Tado

Tado Smart Thermostat Skill

Control your Tado smart thermostat from OpenClaw.

Features

• 📊 Status: Get current temperature, humidity, heating status per zone
• 🌡️ Temperature Control: Set target temperature with optional timer
• 🏠 Presence: Check who is home (geolocation)
• 🔄 Modes: Home, Away, Auto (schedule-based)
• ⚙️ Zone Management: Support for multi-zone setups
• 📋 JSON Output: Machine-readable format for scripting

Installation

1. Install Dependencies

cd ~/clawd/skills/tado
pip3 install libtado --break-system-packages

Minimum version: libtado 4.1.1+ (OAuth2 support required)

2. OAuth2 Authentication (One-Time Setup)

⚠️ Important: libtado 4.1.1+ requires OAuth2. Username/password authentication is no longer supported.

First-time setup:

# Run the libtado CLI to authenticate via browser
python3 -m libtado -f ~/.tado_auth.json zones

What happens:

1. libtado generates a Tado login URL
2. Your browser opens (or you paste the URL manually)
3. Log in with your Tado credentials
4. libtado saves OAuth2 tokens to ~/.tado_auth.json
5. You'll see your zones listed (confirming success)

After setup:

• The skill will automatically use ~/.tado_auth.json
• No further browser login needed
• Tokens refresh automatically

Security Note: The token file should be readable only by you:

chmod 600 ~/.tado_auth.json

3. Test Connection

cd ~/clawd/skills/tado
./scripts/tado.py zones

You should see a list of your configured zones.

If authentication fails:

# Re-authenticate (regenerates tokens)
python3 -m libtado -f ~/.tado_auth.json zones

Authentication

OAuth2 Flow (Required)

As of libtado 4.1.1+, OAuth2 is the only supported authentication method.

Token file location: ~/.tado_auth.json

How it works:

1. First run: Browser login via python3 -m libtado -f ~/.tado_auth.json zones
2. libtado saves access token + refresh token
3. Skill uses token_file_path parameter: Tado(token_file_path='~/.tado_auth.json')
4. libtado automatically refreshes expired tokens

Token structure (managed by libtado):

{
  "access_token": "...",
  "refresh_token": "...",
  "expires_at": 1234567890
}

Do NOT manually edit this file! Let libtado manage it.

Migration from Username/Password

Old authentication (no longer works):

Tado(username='email', password='pass')  # ❌ Not supported

New authentication (required):

Tado(token_file_path='~/.tado_auth.json')  # ✅ Works

Migration steps:

1. Delete old ~/.tado_credentials.json (no longer used)
2. Run python3 -m libtado -f ~/.tado_auth.json zones
3. Follow browser login flow
4. Done! Skill will work automatically

No backward compatibility: Once you upgrade to libtado 4.1.1+, you MUST use OAuth2.

Usage

Status Commands

Get status of all zones:

./scripts/tado.py status

Output:

🏠 Woonkamer (Zone 1)
  Current: 20.5°C (55% humidity)
  Target:  21.0°C
  Heating: ON (45%)
  Mode:    Auto (following schedule)

🏠 Slaapkamer (Zone 2)
  Current: 18.2°C (58% humidity)
  Target:  18.0°C
  Heating: OFF (0%)
  Mode:    Auto (following schedule)

Get status of specific zone:

./scripts/tado.py status --zone 1
./scripts/tado.py status --zone "Woonkamer"

JSON output (for scripting):

./scripts/tado.py status --json

Temperature Control

Set temperature (permanent until next schedule change):

./scripts/tado.py set --zone 1 --temperature 21
./scripts/tado.py set --zone "Woonkamer" --temperature 21.5

Set temperature with timer (temporary override):

# Set 22°C for 60 minutes, then return to schedule
./scripts/tado.py set --zone 1 --temperature 22 --duration 60

# Short form
./scripts/tado.py set --zone 1 -t 22 -d 60

Reset to automatic schedule:

./scripts/tado.py reset --zone 1
./scripts/tado.py reset --zone "Woonkamer"

Home/Away Modes

Set home mode (all zones follow schedule):

./scripts/tado.py mode home

Set away mode (energy-saving temperatures):

./scripts/tado.py mode away

Set auto mode (geolocation-based):

./scripts/tado.py mode auto

When in auto mode, Tado automatically switches between home/away based on your phone's location.

Presence Detection

Check who is home:

./scripts/tado.py presence

Output:

👥 Presence
  Anyone home: Yes
  - Sander's iPhone: 🏠 Home
  - Partner's iPhone: 🚶 Away

Zone Management

List all zones:

./scripts/tado.py zones

Output:

📍 Available Zones:
  1: Woonkamer (HEATING)
  2: Slaapkamer (HEATING)
  3: Badkamer (HOT_WATER)

Zone Identification

Zones can be referenced by ID or name:

# By ID (faster)
./scripts/tado.py status --zone 1

# By name (case-insensitive)
./scripts/tado.py status --zone "Woonkamer"
./scripts/tado.py status --zone "woonkamer"

JSON Output for Scripting

All commands support --json flag for machine-readable output:

./scripts/tado.py status --zone 1 --json

Example output:

{
  "zone_id": 1,
  "zone_name": "Woonkamer",
  "current_temp": 20.5,
  "current_humidity": 55,
  "target_temp": 21.0,
  "heating": true,
  "heating_power": 45,
  "mode": "MANUAL",
  "overlay": true
}

Use in scripts:

# Get current temperature as number
TEMP=$(./scripts/tado.py status --zone 1 --json | jq -r '.current_temp')

# Check if heating is on
HEATING=$(./scripts/tado.py status --zone 1 --json | jq -r '.heating')

# Get all zones data
./scripts/tado.py status --json | jq '.zones[] | {name: .zone_name, temp: .current_temp}'

OpenClaw Integration

From OpenClaw chat:

@jarvis What's the temperature in the living room?
→ Uses: ./scripts/tado.py status --zone "Woonkamer"

@jarvis Set living room to 22 degrees for 1 hour
→ Uses: ./scripts/tado.py set --zone "Woonkamer" -t 22 -d 60

@jarvis Is anyone home?
→ Uses: ./scripts/tado.py presence

@jarvis Turn on away mode
→ Uses: ./scripts/tado.py mode away

Troubleshooting

Authentication Errors

Error: Tado OAuth2 token not found!

Solution: Run the one-time authentication flow:

python3 -m libtado -f ~/.tado_auth.json zones

Then follow the browser login prompt.

Error: Failed to connect to Tado: 401 Unauthorized

Possible causes:

• Expired or invalid OAuth2 token
• Token file corrupted
• Tado service outage

Solutions:

1. Re-authenticate:

   python3 -m libtado -f ~/.tado_auth.json zones
   

2. Check token file exists: ls -la ~/.tado_auth.json
3. Verify token file permissions: chmod 600 ~/.tado_auth.json
4. Check Tado service status at https://status.tado.com

API Errors

Error: Failed to get status: HTTP 500

Solution: Tado API may be temporarily down. Check https://status.tado.com

Error: Zone 'X' not found

Solution:

1. List available zones: ./scripts/tado.py zones
2. Use exact zone ID or name from the list

Connection Issues

Error: Failed to connect to Tado: Network unreachable

Solution:

1. Check internet connection
2. Verify DNS is working: ping my.tado.com
3. Check firewall settings

Library Errors

Error: ModuleNotFoundError: No module named 'PyTado'

Solution:

pip3 install libtado --break-system-packages

Error: AttributeError: 'Tado' object has no attribute 'setAutoMode'

Possible cause: Outdated libtado version

Solution:

pip3 install --upgrade libtado

API Rate Limits

Tado API has rate limits (exact numbers not publicly documented):

Best practices:

• Don't poll status more than once per minute
• Use --json output and cache results when possible
• Batch multiple zones in one status call instead of separate calls

If rate limited:

• Wait 1-2 minutes before retrying
• Reduce polling frequency

Data Privacy

Local data:

• Credentials stored in ~/.tado_credentials.json (mode 600 recommended)
• No usage tracking or telemetry
• All API calls go directly to Tado servers

Never exposed:

• Your credentials are never sent anywhere except Tado API
• Zone names, temperatures, and presence data stay local
• No third-party analytics

Advanced Usage

Temperature Scheduling

Create a simple heating schedule script:

#!/bin/bash
# morning-heat.sh - Warm up before wake-up

# Set living room to 21°C at 6:30 AM
./scripts/tado.py set --zone "Woonkamer" -t 21 -d 120

# Reset to schedule after 2 hours
sleep 7200
./scripts/tado.py reset --zone "Woonkamer"

Run with cron:

30 6 * * * /path/to/morning-heat.sh

Smart Away Detection

#!/bin/bash
# smart-away.sh - Set away mode if nobody home

ANYONE_HOME=$(./scripts/tado.py presence --json | jq -r '.anyone_home')

if [ "$ANYONE_HOME" = "false" ]; then
    ./scripts/tado.py mode away
    echo "Nobody home - enabled away mode"
fi

Energy Monitoring

#!/bin/bash
# energy-log.sh - Log heating activity

DATE=$(date +%Y-%m-%d_%H:%M)
./scripts/tado.py status --json > ~/logs/tado-$DATE.json

# Analyze with jq
jq '.zones[] | select(.heating == true) | {zone: .zone_name, power: .heating_power}' \
  ~/logs/tado-$DATE.json

Known Limitations

1. Hot Water Control: Basic support only (ON/OFF), no temperature setting
2. Weather Data: Not yet implemented (available in Tado API)
3. Energy IQ: Statistics not yet exposed (available in Tado API)
4. Multi-Home: Only one Tado home supported per token file

Future Enhancements

• OAuth2 authentication (✅ Implemented in v1.1.0)
• Weather data integration
• Energy IQ statistics
• Multi-home support
• Web dashboard (optional)
• Push notifications for temperature alerts

Resources

• libtado Documentation: https://libtado.readthedocs.io/
• libtado GitHub: https://github.com/germainlefebvre4/libtado
• Tado API (unofficial): https://blog.scphillips.com/posts/2017/01/the-tado-api-v2/
• Tado Service Status: https://status.tado.com

Support

For skill issues:

• Check this SKILL.md
• Read error messages carefully (they include hints)
• Try --json output for debugging

For Tado API/account issues:

• Check Tado app first (does it work?)
• Visit https://my.tado.com
• Contact Tado support

Changelog

v1.1.0 (2026-02-03)

• ✅ OAuth2 authentication (libtado 4.1.1+)
• ⚠️ BREAKING: Username/password auth removed (no longer supported by libtado)
• One-time browser login flow via python3 -m libtado
• Automatic token refresh
• Updated all documentation for OAuth2

v0.1.0 (2026-01-29)

• Initial release
• Status, temperature control, modes, presence
• JSON output support
• Zone management (ID and name-based)
• Error handling and troubleshooting