Motion Design Principles
Motion should explain, direct attention, or connect two states. If it does none of those, cut it.
Agents tend to over-animate: everything slides, bounces, and fades at once. This skill gives concrete defaults and a critique checklist. It is framework-neutral; apply it in Remotion, HyperFrames, CSS, or any keyframe tool.
When to Use
- Choosing durations and easing for a composition
- Laying out titles, lower thirds, and captions across aspect ratios
- Critiquing a draft render that feels busy, slow, or hard to read
- Making animated output accessible (reduced motion, flashing)
Workflow
Step 1: Think in Frames, Not Milliseconds
Video renders at a fixed frame rate, so durations are frame counts. Convert once and keep a table in the project.
| Duration |
24 fps |
30 fps |
60 fps |
| 0.2 s |
4.8 → 5 |
6 |
12 |
| 0.5 s |
12 |
15 |
30 |
| 1 s |
24 |
30 |
60 |
Round to whole frames. Keep the composition frame rate equal to the source footage frame rate; YouTube's upload guidance is to encode at the frame rate the content was recorded at.
Step 2: Pick Durations by Distance and Importance
Starting points, then judge by eye:
| Motion |
Typical range |
Notes |
| Small UI feedback (highlight, press) |
~0.1–0.2 s |
Should feel instant |
| Element entering / leaving |
~0.25–0.5 s |
Larger distance → longer |
| Full-frame transition / scene change |
~0.4–0.8 s |
Longer feels "cinematic", then "slow" |
| Hold on readable text |
Long enough to read twice |
See Step 5 |
For reference, Material Design 3's motion tokens span 50 ms (short1) to 1000 ms (extra-long4); UI transitions generally sit in the short-to-medium band. Video titles can hold longer because the viewer is not trying to act.
Step 3: Ease Almost Everything
Linear motion reads as mechanical. Use linear only for continuous motion (tickers, progress bars, rotation loops) or when matching a physical constant speed.
| Intent |
Curve |
Example (Material 3 token values) |
| Default move between two on-screen positions |
Standard |
cubic-bezier(0.2, 0, 0, 1) |
| Entering the frame (arrive and settle) |
Decelerate |
cubic-bezier(0.05, 0.7, 0.1, 1) (emphasized decelerate) |
| Leaving the frame (gather speed, exit) |
Accelerate |
cubic-bezier(0.3, 0, 0.8, 0.15) (emphasized accelerate) |
Rules:
- Enter with ease-out, exit with ease-in. Exits are usually shorter than entrances.
- Overshoot / springs sparingly. One springy element per scene draws the eye; five is noise.
- Use the framework's interpolation helpers (for example Remotion's
interpolate/spring, or the animation library a HyperFrames composition uses) rather than hand-rolled math. See their official skills.
Step 4: Direct Attention with Hierarchy and Stagger
- One focal point per moment. Animate the thing the VO is talking about; keep everything else still.
- Stagger related elements (list items, chart bars) by a few frames each so the eye reads them in order. Keep total stagger short enough that the last item arrives before the viewer loses interest.
- Motion direction should mean something: content that "comes next" enters from the reading direction; dismissed content leaves the way it came.
- Change one property at a time when possible (position or scale or opacity), especially on text.
Step 5: Make On-Screen Text Readable
- Size for the smallest screen it will play on. Vertical social video is watched on phones; test by viewing the render on a phone, not a monitor.
- Contrast: text over footage needs a scrim, shadow, or solid plate. Check contrast on the busiest frame, not the calmest.
- Hold time: a line must stay still long enough to read it twice at a relaxed pace. Do not animate text while the viewer is reading it.
- Few words: on-screen text summarizes, it does not transcribe the VO. Captions handle the transcript.
- No orphan text: avoid a single word on the last line of a title.
Step 6: Respect Safe Areas and Aspect Ratios
Broadcast safe areas (EBU R 95, 16:9): keep essential action inside the action safe area (3.5% in from each edge) and graphics inside the graphics safe area (5% in from each edge). On the web these are a sensible minimum margin.
Social platforms overlay UI (captions, buttons, usernames, progress bars) on top of video, particularly in vertical feeds. Their safe-zone guidance changes; check the platform's current creative spec before final layout and keep text well inside the frame, away from the bottom and right edges in vertical feeds.
| Placement |
Aspect ratio |
Source |
| YouTube (standard player on computer) |
16:9 |
YouTube Help: recommended upload encoding settings |
| YouTube Shorts |
Square or vertical, up to 3 minutes |
YouTube Help: upload Shorts |
| Instagram Reels, TikTok, other vertical feeds |
Commonly 9:16 vertical |
Check each platform's current spec page |
| LinkedIn, X, feed posts |
Varies by placement (landscape, square, vertical) |
Check each platform's current spec page |
Plan composition per ratio: in 9:16, stack elements vertically and keep the subject in the middle band; in 16:9, use horizontal thirds.
Step 7: Make Motion Accessible
- Flashing: nothing may flash more than three times in any one-second period unless it stays below the general and red flash thresholds (WCAG 2.3.1). Avoid strobing transitions, rapid cuts between light and dark frames, and flickering glitch effects.
- Reduced motion in interactive output: when motion runs in a browser (HTML previews, embedded animations, animated landing pages), honour
prefers-reduced-motion:
.title { animation: slide-in 400ms cubic-bezier(0.05, 0.7, 0.1, 1) both; }
@media (prefers-reduced-motion: reduce) {
.title { animation: fade-in 200ms linear both; } /* replace movement with a fade */
}
- Rendered video cannot read user preferences. Keep large-scale panning, zooming, and parallax restrained, and do not make motion the only carrier of information (Apple's HIG: "Make motion optional").
- Provide captions (see
captions-and-transcription).
Critique Checklist
Run this on every draft render:
Best Practices
- Store durations as frame constants at the composition's fps
- Default to ease-out for entrances and ease-in for exits; use linear only for continuous motion
- Animate one focal element at a time; keep the rest still
- Never animate text while it needs to be read
- Lay out each aspect ratio deliberately; do not rely on auto-crop
- Check platform safe zones from the platform's current spec, not from memory
- Treat flashing and large-scale motion as accessibility issues, not style choices
References
1---2name: motion-design-principles3description: |4 Practical motion design rules for agent-made videos and animated UI: timing in frames, easing, pacing, visual hierarchy, on-screen text readability, safe areas, aspect ratios per platform, and reduced-motion and flashing accessibility.5 Use this skill when designing or reviewing animation in a video (Remotion, HyperFrames, After Effects-style work) or in a web UI, or when a render "feels off" and needs a critique.6 Activate when: motion design, animation timing, easing, cubic-bezier, pacing, kinetic typography, title card, lower third, safe area, title safe, aspect ratio, 9:16, vertical video, reduced motion, prefers-reduced-motion, flashing content.7metadata:8 source: https://skillmd.com/skills/latestaiagents/motion-design-principles9---1011# Motion Design Principles1213**Motion should explain, direct attention, or connect two states. If it does none of those, cut it.**1415Agents tend to over-animate: everything slides, bounces, and fades at once. This skill gives concrete defaults and a critique checklist. It is framework-neutral; apply it in Remotion, HyperFrames, CSS, or any keyframe tool.1617## When to Use1819- Choosing durations and easing for a composition20- Laying out titles, lower thirds, and captions across aspect ratios21- Critiquing a draft render that feels busy, slow, or hard to read22- Making animated output accessible (reduced motion, flashing)2324## Workflow2526### Step 1: Think in Frames, Not Milliseconds2728Video renders at a fixed frame rate, so durations are frame counts. Convert once and keep a table in the project.2930| Duration | 24 fps | 30 fps | 60 fps |31|----------|--------|--------|--------|32| 0.2 s | 4.8 → 5 | 6 | 12 |33| 0.5 s | 12 | 15 | 30 |34| 1 s | 24 | 30 | 60 |3536Round to whole frames. Keep the composition frame rate equal to the source footage frame rate; YouTube's upload guidance is to encode at the frame rate the content was recorded at.3738### Step 2: Pick Durations by Distance and Importance3940Starting points, then judge by eye:4142| Motion | Typical range | Notes |43|--------|---------------|-------|44| Small UI feedback (highlight, press) | ~0.1–0.2 s | Should feel instant |45| Element entering / leaving | ~0.25–0.5 s | Larger distance → longer |46| Full-frame transition / scene change | ~0.4–0.8 s | Longer feels "cinematic", then "slow" |47| Hold on readable text | Long enough to read twice | See Step 5 |4849For reference, Material Design 3's motion tokens span 50 ms (`short1`) to 1000 ms (`extra-long4`); UI transitions generally sit in the short-to-medium band. Video titles can hold longer because the viewer is not trying to act.5051### Step 3: Ease Almost Everything5253Linear motion reads as mechanical. Use linear only for continuous motion (tickers, progress bars, rotation loops) or when matching a physical constant speed.5455| Intent | Curve | Example (Material 3 token values) |56|--------|-------|-----------------------------------|57| Default move between two on-screen positions | Standard | `cubic-bezier(0.2, 0, 0, 1)` |58| Entering the frame (arrive and settle) | Decelerate | `cubic-bezier(0.05, 0.7, 0.1, 1)` (emphasized decelerate) |59| Leaving the frame (gather speed, exit) | Accelerate | `cubic-bezier(0.3, 0, 0.8, 0.15)` (emphasized accelerate) |6061Rules:6263- **Enter with ease-out, exit with ease-in.** Exits are usually shorter than entrances.64- **Overshoot / springs sparingly.** One springy element per scene draws the eye; five is noise.65- **Use the framework's interpolation helpers** (for example Remotion's `interpolate`/`spring`, or the animation library a HyperFrames composition uses) rather than hand-rolled math. See their official skills.6667### Step 4: Direct Attention with Hierarchy and Stagger6869- One focal point per moment. Animate the thing the VO is talking about; keep everything else still.70- Stagger related elements (list items, chart bars) by a few frames each so the eye reads them in order. Keep total stagger short enough that the last item arrives before the viewer loses interest.71- Motion direction should mean something: content that "comes next" enters from the reading direction; dismissed content leaves the way it came.72- Change one property at a time when possible (position *or* scale *or* opacity), especially on text.7374### Step 5: Make On-Screen Text Readable7576- **Size for the smallest screen it will play on.** Vertical social video is watched on phones; test by viewing the render on a phone, not a monitor.77- **Contrast:** text over footage needs a scrim, shadow, or solid plate. Check contrast on the busiest frame, not the calmest.78- **Hold time:** a line must stay still long enough to read it twice at a relaxed pace. Do not animate text while the viewer is reading it.79- **Few words:** on-screen text summarizes, it does not transcribe the VO. Captions handle the transcript.80- **No orphan text:** avoid a single word on the last line of a title.8182### Step 6: Respect Safe Areas and Aspect Ratios8384Broadcast safe areas (EBU R 95, 16:9): keep essential action inside the **action safe area** (3.5% in from each edge) and graphics inside the **graphics safe area** (5% in from each edge). On the web these are a sensible minimum margin.8586Social platforms overlay UI (captions, buttons, usernames, progress bars) on top of video, particularly in vertical feeds. Their safe-zone guidance changes; check the platform's current creative spec before final layout and keep text well inside the frame, away from the bottom and right edges in vertical feeds.8788| Placement | Aspect ratio | Source |89|-----------|--------------|--------|90| YouTube (standard player on computer) | 16:9 | YouTube Help: recommended upload encoding settings |91| YouTube Shorts | Square or vertical, up to 3 minutes | YouTube Help: upload Shorts |92| Instagram Reels, TikTok, other vertical feeds | Commonly 9:16 vertical | Check each platform's current spec page |93| LinkedIn, X, feed posts | Varies by placement (landscape, square, vertical) | Check each platform's current spec page |9495Plan composition per ratio: in 9:16, stack elements vertically and keep the subject in the middle band; in 16:9, use horizontal thirds.9697### Step 7: Make Motion Accessible9899- **Flashing:** nothing may flash more than three times in any one-second period unless it stays below the general and red flash thresholds (WCAG 2.3.1). Avoid strobing transitions, rapid cuts between light and dark frames, and flickering glitch effects.100- **Reduced motion in interactive output:** when motion runs in a browser (HTML previews, embedded animations, animated landing pages), honour `prefers-reduced-motion`:101102```css103.title { animation: slide-in 400ms cubic-bezier(0.05, 0.7, 0.1, 1) both; }104105@media (prefers-reduced-motion: reduce) {106 .title { animation: fade-in 200ms linear both; } /* replace movement with a fade */107}108```109110- **Rendered video cannot read user preferences.** Keep large-scale panning, zooming, and parallax restrained, and do not make motion the only carrier of information (Apple's HIG: "Make motion optional").111- Provide captions (see `captions-and-transcription`).112113## Critique Checklist114115Run this on every draft render:116117- [ ] Can you say what each animation is for?118- [ ] Is there exactly one focal point at each moment?119- [ ] Do entrances ease out and exits ease in?120- [ ] Is every text line still and readable for long enough?121- [ ] Do all text and key visuals sit inside safe areas in every aspect ratio?122- [ ] Any sequence with more than three flashes per second?123- [ ] Does it still make sense muted?124125## Best Practices1261271. Store durations as frame constants at the composition's fps1282. Default to ease-out for entrances and ease-in for exits; use linear only for continuous motion1293. Animate one focal element at a time; keep the rest still1304. Never animate text while it needs to be read1315. Lay out each aspect ratio deliberately; do not rely on auto-crop1326. Check platform safe zones from the platform's current spec, not from memory1337. Treat flashing and large-scale motion as accessibility issues, not style choices134135## References136137- Material Design 3 motion tokens (easing and duration values): https://github.com/material-components/material-web/blob/main/tokens/versions/v0_192/_md-sys-motion.scss138- Apple Human Interface Guidelines, Motion: https://developer.apple.com/design/human-interface-guidelines/motion139- EBU R 95, Safe areas for 16:9 television production: https://tech.ebu.ch/docs/r/r095.pdf140- MDN, `prefers-reduced-motion`: https://developer.mozilla.org/en-US/docs/Web/CSS/@media/prefers-reduced-motion141- WCAG 2.2 SC 2.3.1 Three Flashes or Below Threshold: https://www.w3.org/WAI/WCAG22/Understanding/three-flashes-or-below-threshold.html142- YouTube recommended upload encoding settings: https://support.google.com/youtube/answer/1722171143- YouTube Shorts upload requirements: https://support.google.com/youtube/answer/12779649