘

x402 v2 Headers

Note: The legacy X-PAYMENT header is also accepted for v1 backward compatibility, but PAYMENT-SIGNATURE is preferred.

⚠️ PAYMENT-SIGNATURE Payload Structure (CRITICAL)

This is the exact structure your PAYMENT-SIGNATURE header must contain after base64 decoding. Getting this wrong is the #1 cause of payment failures.

EVM Payment Payload (Decoded)

{
  "x402Version": 2,
  "scheme": "exact",
  "network": "eip155:8453",
  "payload": {
    "signature": "0x804f6127...1b",
    "authorization": {
      "from": "0xYourWalletAddress",
      "to": "0xPayToAddressFrom402Response",
      "value": "200000",
      "validAfter": "0",
      "validBefore": "1771454085",
      "nonce": "0xa1b2c3d4...bytes32hex"
    }
  }
}

SVM (Solana) Payment Payload (Decoded)

{
  "x402Version": 2,
  "scheme": "exact",
  "network": "solana:5eykt4UsFv8P8NJdTREpY1vzqKqZKvdp",
  "payload": {
    "transaction": "base64-encoded-partially-signed-solana-transaction"
  }
}

Field-by-Field Rules

❌ Common Mistakes That Cause Payment Failures

1. signature nested inside authorization (WRONG)

// ❌ WRONG — causes "Cannot read properties of undefined (reading 'length')"
{
  "payload": {
    "authorization": {
      "from": "0x...",
      "to": "0x...",
      "value": "200000",
      "signature": "0x..."
    }
  }
}

// ✅ CORRECT — signature is a SIBLING of authorization
{
  "payload": {
    "signature": "0x...",
    "authorization": {
      "from": "0x...",
      "to": "0x...",
      "value": "200000"
    }
  }
}

2. Missing x402Version at top level

// ❌ WRONG — missing x402Version
{
  "scheme": "exact",
  "network": "eip155:8453",
  "payload": { ... }
}

// ✅ CORRECT
{
  "x402Version": 2,
  "scheme": "exact",
  "network": "eip155:8453",
  "payload": { ... }
}

3. Using hex or BigInt for value/validAfter/validBefore

// ❌ WRONG — hex strings
{ "value": "0x30D40", "validAfter": "0x0", "validBefore": "0x69A1F3C5" }

// ❌ WRONG — raw numbers (may lose precision)
{ "value": 200000, "validAfter": 0, "validBefore": 1771454085 }

// ✅ CORRECT — decimal strings
{ "value": "200000", "validAfter": "0", "validBefore": "1771454085" }

4. Wrong endpoint path

❌ /v1/tator/api/v1/prompt  (internal backend route — don't use)
✅ /v1/tator/prompt          (correct public endpoint)

Payment-Identifier (Idempotency)

The gateway supports the payment-identifier extension. At $0.20 per request, this is especially important for Tator — if your agent retries on a network timeout, you don't want to pay twice:

const paymentPayload = {
  x402Version: 2,
  scheme: 'exact',
  network: 'eip155:8453',
  payload: { /* ... */ },
  extensions: {
    'payment-identifier': {
      paymentId: 'pay_' + crypto.randomUUID().replace(/-/g, '')
    }
  }
};

If the gateway has already processed a request with the same payment ID, it returns the cached response without charging again. Payment IDs must be 16-128 characters, alphanumeric with hyphens and underscores.

Discovery Endpoint

Query the gateway's accepted payments and schemas before making calls:

GET https://x402.quickintel.io/accepted

Returns all routes, supported payment networks, pricing, and input/output schemas for agent integration.

API Request

POST https://x402.quickintel.io/v1/tator/prompt
Content-Type: application/json

{
  "prompt": "Buy 0.1 ETH worth of PEPE on Base",
  "walletAddress": "0xYourWalletAddress",
  "provider": "your-agent-name"
}

Writing Good Prompts

CRITICAL: Better prompts = better results. You pay $0.20 regardless of outcome.

✅ Good Prompts

"Buy 0.1 ETH worth of PEPE on Base"
→ Clear: amount, token, chain

"Swap 100 USDC for ETH on Arbitrum"
→ Clear: input amount, input token, output token, chain

"Bridge 50 USDC from Base to Arbitrum"
→ Clear: amount, token, source chain, destination chain

"Open 5x long on ETH with 100 USDC collateral on Avantis"
→ Clear: leverage, direction, asset, collateral, protocol

"Buy 0x1234...abcd on Base"
→ Uses contract address for obscure tokens

❌ Bad Prompts

"Buy some crypto"
→ Too vague: which token? which chain? how much?

"Get me PEPE"
→ Missing: chain, amount

"Swap tokens"
→ Missing: which tokens, amounts, chain

"Trade on the best chain"
→ Ambiguous: Tator can't guess preferences

Tips for Best Results

1. Always include the chain — "on Base", "on Arbitrum"
2. Specify amounts — "0.1 ETH", "100 USDC", "all my DEGEN"
3. Use contract addresses for obscure tokens — Many tokens share names
4. Be explicit about direction — "buy X with Y" or "sell X for Y"
5. For bridging — Include source AND destination chain

API Response Types

Type 1: Transaction (Most Common)

{
  "type": "transaction",
  "transactions": [
    {
      "to": "0xContractAddress",
      "data": "0xCalldata...",
      "value": "100000000000000000",
      "chainId": 8453,
      "description": "Buy PEPE with 0.1 ETH on Base"
    }
  ],
  "message": "Transaction ready. Sign and broadcast to complete."
}

You must:

1. Verify each transaction (see Transaction Verification Checklist below)
2. Sign each transaction with your wallet
3. Broadcast to the network
4. Wait for confirmation

Type 2: Info Response

{
  "type": "info",
  "message": "PEPE is currently trading at $0.00001234 on Base. 24h volume: $5.2M.",
  "data": {
    "price": "0.00001234",
    "volume24h": "5200000"
  }
}

Returned when you ask for information, not a trade.

Type 3: Error Response

{
  "type": "error",
  "message": "Insufficient balance. You have 0.05 ETH but need 0.1 ETH.",
  "code": "INSUFFICIENT_BALANCE"
}

Type 4: Multi-Transaction Response

{
  "type": "transaction",
  "transactions": [
    {
      "to": "0xApprovalContract",
      "data": "0x095ea7b3...",
      "value": "0",
      "chainId": 8453,
      "description": "Approve USDC spending"
    },
    {
      "to": "0xSwapContract",
      "data": "0x38ed1739...",
      "value": "0",
      "chainId": 8453,
      "description": "Swap USDC for ETH"
    }
  ],
  "message": "2 transactions required. Execute in order."
}

Verify, then sign and broadcast transactions IN ORDER. Wait for each to confirm before sending the next.

Async Mode

For long-running operations or when you don't want to block:

POST https://x402.quickintel.io/v1/tator/prompt
Content-Type: application/json
PAYMENT-SIGNATURE: <base64-encoded-payment>

{
  "prompt": "Buy 0.1 ETH worth of PEPE on Base",
  "walletAddress": "0xYourWallet",
  "provider": "my-agent",
  "async": true
}

Async Response

{
  "type": "pending",
  "jobId": "job_abc123",
  "message": "Request queued. Poll the jobs endpoint for result."
}

Poll for Result (FREE — no x402 payment required)

GET https://x402.quickintel.io/v1/tator/jobs/job_abc123

Returns the same response format as sync mode once complete. This endpoint is free — you already paid when you submitted the prompt.

⚠️ Transaction Verification Checklist

Every transaction Tator returns should be inspected before signing. This is your last line of defense — a transaction can only move your funds if you sign it.

Quick Checks (Do Every Time)

1. Verify the to address

• For swaps: Should be a known DEX router (Uniswap, SushiSwap, 1inch, etc.)
• For bridges: Should be a known bridge contract (Relay, LiFi, deBridge, etc.)
• For sends: Should be the recipient address YOU specified in your prompt
• For token launches: Should be the Clanker or Pump.fun deployment contract
• Red flag: Unknown to address that doesn't match the expected protocol

2. Verify the value field

• This is the amount of native token (ETH/SOL/etc.) being sent WITH the transaction
• For token swaps using ERC-20s, this should usually be "0" (tokens move via calldata, not value)
• For buying with native ETH, this should match the amount you requested
• Red flag: Unexpectedly large value that doesn't match your prompt

3. Check for approval transactions

• Approvals (function selector 0x095ea7b3) grant a contract permission to spend your tokens
• The spender address should be a known DEX router or protocol contract
• The amount should be reasonable — unlimited approvals (type(uint256).max) are common but carry more risk than exact amounts
• Red flag: Approval to an unknown address, or approval for a token you didn't mention

4. Verify the chainId

• Should match the chain you requested in your prompt
• Red flag: Transaction targeting a different chain than expected

5. Check the description field

• Tator includes a human-readable description of each transaction
• It should align with what you asked for
• Red flag: Description doesn't match your original prompt

Deep Checks (For Large Trades or High-Value Operations)

6. Decode the calldata

• Use openchain.xyz/signatures or 4byte.directory to decode the function selector (first 4 bytes of data)
• Common expected selectors:
  • 0x095ea7b3 — approve(address,uint256)
  • 0x38ed1739 — swapExactTokensForTokens (Uniswap V2)
  • 0x5ae401dc — multicall (Uniswap V3)
  • 0x3593564c — execute (Uniswap Universal Router)
• Red flag: Unrecognized function selector on a high-value transaction

7. Verify contract addresses on a block explorer

• Look up the to address on BaseScan, Etherscan, Arbiscan, etc.
• Check: Is it verified? Is it a known protocol? Does it have significant transaction history?
• Red flag: Unverified contract, no transaction history, or recently deployed with no audit

8. Simulate the transaction

• Use Tenderly, Blocknative, or your wallet's built-in simulation to preview effects before signing
• Shows exactly which tokens move where and what approvals are set
• Red flag: Simulation shows unexpected token transfers or approvals

Automated Verification (For Agents)

If you're building an agent that signs programmatically, implement verification checks before signing:

function verifyTatorTransaction(tx, originalPrompt, expectedChainId) {
  const warnings = [];

  // Check 1: Chain matches what was requested
  if (tx.chainId !== expectedChainId) {
    warnings.push(`CHAIN MISMATCH: Expected ${expectedChainId}, got ${tx.chainId}`);
  }

  // Check 2: Value is reasonable (set your own threshold)
  const MAX_VALUE_WEI = BigInt('1000000000000000000'); // 1 ETH
  if (BigInt(tx.value || '0') > MAX_VALUE_WEI) {
    warnings.push(`HIGH VALUE: ${tx.value} wei exceeds safety threshold`);
  }

  // Check 3: Known contract allowlist
  const KNOWN_ROUTERS = new Set([
    '0x3fc91a3afd70395cd496c647d5a6cc9d4b2b7fad', // Uniswap Universal Router (Base)
    '0x2626664c2603336e57b271c5c0b26f421741e481', // Uniswap V3 Router (Base)
    '0x6131b5fae19ea4f9d964eac0408e4408b66337b5', // Kyberswap (Base)
    // Add other known contracts for your use case
  ]);

  const toAddress = tx.to.toLowerCase();
  if (!KNOWN_ROUTERS.has(toAddress)) {
    warnings.push(`UNKNOWN CONTRACT: ${tx.to} — verify on block explorer before signing`);
  }

  // Check 4: If it's an approval, verify the spender
  if (tx.data?.startsWith('0x095ea7b3')) {
    const spender = '0x' + tx.data.slice(34, 74);
    if (!KNOWN_ROUTERS.has(spender.toLowerCase())) {
      warnings.push(`APPROVAL TO UNKNOWN SPENDER: ${spender} — verify before signing`);
    }
  }

  // Check 5: Description sanity check
  if (tx.description && !tx.description.toLowerCase().includes(
    originalPrompt.split(' ')[0].toLowerCase() // Very basic — improve for production
  )) {
    warnings.push(`DESCRIPTION MISMATCH: "${tx.description}" may not match your intent`);
  }

  return {
    safe: warnings.length === 0,
    warnings
  };
}

// Usage
const result = await tatorResponse.json();
if (result.type === 'transaction') {
  for (const tx of result.transactions) {
    const check = verifyTatorTransaction(tx, originalPrompt, 8453);
    if (!check.safe) {
      console.warn('⚠️ Transaction verification warnings:', check.warnings);
      // Decide: skip, require human approval, or proceed with caution
    }
  }
}

For automated agents: Never enable fully automatic signing without implementing verification checks. A human-in-the-loop confirmation for high-value transactions is strongly recommended.

Wallet Integration Patterns

Pattern 1: Using @x402/fetch (Simplest — Recommended)

The @x402/fetch library handles the entire 402 → sign → retry flow automatically:

import { x402Fetch } from '@x402/fetch';
import { createWallet } from '@x402/evm';
import { ethers } from 'ethers';

const wallet = createWallet(process.env.PRIVATE_KEY);
const provider = new ethers.JsonRpcProvider('https://mainnet.base.org');
const signer = new ethers.Wallet(process.env.PRIVATE_KEY, provider);

// 1. Call Tator API (x402 payment handled automatically)
const response = await x402Fetch('https://x402.quickintel.io/v1/tator/prompt', {
  method: 'POST',
  headers: { 'Content-Type': 'application/json' },
  body: JSON.stringify({
    prompt: 'Buy 0.1 ETH worth of PEPE on Base',
    walletAddress: wallet.address,
    provider: 'my-agent'
  }),
  wallet,
  preferredNetwork: 'eip155:8453'
});

const result = await response.json();

// 2. Verify and handle response
if (result.type === 'transaction') {
  for (const tx of result.transactions) {
    // ALWAYS verify before signing — see Transaction Verification Checklist
    console.log(`Reviewing TX: ${tx.description}`);
    console.log(`  To: ${tx.to} | Value: ${tx.value} | Chain: ${tx.chainId}`);

    const signedTx = await signer.sendTransaction({
      to: tx.to,
      data: tx.data,
      value: tx.value,
      chainId: tx.chainId
    });
    const receipt = await signedTx.wait();
    console.log(`TX confirmed: ${receipt.hash}`);
  }
} else if (result.type === 'info') {
  console.log(result.message);
} else if (result.type === 'error') {
  console.error(`Error: ${result.message}`);
}

Pattern 2: Manual EVM Signing with viem (Full Control)

Complete working example for agents that need manual control over the x402 payment AND trade execution:

import { keccak256, toHex, createPublicClient, createWalletClient, http } from 'viem';
import { privateKeyToAccount } from 'viem/accounts';
import { base } from 'viem/chains';

const TATOR_URL = 'https://x402.quickintel.io/v1/tator/prompt';
const PREFERRED_NETWORK = 'eip155:8453'; // Base

const account = privateKeyToAccount(process.env.PRIVATE_KEY);

// ── Step 1: Hit the endpoint, get 402 with payment requirements ──

const tradeBody = JSON.stringify({
  prompt: 'Buy 0.1 ETH worth of PEPE on Base',
  walletAddress: account.address,
  provider: 'my-agent',
});

const initialRes = await fetch(TATOR_URL, {
  method: 'POST',
  headers: { 'Content-Type': 'application/json' },
  body: tradeBody,
});

if (initialRes.status !== 402) {
  throw new Error(`Expected 402, got ${initialRes.status}`);
}

const paymentRequired = await initialRes.json();

// ── Step 2: Find your preferred network in the accepts array ──

const networkInfo = paymentRequired.accepts.find(
  (a) => a.network === PREFERRED_NETWORK
);
if (!networkInfo) {
  throw new Error(`Network ${PREFERRED_NETWORK} not available`);
}

// ── Step 3: Sign EIP-712 TransferWithAuthorization ──

const nonce = keccak256(toHex(`${Date.now()}-${Math.random()}`));
const validAfter = 0n;
const validBefore = BigInt(Math.floor(Date.now() / 1000) + 3600);

const domain = {
  name: networkInfo.extra.name,       // "USD Coin"
  version: networkInfo.extra.version,  // "2"
  chainId: 8453,
  verifyingContract: networkInfo.asset,
};

const types = {
  TransferWithAuthorization: [
    { name: 'from', type: 'address' },
    { name: 'to', type: 'address' },
    { name: 'value', type: 'uint256' },
    { name: 'validAfter', type: 'uint256' },
    { name: 'validBefore', type: 'uint256' },
    { name: 'nonce', type: 'bytes32' },
  ],
};

const message = {
  from: account.address,
  to: networkInfo.payTo,
  value: BigInt(networkInfo.amount),
  validAfter,
  validBefore,
  nonce,
};

const signature = await account.signTypedData({
  domain,
  types,
  primaryType: 'TransferWithAuthorization',
  message,
});

// ── Step 4: Build the PAYMENT-SIGNATURE payload ──
// CRITICAL: signature is a SIBLING of authorization, not nested inside it.
// CRITICAL: value/validAfter/validBefore must be DECIMAL STRINGS in the payload.

const paymentPayload = {
  x402Version: 2,
  scheme: 'exact',
  network: PREFERRED_NETWORK,
  payload: {
    signature,                         // ← Direct child of payload
    authorization: {                   // ← No signature in here
      from: account.address,
      to: networkInfo.payTo,
      value: networkInfo.amount,                  // Decimal string: "200000"
      validAfter: validAfter.toString(),          // Decimal string: "0"
      validBefore: validBefore.toString(),        // Decimal string
      nonce,                                      // 0x-prefixed bytes32
    },
  },
};

const paymentHeader = Buffer.from(JSON.stringify(paymentPayload)).toString('base64');

// ── Step 5: Retry the request with the payment header ──

const paidRes = await fetch(TATOR_URL, {
  method: 'POST',
  headers: {
    'Content-Type': 'application/json',
    'PAYMENT-SIGNATURE': paymentHeader,
  },
  body: tradeBody,
});

// ── Step 6: Handle the trade response ──

const paymentResponse = paidRes.headers.get('payment-response');
if (paymentResponse) {
  const receipt = JSON.parse(Buffer.from(paymentResponse, 'base64').toString());
  console.log('x402 payment settled:', receipt.txHash);
}

const result = await paidRes.json();

// ── Step 7: Verify and sign the trade transactions ──

if (result.type === 'transaction') {
  const walletClient = createWalletClient({
    account,
    chain: base,
    transport: http('https://mainnet.base.org'),
  });

  for (const tx of result.transactions) {
    // ALWAYS verify before signing — see Transaction Verification Checklist
    console.log(`Reviewing TX: ${tx.description}`);
    console.log(`  To: ${tx.to} | Value: ${tx.value} | Chain: ${tx.chainId}`);

    const txHash = await walletClient.sendTransaction({
      to: tx.to,
      data: tx.data,
      value: BigInt(tx.value || '0'),
      chain: base,
    });
    console.log(`Trade TX sent: ${txHash} — ${tx.description}`);
  }
} else if (result.type === 'error') {
  console.error(`Tator error: ${result.message}`);
}

Pattern 3: Manual EVM Signing with ethers.js (Full Control)

Complete working example using ethers.js v6:

import { ethers } from 'ethers';

const TATOR_URL = 'https://x402.quickintel.io/v1/tator/prompt';
const PREFERRED_NETWORK = 'eip155:8453'; // Base

const provider = new ethers.JsonRpcProvider('https://mainnet.base.org');
const wallet = new ethers.Wallet(process.env.PRIVATE_KEY, provider);

// ── Step 1: Hit the endpoint, get 402 with payment requirements ──

const tradeBody = JSON.stringify({
  prompt: 'Buy 0.1 ETH worth of PEPE on Base',
  walletAddress: wallet.address,
  provider: 'my-agent',
});

const initialRes = await fetch(TATOR_URL, {
  method: 'POST',
  headers: { 'Content-Type': 'application/json' },
  body: tradeBody,
});

if (initialRes.status !== 402) {
  throw new Error(`Expected 402, got ${initialRes.status}`);
}

const paymentRequired = await initialRes.json();

// ── Step 2: Find your preferred network in the accepts array ──

const networkInfo = paymentRequired.accepts.find(
  (a) => a.network === PREFERRED_NETWORK
);
if (!networkInfo) {
  throw new Error(`Network ${PREFERRED_NETWORK} not available`);
}

// ── Step 3: Sign EIP-712 TransferWithAuthorization ──

const nonce = ethers.keccak256(
  ethers.toUtf8Bytes(`${Date.now()}-${Math.random()}`)
);
const validAfter = 0n;
const validBefore = BigInt(Math.floor(Date.now() / 1000) + 3600);

const domain = {
  name: networkInfo.extra.name,        // "USD Coin"
  version: networkInfo.extra.version,   // "2"
  chainId: 8453,
  verifyingContract: networkInfo.asset,
};

const types = {
  TransferWithAuthorization: [
    { name: 'from', type: 'address' },
    { name: 'to', type: 'address' },
    { name: 'value', type: 'uint256' },
    { name: 'validAfter', type: 'uint256' },
    { name: 'validBefore', type: 'uint256' },
    { name: 'nonce', type: 'bytes32' },
  ],
};

const message = {
  from: wallet.address,
  to: networkInfo.payTo,
  value: BigInt(networkInfo.amount),
  validAfter,
  validBefore,
  nonce,
};

const signature = await wallet.signTypedData(domain, types, message);

// ── Step 4: Build the PAYMENT-SIGNATURE payload ──
// CRITICAL: signature is a SIBLING of authorization, not nested inside it.
// CRITICAL: value/validAfter/validBefore must be DECIMAL STRINGS in the payload.

const paymentPayload = {
  x402Version: 2,
  scheme: 'exact',
  network: PREFERRED_NETWORK,
  payload: {
    signature,                         // ← Direct child of payload
    authorization: {                   // ← No signature in here
      from: wallet.address,
      to: networkInfo.payTo,
      value: networkInfo.amount,                  // Decimal string: "200000"
      validAfter: validAfter.toString(),          // Decimal string: "0"
      validBefore: validBefore.toString(),        // Decimal string
      nonce,                                      // 0x-prefixed bytes32
    },
  },
};

const paymentHeader = Buffer.from(JSON.stringify(paymentPayload)).toString('base64');

// ── Step 5: Retry the request with the payment header ──

const paidRes = await fetch(TATOR_URL, {
  method: 'POST',
  headers: {
    'Content-Type': 'application/json',
    'PAYMENT-SIGNATURE': paymentHeader,
  },
  body: tradeBody,
});

// ── Step 6: Handle the trade response ──

const paymentResponse = paidRes.headers.get('payment-response');
if (paymentResponse) {
  const receipt = JSON.parse(
    Buffer.from(paymentResponse, 'base64').toString()
  );
  console.log('x402 payment settled:', receipt.txHash);
}

const result = await paidRes.json();

// ── Step 7: Verify and sign the trade transactions ──

if (result.type === 'transaction') {
  for (const tx of result.transactions) {
    // ALWAYS verify before signing — see Transaction Verification Checklist
    console.log(`Reviewing TX: ${tx.description}`);
    console.log(`  To: ${tx.to} | Value: ${tx.value} | Chain: ${tx.chainId}`);

    const txResponse = await wallet.sendTransaction({
      to: tx.to,
      data: tx.data,
      value: tx.value || '0',
      chainId: tx.chainId,
    });
    const txReceipt = await txResponse.wait();
    console.log(`Trade TX confirmed: ${txReceipt.hash} — ${tx.description}`);
  }
} else if (result.type === 'error') {
  console.error(`Tator error: ${result.message}`);
}

Pattern 4: Solana Wallet (SVM)

import { createSvmClient } from '@x402/svm/client';
import { toClientSvmSigner } from '@x402/svm';
import { wrapFetchWithPayment } from '@x402/fetch';
import { createKeyPairSignerFromBytes } from '@solana/kit';
import { base58 } from '@scure/base';

// Create Solana signer
const keypair = await createKeyPairSignerFromBytes(
  base58.decode(process.env.SOLANA_PRIVATE_KEY)
);
const signer = toClientSvmSigner(keypair);
const client = createSvmClient({ signer });
const paidFetch = wrapFetchWithPayment(fetch, client);

// Call Tator API (x402 payment via Solana USDC)
const response = await paidFetch('https://x402.quickintel.io/v1/tator/prompt', {
  method: 'POST',
  headers: { 'Content-Type': 'application/json' },
  body: JSON.stringify({
    prompt: 'Buy 0.1 ETH worth of PEPE on Base',
    walletAddress: '0xYourEvmWallet',
    provider: 'my-agent'
  })
});

const result = await response.json();
// Verify transactions before signing — see Transaction Verification Checklist

Pattern 5: AgentWallet (frames.ag)

// Step 1: Call Tator through AgentWallet's x402 handler
const tatorResponse = await fetch('https://frames.ag/api/wallets/{username}/actions/x402/fetch', {
  method: 'POST',
  headers: {
    'Authorization': `Bearer ${AGENTWALLET_API_TOKEN}`,
    'Content-Type': 'application/json'
  },
  body: JSON.stringify({
    url: 'https://x402.quickintel.io/v1/tator/prompt',
    method: 'POST',
    body: {
      prompt: 'Swap 100 USDC for ETH on Base',
      walletAddress: agentWalletAddress,
      provider: 'my-agent'
    }
  })
});

const result = await tatorResponse.json();

// Step 2: Verify and broadcast via AgentWallet
if (result.type === 'transaction') {
  for (const tx of result.transactions) {
    // Verify before signing — see Transaction Verification Checklist
    const broadcastResponse = await fetch(
      'https://frames.ag/api/wallets/{username}/actions/send-transaction',
      {
        method: 'POST',
        headers: {
          'Authorization': `Bearer ${AGENTWALLET_API_TOKEN}`,
          'Content-Type': 'application/json'
        },
        body: JSON.stringify({
          chainId: tx.chainId,
          to: tx.to,
          data: tx.data,
          value: tx.value
        })
      }
    );
    const txResult = await broadcastResponse.json();
    console.log(`TX sent: ${txResult.hash}`);
  }
}

Pattern 6: Vincent Wallet (heyvincent.ai)

// Step 1: Call Tator (pay via Vincent)
const paymentAuth = await vincent.createX402Payment({
  network: 'eip155:8453',
  amount: '200000',
  token: '0x833589fCD6eDb6E08f4c7C32D4f71b54bdA02913'
});

const tatorResponse = await fetch('https://x402.quickintel.io/v1/tator/prompt', {
  method: 'POST',
  headers: {
    'Content-Type': 'application/json',
    'PAYMENT-SIGNATURE': paymentAuth.encoded
  },
  body: JSON.stringify({
    prompt: 'Bridge 50 USDC from Base to Arbitrum',
    walletAddress: vincentWalletAddress,
    provider: 'my-agent'
  })
});

const result = await tatorResp

…(truncated)