Project Settings

Project Settings Skill

🔀 Registered settings moved to the engine. Category-based registered-setting access (list_categories / list_settings / get_setting / set_setting / set_category_settings_from_json) is now Unreal 5.8's native ConfigSettingsToolset — reach it with call_tool (run describe_toolset on ConfigSettingsToolset for its actions/params). VibeUE's ProjectSettingsService was trimmed to the delta the engine doesn't cover: discover_settings_classes + direct INI read/write (get_ini_value / set_ini_value / *_ini_array / list_ini_sections / list_ini_keys) + config save. Use those from execute_python_code as shown below.

Critical Rules

⚠️ EditorStyleSettings is NOT a Python Class

EditorStyleSettings is not discoverable via discover_python_class('unreal.EditorStyleSettings') — it returns PYTHON_CLASS_NOT_FOUND. Reach it through the engine ConfigSettingsToolset as a settings category (via call_tool), or write its values directly via raw INI:

# ❌ WRONG — will fail
discover_python_class('unreal.EditorStyleSettings')  # NOT FOUND

# ✅ CORRECT — engine ConfigSettingsToolset (registered settings) via call_tool, OR raw INI:
result = unreal.ProjectSettingsService.set_ini_value(
    "/Script/EditorStyle.EditorStyleSettings",
    "AssetEditorOpenLocation", "MainWindow", "EditorPerProjectUserSettings.ini")

⚠️ Category vs Raw INI

Named registered-setting categories (general, maps, EditorStyleSettings, etc.) are handled by the engine ConfigSettingsToolset. From VibeUE you instead address settings by their INI section / key / file:

⚠️ Map Paths Must Be Full Asset Paths

# WRONG - folder path
"/Game/Variant_Horror.Variant_Horror"

# CORRECT - full map asset path  
"/Game/Variant_Horror/Lvl_Horror.Lvl_Horror"

Always verify with does_asset_exist() before setting.

⚠️ Always Check Operation Results

The INI write methods return an FProjectSettingResult:

result = unreal.ProjectSettingsService.set_ini_value(
    "/Script/EngineSettings.GeneralProjectSettings", "ProjectName", "MyGame", "DefaultGame.ini")
if not result.success:
    print(f"Failed: {result.error_message}")

(Registered-setting writes via the engine ConfigSettingsToolset return their own result — check it the same way.)

Workflows

Basic Project Info Setup

Project info (name/company/description) is a registered category — set it via the engine ConfigSettingsToolset (call_tool). Or write the INI keys directly from VibeUE:

import unreal

sec  = "/Script/EngineSettings.GeneralProjectSettings"
file = "DefaultGame.ini"
unreal.ProjectSettingsService.set_ini_value(sec, "ProjectName",  "My RPG Game", file)
unreal.ProjectSettingsService.set_ini_value(sec, "CompanyName",  "Indie Studios", file)
unreal.ProjectSettingsService.set_ini_value(sec, "Description",  "An epic fantasy adventure", file)
unreal.ProjectSettingsService.save_all_config()

Configure Default Maps

import unreal

# Registered "maps" category → engine ConfigSettingsToolset via call_tool, OR raw INI:
result = unreal.ProjectSettingsService.set_ini_value(
    "/Script/EngineSettings.GameMapsSettings", "GameDefaultMap",
    "/Game/Maps/MainMenu.MainMenu", "DefaultEngine.ini")
if result.success:
    unreal.ProjectSettingsService.save_all_config()
    print("Default map updated and saved")

Set Editor Startup Map

import unreal

# EditorStartupMap controls which level opens when the editor launches.
# Registered setting → engine ConfigSettingsToolset (via call_tool), OR raw INI:
# Use full asset path format: /Game/Path/To/Level.Level
result = unreal.ProjectSettingsService.set_ini_value(
    "/Script/UnrealEd.EditorLoadingSavingSettings", "EditorStartupMap",
    "/Game/Levels/MyLevel.MyLevel", "EditorPerProjectUserSettings.ini")
if result.success:
    unreal.ProjectSettingsService.save_all_config()
    print("Editor startup map updated and saved")

💾 If the level must be saved first (untitled level, or "save as and set as startup"): the editor world comes from unreal.get_editor_subsystem(unreal.UnrealEditorSubsystem).get_editor_world() (NOT LevelEditorSubsystem, NOT deprecated EditorLevelLibrary), then unreal.EditorLoadingAndSavingUtils.save_map(world, "/Game/Maps/MyLevel"). Full workflow: load the level-actors skill → "Save the Current Level".

Discover Settings Classes

import unreal

classes = unreal.ProjectSettingsService.discover_settings_classes()
for c in classes:
    print(f"{c.class_name}: {c.property_count} properties in {c.config_file}")

List Settings in a Category

Listing the settings inside a named category is an engine ConfigSettingsToolset action (via call_tool). From VibeUE you can enumerate the raw INI keys of a known section instead:

import unreal

sec  = "/Script/EngineSettings.GeneralProjectSettings"
file = "DefaultGame.ini"
for key in unreal.ProjectSettingsService.list_ini_keys(sec, file):
    print(f"{key} = {unreal.ProjectSettingsService.get_ini_value(sec, key, file)}")

Find a Setting (When You Don't Know the Section)

discover_settings_classes() maps each settings class to its INI section + file, so you can locate a setting without guessing Python class names, then read its keys via raw INI:

import unreal

keyword = "AssetEditor"  # partial match on class/section name
for c in unreal.ProjectSettingsService.discover_settings_classes():
    if keyword.lower() in c.class_name.lower() or keyword.lower() in c.config_section.lower():
        print(f"{c.class_name} -> section {c.config_section} in {c.config_file}")
        for key in unreal.ProjectSettingsService.list_ini_keys(c.config_section, c.config_file):
            print(f"   {key}")

Use discover_settings_classes() instead of guessing Python class names. Many settings classes (e.g., EditorStyleSettings) are NOT exposed as Python classes — edit them through the engine ConfigSettingsToolset or via their INI section.

Direct INI Access

import unreal

# List sections
sections = unreal.ProjectSettingsService.list_ini_sections("DefaultEngine.ini")

# Get value
value = unreal.ProjectSettingsService.get_ini_value("/Script/Engine.Engine", "GameEngine", "DefaultEngine.ini")

# Set value
result = unreal.ProjectSettingsService.set_ini_value(
    "/Script/MyGame.CustomSettings",
    "EnableDebugMode",
    "True",
    "DefaultGame.ini"
)

Data Structures

Python Naming Convention: C++ types like FProjectSettingResult are exposed as ProjectSettingResult in Python (no F prefix).

SettingsClassInfo (from discover_settings_classes())

• class_name, class_path
• config_section, config_file
• property_count, is_developer_settings

ProjectSettingResult (from INI write methods)

• success, error_message
• modified_settings, failed_settings
• requires_restart

Sample scripts (run via execute_python_code)

• scripts/configure_setting.txt — discover settings classes and read/write a project setting.