Mobile Emulator Start

mobile-emulator-start — Metro + Android emulator in a sane order

Degree of freedom: MIXED. Reuse vs fresh Metro [HIGH freedom]; port kill, boot, reverse, /status, then intent [LOW freedom — run exactly].

Deliver a working dev loop (emulator online → tunnel → bundler ready → app intent) without burning time on duplicate Metros, stale caches, or racing the dev client ahead of /status.

Pair with mobile-emulator-test for full QA; this skill focuses on bring-up + terminal hygiene.

How to reason

1. Inspect — existing terminals, curl /status, adb devices
2. Decide — reuse a healthy Metro vs one explicit fresh wipe
3. Order — free ports → boot AVD → reverse → Metro → wait /status
4. Launch — intent only after packager-status:running

Worked example

Inspect: two terminals on 8081; adb devices empty; last intent was ECONNREFUSED. Decide: kill both Metros (not a cache wipe — user asked to start, not "stale bundle"). Order: boot AVD → adb reverse → one expo start --dev-client → poll /status. Launch: am start the scheme deeplink; logcat has no immediate refused-to-Metro.

Self-critique before reporting

• One Metro — no second cwd serving the wrong graph
• Order held — emulator in adb devices before reverse; /status before intent
• Size expected — wm size is 1080×2400 unless scroll-QA was requested
• Right owner — guest/signed-in QA walk → mobile-emulator-test; crash after start → debug-error

Critical ordering (why this skill exists) [LOW freedom — run exactly]

1. Emulator attached to adb before trusting adb reverse (or reverse again when the serial appears).
2. curl http://127.0.0.1:<PORT>/status shows packager-status:running before am start / dev-client deeplink (avoids “Cannot connect to Expo CLI” / 127.0.0.1 refused).
3. Helpers that enumerate devices once at startup may skip --launch / reverse if the emulator booted late — re-run reverse + intent after adb devices shows device.

Phase A: Read existing terminals first [HIGH freedom]

Before spawning duplicate processes, inspect what is already running.

A.1 Cursor / VS Code–style terminal metadata

If the workspace exposes a terminals/ folder (often under the project’s .cursor/projects/.../terminals/ or similar), read *.txt headers:

• command: — already running expo start, metro, emulator, gradle?
• pid:, cwd: — avoid second Metro from the wrong package root.
• Output tail — bundle errors, port-in-use, ENOENT, SyntaxError in the app (fix code before restarting blindly).

Prefer reusing a healthy Metro session when the user wants speed; only kill + restart when stuck, on wrong port, or after selecting the fresh path (Phase C).

A.2 Quick health probe (non-destructive)

# Metro default
curl -sSf "http://127.0.0.1:8081/status" | head -c 120 || true
adb devices

If Metro responds and an emulator-* device exists, you may only need adb reverse + reload — not a full reboot.

Phase B: Fresh instance vs fast iteration [HIGH freedom]

Heuristic: if the user says “stale bundle / nothing changed / white screen after hours of dev” → lean fresh once, confirm Phase 1.5-style bundle checks from mobile-emulator-test. If they say “just start my session” → prefer fast.

Phase C: Free the ports and orphaned processes [LOW freedom — run exactly]

C.1 Ports (adjust to the repo’s Metro port)

Common: 8081 (Metro), 19000–19002 (Expo). Discover from package.json scripts or prior terminal output.

• Windows: netstat -ano | findstr :8081 → taskkill /PID <pid> /F
• macOS/Linux: lsof -i :8081 → kill -9 <pid> (or fuser -k 8081/tcp)

Kill orphan adb.exe only when transport is stuck (symptom: adb devices hangs / offline spam). Pattern that works but is heavy-handed on Windows: taskkill /IM adb.exe /F /T then adb start-server.

C.2 Duplicate Metro in another repo / cwd

Starting Metro from the wrong cwd serves the wrong graph — always cd into the mobile app root the project uses (apps/mobile, packages/app-mobile, etc.) before npx expo start / react-native start.

Phase D: Emulator display resolution [LOW freedom — run exactly]

D.0 Which resolution to use?

Default: start at 1080×2400; switch to 1080×4000 only on explicit scroll-QA request with a matching skin.

To switch resolution without rebooting the AVD:

adb shell wm size 1080x2400 # default (standard phone)
adb shell wm size 1080x4000 # opt-in tall screenshots (requires matching tall skin)
adb shell wm size reset # restore to AVD default
adb shell wm size # verify

Scale factor for coordinate math when screenshots are displayed at ~294px wide in chat:

device_x = display_x × (1080 / display_image_width_px)
device_y = display_y × (4000 / display_image_height_px)

Example — button at display position (147, 1200) in a 294×1568-px chat image:

• device_x = 147 × (1080/294) ≈ 540
• device_y = 1200 × (4000/1568) ≈ 3061

D.1 Boot sequence

emulator -list-avds
# Then:
emulator -avd "<AVD_NAME>" -netdelay none -netspeed full

Use %LOCALAPPDATA%\Android\Sdk\emulator\emulator.exe on Windows if emulator is not on PATH.

After boot, immediately set the target resolution:

adb shell wm size 1080x2400 # default for tap QA

D.2 Display truth

After boot:

adb shell wm size
adb shell wm density

Expect Physical size: 1080x2400 for the default tap-QA preset (or 1080x4000 if scroll QA was requested). If you see 720×1280 or another unintended size, the AVD skin.path is overriding hw.lcd.* — use adb shell wm size 1080x2400 to override at runtime, or apply the minimal custom skin workflow in mobile-emulator-test Phase 0.5.

D.3 _no_skin failure

If the emulator exits immediately with unknown skin name '_no_skin', remove/replace skin.name=_no_skin in the AVD config.ini — see mobile-emulator-test Phase 0.5b–c.

Phase E: adb attach + reverse [LOW freedom — run exactly]

adb start-server
adb wait-for-device
# Wait until boot_completed if scripts are flaky:
adb shell getprop sys.boot_completed # expect 1

METRO_PORT=8081 # or repo-specific
adb reverse tcp:${METRO_PORT} tcp:${METRO_PORT}

Re-apply adb reverse after new emulator session, adb kill-server, or USB reconnect.

Phase F: Start Metro (background-friendly) [LOW freedom — run exactly]

From the correct app cwd:

# Expo dev client (common)
npx expo start --dev-client --port 8081

# Bare React Native (example)
npx react-native start --port 8081

Run long-lived processes in the background when the agent must continue other work; otherwise the user’s terminal owns the foreground process.

Fresh-start variant (slow, clears Metro’s world — use sparingly):

• npx expo start --dev-client --clear --port 8081, or repo script equivalent (dev-fresh, start:clean, etc.).

Phase G: Block until Metro is actually ready [LOW freedom — run exactly]

METRO_PORT=8081
# Bash-style loop; cap total wait ~120–180s on cold cache wipes
while ! curl -sSf "http://127.0.0.1:${METRO_PORT}/status" | grep -q "running"; do sleep 3; done

Only then trigger the app (Phase H). This removes the classic race where the emulator shows Cannot connect / ECONNREFUSED even though Metro appears a few seconds later.

Phase H: Launch the app [LOW freedom — run exactly]

H.1 Expo dev client (generic)

Discover scheme from app.json / app.config.* (and Android intent-filter if native-linked). Pattern:

<scheme>://expo-development-client/?url=http%3A%2F%2Flocalhost%3A<PORT>

adb shell am start -W -a android.intent.action.VIEW \
 -d "<scheme>://expo-development-client/?url=http%3A%2F%2Flocalhost%3A8081"

H.2 Installed debug APK / Kotlin (no Expo)

adb shell am start -W -n <applicationId>/.<MainActivityName>

H.3 Hot Reload after Metro is up

• Shake menu / adb shell input keyevent 82 (menu) and enable Fast Refresh, or
• curl -X POST http://localhost:8081/reload when supported.

Debugging cheat sheet

Performance notes (keep fast)

• Prefer one Metro per machine per app root; extra instances waste RAM and confuse watchman.
• Do not chain cache-hungry “fresh” scripts before every save — that kills Hot Reload wins.
• On Linux, if file watchers exhaust, bump fs.inotify.max_user_watches (rare; only when Metro logs watcher errors).

Optional repo integration

Many monorepos expose:

node scripts/dev-android.mjs --launch --port 8081

If such a script polls /status and sets adb reverse, prefer it after the emulator is already listed in adb devices. If the script bails early with no device, start the emulator first or manually run Phase E–H once online.

Verification checklist (short) [LOW freedom — do not skip]

• One Metro listening; curl /status = running
• adb devices shows device, not offline
• adb reverse tcp:<PORT> tcp:<PORT> executed for that Metro port
• adb shell wm size matches expected 1080×2400 (default) or 1080×4000 (if scroll QA was requested with a matching skin)
• App intent succeeds after /status OK — logcat has no immediate ECONNREFUSED to Metro

Cross-links

• mobile-emulator-test — AVD layout template, guest/sign-in walks, DB/Sentry loops.
• debug-error — systematic JS/native failure isolation if the bundle crashes after start.