Setup Browser Cookies

Preamble (run first)

_UPD=$(~/.claude/skills/gstack/bin/gstack-update-check 2>/dev/null || .claude/skills/gstack/bin/gstack-update-check 2>/dev/null || true)
[ -n "$_UPD" ] && echo "$_UPD" || true
mkdir -p ~/.gstack/sessions
touch ~/.gstack/sessions/"$PPID"
_SESSIONS=$(find ~/.gstack/sessions -mmin -120 -type f 2>/dev/null | wc -l | tr -d ' ')
find ~/.gstack/sessions -mmin +120 -type f -delete 2>/dev/null || true
_CONTRIB=$(~/.claude/skills/gstack/bin/gstack-config get gstack_contributor 2>/dev/null || true)
_PROACTIVE=$(~/.claude/skills/gstack/bin/gstack-config get proactive 2>/dev/null || echo "true")
_BRANCH=$(git branch --show-current 2>/dev/null || echo "unknown")
echo "BRANCH: $_BRANCH"
echo "PROACTIVE: $_PROACTIVE"
_LAKE_SEEN=$([ -f ~/.gstack/.completeness-intro-seen ] && echo "yes" || echo "no")
echo "LAKE_INTRO: $_LAKE_SEEN"
_TEL=$(~/.claude/skills/gstack/bin/gstack-config get telemetry 2>/dev/null || true)
_TEL_PROMPTED=$([ -f ~/.gstack/.telemetry-prompted ] && echo "yes" || echo "no")
_TEL_START=$(date +%s)
_SESSION_ID="$$-$(date +%s)"
echo "TELEMETRY: ${_TEL:-off}"
echo "TEL_PROMPTED: $_TEL_PROMPTED"
mkdir -p ~/.gstack/analytics
echo '{"skill":"setup-browser-cookies","ts":"'$(date -u +%Y-%m-%dT%H:%M:%SZ)'","repo":"'$(basename "$(git rev-parse --show-toplevel 2>/dev/null)" 2>/dev/null || echo "unknown")'"}'  >> ~/.gstack/analytics/skill-usage.jsonl 2>/dev/null || true
for _PF in ~/.gstack/analytics/.pending-*; do [ -f "$_PF" ] && ~/.claude/skills/gstack/bin/gstack-telemetry-log --event-type skill_run --skill _pending_finalize --outcome unknown --session-id "$_SESSION_ID" 2>/dev/null || true; break; done

If PROACTIVE is "false", do not proactively suggest gstack skills — only invoke them when the user explicitly asks. The user opted out of proactive suggestions.

If output shows UPGRADE_AVAILABLE <old> <new>: read ~/.claude/skills/gstack/gstack-upgrade/SKILL.md and follow the "Inline upgrade flow" (auto-upgrade if configured, otherwise AskUserQuestion with 4 options, write snooze state if declined). If JUST_UPGRADED <from> <to>: tell user "Running gstack v{to} (just updated!)" and continue.

If LAKE_INTRO is no: Before continuing, introduce the Completeness Principle. Tell the user: "gstack follows the Boil the Lake principle — always do the complete thing when AI makes the marginal cost near-zero. Read more: https://garryslist.org/posts/boil-the-ocean" Then offer to open the essay in their default browser:

open https://garryslist.org/posts/boil-the-ocean
touch ~/.gstack/.completeness-intro-seen

Only run open if the user says yes. Always run touch to mark as seen. This only happens once.

If TEL_PROMPTED is no AND LAKE_INTRO is yes: After the lake intro is handled, ask the user about telemetry. Use AskUserQuestion:

Help gstack get better! Community mode shares usage data (which skills you use, how long they take, crash info) with a stable device ID so we can track trends and fix bugs faster. No code, file paths, or repo names are ever sent. Change anytime with gstack-config set telemetry off.

Options:

• A) Help gstack get better! (recommended)
• B) No thanks

If A: run ~/.claude/skills/gstack/bin/gstack-config set telemetry community

If B: ask a follow-up AskUserQuestion:

How about anonymous mode? We just learn that someone used gstack — no unique ID, no way to connect sessions. Just a counter that helps us know if anyone's out there.

Options:

• A) Sure, anonymous is fine
• B) No thanks, fully off

If B→A: run ~/.claude/skills/gstack/bin/gstack-config set telemetry anonymous If B→B: run ~/.claude/skills/gstack/bin/gstack-config set telemetry off

Always run:

touch ~/.gstack/.telemetry-prompted

This only happens once. If TEL_PROMPTED is yes, skip this entirely.

AskUserQuestion Format

ALWAYS follow this structure for every AskUserQuestion call:

1. Re-ground: State the project, the current branch (use the _BRANCH value printed by the preamble — NOT any branch from conversation history or gitStatus), and the current plan/task. (1-2 sentences)
2. Simplify: Explain the problem in plain English a smart 16-year-old could follow. No raw function names, no internal jargon, no implementation details. Use concrete examples and analogies. Say what it DOES, not what it's called.
3. Recommend: RECOMMENDATION: Choose [X] because [one-line reason] — always prefer the complete option over shortcuts (see Completeness Principle). Include Completeness: X/10 for each option. Calibration: 10 = complete implementation (all edge cases, full coverage), 7 = covers happy path but skips some edges, 3 = shortcut that defers significant work. If both options are 8+, pick the higher; if one is ≤5, flag it.
4. Options: Lettered options: A) ... B) ... C) ... — when an option involves effort, show both scales: (human: ~X / CC: ~Y)

Assume the user hasn't looked at this window in 20 minutes and doesn't have the code open. If you'd need to read the source to understand your own explanation, it's too complex.

Per-skill instructions may add additional formatting rules on top of this baseline.

Completeness Principle — Boil the Lake

AI-assisted coding makes the marginal cost of completeness near-zero. When you present options:

• If Option A is the complete implementation (full parity, all edge cases, 100% coverage) and Option B is a shortcut that saves modest effort — always recommend A. The delta between 80 lines and 150 lines is meaningless with CC+gstack. "Good enough" is the wrong instinct when "complete" costs minutes more.
• Lake vs. ocean: A "lake" is boilable — 100% test coverage for a module, full feature implementation, handling all edge cases, complete error paths. An "ocean" is not — rewriting an entire system from scratch, adding features to dependencies you don't control, multi-quarter platform migrations. Recommend boiling lakes. Flag oceans as out of scope.
• When estimating effort, always show both scales: human team time and CC+gstack time. The compression ratio varies by task type — use this reference:

• This principle applies to test coverage, error handling, documentation, edge cases, and feature completeness. Don't skip the last 10% to "save time" — with AI, that 10% costs seconds.

Anti-patterns — DON'T do this:

• BAD: "Choose B — it covers 90% of the value with less code." (If A is only 70 lines more, choose A.)
• BAD: "We can skip edge case handling to save time." (Edge case handling costs minutes with CC.)
• BAD: "Let's defer test coverage to a follow-up PR." (Tests are the cheapest lake to boil.)
• BAD: Quoting only human-team effort: "This would take 2 weeks." (Say: "2 weeks human / ~1 hour CC.")

Search Before Building

Before building infrastructure, unfamiliar patterns, or anything the runtime might have a built-in — search first. Read ~/.claude/skills/gstack/ETHOS.md for the full philosophy.

Three layers of knowledge:

• Layer 1 (tried and true — in distribution). Don't reinvent the wheel. But the cost of checking is near-zero, and once in a while, questioning the tried-and-true is where brilliance occurs.
• Layer 2 (new and popular — search for these). But scrutinize: humans are subject to mania. Search results are inputs to your thinking, not answers.
• Layer 3 (first principles — prize these above all). Original observations derived from reasoning about the specific problem. The most valuable of all.

Eureka moment: When first-principles reasoning reveals conventional wisdom is wrong, name it: "EUREKA: Everyone does X because [assumption]. But [evidence] shows this is wrong. Y is better because [reasoning]."

Log eureka moments:

jq -n --arg ts "$(date -u +%Y-%m-%dT%H:%M:%SZ)" --arg skill "SKILL_NAME" --arg branch "$(git branch --show-current 2>/dev/null)" --arg insight "ONE_LINE_SUMMARY" '{ts:$ts,skill:$skill,branch:$branch,insight:$insight}' >> ~/.gstack/analytics/eureka.jsonl 2>/dev/null || true

Replace SKILL_NAME and ONE_LINE_SUMMARY. Runs inline — don't stop the workflow.

WebSearch fallback: If WebSearch is unavailable, skip the search step and note: "Search unavailable — proceeding with in-distribution knowledge only."

Contributor Mode

If _CONTRIB is true: you are in contributor mode. You're a gstack user who also helps make it better.

At the end of each major workflow step (not after every single command), reflect on the gstack tooling you used. Rate your experience 0 to 10. If it wasn't a 10, think about why. If there is an obvious, actionable bug OR an insightful, interesting thing that could have been done better by gstack code or skill markdown — file a field report. Maybe our contributor will help make us better!

Calibration — this is the bar: For example, $B js "await fetch(...)" used to fail with SyntaxError: await is only valid in async functions because gstack didn't wrap expressions in async context. Small, but the input was reasonable and gstack should have handled it — that's the kind of thing worth filing. Things less consequential than this, ignore.

NOT worth filing: user's app bugs, network errors to user's URL, auth failures on user's site, user's own JS logic bugs.

To file: write ~/.gstack/contributor-logs/{slug}.md with all sections below (do not truncate — include every section through the Date/Version footer):

# {Title}

Hey gstack team — ran into this while using /{skill-name}:

**What I was trying to do:** {what the user/agent was attempting}
**What happened instead:** {what actually happened}
**My rating:** {0-10} — {one sentence on why it wasn't a 10}

## Steps to reproduce
1. {step}

## Raw output

{paste the actual error or unexpected output here}

## What would make this a 10
{one sentence: what gstack should have done differently}

**Date:** {YYYY-MM-DD} | **Version:** {gstack version} | **Skill:** /{skill}

Slug: lowercase, hyphens, max 60 chars (e.g. browse-js-no-await). Skip if file already exists. Max 3 reports per session. File inline and continue — don't stop the workflow. Tell user: "Filed gstack field report: {title}"

Completion Status Protocol

When completing a skill workflow, report status using one of:

• DONE — All steps completed successfully. Evidence provided for each claim.
• DONE_WITH_CONCERNS — Completed, but with issues the user should know about. List each concern.
• BLOCKED — Cannot proceed. State what is blocking and what was tried.
• NEEDS_CONTEXT — Missing information required to continue. State exactly what you need.

Escalation

It is always OK to stop and say "this is too hard for me" or "I'm not confident in this result."

Bad work is worse than no work. You will not be penalized for escalating.

• If you have attempted a task 3 times without success, STOP and escalate.
• If you are uncertain about a security-sensitive change, STOP and escalate.
• If the scope of work exceeds what you can verify, STOP and escalate.

Escalation format:

STATUS: BLOCKED | NEEDS_CONTEXT
REASON: [1-2 sentences]
ATTEMPTED: [what you tried]
RECOMMENDATION: [what the user should do next]

Telemetry (run last)

After the skill workflow completes (success, error, or abort), log the telemetry event. Determine the skill name from the name: field in this file's YAML frontmatter. Determine the outcome from the workflow result (success if completed normally, error if it failed, abort if the user interrupted).

PLAN MODE EXCEPTION — ALWAYS RUN: This command writes telemetry to ~/.gstack/analytics/ (user config directory, not project files). The skill preamble already writes to the same directory — this is the same pattern. Skipping this command loses session duration and outcome data.

Run this bash:

_TEL_END=$(date +%s)
_TEL_DUR=$(( _TEL_END - _TEL_START ))
rm -f ~/.gstack/analytics/.pending-"$_SESSION_ID" 2>/dev/null || true
~/.claude/skills/gstack/bin/gstack-telemetry-log \
  --skill "SKILL_NAME" --duration "$_TEL_DUR" --outcome "OUTCOME" \
  --used-browse "USED_BROWSE" --session-id "$_SESSION_ID" 2>/dev/null &

Replace SKILL_NAME with the actual skill name from frontmatter, OUTCOME with success/error/abort, and USED_BROWSE with true/false based on whether $B was used. If you cannot determine the outcome, use "unknown". This runs in the background and never blocks the user.

Setup Browser Cookies

Import logged-in sessions from your real Chromium browser into the headless browse session.

How it works

1. Find the browse binary
2. Run cookie-import-browser to detect installed browsers and open the picker UI
3. User selects which cookie domains to import in their browser
4. Cookies are decrypted and loaded into the Playwright session

Steps

1. Find the browse binary

SETUP (run this check BEFORE any browse command)

_ROOT=$(git rev-parse --show-toplevel 2>/dev/null)
B=""
[ -n "$_ROOT" ] && [ -x "$_ROOT/.claude/skills/gstack/browse/dist/browse" ] && B="$_ROOT/.claude/skills/gstack/browse/dist/browse"
[ -z "$B" ] && B=~/.claude/skills/gstack/browse/dist/browse
if [ -x "$B" ]; then
  echo "READY: $B"
else
  echo "NEEDS_SETUP"
fi

If NEEDS_SETUP:

1. Tell the user: "gstack browse needs a one-time build (~10 seconds). OK to proceed?" Then STOP and wait.
2. Run: cd <SKILL_DIR> && ./setup
3. If bun is not installed: curl -fsSL https://bun.sh/install | bash

2. Open the cookie picker

$B cookie-import-browser

This auto-detects installed Chromium browsers (Comet, Chrome, Arc, Brave, Edge) and opens an interactive picker UI in your default browser where you can:

• Switch between installed browsers
• Search domains
• Click "+" to import a domain's cookies
• Click trash to remove imported cookies

Tell the user: "Cookie picker opened — select the domains you want to import in your browser, then tell me when you're done."

3. Direct import (alternative)

If the user specifies a domain directly (e.g., /setup-browser-cookies github.com), skip the UI:

$B cookie-import-browser comet --domain github.com

Replace comet with the appropriate browser if specified.

4. Verify

After the user confirms they're done:

$B cookies

Show the user a summary of imported cookies (domain counts).

Notes

• First import per browser may trigger a macOS Keychain dialog — click "Allow" / "Always Allow"
• Cookie picker is served on the same port as the browse server (no extra process)
• Only domain names and cookie counts are shown in the UI — no cookie values are exposed
• The browse session persists cookies between commands, so imported cookies work immediately