kunitoki Audio Signal Flow Explainer
Core principle: Audio signal flow is a directed graph. Tracing it reveals hidden coupling, latency paths, and places where the signal can be corrupted.
Step 1 — Map the graph
- Find all sources (oscillators, audio inputs, file readers, generators)
- Find all processors (filters, effects, gain stages, dynamics)
- Find all routers (bus sends, parallel splits, sidechain taps, mixer channels)
- Find all sinks (audio outputs, recorders, meters, analyzers)
- Note parallel paths — any branch that rejoins a main path
- Note feedback loops — any path where output feeds back into an earlier node
- Note sidechain connections — signals that control a processor without passing audio through it
Step 2 — Identify each node type
| Node type | What to note |
|---|---|
| Source (oscillator, audio input, file reader) | Sample rate, channel count, sync source |
| Processor (filter, effect, gain) | In/out channel count, latency added, stateful or stateless |
| Router (bus send, parallel split, sidechain tap) | Where signal copies go, gain staging at split |
| Sink (audio output, recorder, meter) | Expected format, callback timing, buffer size |
Step 3 — Surface issues
- Latency compensation mismatches on parallel paths
- Channel count mismatches between connected nodes
- Sidechain input not wired — processor receives silence as control signal
- Uninitialized state in feedback loops (DC buildup, NaN propagation)
- DC leaking into output (missing highpass or DC-blocking filter)
- Sample rate mismatch between source and downstream processor
- Gain staging that causes clipping before a later limiter or saturation stage
- Missing denormal protection in recursive filter paths
Step 4 — Write the signal flow description
Use this format:
## Signal Flow: [component/system]
### Graph
Source → [gain: 1.0] → [Biquad LPF] → [Comp sidechain tap] → [Output]
↓
[Compressor] → [Output]
### Latency path
Source → LPF (0 samples) → Compressor (64 samples lookahead) → Output
Total: 64 samples
### Issues found
- Parallel path to Output has no latency compensation for the 64-sample compressor delay
Quick reference
| Pattern | What to check |
|---|---|
| Parallel split rejoining | Latency of each branch must match before summing |
| Sidechain compressor | Verify sidechain input is connected and level-matched |
| Send/return bus | Check send gain, return gain, and whether send is pre- or post-fader |
| Feedback loop | Confirm a delay of at least 1 sample exists to break algebraic loop |
| Multi-rate graph | Confirm resampling nodes at every rate boundary |