Amped Defi

Amped DeFi Skill

Overview

The Amped DeFi skill provides on-chain DeFi operations capabilities for agents, enabling seamless swaps, bridging, and money market (supply/borrow/repay/withdraw) actions across multiple chains using the SODAX SDK. This skill abstracts the complexity of cross-chain intent flows, allowance handling, and policy enforcement, allowing agents to execute DeFi operations safely and efficiently.

Key capabilities:

• Cross-chain and same-chain token swaps via solver network
• Token bridging between spoke chains and the Sonic hub chain
• Cross-chain money market operations - supply on one chain, borrow to another!
• Money market operations (supply, withdraw, borrow, repay) with position tracking
• Policy enforcement (spend limits, slippage caps, allowlists)
• Support for both execution mode (agent signs) and prepare mode (unsigned txs for external signing)

Tool Categories

Discovery Tools

Use these tools to explore supported chains, tokens, and wallet state before executing operations.

When to use: Always start with discovery tools to verify chain/token support before attempting any operation.

User Intent History (SODAX API)

Query the SODAX backend API to retrieve complete intent history for a wallet:

→ amped_user_intents(
    walletId="main",
    status="all",     // "all", "open", or "closed"
    limit=10,         // Number of results (max 100)
    offset=0          // For pagination
  )
← Returns: {
    pagination: { total: 1545, offset: 0, limit: 10, hasMore: true },
    intents: [
      {
        intentHash: "0x5b18d04a545f089e6de59106fa79498cfc0b0274...",
        txHash: "0x1c4a8ded456b97ba9fa2b95ee954ed7e92a40365...",
        chainId: 146,
        blockNumber: 57622027,
        status: "closed",
        createdAt: "2025-12-10T19:44:00.380Z",
        input: { token: "0x654D...", amount: "10000000000000000000", chainId: 1768124270 },
        output: { token: "0x9Ee1...", minAmount: "78684607057391028830", chainId: 5 },
        deadline: "2026-12-10T19:48:32.000Z",
        events: [
          { type: "intent-filled", txHash: "0x7981...", blockNumber: 57622086, ... }
        ]
      }
    ],
    summary: { totalIntents: 1545, returned: 10, openIntents: 3, closedIntents: 1537 }
  }

When to use:

• Track status of pending swap/bridge operations
• View historical intent execution history
• Debug failed or cancelled intents
• Monitor solver performance and fill rates

Swap Tools

Cross-chain and same-chain token swaps via SODAX's intent-based solver network.

When to use swaps:

• Exchanging one token for another on the same chain
• Cross-chain swaps (e.g., USDC on Ethereum → USDT on Arbitrum)
• When you need competitive pricing via solver competition

When NOT to use swaps:

• Moving the same token across chains (use bridge tools instead)
• Borrowing/lending operations (use money market tools instead)

Bridge Tools

Bridge tokens between chains via the swap infrastructure.

Note: In SODAX, bridges and cross-chain swaps use the same underlying intent-based messaging system. The amped_bridge_execute tool internally delegates to the swap infrastructure, which provides better routing and reliability.

Recommendation: Use cross-chain swaps (amped_swap_quote + amped_swap_execute) directly for bridging. You can swap USDC on one chain directly to native tokens (ETH, AVAX, POL, etc.) on another chain in a single operation.

When to use bridging/cross-chain swaps:

• Moving tokens from one chain to another (e.g., USDC on Base → ETH on Arbitrum)
• Getting native gas tokens on a new chain (e.g., USDC → POL on Polygon)
• Transferring assets to/from the Sonic hub chain

Preferred approach for gas distribution:

// Get gas tokens on multiple chains from a single source
→ amped_swap_quote(srcChainId="base", dstChainId="polygon", srcToken="USDC", dstToken="POL", amount="0.5", ...)
→ amped_swap_execute(quote)
// Result: 0.5 USDC on Base → ~4 POL on Polygon

Money Market Tools

Supply, borrow, repay, and withdraw assets from the SODAX money market with cross-chain capabilities.

Cross-Chain Money Market Capabilities:

The SODAX money market supports powerful cross-chain operations:

1. Cross-Chain Borrow (Most powerful feature)

   • Supply collateral on Chain A (e.g., Ethereum)
   • Borrow tokens to Chain B (e.g., Arbitrum)
   • Your collateral stays on Chain A, but you receive borrowed tokens on Chain B
   • Use dstChainId parameter to specify the destination chain

2. Cross-Chain Supply

   • Supply tokens on Chain A
   • Collateral is recorded on Chain B (if different)
   • Use dstChainId parameter

3. Cross-Chain Withdraw

   • Withdraw collateral from Chain A
   • Receive tokens on Chain B
   • Use dstChainId parameter

When to use money market:

• Earning yield by supplying assets
• Borrowing against existing collateral
• Accessing liquidity on Chain B without moving collateral from Chain A
• Arbitraging interest rates across chains
• Managing leveraged positions
• Repaying debt to improve health factor

When NOT to use money market:

• Simple token exchanges (use swap tools)
• Moving assets across chains without borrowing (use bridge tools)

Wallet Management Tools

Manage multiple wallets with nicknames for easy identification.

When to use wallet management:

• Setting up multiple wallets for different purposes (trading, holding, testing)
• Organizing wallets with memorable nicknames instead of addresses
• Switching between wallets for different operations
• Managing a portfolio across multiple addresses

Example workflow:

1. amped_add_wallet(nickname="trading", address="0x...", privateKey="0x...")
2. amped_add_wallet(nickname="vault", address="0x...")
3. amped_set_default_wallet(nickname="trading")
4. amped_list_wallets()  // Shows all wallets with default indicator
5. amped_swap_execute(walletId="trading", ...)  // Uses trading wallet

Safety Rules

⚠️ MUST FOLLOW — These rules are enforced by the Policy Engine:

1. Always get a quote before executing

   • Never execute a swap without first calling amped_swap_quote
   • Never execute a bridge without first calling amped_bridge_quote
   • Review the quote output for acceptable slippage and output amounts

2. Verify chain and token are supported

   • Call amped_supported_chains and amped_supported_tokens before operations
   • Unsupported chains/tokens will return clear errors

3. Check slippage is within acceptable bounds

   • Slippage is specified in basis points (bps): 100 bps = 1%
   • Default max slippage: 100 bps (1%)
   • Quotes with slippage exceeding configured caps will be rejected
   • Policy violations return structured errors with remediation guidance

4. Never attempt to drain entire wallet

   • Leave sufficient balance for gas fees
   • Spend limits are enforced per-transaction and per-day
   • Policy caps: maxSwapInputUsd, maxBridgeAmountToken, maxBorrowUsd

5. Always verify transaction status after execution

   • Use amped_swap_status to track swap completion
   • Check amped_money_market_positions to verify position updates
   • Never assume success based on transaction hash alone

6. Enforce allowlist compliance

   • Only operate on allowedChains and allowedTokensByChain per policy
   • Blocked recipients are rejected
   • Policy failures return structured errors with remediation text

7. Simulation is enabled by default

   • skipSimulation=false unless operator override
   • Simulations catch revert conditions before broadcast

8. Monitor health factor for money market positions

   • Health factor < 1.0 = liquidation risk
   • Keep health factor > 1.5 for safety margin
   • Use amped_money_market_positions to monitor

Parameter Conventions

Amount Units

• Amounts are in human-readable units (e.g., "100" for 100 USDC, "0.5" for 0.5 ETH)
• The SDK internally converts to raw units using token decimals from SODAX config
• Examples:
  • "1000" USDC (USDC has 6 decimals) → 1000000000 raw units
  • "1.5" ETH (ETH has 18 decimals) → 1500000000000000000 raw units

Slippage (Basis Points)

• Slippage is specified in basis points (bps) where 100 bps = 1%
• Common values:
  • 50 = 0.5% (tight, for stable pairs)
  • 100 = 1% (standard)
  • 300 = 3% (volatile pairs or cross-chain)
• Quotes exceeding configured maxSlippageBps will be rejected

Chain Identifiers

• Chain IDs are string identifiers, not numeric chain IDs:
  • "ethereum" (Ethereum mainnet)
  • "arbitrum" (Arbitrum One)
  • "sonic" (Sonic hub chain)
  • "base" (Base)
  • "optimism" (Optimism)
  • "avalanche" (Avalanche)
  • "bsc" (BNB Smart Chain)

Token Addresses

• Token addresses should be checksum addresses (mixed-case per EIP-55)
• Examples:
  • "0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48" (USDC on Ethereum)
  • "0x4200000000000000000000000000000000000006" (WETH on Base)

Wallet Identification

• All execute tools require a walletId string
• Wallet resolution is by ID; private keys are never exposed in tool parameters

Optional Parameters

• recipient: Optional destination address (defaults to wallet address)
• timeoutMs: Optional operation timeout in milliseconds
• policyId: Optional policy profile selector for custom limits
• dstChainId: For cross-chain money market - destination chain for the operation

Workflows

Swap Workflow

Complete workflow for executing a token swap:

Step 1: Discovery (if needed)
  → amped_supported_chains
  → amped_supported_tokens(module="swaps", chainId="ethereum")

Step 2: Get Quote
  → amped_swap_quote(
      walletId="main",
      srcChainId="ethereum",
      dstChainId="arbitrum",
      srcToken="0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48",
      dstToken="0xaf88d065e77c8cC2239327C5EDb3A432268e5831",
      amount="1000",
      type="exact_input",
      slippageBps=100
    )
  ← Returns: { quoteId, expectedOutput, slippageBps, fees, deadline }

Step 3: Review Quote
  ✓ Check slippageBps ≤ maxSlippageBps (configurable, default 100)
  ✓ Verify expectedOutput meets requirements
  ✓ Confirm fees are acceptable

Step 4: Execute Swap
  → amped_swap_execute(
      walletId="main",
      quote=<quote from step 2>,
      maxSlippageBps=100,
      skipSimulation=false
    )
  ← Returns: { spokeTxHash, hubTxHash, intentHash, status }

Step 5: Verify Status
  → amped_swap_status(txHash=spokeTxHash)
  ← Returns: { status, confirmations, filledAmount, remainingAmount }

Step 6: Handle Failures (if needed)
  → amped_swap_cancel(walletId="main", intent=<intent>, srcChainId="ethereum")

Bridge Workflow

Complete workflow for bridging tokens between chains:

Step 1: Discover Routes
  → amped_bridge_discover(
      srcChainId="ethereum",
      dstChainId="sonic",
      srcToken="0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48"
    )
  ← Returns: { bridgeableTokens: [...] }

Step 2: Get Bridge Quote
  → amped_bridge_quote(
      srcChainId="ethereum",
      dstChainId="sonic",
      srcToken="0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48",
      dstToken="0x29219dd400f2bf60e5a23d13be72b486d4038894"
    )
  ← Returns: { isBridgeable: true, maxBridgeableAmount: "1000000" }

Step 3: Review Limits
  ✓ Verify isBridgeable === true
  ✓ Check amount ≤ maxBridgeableAmount
  ✓ Confirm amount within policy limits

Step 4: Execute Bridge
  → amped_bridge_execute(
      walletId="main",
      srcChainId="ethereum",
      dstChainId="sonic",
      srcToken="0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48",
      dstToken="0x29219dd400f2bf60e5a23d13be72b486d4038894",
      amount="5000",
      recipient="0x..." // optional, defaults to wallet
    )
  ← Returns: { spokeTxHash, hubTxHash }

Money Market Supply Workflow

Complete workflow for supplying to and monitoring money market positions:

Step 1: View Available Markets
  → amped_money_market_reserves(chainId="sonic")
  ← Returns: { reserves: [
      { token: "USDC", supplyAPY: "4.5%", totalSupplied: "..." },
      { token: "WETH", supplyAPY: "2.1%", totalSupplied: "..." }
    ]}

Step 2: Check Current Positions (RECOMMENDED: use cross-chain view)
  → amped_cross_chain_positions(walletId="main")
  ← Returns: { 
      summary: {
        totalSupplyUsd: "15000.00",
        totalBorrowUsd: "5000.00",
        netWorthUsd: "10000.00",
        availableBorrowUsd: "7000.00",
        healthFactor: "2.55",
        healthFactorStatus: { status: "healthy", color: "green" },
        liquidationRisk: "none",
        weightedSupplyApy: "4.25%",
        weightedBorrowApy: "3.50%",
        netApy: "1.08%"
      },
      chainBreakdown: [...],
      collateralUtilization: {...},
      riskMetrics: {...},
      positions: [...],
      recommendations: ["💡 You have $7000.00 in available borrowing power."]
    }

Step 3: Supply Tokens
  → amped_mm_supply(
      walletId="main",
      chainId="sonic",
      token="0x29219dd400f2bf60e5a23d13be72b486d4038894",
      amount="1000",
      useAsCollateral=true  // Use as collateral for borrowing
    )
  ← Returns: { txHash, spokeTxHash, hubTxHash }

Step 4: Verify Position Update (cross-chain view)
  → amped_cross_chain_positions(walletId="main")
  ← Returns: Updated positions reflecting the new supply across all chains

Cross-Chain Positions View (Recommended)

The amped_cross_chain_positions tool provides a unified portfolio view across all chains. This is the recommended way to check money market positions.

What it shows:

• Total Portfolio Summary: Supply, borrow, net worth across ALL chains
• Health Metrics: Health factor with status indicator, liquidation risk level
• Borrowing Power: Available borrow amount based on collateral
• Yield Metrics: Weighted supply/borrow APY, net APY
• Chain Breakdown: Per-chain position summaries
• Collateral Utilization: How much of your collateral is being used
• Risk Metrics: Current LTV, buffer until liquidation, safe max borrow
• Personalized Recommendations: AI-generated suggestions based on your position

Example Response:

{
  "success": true,
  "walletId": "main",
  "address": "0x...",
  "timestamp": "2026-02-02T12:58:27.999Z",
  "summary": {
    "totalSupplyUsd": "25000.00",
    "totalBorrowUsd": "8000.00",
    "netWorthUsd": "17000.00",
    "availableBorrowUsd": "12000.00",
    "healthFactor": "2.65",
    "healthFactorStatus": { "status": "healthy", "color": "green" },
    "liquidationRisk": "none",
    "weightedSupplyApy": "4.52%",
    "weightedBorrowApy": "3.21%",
    "netApy": "2.89%"
  },
  "chainBreakdown": [
    { "chainId": "ethereum", "supplyUsd": "15000.00", "borrowUsd": "5000.00", "healthFactor": "2.80" },
    { "chainId": "arbitrum", "supplyUsd": "5000.00", "borrowUsd": "2000.00", "healthFactor": "2.50" },
    { "chainId": "sonic", "supplyUsd": "5000.00", "borrowUsd": "1000.00", "healthFactor": "5.00" }
  ],
  "collateralUtilization": {
    "totalCollateralUsd": "20000.00",
    "usedCollateralUsd": "8000.00",
    "availableCollateralUsd": "12000.00",
    "utilizationRate": "40.00%"
  },
  "riskMetrics": {
    "maxLtv": "80.00%",
    "currentLtv": "32.00%",
    "bufferUntilLiquidation": "53.00%",
    "safeMaxBorrowUsd": "13600.00"
  },
  "recommendations": [
    "💡 You have $12000.00 in available borrowing power.",
    "🌐 You have positions across 3 chains. Monitor each chain's health factor independently."
  ]
}

When to use:

• Always start here to get a complete picture of money market positions
• Before any borrow/withdraw operation to check health factor
• To monitor portfolio performance across all chains
• To identify opportunities (available borrowing power, low utilization)

Cross-Chain Money Market Borrow Workflow (Advanced)

Key Feature: Borrow tokens to a different chain than where your collateral is supplied!

Scenario: Supply USDC on Ethereum, borrow USDT to Arbitrum

Step 1: Verify Collateral Position on Source Chain
  → amped_money_market_positions(walletId="main", chainId="ethereum")
  ← Returns: { positions: [...], totalCollateralUSD, availableBorrowUSD, healthFactor }

Step 2: Check Borrow Capacity
  ✓ Verify availableBorrowUSD > desired borrow amount
  ✓ Check healthFactor will remain safe after borrow

Step 3: Cross-Chain Borrow
  → amped_mm_borrow(
      walletId="main",
      chainId="ethereum",        // Source chain (where collateral is)
      dstChainId="arbitrum",     // Destination chain (where you receive borrowed tokens)
      token="0xaf88d065e77c8cC2239327C5EDb3A432268e5831",  // USDT on Arbitrum
      amount="500",
      interestRateMode=2         // Variable rate
    )
  ← Returns: { 
      txHash, 
      spokeTxHash,               // On Ethereum (source)
      hubTxHash, 
      dstSpokeTxHash,            // On Arbitrum (destination)
      isCrossChain: true 
    }

Step 4: Verify Position
  → amped_money_market_positions(walletId="main", chainId="ethereum")
  ← Returns: Updated positions with new borrow recorded

Step 5: Verify Received Tokens on Destination Chain
  → amped_wallet_address(walletId="main")
  ← Check USDT balance on Arbitrum via external means or position query

Cross-Chain Money Market Supply Workflow

Scenario: Supply tokens on Arbitrum, collateral recorded on Sonic

Step 1: Supply with Cross-Chain Flag
  → amped_mm_supply(
      walletId="main",
      chainId="arbitrum",        // Source chain (where tokens are)
      dstChainId="sonic",        // Destination chain (where collateral is recorded)
      token="0xaf88d065e77c8cC2239327C5EDb3A432268e5831",
      amount="1000",
      useAsCollateral=true
    )
  ← Returns: {
      txHash,
      isCrossChain: true,
      message: "Tokens supplied on arbitrum. Collateral available on sonic."
    }

Step 2: Verify on Destination Chain
  → amped_money_market_positions(walletId="main", chainId="sonic")
  ← Returns: Collateral should appear on Sonic

Money Market Repay Workflow

Complete workflow for repaying borrowed tokens:

Step 1: Check Borrow Position
  → amped_money_market_positions(walletId="main", chainId="sonic")
  ← Returns: { positions: [...], totalBorrowUSD, healthFactor }

Step 2: Repay (Full or Partial)
  Option A - Partial Repay:
  → amped_mm_repay(
      walletId="main",
      chainId="sonic",
      token="0x...",
      amount="500"
    )
  
  Option B - Full Repay:
  → amped_mm_repay(
      walletId="main",
      chainId="sonic",
      token="0x...",
      amount="-1",        // Special value for max
      repayAll=true
    )

Step 3: Verify Repayment
  → amped_money_market_positions(walletId="main", chainId="sonic")
  ← Returns: Updated positions with reduced borrow, improved healthFactor

Money Market Withdraw Workflow

Complete workflow for withdrawing supplied tokens:

Step 1: Check Position and Available Liquidity
  → amped_money_market_positions(walletId="main", chainId="sonic")
  ← Verify: withdrawal won't cause healthFactor to drop below safe level
  ← Verify: sufficient available liquidity in reserve

Step 2: Withdraw
  → amped_mm_withdraw(
      walletId="main",
      chainId="sonic",
      token="0x...",
      amount="500",
      withdrawType="default"  // Options: default, collateral, all
    )
  ← Returns: { txHash, spokeTxHash, hubTxHash }

Step 3: Verify Withdrawal
  → amped_money_market_positions(walletId="main", chainId="sonic")
  ← Returns: Updated positions with reduced supply

Cross-Chain Money Market Examples

Example 1: Supply on Ethereum, Borrow to Base

User: "I have USDC on Ethereum. I want to borrow USDC on Base without moving my collateral."

Agent actions:
1. Check positions on Ethereum
   → amped_money_market_positions(walletId="main", chainId="ethereum")

2. Supply USDC on Ethereum
   → amped_mm_supply(
       walletId="main",
       chainId="ethereum",
       token="0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48",
       amount="10000",
       useAsCollateral=true
     )

3. Cross-chain borrow to Base
   → amped_mm_borrow(
       walletId="main",
       chainId="ethereum",        // Collateral is here
       dstChainId="base",         // Receive borrowed tokens here
       token="0x833589fCD6eDb6E08f4c7C32D4f71b54bdA02913",  // USDC on Base
       amount="5000",
       interestRateMode=2
     )

4. Verify positions
   → amped_money_market_positions(walletId="main", chainId="ethereum")
   → amped_money_market_positions(walletId="main", chainId="base")

Example 2: Cross-Chain Withdraw

User: "I have collateral on Sonic but I want to withdraw to Arbitrum."

Agent actions:
→ amped_mm_withdraw(
    walletId="main",
    chainId="sonic",             // Collateral source
    dstChainId="arbitrum",       // Token destination
    token="0x...",
    amount="1000"
  )

Configuration

Environment Variables

Wallet Configuration (AMPED_OC_WALLETS_JSON)

{
  "main": {
    "address": "0x...",
    "privateKey": "0x..."  // Required for execute mode
  },
  "trading": {
    "address": "0x...",
    "privateKey": "0x..."
  }
}

Security: Private keys are never logged. In prepare mode, only address is required.

Policy Limits (AMPED_OC_LIMITS_JSON)

{
  "maxSwapInputUsd": 10000,
  "maxBridgeAmountToken": {
    "0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48": 50000
  },
  "maxBorrowUsd": 5000,
  "maxSlippageBps": 100,
  "allowedChains": ["ethereum", "arbitrum", "sonic", "base"],
  "allowedTokensByChain": {
    "ethereum": ["0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48", "0x..."]
  },
  "blockedRecipients": ["0x..."]
}

RPC Configuration (AMPED_OC_RPC_URLS_JSON)

{
  "ethereum": "https://eth-mainnet.g.alchemy.com/v2/...",
  "arbitrum": "https://arb-mainnet.g.alchemy.com/v2/...",
  "base": "https://base-mainnet.g.alchemy.com/v2/...",
  "sonic": "https://rpc.soniclabs.com"
}

Error Handling

Policy Violations

Policy violations return structured errors with:

• code: Error code (e.g., POLICY_SLIPPAGE_EXCEEDED)
• message: Human-readable description
• remediation: Suggested action to resolve
• current: Current value that violated policy
• limit: Configured limit

Common Error Codes

Idempotency and Retries

Client Operation ID

Execute tools accept an optional clientOperationId parameter for idempotency:

• Duplicate operations with the same ID within the cache window return the cached result
• Prevents duplicate broadcasts on retries
• Recommended for automated workflows

Retry Guidance

• Read operations (quotes, status, positions): Safe to retry with exponential backoff
• Write operations (execute, supply, borrow): Use clientOperationId to prevent duplicates
• Timeout handling: Bridge and money market operations specify timeouts; respect SDK defaults

Security Model

Key Segregation

• Each agent workspace has distinct wallet configurations
• Spoke providers are cached per walletId and never shared across agents
• Private keys are resolved by walletId only; never passed as parameters

Execution vs Prepare Mode

Logging

Structured logs include:

• requestId: Unique request identifier
• agentId: Agent identifier (if available)
• walletId: Wallet identifier
• opType: Operation type (swap, bridge, supply, etc.)
• chainIds, tokenAddresses: Operation context
• txHashes: Transaction hashes (for tracing)

Never logged: Private keys, full wallet JSON, sensitive configuration

Chain-Specific Notes

Sonic Hub Chain

• Sonic is the hub chain for SODAX operations
• Uses SonicSpokeProvider instead of EvmSpokeProvider
• Special handling required for hub chain operations
• Money market operations are hub-centric but support cross-chain interactions

EVM Spoke Chains

• Use EvmSpokeProvider for standard EVM chains (Ethereum, Arbitrum, Base, etc.)
• Standard allowance/approval flow applies
• Bridge operations go: Spoke → Hub → Destination Spoke
• Cross-chain money market operations leverage the hub for state management

Cross-Chain Money Market Architecture

┌─────────────────────────────────────────────────────────────────┐
│                    SODAX Money Market Flow                       │
├─────────────────────────────────────────────────────────────────┤
│                                                                  │
│  Cross-Chain Borrow Example:                                     │
│  Supply USDC on Ethereum → Borrow USDT on Arbitrum              │
│                                                                  │
│  ┌─────────────┐         ┌─────────┐         ┌─────────────┐   │
│  │  Ethereum   │ ──────► │  Sonic  │ ──────► │  Arbitrum   │   │
│  │  (Supply)   │         │  (Hub)  │         │  (Borrow)   │   │
│  └─────────────┘         └─────────┘         └─────────────┘   │
│        │                      │                     │           │
│        │  1. Supply USDC      │                     │           │
│        │  2. Record collateral│                     │           │
│        │─────────────────────►│                     │           │
│        │                      │  3. Verify collateral│           │
│        │                      │  4. Process borrow   │           │
│        │                      │────────────────────►│           │
│        │                      │                     │ 5. Deliver│
│        │                      │                     │    USDT   │
│        │                      │                     │           │
│                                                                  │
│  Key Insight: Your collateral stays on the source chain,         │
│  but you receive borrowed tokens on the destination chain!       │
│                                                                  │
└─────────────────────────────────────────────────────────────────┘

Examples

Example 1: Simple Same-Chain Swap

User: "Swap 100 USDC for ETH on Ethereum"

Agent actions:
1. amped_swap_quote(
     walletId="main",
     srcChainId="ethereum",
     dstChainId="ethereum",
     srcToken="0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48",
     dstToken="0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2",
     amount="100",
     type="exact_input",
     slippageBps=100
   )
2. Review quote (slippage 0.8%, expected output 0.042 ETH)
3. amped_swap_execute(walletId="main", quote=<quote>, maxSlippageBps=100)
4. amped_swap_status(txHash=<spokeTxHash>)

Example 2: Cross-Chain Bridge

User: "Bridge 1000 USDC from Ethereum to Sonic"

Agent actions:
1. amped_bridge_discover(srcChainId="ethereum", dstChainId="sonic", srcToken="0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48")
2. amped_bridge_quote(srcChainId="ethereum", dstChainId="sonic", srcToken="0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48", dstToken="0x29219dd400f2bf60e5a23d13be72b486d4038894")
3. amped_bridge_execute(walletId="main", srcChainId="ethereum", dstChainId="sonic", srcToken="0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48", dstToken="0x29219dd400f2bf60e5a23d13be72b486d4038894", amount="1000")

Example 3: Supply and Borrow Loop (Same Chain)

User: "Supply 5000 USDC and borrow 2000 USDT on Sonic"

Agent actions:
1. amped_money_market_reserves(chainId="sonic")
2. amped_mm_supply(walletId="main", chainId="sonic", token="0x29219dd400f2bf60e5a23d13be72b486d4038894", amount="5000")
3. amped_money_market_positions(walletId="main", chainId="sonic")
4. amped_mm_borrow(walletId="main", chainId="sonic", token="0x...usdt...", amount="2000")
5. amped_money_market_positions(walletId="main", chainId="sonic") // Verify new health factor

Example 4: Cross-Chain Money Market (Advanced)

User: "I want to use my USDC on Ethereum as collateral to borrow USDC on Arbitrum for a trading opportunity"

Agent actions:
1. Verify supported chains and tokens
   → amped_supported_tokens(module="moneyMarket", chainId="ethereum")
   → amped_supported_tokens(module="moneyMarket", chainId="arbitrum")

2. Check current positions
   → amped_money_market_positions(walletId="main", chainId="ethereum")
   → amped_money_market_positions(walletId="main", chainId="arbitrum")

3. Supply USDC on Ethereum
   → amped_mm_supply(
       walletId="main",
       chainId="ethereum",
       token="0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48",
       amount="50000",
       useAsCollateral=true
     )

4. Cross-chain borrow to Arbitrum
   → amped_mm_borrow(
       walletId="main",
       chainId="ethereum",        // Source: collateral is here
       dstChainId="arbitrum",     // Destination: receive tokens here
       token="0xaf88d065e77c8cC2239327C5EDb3A432268e5831",  // USDC on Arbitrum
       amount="20000",
       interestRateMode=2
     )

5. Verify the cross-chain borrow worked
   → Check positions on Ethereum (collateral + debt recorded)
   → Check USDC balance on Arbitrum (borrowed tokens received)

Result: User has 20k USDC on Arbitrum to trade with, while their 50k USDC collateral remains on Ethereum!

Transaction Execution Architecture

SODAX-First Routing (Mandatory)

Critical: ALL DeFi operations MUST route through the SODAX SDK first. External wallet backends (like Bankr) are used ONLY for transaction execution—never for routing decisions.

┌─────────────────────────────────────────────────────────────────┐
│                  SODAX SDK (Routing Layer)                      │
│  ✓ Calculates optimal swap routes                               │
│  ✓ Determines bridge paths                                      │
│  ✓ Manages money market intents                                 │
│  ✓ Handles slippage, fees, deadlines                            │
│  ✓ Prepares transaction data (to, data, value)                  │
└───────────────────────────┬─────────────────────────────────────┘
                            │
                            ▼ raw transaction data
┌─────────────────────────────────────────────────────────────────┐
│           Wallet Backend (Execution Layer ONLY)                 │
│  ✓ Signs the pre-computed transaction                           │
│  ✓ Submits to blockchain                                        │
│  ✓ Returns transaction hash                                     │
│  ✗ NO routing decisions                                         │
│  ✗ NO token swapping logic                                      │
│  ✗ NO DeFi protocol selection                                   │
└─────────────────────────────────────────────────────────────────┘

Supported Backends

Backend Selection

The wallet backend is selected via:

1. config.json → walletBackend: "bankr" | "localKey"
2. Environment: AMPED_OC_WALLET_BACKEND
3. Default: localKey

Bankr Integration

When walletBackend: "bankr" is configured:

1. SODAX SDK prepares the transaction - All routing, calculation, and intent creation happens in SODAX
2. Transaction data is passed to Bankr - Only the raw {to, data, value, chainId} is sent
3. Bankr signs and submits - Bankr executes exactly what SODAX prepared
4. No Bankr routing - Bankr does NOT interpret or re-route the transaction

This ensures:

• Consistent behavior across all backends
• SODAX optimizations always apply
• Audit trail shows SODAX as routing authority
• Backend is a pure execution layer

Configuration Example (Bankr)

// ~/.openclaw/extensions/amped-defi/config.json
{
  "walletBackend": "bankr",
  "bankrApiKey": "bk_...",
  "bankrApiUrl": "https://api.bankr.bot",
  "bankrWalletAddress": "0x..."
}

Security Note: The Bankr API key is stored locally and never exposed in tool parameters or logs.