Execute Phase

Autonomous Phase Execution

Execute the next phase of the project named in $ARGUMENTS end-to-end, autonomously, in this session. Do not stop for input unless genuinely blocked (see HALT CONDITIONS). Stop when the phase is complete. Do not continue to the next phase; that is a separate session.

Preconditions (verify before starting)

• Session permission mode permits unattended workflow runs. If a review workflow's first run prompts for approval, approve with "don't ask again for this path" so later phases run silently.
• The /codex-review skill (Codex CLI) and ultracode workflow support are available — the review gates hard-require both. If either is missing, HALT; do not substitute an ad-hoc review and mark the gate passed.
• Working tree is clean or its state is understood. Note current branch.

Orchestration model

• Main session model: Opus (orchestrator + synthesis + convergence judgment).
• Review allocation:
  • Spec and plan gates: exactly ONE ultracode workflow pass (panel review of the raw artifact), then /codex-review to convergence. The single workflow pass catches structural problems; Codex handles the iterative tail on idle credits.
  • Final review (post-implementation): /codex-review only. No ultracode workflow at this gate.
• Workflow subagent routing: every ultracode workflow MUST use Sonnet worker subagents; reserve Opus subagents only for genuinely complex sub-tasks (e.g. cross-document adversarial comparison). State this constraint explicitly in each workflow trigger so it is encoded into the generated script.

References

Shared standards live in ${CLAUDE_PLUGIN_ROOT}/references/. They are the rubric for both authoring and the review gates.

• Spec construction — core: ${CLAUDE_PLUGIN_ROOT}/references/spec-construction.md
• Spec construction — phase delta: ${CLAUDE_PLUGIN_ROOT}/references/spec-construction-phase.md
• Plan construction standard: ${CLAUDE_PLUGIN_ROOT}/references/plan-construction.md

When this skill writes or reviews a phase spec, the standard is the core PLUS the phase delta (read both). The phase delta governs inheritance: cite the master design and predecessor-phase contracts; restate only load-bearing inherited invariants; do not re-derive system architecture.

These standards supersede any external authoring skill. Do NOT invoke Superpowers brainstorming, writing-plans, or test-driven-development while this skill is active — this skill provides its own spec, plan, and TDD process, and these standards are the authority.

Validator gates (specpipe)

Structural gates run through the bundled specpipe CLI (a plain stdlib package — the invocation never writes into the plugin tree):

PYTHONPATH="${CLAUDE_PLUGIN_ROOT}/scripts/specpipe" uv run --no-project python -B -m specpipe <subcommand> …

(Below, specpipe <subcommand> abbreviates that invocation.) Errors (exit 1) MUST be fixed and the validator re-run clean BEFORE the gate's workflow/Codex pass — the deterministic pass is free; do not spend panel review on structural defects. Warnings may be accepted with a one-line recorded justification in the artifact. Validator failures are NOT halt conditions: fix and re-run.

Path convention: specpipe is layout-agnostic — every subcommand takes explicit paths. Examples below use the greenfield default docs/handoff/; if the project keeps its state elsewhere, resolve paths per that project's convention (the audit file always sits beside the phase plan in an audit/ subdirectory, and init-project accepts --handoff-dir).

Phase pipeline

1. Resume

• Resolve the next phase deterministically: specpipe next-phase docs/handoff/phase-plan.md (resume-first: an in_progress phase from an interrupted session is returned before any pending one) from the project's handoff phase-plan file — the status-tracking projection of the master spec's build-plan section. Statuses live in the plan file; phase definitions live in the master; on conflict the master governs. If it reports RESUME, reassess that phase's partial state — committed tasks stand, continue from the first incomplete task — or abandon an unsalvageable run with specpipe set-status docs/handoff/phase-plan.md --id <id> --to pending and re-resolve. For a fresh phase, mark it active with specpipe set-status docs/handoff/phase-plan.md --id <id> --to in_progress and reset round counters with specpipe rounds .spec-pipeline/state.json --reset.
• When brainstorming or filling gaps, choose sane defaults aligned with project conventions. Do not stop for input on resolvable design choices.

2. Spec

• Instantiate ${CLAUDE_PLUGIN_ROOT}/templates/phase-spec.md and write the phase spec per the spec construction standard — core + phase delta (see References). Full depth on this phase's slice; inherit system context from the master and predecessor phases by reference per the phase delta's inheritance rule. VALIDATOR GATE: specpipe validate spec --kind phase <spec-path> --master <master-path> clean before the workflow pass.
• WORKFLOW PASS (exactly one — do NOT loop to convergence): ultracode: comprehensively review the phase spec at <path> against the spec construction standard (core + phase delta). Use Sonnet worker subagents; Opus only for genuinely complex sub-tasks. Independently verify each finding before reporting. Apply all justified fixes from this single pass (skip findings that do not survive verification).
• CODEX CONVERGENCE: run /codex-review against the spec at <path>. Apply justified fixes and re-run until either (a) a pass yields zero justified fixes, or (b) 3 rounds are reached. On hitting the cap, record remaining open findings in the spec and proceed (subject to HALT CONDITIONS: unresolved errors — not warnings — are a halt, not a proceed). Count rounds with specpipe rounds .spec-pipeline/state.json --gate spec --increment before each round.

3. Plan

• Instantiate ${CLAUDE_PLUGIN_ROOT}/templates/implementation-plan.md and write the implementation plan per the plan construction standard (see References). Each task embeds its complete failing-test code and implementation code in TDD order; the RED gate is preserved at execution by step ordering (write test → run/fail → implement → run/pass), not by withholding code. VALIDATOR GATE: specpipe validate plan <plan-path> clean before the workflow pass.
• WORKFLOW PASS (exactly one — do NOT loop to convergence): ultracode: comprehensively review the implementation plan at <path> against the plan construction standard. Use Sonnet worker subagents; Opus only for genuinely complex sub-tasks. Independently verify each finding before reporting. Apply all justified fixes from this single pass (skip findings that do not survive verification).
• CODEX CONVERGENCE: run /codex-review against the plan at <path>. Apply justified fixes and re-run until either (a) a pass yields zero justified fixes, or (b) 3 rounds are reached. On hitting the cap, record remaining open findings in the plan and proceed (subject to HALT CONDITIONS: unresolved errors — not warnings — are a halt, not a proceed). Count rounds with specpipe rounds .spec-pipeline/state.json --gate plan --increment before each round.

4. Implement (per-task RED → GREEN → refactor)

Work the plan task-by-task. The plan already contains each task's failing-test code and implementation code (per the plan construction standard); execute them in order rather than writing all tests then all implementation.

• Before starting, classify each module the phase touches per TDD SCOPE (below) and record the classification for the close-out report. Logic-bearing modules run the full per-task cycle; glue/config modules need only a smoke test.
• For each task, in order:
  • RED — apply the task's test step(s): write the task's test(s) from the plan, then run them. Confirm they FAIL for the RIGHT reason — a missing symbol or a failed assertion, NOT a collection/import/syntax error in the test. A test that errors on collection has not established RED; fix it until it fails cleanly. Record the RED evidence with specpipe record-red --cmd '<test command>' --task <task-id> --audit docs/handoff/audit/phase-<id>.md — it rejects collection errors (RED not established) and appends the evidence block the close-out report cites.
  • The task's tests are now FROZEN (see TDD GUARDRAILS).
  • GREEN — apply the task's implementation from the plan. Run the tests; iterate on the IMPLEMENTATION (never the frozen tests) until green. Record with specpipe record-green --cmd '<test command>' --task <task-id> --audit docs/handoff/audit/phase-<id>.md.
  • REFACTOR — refactor for clarity while green; re-run after each change.
  • Run the full verification gate; commit the task.
• Glue/config tasks: a single import-and-instantiate smoke test substitutes for the RED→GREEN cycle.
• Subagent use: a subagent may own a COMPLETE task (its own frozen tests + implementation) and run that task's local RED→GREEN. Do not split a single task's test and implementation across separate subagents — the red-green state is shared mutable repo state and will race.

5. Coverage

• Run coverage (e.g. pytest + coverage.py); meet the project's coverage threshold on touched modules.
• Coverage is a BACKSTOP, not the test-writing mechanism: under TDD the tests already exist per task. Any new public surface on a LOGIC-BEARING module that appears WITHOUT a corresponding test from its task is a TDD violation — flag it, add the missing test, and note why it was missed. Do not silently backfill and move on. (Glue/config modules per TDD SCOPE are exempt from the full-test requirement but must still carry their smoke test.)

6. Final review (Codex)

• Run /codex-review against the implementation for this phase. Do NOT run an ultracode workflow at this gate.
• CODEX CONVERGENCE: apply justified fixes and re-run /codex-review until either (a) a pass yields zero justified fixes, or (b) 5 rounds are reached. On hitting the cap, record remaining open items and proceed (subject to HALT CONDITIONS for unresolved errors). Count rounds with specpipe rounds .spec-pipeline/state.json --gate final --increment before each round.

7. Close out

• Summarize phase outcome + any open/deferred items into the handoff state.
• Mark the phase done: specpipe set-status docs/handoff/phase-plan.md --id <id> --to complete. Commit docs/handoff/audit/phase-<id>.md with the close-out — it IS the RED→GREEN audit trail the report cites.
• Review git status --porcelain and stage residual changes by explicit path — never git add -A / git add . (untracked scratch files, coverage artifacts, or local env files must not enter the phase commit).
• Commit any residual changes with a concise imperative message describing the phase (per-task commits already landed in step 4).
• Close out the session using the project's handoff state (whichever handoff system the project repo has adopted, for example agent-handoff-v3) so the next phase can be resolved in a future session.
• Push all commits to the current branch's remote.
• Stop here. Do not continue to the next phase; that is a separate session.

HALT CONDITIONS (the only reasons to stop and ask)

• /codex-review or ultracode workflow support is unavailable — the review gates hard-require them (see Preconditions).
• A design decision is genuinely irreversible AND has no defensible default.
• A test/review failure indicates a spec-level contradiction that cannot be resolved without redefining phase scope.
• Push fails for an auth/remote reason requiring human intervention.
• Any convergence loop would exceed its round cap (3 for spec/plan Codex review, 5 for the final Codex review) with errors (not warnings) still unresolved — surface them rather than committing broken work.

TDD SCOPE

Strict TDD (the per-task RED→GREEN→refactor cycle in step 4) applies to LOGIC-BEARING modules. Classify each module touched this phase before implementing, and record the classification in the close-out report.

• Logic-bearing (strict TDD required) — anything with branching, computation, parsing, state transitions, data transformation, error handling, or a contract another module depends on. When in doubt, classify as logic-bearing. This is the default.
• Glue/config (smoke test sufficient) — thin wiring with no branching: argument plumbing, static config/constants, dataclass/Pydantic model declarations with no custom validation, trivial pass-through wrappers, __init__ exports. A single import-and-instantiate smoke test is enough; a full RED→GREEN cycle is not required.

Rules:

• "Glue" is a justification that must survive scrutiny, not an escape hatch. If a module has ANY conditional logic or could fail in a way a test would catch, it is logic-bearing. Misclassifying logic as glue to skip TDD is a TDD GUARDRAILS violation.
• A custom Pydantic validator, a non-trivial default factory, or any __post_init__ with logic moves a model from glue to logic-bearing.
• Record the per-module classification (module → logic-bearing | glue, one-line reason) in the close-out report so the scoping decision is auditable.

TDD GUARDRAILS (violations are HALT conditions, not auto-fixes)

Once RED is established in step 4, the implementation may NOT:

• Edit, delete, weaken, or relax any test assertion to achieve green.
• Add @pytest.mark.skip, @pytest.mark.xfail, or comment out tests to pass.
• Hardcode return values whose only purpose is to satisfy a specific test.
• Write tautological or vacuous tests (assert True, assert x == x, no assertions).

The ONLY permitted reason to modify a frozen test is that the test itself encodes a genuine error relative to the converged spec. In that case: STOP, state the contradiction explicitly, correct the test, re-establish RED, and record the change in the close-out report. Do not edit a frozen test silently.

Close-out report must include the RED→GREEN audit trail: for each logic-bearing unit, the test's pre-implementation failure reason and post-implementation pass. This is the evidence that TDD was followed rather than retrofitted.

Output

Brief final report:

• Phase completed; coverage delta.
• Per-module TDD scope classification (module → logic-bearing | glue, reason).
• RED→GREEN audit trail per logic-bearing unit.
• Per gate: whether the single workflow pass ran (spec/plan) and Codex rounds consumed; open/deferred items.
• Commit SHA(s) pushed.