How do I install the Starlink skill?

Run npx skillmds@latest add kbarbel640-del/starlink in your terminal (requires Node.js), paste this page's agent-chat prompt into Claude, Cursor, or any MCP-connected agent, or download the SKILL.md file and copy it into your agent's skills directory.

Is Starlink safe to use?

This skill has not completed SkillMD's automated safety review yet. Independent scanners report: SkillSpector: PASS, Skill Scanner: PASS. Capability flags: makes network calls. SkillMD never runs a skill's scripts for you; review the SKILL.md before installing.

Which AI agents work with Starlink?

This skill is tagged as working with Claude Code, Claude.ai, OpenAI Codex. SKILL.md is an open format, so most agents that read a skills directory can load it too.

Is Starlink free to use?

Yes. Installing skills from SkillMD is free, and the skill stays under its author's original license.

Who published Starlink?

kbarbel640-del (@kbarbel640-del) published this skill. Their other Agent Skills are listed on their SkillMD profile.

Starlink by kbarbel640-del — Agent Skill

Name: Starlink
Rating: 4.2 (5 reviews)
Author: kbarbel640-del

Starlink

Control Starlink dish via local gRPC API. Get status, list WiFi clients, run speed tests, stow/unstow dish, reboot, and get GPS location. Use when the user asks about Starlink, internet status, connected devices, or satellite connectivity.

kbarbel640-del Updated Sep 8, 2026 1 repo stars

File contents

Starlink CLI

Control your Starlink dish from the command line via its local gRPC API at 192.168.100.1:9200.

Installation

cargo install --git https://github.com/danfedick/starlink-cli

Requires Rust and protoc (Protocol Buffers compiler).

Commands

Status

Get dish state, uptime, SNR, latency, throughput, obstructions:

starlink status
starlink status --json

WiFi Clients

List devices connected to the Starlink router:

starlink clients
starlink clients --json

Output includes: name, MAC, IP, signal strength, interface (2.4GHz/5GHz/ETH), connection time.

Speed Test

Run a speed test through the dish:

starlink speedtest
starlink speedtest --json

Returns download/upload Mbps and latency.

Stow/Unstow

Stow dish flat for transport or storage:

starlink stow           # stow
starlink stow --unstow  # unstow and resume

Reboot

Reboot the dish:

starlink reboot

Location

Get GPS coordinates (must be enabled in Starlink app → Settings → Advanced → Debug Data → "allow access on local network"):

starlink location
starlink location --json

Output Formats

Default: Human-readable colored output
--json: JSON for scripting/parsing

Example JSON parsing:

starlink status --json | jq '.latency_ms'
starlink clients --json | jq '.[] | .name'

Requirements

Connected to Starlink network
Dish reachable at 192.168.100.1:9200
For location: enable in Starlink app first

Troubleshooting

"Failed to connect to Starlink dish"

Verify you're on the Starlink WiFi or wired to the router
Check: ping 192.168.100.1
If using bypass mode with your own router, ensure 192.168.100.1 is still routable

Location returns empty

Enable in Starlink app: Settings → Advanced → Debug Data → "allow access on local network"

Limitations

Device pause/unpause is NOT available (cloud-only feature via Starlink app)
Only works on local network, not remotely

Source

https://github.com/danfedick/starlink-cli

---name: starlinkdescription: Control Starlink dish via local gRPC API. Get status, list WiFi clients, run speed tests, stow/unstow dish, reboot, and get GPS location. Use when the user asks about Starlink, internet status, connected devices, or satellite connectivity.---# Starlink CLIControl your Starlink dish from the command line via its local gRPC API at `192.168.100.1:9200`.## Installation```bashcargo install --git https://github.com/danfedick/starlink-cli```Requires Rust and `protoc` (Protocol Buffers compiler).## Commands### StatusGet dish state, uptime, SNR, latency, throughput, obstructions:```bashstarlink statusstarlink status --json```### WiFi ClientsList devices connected to the Starlink router:```bashstarlink clientsstarlink clients --json```Output includes: name, MAC, IP, signal strength, interface (2.4GHz/5GHz/ETH), connection time.### Speed TestRun a speed test through the dish:```bashstarlink speedteststarlink speedtest --json```Returns download/upload Mbps and latency.### Stow/UnstowStow dish flat for transport or storage:```bashstarlink stow # stowstarlink stow --unstow # unstow and resume```### RebootReboot the dish:```bashstarlink reboot```### LocationGet GPS coordinates (must be enabled in Starlink app → Settings → Advanced → Debug Data → "allow access on local network"):```bashstarlink locationstarlink location --json```## Output Formats- **Default**: Human-readable colored output- **--json**: JSON for scripting/parsingExample JSON parsing:```bashstarlink status --json | jq '.latency_ms'starlink clients --json | jq '.[] | .name'```## Requirements- Connected to Starlink network- Dish reachable at `192.168.100.1:9200`- For location: enable in Starlink app first## Troubleshooting**"Failed to connect to Starlink dish"**- Verify you're on the Starlink WiFi or wired to the router- Check: `ping 192.168.100.1`- If using bypass mode with your own router, ensure 192.168.100.1 is still routable**Location returns empty**- Enable in Starlink app: Settings → Advanced → Debug Data → "allow access on local network"## Limitations- Device pause/unpause is NOT available (cloud-only feature via Starlink app)- Only works on local network, not remotely## Sourcehttps://github.com/danfedick/starlink-cli

Frequently asked questions