Vision

/vision

You are running the vision skill. Produce a VISION.md the author can approve: an acceptance policy for the project's future, grounded in what they actually build, and sharpened by hypotheticals they answer on an interactive review board.

VISION.md is the only committed alignment surface. A reviewer who has never seen the board must be able to accept or resist a change from it alone.

This is not a writing exercise. Follow this file top to bottom.

Host requirement

You need read access to the target repository and its real history:

• Prefer merged-PR history via a GitHub-class CLI (gh, gh-axi).
• If PRs are not accessible, fall back to git commit history on the default branch (git log): titles and messages still reveal what the author builds.
• Only if no real history is readable at all, stop and say so. Never fabricate the author's values, PR titles, or evidence. A vision built on invented evidence is worse than no vision.

The review loop runs on lavish-axi, executed directly through npx -y lavish-axi - no install requirement. Simply try to launch it, and report a blocker only if the launch itself fails.

Hard rules

1. Evidence over vibes. Every principle in the draft must be traceable to concrete evidence: named PRs or commits, files, docs, or reasoning the author approved into VISION.md. Generic engineering virtues ("we value quality") are banned unless the history demonstrates them specifically.
2. Check for an existing VISION.md first. If one exists on the default branch, switch to delta mode: treat it as the approved baseline, propose line-level candidate changes from evidence newer than it, and never write a competing document.
3. The author owns the vision. You draft, stress-test, and fold in their verdicts; you never approve, never soften a hypothetical to please, and never fold in a principle they did not state or demonstrate.
4. A vision is an acceptance policy. Write testable accept/resist criteria in declarative present tense, with explicit non-goals, so a future reader, human or agent, can apply them to a concrete change from VISION.md alone.
5. No softball hypotheticals. Each one must sit on a genuine fault line where yes and no are both defensible, with both sides steelmanned. If you can predict the author's answer, replace the hypothetical.
6. The review loop runs on lavish-axi, from the shipped template. Draft and hypotheticals are presented as one board built from assets/review-template.html + assets/review.css, used as-is: black ink on white paper set like literature, full draft always fully visible, one hypothetical at a time in a card stack. Fill the template's slots; never restyle or restructure it, and never substitute another review surface.
7. Iterate in batches, trace every edit. Each author verdict maps to a named edit in a changelog; the author must be able to see exactly how their answer changed the text.
8. Formatting. One sentence per line. Plain hyphens, never em dashes. No roadmap, no feature list, no marketing voice.
9. VISION.md is the single alignment surface. Fold the author's reasoning into the prose wherever it matters, in whatever form reads best. Never copy hypotheticals or board transcripts into VISION.md. Never write, keep, or point to an answers file in the target repo. Board transcripts may live in the tool's scratch area and must never be committed.

Pipeline

Step 0 - Parse target and author

• Target repo: current working directory by default, or an explicit owner/repo.
• Author: the person whose vision this is; default to the repo owner. Their merged work is the evidence base.
• Ask one short question if the target or author is genuinely ambiguous.

Step 1 - Learn the pattern

A VISION.md has a stable anatomy; hold the draft to it:

• Identity opener: "X exists so that ...", who it serves, and "It owns exactly one thing: ...".
• 3-6 principle sections with short declarative headings, each a set of testable present-tense commitments and refusals.
• Explicit non-goals, named concretely ("it is not a CI system, not a ...").
• A closing pair of tests: "A change aligns when ..." and "A change should be resisted when ...", concrete enough to apply to a real PR.
• Voice: declarative, present tense, zero marketing; length a page or two (40-70 lines). Author reasoning belongs in the prose wherever it matters, in whatever form reads best; never as a ledger of questions asked.

If the author names exemplar visions, read them; note shape, voice, length.

Step 2 - Existing-vision check

• If the default branch has a VISION.md: delta mode (hard rule 2). Diff its age against the history and propose only evidence-backed candidate additions or edits, each independently acceptable.
• If not: from-scratch mode.
• If VISION-ANSWERS.md or any companion answers file exists, run Migration before drafting: fold any missing reasoning into VISION.md, delete the answers file, and remove pointers to it.

Step 3 - Mine the evidence

• Repo analysis: README identity claims, architecture, stated non-goals, refusal paths, test discipline.
• History mining: list the author's merged PRs, aim for 30-100 titles, and read 8-15 full bodies spread across the range (for example gh pr list --author <owner> --state merged --limit 100, or the gh-axi equivalent). If PRs are inaccessible, walk default-branch commit history instead (git log --author=<owner>), reading messages for the same signal.
• Extract recurring revealed values: what gets built, what gets refused, what class of bug gets fixed at the root, what the author writes in intent statements.
• Produce a private evidence sheet: value -> supporting PRs, commits, or files. This sheet is the source of truth for every drafted line.

Step 4 - Draft

• Follow the step 1 anatomy and the output template below.
• Every line must map to the evidence sheet. Length target: 40-70 lines.
• Delta mode instead yields: baseline unchanged + a numbered list of candidate line additions/edits, each with its evidence.

Step 5 - Design the hypotheticals

• 8-12 concrete change proposals per vision, aimed at the draft's fault lines. Draw from this taxonomy:
  • tempting-but-off-mission features the author will plausibly be asked for;
  • principle collisions (simplicity vs capability, safety vs speed, generality vs focus, cost vs quality);
  • slippery slopes, where one reasonable step normalizes the next;
  • scope expansions (new users, new content types, new hosts, teams);
  • identity questions the draft leaves open.
• Format per hypothetical: id, title, the concrete proposal (2-4 sentences), the principle it tests (quote the draft), and why the answer is non-obvious (steelman both sides).
• Quality gate: delete and replace any hypothetical whose answer you can predict.

Step 6 - Review loop (lavish-axi, from the shipped template)

• Copy assets/review-template.html and assets/review.css into the tool's scratch area (not the target repo), then fill only the template's marked slots: project name, run note, the full DRAFT markdown, and the CARDS array (id, title, proposal, tested principle, both-sides steelman per card).
• Change nothing else: the template already carries the house structure - full draft on the left, one card at a time on the right, the steelman in full view, one queued verdict per card - so no boilerplate is rewritten and no run is restyled.
• Launch with npx -y lavish-axi <board.html>, report the URL, then wait on npx -y lavish-axi poll <board.html>; answers arrive as queued verdicts.
• On each batch: fold the author's reasoning into the draft so VISION.md stays self-sufficient for an accept/resist test. Write it in whatever form reads best; do not copy the hypothetical, the card id, or the board transcript. Board HTML and poll logs may remain in the tool's scratch area; never write an answers file into the target repo. Update the board in place (new draft text, remaining cards), and reply through poll --agent-reply with a changelog line per verdict ("H-7 no -> authority section now opens with ...").
• Continue until the author approves or ends the session. Do not approve on their behalf; do not treat silence as approval.

Step 7 - Finish

• Deliver: the approved VISION.md text (or approved delta). That file is the whole alignment surface.
• Confirm the target repo has no VISION-ANSWERS.md and no other answers file, and that README and AGENTS.md do not point at one.
• Do not tell the author to keep an answers file. The changelog lived in the review-loop replies; it is not a committed artifact.

Output template (from-scratch mode)

# Vision

`{project}` exists so that {the one-sentence reason the project exists}.
It serves {the named user}, and it {what it turns their input into}.
It owns exactly one thing: {the single owned surface}.

## {Principle section, 3-6 of these}

{Declarative, testable, present-tense lines; one sentence per line.}
{Explicit boundaries: what is welcome, what is refused, and why.}

## Scope

{What this project is not, named concretely.}
{Where personal/private material stays, if applicable.}
{How the repo holds itself to its own standard, if applicable.}

A change aligns when {testable positive criteria}.
A change should be resisted when {testable negative criteria}.

Pre-flight checklist (before drafting)

• Target repo and author resolved
• Existing VISION.md checked (mode chosen)
• Existing VISION-ANSWERS.md migrated or confirmed absent
• Evidence sheet built from real PRs or commits (no invented evidence)

Pre-approval checklist (before the author signs off)

• Every drafted line traces to the evidence sheet or author reasoning reflected in VISION.md
• 8-12 hypotheticals, none predictable, both sides steelmanned
• Every author verdict's reasoning is reflected in the draft, with a traced changelog line in the review reply
• VISION.md is sufficient on its own for an accept/resist test
• No answers file written, kept, or pointed to in the target repo

Migration (existing VISION-ANSWERS.md)

When the target repo already has VISION-ANSWERS.md (or any companion answers or transcript file next to the vision):

1. Read it. Extract the author's reasoning. Discard hypotheticals, card ids, verdict labels, steelmans, and board transcripts.
2. Fold any reasoning VISION.md lacks into the prose, in whatever form reads best. Skip anything already captured. Merge overlapping answers rather than one entry per question.
3. Delete the answers file from the target repo.
4. Remove pointers to it from AGENTS.md, README, and any other committed doc.

Length bar: VISION.md stays a page or two (target 40-70 lines), not a ledger. If folding would grow it into a Q&A dump, distill harder. The test is: a reviewer who has never seen the board can accept or resist a concrete change from VISION.md alone.