Layerzero

LayerZero

LayerZero V2 is an immutable, censorship-resistant messaging protocol for cross-chain communication. It enables smart contracts on different blockchains to send arbitrary messages to each other through a modular security stack of Decentralized Verifier Networks (DVNs). The core primitive is the OApp (Omnichain Application) — a contract that inherits OApp.sol and implements _lzSend / _lzReceive to send and receive cross-chain messages through EndpointV2.

What You Probably Got Wrong

AI agents trained before mid-2024 confuse V1 and V2 architecture. These are the critical corrections.

• V2 is NOT V1 — completely different architecture. V1 used LZApp, ILayerZeroEndpoint, and a monolithic oracle+relayer model. V2 uses OApp, EndpointV2, and modular DVNs+Executors. Do NOT import @layerzerolabs/solidity-examples — that is V1. Use @layerzerolabs/oapp-evm for V2.
• OFT burns on source, mints on destination — NOT a lock/mint bridge. The Omnichain Fungible Token standard burns tokens on the source chain and mints equivalent tokens on the destination. For existing ERC-20s that cannot add burn/mint, use OFTAdapter which locks on source and mints an OFT representation on destination.
• DVNs replace the V1 oracle+relayer model. V1 had a single Oracle and Relayer operated by LayerZero Labs. V2 decouples verification into configurable DVN sets — you choose which DVNs must verify your messages and set quorum thresholds.
• _lzSend requires proper fee estimation via quoteSend() or _quote(). You must call the quote function first to determine the exact MessagingFee (native + lzToken), then pass that fee as msg.value. Underpaying reverts.
• Peer addresses must be set on BOTH chains. Calling setPeer(dstEid, bytes32(peerAddress)) on chain A is not enough. You must also call setPeer(srcEid, bytes32(chainAAddress)) on chain B. Unset peers cause NoPeer reverts.
• Message ordering is NOT guaranteed unless you configure ordered delivery. V2 delivers messages in a nonce-based system, but by default the executor can deliver messages out of order. Use the OrderedNonce enforcement option if strict ordering matters.
• eid (Endpoint ID) is NOT the chain ID. LayerZero uses its own Endpoint ID system. Ethereum mainnet is eid 30101, Arbitrum is 30110, Base is 30184, Optimism is 30111, Polygon is 30109. Using chain IDs instead of eids is the most common integration mistake.
• Peer addresses are bytes32, not address. All peer addresses are stored as bytes32 to support non-EVM chains. For EVM addresses, left-pad with zeros: bytes32(uint256(uint160(addr))). Passing a raw address to setPeer will fail.
• The Executor is separate from DVNs. DVNs verify messages, but the Executor actually calls lzReceive on the destination. You can configure a custom Executor or use the LayerZero default. If you set gas limits too low in message options, the Executor will run out of gas on the destination.

Quick Start

Installation

npm install @layerzerolabs/oapp-evm @layerzerolabs/lz-evm-protocol-v2 @openzeppelin/contracts

For Foundry projects:

forge install LayerZero-Labs/LayerZero-v2

Minimal OApp Contract

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.22;

import {OApp, Origin, MessagingFee} from "@layerzerolabs/oapp-evm/contracts/oapp/OApp.sol";
import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";

contract MyOApp is OApp {
    event MessageSent(uint32 dstEid, bytes payload, uint256 nativeFee);
    event MessageReceived(uint32 srcEid, bytes32 sender, bytes payload);

    constructor(
        address _endpoint,
        address _delegate
    ) OApp(_endpoint, _delegate) Ownable(_delegate) {}

    /// @notice Sends a message to a destination chain
    /// @param _dstEid Destination endpoint ID
    /// @param _payload Arbitrary bytes payload
    /// @param _options Message execution options (gas, value)
    function sendMessage(
        uint32 _dstEid,
        bytes calldata _payload,
        bytes calldata _options
    ) external payable {
        MessagingFee memory fee = _quote(_dstEid, _payload, _options, false);
        if (msg.value < fee.nativeFee) revert InsufficientFee(msg.value, fee.nativeFee);

        _lzSend(_dstEid, _payload, _options, fee, payable(msg.sender));

        emit MessageSent(_dstEid, _payload, fee.nativeFee);
    }

    /// @notice Quotes the fee for sending a message
    /// @param _dstEid Destination endpoint ID
    /// @param _payload Arbitrary bytes payload
    /// @param _options Message execution options
    /// @return fee The messaging fee breakdown
    function quote(
        uint32 _dstEid,
        bytes calldata _payload,
        bytes calldata _options
    ) external view returns (MessagingFee memory fee) {
        return _quote(_dstEid, _payload, _options, false);
    }

    /// @dev Called by EndpointV2 when a message arrives from a source chain
    function _lzReceive(
        Origin calldata _origin,
        bytes32 /*_guid*/,
        bytes calldata _payload,
        address /*_executor*/,
        bytes calldata /*_extraData*/
    ) internal override {
        emit MessageReceived(_origin.srcEid, _origin.sender, _payload);
    }

    error InsufficientFee(uint256 sent, uint256 required);
}

Client Setup (TypeScript)

import { createPublicClient, createWalletClient, http, parseAbi, type Address } from "viem";
import { privateKeyToAccount } from "viem/accounts";
import { mainnet } from "viem/chains";

const publicClient = createPublicClient({
  chain: mainnet,
  transport: http(process.env.RPC_URL),
});

const account = privateKeyToAccount(
  process.env.PRIVATE_KEY as `0x${string}`
);

const walletClient = createWalletClient({
  account,
  chain: mainnet,
  transport: http(process.env.RPC_URL),
});

Core Concepts

Architecture Overview

Source Chain                          Destination Chain
+-----------+                        +-----------+
|  Your     |  _lzSend()             |  Your     |
|  OApp     | -----> EndpointV2      |  OApp     |
+-----------+        |               +-----------+
                     |                     ^
                     v                     | lzReceive()
              +------------+         +------------+
              |  MessageLib |         | EndpointV2 |
              +------------+         +------------+
                     |                     ^
                     v                     |
              +------+------+        +-----+-----+
              | DVN 1 | DVN 2|       | Executor  |
              +------+------+        +-----------+
                     |                     ^
                     +---------------------+
                     (off-chain verification & relay)

OApp

The base contract for all cross-chain applications. Inherits from OAppSender and OAppReceiver. Manages peer addresses and delegates message send/receive through EndpointV2.

OFT (Omnichain Fungible Token)

An ERC-20 that natively supports cross-chain transfers. Burns on source, mints on destination. For existing tokens, OFTAdapter wraps them.

ONFT (Omnichain Non-Fungible Token)

ERC-721 that supports cross-chain transfers. Locks on source, mints on destination.

EndpointV2

The immutable on-chain entry point. One per chain. Handles message dispatching, DVN verification, and executor relay. Cannot be upgraded.

DVN (Decentralized Verifier Network)

Off-chain verifiers that attest to cross-chain message validity. Each OApp configures which DVNs must verify its messages. Multiple DVNs can be required for higher security.

Executor

Calls lzReceive() on the destination contract. The default LayerZero Executor is used unless overridden. Executors are paid via the messaging fee.

MessageLib

Handles message serialization, DVN verification, and nonce tracking. V2 uses UltraLightNodeV2 (ULN302) as the default send/receive library.

OApp Development

Sending Messages

// _lzSend is inherited from OAppSender
function _lzSend(
    uint32 _dstEid,          // destination endpoint ID
    bytes memory _message,    // encoded payload
    bytes memory _options,    // execution options (gas, value)
    MessagingFee memory _fee, // fee from _quote()
    address payable _refundAddress
) internal returns (MessagingReceipt memory receipt);

The full send flow:

function sendPing(uint32 _dstEid) external payable {
    bytes memory payload = abi.encode("ping", block.timestamp);

    // Build options: 200k gas for lzReceive on destination
    bytes memory options = OptionsBuilder.newOptions().addExecutorLzReceiveOption(200_000, 0);

    MessagingFee memory fee = _quote(_dstEid, payload, options, false);
    if (msg.value < fee.nativeFee) revert InsufficientFee(msg.value, fee.nativeFee);

    _lzSend(_dstEid, payload, options, fee, payable(msg.sender));
}

Receiving Messages

// Override _lzReceive to handle incoming messages
function _lzReceive(
    Origin calldata _origin,   // srcEid, sender (bytes32), nonce
    bytes32 _guid,             // globally unique message ID
    bytes calldata _payload,   // the message bytes
    address _executor,         // executor that delivered this
    bytes calldata _extraData  // additional data from executor
) internal override {
    (string memory message, uint256 timestamp) = abi.decode(_payload, (string, uint256));
    // Process the message
}

Peer Configuration

Peers must be set bidirectionally. The peer address is bytes32-encoded.

// On Ethereum OApp — register Arbitrum peer
oapp.setPeer(
    30110, // Arbitrum eid
    bytes32(uint256(uint160(arbitrumOAppAddress)))
);

// On Arbitrum OApp — register Ethereum peer
oapp.setPeer(
    30101, // Ethereum eid
    bytes32(uint256(uint160(ethereumOAppAddress)))
);

From TypeScript:

const oappAbi = parseAbi([
  "function setPeer(uint32 eid, bytes32 peer) external",
]);

function addressToBytes32(addr: Address): `0x${string}` {
  return `0x${addr.slice(2).padStart(64, "0")}` as `0x${string}`;
}

const { request } = await publicClient.simulateContract({
  address: ethereumOApp,
  abi: oappAbi,
  functionName: "setPeer",
  args: [30110, addressToBytes32(arbitrumOApp)],
  account: account.address,
});

const hash = await walletClient.writeContract(request);
const receipt = await publicClient.waitForTransactionReceipt({ hash });
if (receipt.status !== "success") throw new Error("setPeer reverted");

OFT (Omnichain Fungible Token)

Deploy a New OFT

For new tokens that do not already exist on any chain:

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.22;

import {OFT} from "@layerzerolabs/oft-evm/contracts/OFT.sol";
import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";

contract MyToken is OFT {
    constructor(
        string memory _name,
        string memory _symbol,
        address _lzEndpoint,
        address _delegate
    ) OFT(_name, _symbol, _lzEndpoint, _delegate) Ownable(_delegate) {
        // Mint initial supply to deployer
        _mint(_delegate, 1_000_000 * 10 ** decimals());
    }
}

OFTAdapter for Existing ERC-20s

If an ERC-20 already exists and cannot be modified, deploy OFTAdapter on the token's home chain. It locks the original token and coordinates minting on remote chains.

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.22;

import {OFTAdapter} from "@layerzerolabs/oft-evm/contracts/OFTAdapter.sol";
import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";

contract MyTokenAdapter is OFTAdapter {
    constructor(
        address _token,       // existing ERC-20 address
        address _lzEndpoint,
        address _delegate
    ) OFTAdapter(_token, _lzEndpoint, _delegate) Ownable(_delegate) {}
}

Sending OFT Cross-Chain

const oftAbi = parseAbi([
  "function send((uint32 dstEid, bytes32 to, uint256 amountLD, uint256 minAmountLD, bytes extraOptions, bytes composeMsg, bytes oftCmd) calldata sendParam, (uint256 nativeFee, uint256 lzTokenFee) calldata fee, address refundAddress) payable returns ((bytes32 guid, uint64 nonce, (uint256 nativeFee, uint256 lzTokenFee) fee) receipt)",
  "function quoteSend((uint32 dstEid, bytes32 to, uint256 amountLD, uint256 minAmountLD, bytes extraOptions, bytes composeMsg, bytes oftCmd) calldata sendParam, bool payInLzToken) view returns ((uint256 nativeFee, uint256 lzTokenFee) fee)",
]);

const DST_EID = 30110; // Arbitrum
const AMOUNT = 1000_000000000000000000n; // 1000 tokens (18 decimals)

const sendParam = {
  dstEid: DST_EID,
  to: addressToBytes32(account.address),
  amountLD: AMOUNT,
  minAmountLD: (AMOUNT * 995n) / 1000n, // 0.5% slippage
  extraOptions: "0x" as `0x${string}`,
  composeMsg: "0x" as `0x${string}`,
  oftCmd: "0x" as `0x${string}`,
};

// Quote the fee
const fee = await publicClient.readContract({
  address: oftAddress,
  abi: oftAbi,
  functionName: "quoteSend",
  args: [sendParam, false],
});

// Execute the send
const { request } = await publicClient.simulateContract({
  address: oftAddress,
  abi: oftAbi,
  functionName: "send",
  args: [sendParam, fee, account.address],
  value: fee.nativeFee,
  account: account.address,
});

const hash = await walletClient.writeContract(request);
const receipt = await publicClient.waitForTransactionReceipt({ hash });
if (receipt.status !== "success") throw new Error("OFT send reverted");

OFT Shared Decimals

OFT uses a concept of "shared decimals" to normalize precision across chains. The default shared decimals is 6. Tokens with more than 6 decimals will have dust removed during transfers.

Local Decimals: 18 (standard ERC-20)
Shared Decimals: 6 (LayerZero default)
Dust removed: 12 decimal places

Sending 1.123456789012345678 tokens
Actually transferred: 1.123456000000000000 tokens
Dust lost: 0.000000789012345678 tokens

Override sharedDecimals() to change this behavior:

function sharedDecimals() public pure override returns (uint8) {
    return 8; // higher precision cross-chain
}

DVN & Security Configuration

Setting Required and Optional DVNs

Each OApp configures its security stack through the EndpointV2's delegate (typically the OApp owner).

import {SetConfigParam} from "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/IMessageLibManager.sol";

struct UlnConfig {
    uint64 confirmations;         // block confirmations before DVN can verify
    uint8 requiredDVNCount;       // DVNs that MUST verify (all required)
    uint8 optionalDVNCount;       // DVNs from optional pool
    uint8 optionalDVNThreshold;   // how many optional DVNs must verify
    address[] requiredDVNs;       // addresses of required DVNs
    address[] optionalDVNs;       // addresses of optional DVNs
}

Example configuration — require LayerZero Labs DVN and one of two optional DVNs:

UlnConfig memory ulnConfig = UlnConfig({
    confirmations: 15,                  // 15 block confirmations
    requiredDVNCount: 1,
    optionalDVNCount: 2,
    optionalDVNThreshold: 1,            // 1 of 2 optional must verify
    requiredDVNs: [LZ_DVN_ADDRESS],
    optionalDVNs: [GOOGLE_DVN_ADDRESS, POLYHEDRA_DVN_ADDRESS]
});

Configuring via EndpointV2

const endpointAbi = parseAbi([
  "function setConfig(address oapp, address lib, (uint32 eid, uint32 configType, bytes config)[] calldata params) external",
]);

// ULN config type for send library
const CONFIG_TYPE_ULN = 2;

// Encode the ULN config
// confirmations(uint64) + requiredDVNCount(uint8) + optionalDVNCount(uint8)
// + optionalDVNThreshold(uint8) + requiredDVNs(address[]) + optionalDVNs(address[])
import { encodeAbiParameters, parseAbiParameters } from "viem";

const ulnConfigEncoded = encodeAbiParameters(
  parseAbiParameters("uint64, uint8, uint8, uint8, address[], address[]"),
  [
    15n,                                // confirmations
    1,                                  // requiredDVNCount
    2,                                  // optionalDVNCount
    1,                                  // optionalDVNThreshold
    [LZ_DVN],                           // requiredDVNs
    [GOOGLE_DVN, POLYHEDRA_DVN],        // optionalDVNs
  ]
);

Security Best Practices

• Always set at least one required DVN. The default config uses the LayerZero Labs DVN. For production, add at least one additional DVN (Google Cloud, Polyhedra, etc.).
• Set block confirmations appropriate to the chain. Ethereum: 15+, L2s (Arbitrum, Base, Optimism): 5+. Higher confirmations reduce reorg risk.
• Configure BOTH send and receive libraries. Security config applies per-direction. A message sent from Ethereum to Arbitrum uses Ethereum's send config AND Arbitrum's receive config. Configure both.

Message Options

Building Options with OptionsBuilder

import {OptionsBuilder} from "@layerzerolabs/oapp-evm/contracts/oapp/libs/OptionsBuilder.sol";

using OptionsBuilder for bytes;

// Gas limit for lzReceive execution on destination
bytes memory options = OptionsBuilder.newOptions()
    .addExecutorLzReceiveOption(200_000, 0);

// Gas limit + native airdrop to recipient on destination
bytes memory optionsWithDrop = OptionsBuilder.newOptions()
    .addExecutorLzReceiveOption(200_000, 0)
    .addExecutorNativeDropOption(1 ether, receiverAddress);

// Composed message — triggers lzCompose after lzReceive
bytes memory composedOptions = OptionsBuilder.newOptions()
    .addExecutorLzReceiveOption(200_000, 0)
    .addExecutorLzComposeOption(0, 100_000, 0); // index, gas, value

// Ordered delivery — enforce nonce ordering
bytes memory orderedOptions = OptionsBuilder.newOptions()
    .addExecutorLzReceiveOption(200_000, 0)
    .addExecutorOrderedExecutionOption();

Options Encoding in TypeScript

import { encodePacked } from "viem";

// Option type constants
const EXECUTOR_WORKER_ID = 1;
const OPTION_TYPE_LZRECEIVE = 1;
const OPTION_TYPE_NATIVE_DROP = 2;

// Encode lzReceive option: 200k gas, 0 value
// Format: workerID(uint8) + optionLength(uint16) + optionType(uint8) + gas(uint128) + value(uint128)
function buildLzReceiveOption(gasLimit: bigint, value: bigint = 0n): `0x${string}` {
  // Options V2 encoding
  const TYPE_3 = "0x0003" as `0x${string}`;
  const workerIdAndOption = encodePacked(
    ["uint8", "uint16", "uint8", "uint128", "uint128"],
    [EXECUTOR_WORKER_ID, 34, OPTION_TYPE_LZRECEIVE, gasLimit, value]
  );
  return `${TYPE_3}${workerIdAndOption.slice(2)}` as `0x${string}`;
}

const options = buildLzReceiveOption(200_000n);

Composed Messages

Composed messages allow an OApp to trigger follow-up logic after the initial lzReceive. The destination contract receives the message in lzReceive, then the Executor calls lzCompose separately.

// In your OApp
function _lzReceive(
    Origin calldata _origin,
    bytes32 _guid,
    bytes calldata _payload,
    address _executor,
    bytes calldata _extraData
) internal override {
    // Decode and store state from the message

    // Queue a composed message for follow-up execution
    endpoint.sendCompose(
        address(this), // composeTo — typically self
        _guid,
        0,             // compose index
        _payload       // data for lzCompose
    );
}

// Called by the Executor after lzReceive completes
function lzCompose(
    address _from,
    bytes32 _guid,
    bytes calldata _message,
    address _executor,
    bytes calldata _extraData
) external payable {
    require(msg.sender == address(endpoint), "Only endpoint");
    // Execute follow-up logic (swap, stake, etc.)
}

Deployment Pattern

Multi-Chain Deploy Sequence

1. Deploy OApp on each chain (with that chain's EndpointV2 address)
2. Set peers bidirectionally between every chain pair
3. Configure DVNs for each pathway
4. Verify with a test message

const ENDPOINT_V2: Record<number, Address> = {
  30101: "0x1a44076050125825900e736c501f859c50fE728c", // Ethereum
  30110: "0x1a44076050125825900e736c501f859c50fE728c", // Arbitrum
  30184: "0x1a44076050125825900e736c501f859c50fE728c", // Base
  30111: "0x1a44076050125825900e736c501f859c50fE728c", // Optimism
  30109: "0x1a44076050125825900e736c501f859c50fE728c", // Polygon
};

// After deploying OApp on each chain, set peers pairwise
async function setPeers(
  deployments: Map<number, Address>,
  walletClients: Map<number, typeof walletClient>,
  publicClients: Map<number, typeof publicClient>,
) {
  const eids = [...deployments.keys()];

  for (const srcEid of eids) {
    for (const dstEid of eids) {
      if (srcEid === dstEid) continue;

      const oapp = deployments.get(srcEid)!;
      const peer = deployments.get(dstEid)!;
      const client = walletClients.get(srcEid)!;
      const pub = publicClients.get(srcEid)!;

      const { request } = await pub.simulateContract({
        address: oapp,
        abi: oappAbi,
        functionName: "setPeer",
        args: [dstEid, addressToBytes32(peer)],
        account: account.address,
      });

      const hash = await client.writeContract(request);
      const receipt = await pub.waitForTransactionReceipt({ hash });
      if (receipt.status !== "success") {
        throw new Error(`setPeer failed: ${srcEid} -> ${dstEid}`);
      }
    }
  }
}

Hardhat Deploy Script

import { ethers } from "hardhat";

async function main() {
  const [deployer] = await ethers.getSigners();
  const endpointV2 = "0x1a44076050125825900e736c501f859c50fE728c";

  const MyOApp = await ethers.getContractFactory("MyOApp");
  const oapp = await MyOApp.deploy(endpointV2, deployer.address);
  await oapp.waitForDeployment();

  const address = await oapp.getAddress();
  console.log(`MyOApp deployed at: ${address}`);

  // Verify on explorer
  await run("verify:verify", {
    address,
    constructorArguments: [endpointV2, deployer.address],
  });
}

main().catch(console.error);

Foundry Deploy Script

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.22;

import {Script, console} from "forge-std/Script.sol";
import {MyOApp} from "../src/MyOApp.sol";

contract DeployOApp is Script {
    function run() external {
        uint256 deployerKey = vm.envUint("PRIVATE_KEY");
        address endpoint = 0x1a44076050125825900e736c501f859c50fE728c;
        address delegate = vm.addr(deployerKey);

        vm.startBroadcast(deployerKey);
        MyOApp oapp = new MyOApp(endpoint, delegate);
        console.log("MyOApp deployed:", address(oapp));
        vm.stopBroadcast();
    }
}

Fee Estimation

Quoting Send Fees

Always quote before sending. The fee depends on payload size, message options (gas, native drop), DVN configuration, and destination chain gas prices.

const oappAbi = parseAbi([
  "function quote(uint32 dstEid, bytes calldata payload, bytes calldata options) view returns ((uint256 nativeFee, uint256 lzTokenFee) fee)",
]);

const fee = await publicClient.readContract({
  address: oappAddress,
  abi: oappAbi,
  functionName: "quote",
  args: [30110, payload, options],
});

// fee.nativeFee — amount of ETH/native token to send as msg.value
// fee.lzTokenFee — if paying with ZRO token (usually 0)

Fee Breakdown

Paying with LZ Token (ZRO)

// To pay with ZRO instead of native:
// 1. Approve ZRO token to EndpointV2
// 2. Pass payInLzToken = true in quote
// 3. lzTokenFee will be non-zero, nativeFee reduced
MessagingFee memory fee = _quote(_dstEid, _payload, _options, true);
// fee.lzTokenFee > 0, fee.nativeFee may be lower

Error Handling

Common Reverts

Debugging Cross-Chain Failures

1. Check source chain transaction. If it reverted, the message was never sent. Fix the source-side issue (fee, peer, options).

2. Use LayerZero Scan. Go to layerzeroscan.com and enter the source tx hash. It shows message status: Sent, Verifying, Verified, Delivered, or Failed.

3. Check DVN verification status. If stuck at "Verifying", DVNs have not confirmed yet. Wait for block confirmations, or check if your DVN config is valid.

4. Check executor delivery. If verified but not delivered, the Executor may have failed. Common cause: insufficient gas in options. Increase lzReceiveOption gas limit.

5. Retry failed messages. If lzReceive reverted on destination, the message is stored and can be retried:

const endpointAbi = parseAbi([
  "function retryPayload(uint32 srcEid, bytes32 sender, uint64 nonce, bytes calldata payload) external payable",
]);

6. Common debugging commands:

# Check if peer is set
cast call <oapp_address> "peers(uint32)(bytes32)" 30110 --rpc-url $RPC_URL

# Check endpoint delegate
cast call <oapp_address> "endpoint()(address)" --rpc-url $RPC_URL

# Verify contract has code
cast code <oapp_address> --rpc-url $RPC_URL

Contract Addresses

Last verified: February 2026

EndpointV2

Send/Receive Libraries (ULN302)

LayerZero Labs DVN

Default Executor

References

• LayerZero V2 Docs
• OApp Developer Guide
• OFT Developer Guide
• EndpointV2 Reference
• DVN Addresses
• LayerZero Scan
• LayerZero V2 GitHub
• OptionsBuilder Reference
• @layerzerolabs/oapp-evm