Lap-Platform Amazon Relational Database Service
API version: 2014-10-31
Auth
AWS SigV4
Base URL
Not specified.
Setup
- Configure auth: AWS SigV4
- POST / -- create first resource
Endpoints
162 endpoints across 1 groups. See references/api-spec.lap for full details.
root
| Method | Path | Description |
|---|---|---|
| POST | / | Associates an Identity and Access Management (IAM) role with a DB cluster. |
| POST | / | Associates an Amazon Web Services Identity and Access Management (IAM) role with a DB instance. To add a role to a DB instance, the status of the DB instance must be available. This command doesn't apply to RDS Custom. |
| POST | / | Adds a source identifier to an existing RDS event notification subscription. |
| POST | / | Adds metadata tags to an Amazon RDS resource. These tags can also be used with cost allocation reporting to track cost associated with Amazon RDS resources, or used in a Condition statement in an IAM policy for Amazon RDS. For an overview on tagging your relational database resources, see Tagging Amazon RDS Resources or Tagging Amazon Aurora and Amazon RDS Resources. |
| POST | / | Applies a pending maintenance action to a resource (for example, to a DB instance). |
| POST | / | Enables ingress to a DBSecurityGroup using one of two forms of authorization. First, EC2 or VPC security groups can be added to the DBSecurityGroup if the application using the database is running on EC2 or VPC instances. Second, IP ranges are available if the application accessing your database is running on the internet. Required parameters for this API are one of CIDR range, EC2SecurityGroupId for VPC, or (EC2SecurityGroupOwnerId and either EC2SecurityGroupName or EC2SecurityGroupId for non-VPC). You can't authorize ingress from an EC2 security group in one Amazon Web Services Region to an Amazon RDS DB instance in another. You can't authorize ingress from a VPC security group in one VPC to an Amazon RDS DB instance in another. For an overview of CIDR ranges, go to the Wikipedia Tutorial. EC2-Classic was retired on August 15, 2022. If you haven't migrated from EC2-Classic to a VPC, we recommend that you migrate as soon as possible. For more information, see Migrate from EC2-Classic to a VPC in the Amazon EC2 User Guide, the blog EC2-Classic Networking is Retiring – Here’s How to Prepare, and Moving a DB instance not in a VPC into a VPC in the Amazon RDS User Guide. |
| POST | / | Backtracks a DB cluster to a specific time, without creating a new DB cluster. For more information on backtracking, see Backtracking an Aurora DB Cluster in the Amazon Aurora User Guide. This action applies only to Aurora MySQL DB clusters. |
| POST | / | Cancels an export task in progress that is exporting a snapshot or cluster to Amazon S3. Any data that has already been written to the S3 bucket isn't removed. |
| POST | / | Copies the specified DB cluster parameter group. You can't copy a default DB cluster parameter group. Instead, create a new custom DB cluster parameter group, which copies the default parameters and values for the specified DB cluster parameter group family. |
| POST | / | Copies a snapshot of a DB cluster. To copy a DB cluster snapshot from a shared manual DB cluster snapshot, SourceDBClusterSnapshotIdentifier must be the Amazon Resource Name (ARN) of the shared DB cluster snapshot. You can copy an encrypted DB cluster snapshot from another Amazon Web Services Region. In that case, the Amazon Web Services Region where you call the CopyDBClusterSnapshot operation is the destination Amazon Web Services Region for the encrypted DB cluster snapshot to be copied to. To copy an encrypted DB cluster snapshot from another Amazon Web Services Region, you must provide the following values: KmsKeyId - The Amazon Web Services Key Management System (Amazon Web Services KMS) key identifier for the key to use to encrypt the copy of the DB cluster snapshot in the destination Amazon Web Services Region. TargetDBClusterSnapshotIdentifier - The identifier for the new copy of the DB cluster snapshot in the destination Amazon Web Services Region. SourceDBClusterSnapshotIdentifier - The DB cluster snapshot identifier for the encrypted DB cluster snapshot to be copied. This identifier must be in the ARN format for the source Amazon Web Services Region and is the same value as the SourceDBClusterSnapshotIdentifier in the presigned URL. To cancel the copy operation once it is in progress, delete the target DB cluster snapshot identified by TargetDBClusterSnapshotIdentifier while that DB cluster snapshot is in "copying" status. For more information on copying encrypted Amazon Aurora DB cluster snapshots from one Amazon Web Services Region to another, see Copying a Snapshot in the Amazon Aurora User Guide. For more information on Amazon Aurora DB clusters, see What is Amazon Aurora? in the Amazon Aurora User Guide. For more information on Multi-AZ DB clusters, see Multi-AZ DB cluster deployments in the Amazon RDS User Guide. |
| POST | / | Copies the specified DB parameter group. You can't copy a default DB parameter group. Instead, create a new custom DB parameter group, which copies the default parameters and values for the specified DB parameter group family. |
| POST | / | Copies the specified DB snapshot. The source DB snapshot must be in the available state. You can copy a snapshot from one Amazon Web Services Region to another. In that case, the Amazon Web Services Region where you call the CopyDBSnapshot operation is the destination Amazon Web Services Region for the DB snapshot copy. This command doesn't apply to RDS Custom. For more information about copying snapshots, see Copying a DB Snapshot in the Amazon RDS User Guide. |
| POST | / | Copies the specified option group. |
| POST | / | Creates a blue/green deployment. A blue/green deployment creates a staging environment that copies the production environment. In a blue/green deployment, the blue environment is the current production environment. The green environment is the staging environment. The staging environment stays in sync with the current production environment using logical replication. You can make changes to the databases in the green environment without affecting production workloads. For example, you can upgrade the major or minor DB engine version, change database parameters, or make schema changes in the staging environment. You can thoroughly test changes in the green environment. When ready, you can switch over the environments to promote the green environment to be the new production environment. The switchover typically takes under a minute. For more information, see Using Amazon RDS Blue/Green Deployments for database updates in the Amazon RDS User Guide and Using Amazon RDS Blue/Green Deployments for database updates in the Amazon Aurora User Guide. |
| POST | / | Creates a custom DB engine version (CEV). |
| POST | / | Creates a new Amazon Aurora DB cluster or Multi-AZ DB cluster. If you create an Aurora DB cluster, the request creates an empty cluster. You must explicitly create the writer instance for your DB cluster using the CreateDBInstance operation. If you create a Multi-AZ DB cluster, the request creates a writer and two reader DB instances for you, each in a different Availability Zone. You can use the ReplicationSourceIdentifier parameter to create an Amazon Aurora DB cluster as a read replica of another DB cluster or Amazon RDS for MySQL or PostgreSQL DB instance. For more information about Amazon Aurora, see What is Amazon Aurora? in the Amazon Aurora User Guide. You can also use the ReplicationSourceIdentifier parameter to create a Multi-AZ DB cluster read replica with an RDS for MySQL or PostgreSQL DB instance as the source. For more information about Multi-AZ DB clusters, see Multi-AZ DB cluster deployments in the Amazon RDS User Guide. |
| POST | / | Creates a new custom endpoint and associates it with an Amazon Aurora DB cluster. This action applies only to Aurora DB clusters. |
| POST | / | Creates a new DB cluster parameter group. Parameters in a DB cluster parameter group apply to all of the instances in a DB cluster. A DB cluster parameter group is initially created with the default parameters for the database engine used by instances in the DB cluster. To provide custom values for any of the parameters, you must modify the group after creating it using ModifyDBClusterParameterGroup. Once you've created a DB cluster parameter group, you need to associate it with your DB cluster using ModifyDBCluster. When you associate a new DB cluster parameter group with a running Aurora DB cluster, reboot the DB instances in the DB cluster without failover for the new DB cluster parameter group and associated settings to take effect. When you associate a new DB cluster parameter group with a running Multi-AZ DB cluster, reboot the DB cluster without failover for the new DB cluster parameter group and associated settings to take effect. After you create a DB cluster parameter group, you should wait at least 5 minutes before creating your first DB cluster that uses that DB cluster parameter group as the default parameter group. This allows Amazon RDS to fully complete the create action before the DB cluster parameter group is used as the default for a new DB cluster. This is especially important for parameters that are critical when creating the default database for a DB cluster, such as the character set for the default database defined by the character_set_database parameter. You can use the Parameter Groups option of the Amazon RDS console or the DescribeDBClusterParameters operation to verify that your DB cluster parameter group has been created or modified. For more information on Amazon Aurora, see What is Amazon Aurora? in the Amazon Aurora User Guide. For more information on Multi-AZ DB clusters, see Multi-AZ DB cluster deployments in the Amazon RDS User Guide. |
| POST | / | Creates a snapshot of a DB cluster. For more information on Amazon Aurora, see What is Amazon Aurora? in the Amazon Aurora User Guide. For more information on Multi-AZ DB clusters, see Multi-AZ DB cluster deployments in the Amazon RDS User Guide. |
| POST | / | Creates a new DB instance. The new DB instance can be an RDS DB instance, or it can be a DB instance in an Aurora DB cluster. For an Aurora DB cluster, you can call this operation multiple times to add more than one DB instance to the cluster. For more information about creating an RDS DB instance, see Creating an Amazon RDS DB instance in the Amazon RDS User Guide. For more information about creating a DB instance in an Aurora DB cluster, see Creating an Amazon Aurora DB cluster in the Amazon Aurora User Guide. |
| POST | / | Creates a new DB instance that acts as a read replica for an existing source DB instance or Multi-AZ DB cluster. You can create a read replica for a DB instance running Db2, MariaDB, MySQL, Oracle, PostgreSQL, or SQL Server. You can create a read replica for a Multi-AZ DB cluster running MySQL or PostgreSQL. For more information, see Working with read replicas and Migrating from a Multi-AZ DB cluster to a DB instance using a read replica in the Amazon RDS User Guide. Amazon Aurora doesn't support this operation. To create a DB instance for an Aurora DB cluster, use the CreateDBInstance operation. All read replica DB instances are created with backups disabled. All other attributes (including DB security groups and DB parameter groups) are inherited from the source DB instance or cluster, except as specified. Your source DB instance or cluster must have backup retention enabled. |
| POST | / | Creates a new DB parameter group. A DB parameter group is initially created with the default parameters for the database engine used by the DB instance. To provide custom values for any of the parameters, you must modify the group after creating it using ModifyDBParameterGroup. Once you've created a DB parameter group, you need to associate it with your DB instance using ModifyDBInstance. When you associate a new DB parameter group with a running DB instance, you need to reboot the DB instance without failover for the new DB parameter group and associated settings to take effect. This command doesn't apply to RDS Custom. After you create a DB parameter group, you should wait at least 5 minutes before creating your first DB instance that uses that DB parameter group as the default parameter group. This allows Amazon RDS to fully complete the create action before the parameter group is used as the default for a new DB instance. This is especially important for parameters that are critical when creating the default database for a DB instance, such as the character set for the default database defined by the character_set_database parameter. You can use the Parameter Groups option of the Amazon RDS console or the DescribeDBParameters command to verify that your DB parameter group has been created or modified. |
| POST | / | Creates a new DB proxy. |
| POST | / | Creates a DBProxyEndpoint. Only applies to proxies that are associated with Aurora DB clusters. You can use DB proxy endpoints to specify read/write or read-only access to the DB cluster. You can also use DB proxy endpoints to access a DB proxy through a different VPC than the proxy's default VPC. |
| POST | / | Creates a new DB security group. DB security groups control access to a DB instance. A DB security group controls access to EC2-Classic DB instances that are not in a VPC. EC2-Classic was retired on August 15, 2022. If you haven't migrated from EC2-Classic to a VPC, we recommend that you migrate as soon as possible. For more information, see Migrate from EC2-Classic to a VPC in the Amazon EC2 User Guide, the blog EC2-Classic Networking is Retiring – Here’s How to Prepare, and Moving a DB instance not in a VPC into a VPC in the Amazon RDS User Guide. |
| POST | / | Creates a new DB shard group for Aurora Limitless Database. You must enable Aurora Limitless Database to create a DB shard group. Valid for: Aurora DB clusters only |
| POST | / | Creates a snapshot of a DB instance. The source DB instance must be in the available or storage-optimization state. |
| POST | / | Creates a new DB subnet group. DB subnet groups must contain at least one subnet in at least two AZs in the Amazon Web Services Region. |
| POST | / | Creates an RDS event notification subscription. This operation requires a topic Amazon Resource Name (ARN) created by either the RDS console, the SNS console, or the SNS API. To obtain an ARN with SNS, you must create a topic in Amazon SNS and subscribe to the topic. The ARN is displayed in the SNS console. You can specify the type of source (SourceType) that you want to be notified of and provide a list of RDS sources (SourceIds) that triggers the events. You can also provide a list of event categories (EventCategories) for events that you want to be notified of. For example, you can specify SourceType = db-instance, SourceIds = mydbinstance1, mydbinstance2 and EventCategories = Availability, Backup. If you specify both the SourceType and SourceIds, such as SourceType = db-instance and SourceIds = myDBInstance1, you are notified of all the db-instance events for the specified source. If you specify a SourceType but do not specify SourceIds, you receive notice of the events for that source type for all your RDS sources. If you don't specify either the SourceType or the SourceIds, you are notified of events generated from all RDS sources belonging to your customer account. For more information about subscribing to an event for RDS DB engines, see Subscribing to Amazon RDS event notification in the Amazon RDS User Guide. For more information about subscribing to an event for Aurora DB engines, see Subscribing to Amazon RDS event notification in the Amazon Aurora User Guide. |
| POST | / | Creates an Aurora global database spread across multiple Amazon Web Services Regions. The global database contains a single primary cluster with read-write capability, and a read-only secondary cluster that receives data from the primary cluster through high-speed replication performed by the Aurora storage subsystem. You can create a global database that is initially empty, and then create the primary and secondary DB clusters in the global database. Or you can specify an existing Aurora cluster during the create operation, and this cluster becomes the primary cluster of the global database. This operation applies only to Aurora DB clusters. |
| POST | / | Creates a zero-ETL integration with Amazon Redshift. |
| POST | / | Creates a new option group. You can create up to 20 option groups. This command doesn't apply to RDS Custom. |
| POST | / | Creates a tenant database in a DB instance that uses the multi-tenant configuration. Only RDS for Oracle container database (CDB) instances are supported. |
| POST | / | Deletes a blue/green deployment. For more information, see Using Amazon RDS Blue/Green Deployments for database updates in the Amazon RDS User Guide and Using Amazon RDS Blue/Green Deployments for database updates in the Amazon Aurora User Guide. |
| POST | / | Deletes a custom engine version. To run this command, make sure you meet the following prerequisites: The CEV must not be the default for RDS Custom. If it is, change the default before running this command. The CEV must not be associated with an RDS Custom DB instance, RDS Custom instance snapshot, or automated backup of your RDS Custom instance. Typically, deletion takes a few minutes. The MediaImport service that imports files from Amazon S3 to create CEVs isn't integrated with Amazon Web Services CloudTrail. If you turn on data logging for Amazon RDS in CloudTrail, calls to the DeleteCustomDbEngineVersion event aren't logged. However, you might see calls from the API gateway that accesses your Amazon S3 bucket. These calls originate from the MediaImport service for the DeleteCustomDbEngineVersion event. For more information, see Deleting a CEV in the Amazon RDS User Guide. |
| POST | / | The DeleteDBCluster action deletes a previously provisioned DB cluster. When you delete a DB cluster, all automated backups for that DB cluster are deleted and can't be recovered. Manual DB cluster snapshots of the specified DB cluster are not deleted. If you're deleting a Multi-AZ DB cluster with read replicas, all cluster members are terminated and read replicas are promoted to standalone instances. For more information on Amazon Aurora, see What is Amazon Aurora? in the Amazon Aurora User Guide. For more information on Multi-AZ DB clusters, see Multi-AZ DB cluster deployments in the Amazon RDS User Guide. |
| POST | / | Deletes automated backups using the DbClusterResourceId value of the source DB cluster or the Amazon Resource Name (ARN) of the automated backups. |
| POST | / | Deletes a custom endpoint and removes it from an Amazon Aurora DB cluster. This action only applies to Aurora DB clusters. |
| POST | / | Deletes a specified DB cluster parameter group. The DB cluster parameter group to be deleted can't be associated with any DB clusters. For more information on Amazon Aurora, see What is Amazon Aurora? in the Amazon Aurora User Guide. For more information on Multi-AZ DB clusters, see Multi-AZ DB cluster deployments in the Amazon RDS User Guide. |
| POST | / | Deletes a DB cluster snapshot. If the snapshot is being copied, the copy operation is terminated. The DB cluster snapshot must be in the available state to be deleted. For more information on Amazon Aurora, see What is Amazon Aurora? in the Amazon Aurora User Guide. For more information on Multi-AZ DB clusters, see Multi-AZ DB cluster deployments in the Amazon RDS User Guide. |
| POST | / | Deletes a previously provisioned DB instance. When you delete a DB instance, all automated backups for that instance are deleted and can't be recovered. However, manual DB snapshots of the DB instance aren't deleted. If you request a final DB snapshot, the status of the Amazon RDS DB instance is deleting until the DB snapshot is created. This operation can't be canceled or reverted after it begins. To monitor the status of this operation, use DescribeDBInstance. When a DB instance is in a failure state and has a status of failed, incompatible-restore, or incompatible-network, you can only delete it when you skip creation of the final snapshot with the SkipFinalSnapshot parameter. If the specified DB instance is part of an Amazon Aurora DB cluster, you can't delete the DB instance if both of the following conditions are true: The DB cluster is a read replica of another Amazon Aurora DB cluster. The DB instance is the only instance in the DB cluster. To delete a DB instance in this case, first use the PromoteReadReplicaDBCluster operation to promote the DB cluster so that it's no longer a read replica. After the promotion completes, use the DeleteDBInstance operation to delete the final instance in the DB cluster. For RDS Custom DB instances, deleting the DB instance permanently deletes the EC2 instance and the associated EBS volumes. Make sure that you don't terminate or delete these resources before you delete the DB instance. Otherwise, deleting the DB instance and creation of the final snapshot might fail. |
| POST | / | Deletes automated backups using the DbiResourceId value of the source DB instance or the Amazon Resource Name (ARN) of the automated backups. |
| POST | / | Deletes a specified DB parameter group. The DB parameter group to be deleted can't be associated with any DB instances. |
| POST | / | Deletes an existing DB proxy. |
| POST | / | Deletes a DBProxyEndpoint. Doing so removes the ability to access the DB proxy using the endpoint that you defined. The endpoint that you delete might have provided capabilities such as read/write or read-only operations, or using a different VPC than the DB proxy's default VPC. |
| POST | / | Deletes a DB security group. The specified DB security group must not be associated with any DB instances. EC2-Classic was retired on August 15, 2022. If you haven't migrated from EC2-Classic to a VPC, we recommend that you migrate as soon as possible. For more information, see Migrate from EC2-Classic to a VPC in the Amazon EC2 User Guide, the blog EC2-Classic Networking is Retiring – Here’s How to Prepare, and Moving a DB instance not in a VPC into a VPC in the Amazon RDS User Guide. |
| POST | / | Deletes an Aurora Limitless Database DB shard group. |
| POST | / | Deletes a DB snapshot. If the snapshot is being copied, the copy operation is terminated. The DB snapshot must be in the available state to be deleted. |
| POST | / | Deletes a DB subnet group. The specified database subnet group must not be associated with any DB instances. |
| POST | / | Deletes an RDS event notification subscription. |
| POST | / | Deletes a global database cluster. The primary and secondary clusters must already be detached or destroyed first. This action only applies to Aurora DB clusters. |
| POST | / | Deletes a zero-ETL integration with Amazon Redshift. |
| POST | / | Deletes an existing option group. |
| POST | / | Deletes a tenant database from your DB instance. This command only applies to RDS for Oracle container database (CDB) instances. You can't delete a tenant database when it is the only tenant in the DB instance. |
| POST | / | Remove the association between one or more DBProxyTarget data structures and a DBProxyTargetGroup. |
| POST | / | Lists all of the attributes for a customer account. The attributes include Amazon RDS quotas for the account, such as the number of DB instances allowed. The description for a quota includes the quota name, current usage toward that quota, and the quota's maximum value. This command doesn't take any parameters. |
| POST | / | Describes one or more blue/green deployments. For more information, see Using Amazon RDS Blue/Green Deployments for database updates in the Amazon RDS User Guide and Using Amazon RDS Blue/Green Deployments for database updates in the Amazon Aurora User Guide. |
| POST | / | Lists the set of certificate authority (CA) certificates provided by Amazon RDS for this Amazon Web Services account. For more information, see Using SSL/TLS to encrypt a connection to a DB instance in the Amazon RDS User Guide and Using SSL/TLS to encrypt a connection to a DB cluster in the Amazon Aurora User Guide. |
| POST | / | Displays backups for both current and deleted DB clusters. For example, use this operation to find details about automated backups for previously deleted clusters. Current clusters are returned for both the DescribeDBClusterAutomatedBackups and DescribeDBClusters operations. All parameters are optional. |
| POST | / | Returns information about backtracks for a DB cluster. For more information on Amazon Aurora, see What is Amazon Aurora? in the Amazon Aurora User Guide. This action only applies to Aurora MySQL DB clusters. |
| POST | / | Returns information about endpoints for an Amazon Aurora DB cluster. This action only applies to Aurora DB clusters. |
| POST | / | Returns a list of DBClusterParameterGroup descriptions. If a DBClusterParameterGroupName parameter is specified, the list will contain only the description of the specified DB cluster parameter group. For more information on Amazon Aurora, see What is Amazon Aurora? in the Amazon Aurora User Guide. For more information on Multi-AZ DB clusters, see Multi-AZ DB cluster deployments in the Amazon RDS User Guide. |
| POST | / | Returns the detailed parameter list for a particular DB cluster parameter group. For more information on Amazon Aurora, see What is Amazon Aurora? in the Amazon Aurora User Guide. For more information on Multi-AZ DB clusters, see Multi-AZ DB cluster deployments in the Amazon RDS User Guide. |
| POST | / | Returns a list of DB cluster snapshot attribute names and values for a manual DB cluster snapshot. When sharing snapshots with other Amazon Web Services accounts, DescribeDBClusterSnapshotAttributes returns the restore attribute and a list of IDs for the Amazon Web Services accounts that are authorized to copy or restore the manual DB cluster snapshot. If all is included in the list of values for the restore attribute, then the manual DB cluster snapshot is public and can be copied or restored by all Amazon Web Services accounts. To add or remove access for an Amazon Web Services account to copy or restore a manual DB cluster snapshot, or to make the manual DB cluster snapshot public or private, use the ModifyDBClusterSnapshotAttribute API action. |
| POST | / | Returns information about DB cluster snapshots. This API action supports pagination. For more information on Amazon Aurora DB clusters, see What is Amazon Aurora? in the Amazon Aurora User Guide. For more information on Multi-AZ DB clusters, see Multi-AZ DB cluster deployments in the Amazon RDS User Guide. |
| POST | / | Describes existing Amazon Aurora DB clusters and Multi-AZ DB clusters. This API supports pagination. For more information on Amazon Aurora DB clusters, see What is Amazon Aurora? in the Amazon Aurora User Guide. For more information on Multi-AZ DB clusters, see Multi-AZ DB cluster deployments in the Amazon RDS User Guide. This operation can also return information for Amazon Neptune DB instances and Amazon DocumentDB instances. |
| POST | / | Describes the properties of specific versions of DB engines. |
| POST | / | Displays backups for both current and deleted instances. For example, use this operation to find details about automated backups for previously deleted instances. Current instances with retention periods greater than zero (0) are returned for both the DescribeDBInstanceAutomatedBackups and DescribeDBInstances operations. All parameters are optional. |
| POST | / | Describes provisioned RDS instances. This API supports pagination. This operation can also return information for Amazon Neptune DB instances and Amazon DocumentDB instances. |
| POST | / | Returns a list of DB log files for the DB instance. This command doesn't apply to RDS Custom. |
| POST | / | Returns a list of DBParameterGroup descriptions. If a DBParameterGroupName is specified, the list will contain only the description of the specified DB parameter group. |
| POST | / | Returns the detailed parameter list for a particular DB parameter group. |
| POST | / | Returns information about DB proxies. |
| POST | / | Returns information about DB proxy endpoints. |
| POST | / | Returns information about DB proxy target groups, represented by DBProxyTargetGroup data structures. |
| POST | / | Returns information about DBProxyTarget objects. This API supports pagination. |
| POST | / | Describes the recommendations to resolve the issues for your DB instances, DB clusters, and DB parameter groups. |
| POST | / | Returns a list of DBSecurityGroup descriptions. If a DBSecurityGroupName is specified, the list will contain only the descriptions of the specified DB security group. EC2-Classic was retired on August 15, 2022. If you haven't migrated from EC2-Classic to a VPC, we recommend that you migrate as soon as possible. For more information, see Migrate from EC2-Classic to a VPC in the Amazon EC2 User Guide, the blog EC2-Classic Networking is Retiring – Here’s How to Prepare, and Moving a DB instance not in a VPC into a VPC in the Amazon RDS User Guide. |
| POST | / | Describes existing Aurora Limitless Database DB shard groups. |
| POST | / | Returns a list of DB snapshot attribute names and values for a manual DB snapshot. When sharing snapshots with other Amazon Web Services accounts, DescribeDBSnapshotAttributes returns the restore attribute and a list of IDs for the Amazon Web Services accounts that are authorized to copy or restore the manual DB snapshot. If all is included in the list of values for the restore attribute, then the manual DB snapshot is public and can be copied or restored by all Amazon Web Services accounts. To add or remove access for an Amazon Web Services account to copy or restore a manual DB snapshot, or to make the manual DB snapshot public or private, use the ModifyDBSnapshotAttribute API action. |
| POST | / | Describes the tenant databases that exist in a DB snapshot. This command only applies to RDS for Oracle DB instances in the multi-tenant configuration. You can use this command to inspect the tenant databases within a snapshot before restoring it. You can't directly interact with the tenant databases in a DB snapshot. If you restore a snapshot that was taken from DB instance using the multi-tenant configuration, you restore all its tenant databases. |
| POST | / | Returns information about DB snapshots. This API action supports pagination. |
| POST | / | Returns a list of DBSubnetGroup descriptions. If a DBSubnetGroupName is specified, the list will contain only the descriptions of the specified DBSubnetGroup. For an overview of CIDR ranges, go to the Wikipedia Tutorial. |
| POST | / | Returns the default engine and system parameter information for the cluster database engine. For more information on Amazon Aurora, see What is Amazon Aurora? in the Amazon Aurora User Guide. |
| POST | / | Returns the default engine and system parameter information for the specified database engine. |
| POST | / | Displays a list of categories for all event source types, or, if specified, for a specified source type. You can also see this list in the "Amazon RDS event categories and event messages" section of the Amazon RDS User Guide or the Amazon Aurora User Guide . |
| POST | / | Lists all the subscription descriptions for a customer account. The description for a subscription includes SubscriptionName, SNSTopicARN, CustomerID, SourceType, SourceID, CreationTime, and Status. If you specify a SubscriptionName, lists the description for that subscription. |
| POST | / | Returns events related to DB instances, DB clusters, DB parameter groups, DB security groups, DB snapshots, DB cluster snapshots, and RDS Proxies for the past 14 days. Events specific to a particular DB instance, DB cluster, DB parameter group, DB security group, DB snapshot, DB cluster snapshot group, or RDS Proxy can be obtained by providing the name as a parameter. For more information on working with events, see Monitoring Amazon RDS events in the Amazon RDS User Guide and Monitoring Amazon Aurora events in the Amazon Aurora User Guide. By default, RDS returns events that were generated in the past hour. |
| POST | / | Returns information about a snapshot or cluster export to Amazon S3. This API operation supports pagination. |
| POST | / | Returns information about Aurora global database clusters. This API supports pagination. For more information on Amazon Aurora, see What is Amazon Aurora? in the Amazon Aurora User Guide. This action only applies to Aurora DB clusters. |
| POST | / | Describe one or more zero-ETL integrations with Amazon Redshift. |
| POST | / | Describes all available options for the specified engine. |
| POST | / | Describes the available option groups. |
| POST | / | Describes the orderable DB instance options for a specified DB engine. |
| POST | / | Returns a list of resources (for example, DB instances) that have at least one pending maintenance action. This API follows an eventual consistency model. This means that the result of the DescribePendingMaintenanceActions command might not be immediately visible to all subsequent RDS commands. Keep this in mind when you use DescribePendingMaintenanceActions immediately after using a previous API command such as ApplyPendingMaintenanceActions. |
| POST | / | Returns information about reserved DB instances for this account, or about a specified reserved DB instance. |
| POST | / | Lists available reserved DB instance offerings. |
| POST | / | Returns a list of the source Amazon Web Services Regions where the current Amazon Web Services Region can create a read replica, copy a DB snapshot from, or replicate automated backups from. Use this operation to determine whether cross-Region features are supported between other Regions and your current Region. This operation supports pagination. To return information about the Regions that are enabled for your account, or all Regions, use the EC2 operation DescribeRegions. For more information, see DescribeRegions in the Amazon EC2 API Reference. |
| POST | / | Describes the tenant databases in a DB instance that uses the multi-tenant configuration. Only RDS for Oracle CDB instances are supported. |
| POST | / | You can call DescribeValidDBInstanceModifications to learn what modifications you can make to your DB instance. You can use this information when you call ModifyDBInstance. This command doesn't apply to RDS Custom. |
| POST | / | Disables the HTTP endpoint for the specified DB cluster. Disabling this endpoint disables RDS Data API. For more information, see Using RDS Data API in the Amazon Aurora User Guide. This operation applies only to Aurora PostgreSQL Serverless v2 and provisioned DB clusters. To disable the HTTP endpoint for Aurora Serverless v1 DB clusters, use the EnableHttpEndpoint parameter of the ModifyDBCluster operation. |
| POST | / | Downloads all or a portion of the specified log file, up to 1 MB in size. This command doesn't apply to RDS Custom. |
| POST | / | Enables the HTTP endpoint for the DB cluster. By default, the HTTP endpoint isn't enabled. When enabled, this endpoint provides a connectionless web service API (RDS Data API) for running SQL queries on the Aurora DB cluster. You can also query your database from inside the RDS console with the RDS query editor. For more information, see Using RDS Data API in the Amazon Aurora User Guide. This operation applies only to Aurora PostgreSQL Serverless v2 and provisioned DB clusters. To enable the HTTP endpoint for Aurora Serverless v1 DB clusters, use the EnableHttpEndpoint parameter of the ModifyDBCluster operation. |
| POST | / | Forces a failover for a DB cluster. For an Aurora DB cluster, failover for a DB cluster promotes one of the Aurora Replicas (read-only instances) in the DB cluster to be the primary DB instance (the cluster writer). For a Multi-AZ DB cluster, after RDS terminates the primary DB instance, the internal monitoring system detects that the primary DB instance is unhealthy and promotes a readable standby (read-only instances) in the DB cluster to be the primary DB instance (the cluster writer). Failover times are typically less than 35 seconds. An Amazon Aurora DB cluster automatically fails over to an Aurora Replica, if one exists, when the primary DB instance fails. A Multi-AZ DB cluster automatically fails over to a readable standby DB instance when the primary DB instance fails. To simulate a failure of a primary instance for testing, you can force a failover. Because each instance in a DB cluster has its own endpoint address, make sure to clean up and re-establish any existing connections that use those endpoint addresses when the failover is complete. For more information on Amazon Aurora DB clusters, see What is Amazon Aurora? in the Amazon Aurora User Guide. For more information on Multi-AZ DB clusters, see Multi-AZ DB cluster deployments in the Amazon RDS User Guide. |
| POST | / | Promotes the specified secondary DB cluster to be the primary DB cluster in the global database cluster to fail over or switch over a global database. Switchover operations were previously called "managed planned failovers." Although this operation can be used either to fail over or to switch over a global database cluster, its intended use is for global database failover. To switch over a global database cluster, we recommend that you use the SwitchoverGlobalCluster operation instead. How you use this operation depends on whether you are failing over or switching over your global database cluster: Failing over - Specify the AllowDataLoss parameter and don't specify the Switchover parameter. Switching over - Specify the Switchover parameter or omit it, but don't specify the AllowDataLoss parameter. About failing over and switching over While failing over and switching over a global database cluster both change the primary DB cluster, you use these operations for different reasons: Failing over - Use this operation to respond to an unplanned event, such as a Regional disaster in the primary Region. Failing over can result in a loss of write transaction data that wasn't replicated to the chosen secondary before the failover event occurred. However, the recovery process that promotes a DB instance on the chosen seconday DB cluster to be the primary writer DB instance guarantees that the data is in a transactionally consistent state. For more information about failing over an Amazon Aurora global database, see Performing managed failovers for Aurora global databases in the Amazon Aurora User Guide. Switching over - Use this operation on a healthy global database cluster for planned events, such as Regional rotation or to fail back to the original primary DB cluster after a failover operation. With this operation, there is no data loss. For more information about switching over an Amazon Aurora global database, see Performing switchovers for Aurora global databases in the Amazon Aurora User Guide. |
| POST | / | Lists all tags on an Amazon RDS resource. For an overview on tagging an Amazon RDS resource, see Tagging Amazon RDS Resources in the Amazon RDS User Guide. |
| POST | / | Changes the audit policy state of a database activity stream to either locked (default) or unlocked. A locked policy is read-only, whereas an unlocked policy is read/write. If your activity stream is started and locked, you can unlock it, customize your audit policy, and then lock your activity stream. Restarting the activity stream isn |
…(truncated)