Dspy Miprov2

Optimize Prompts with MIPROv2

Guide the user through using dspy.MIPROv2, DSPy's most powerful prompt optimizer. MIPROv2 jointly optimizes instructions and few-shot demonstrations to maximize a metric on your training data.

Step 1 — Gather context

Before generating code, ask:

1. Training data size — How many labeled examples? MIPROv2 needs 50+ for "light", 100+ for "medium", 200+ for "heavy". Under 50 → use BootstrapFewShot first (see /dspy-bootstrap-few-shot).
2. Baseline accuracy — What is the current dev set score? Run dspy.Evaluate before optimizing so you know the improvement.
3. Compute budget — Rough cost/time tolerance? Maps to auto="light" ($1-2), auto="medium" ($5-10), or auto="heavy" (~$15-30).
4. Program structure — How many dspy.Predict / dspy.ChainOfThought modules? Each gets its own optimized instructions and demos, which affects total optimization cost.

What is MIPROv2

MIPROv2 (Multi-prompt Instruction PRoposal Optimizer v2) is DSPy's recommended optimizer for prompt optimization. Unlike simpler optimizers that only tune few-shot examples, MIPROv2 jointly optimizes:

1. Instructions — the natural-language task descriptions in each module's prompt
2. Few-shot demonstrations — the input-output examples included in each module's prompt

It works by proposing candidate instructions, bootstrapping demonstrations, and searching over combinations using Bayesian optimization. The result is a program with better prompts that produce higher-quality outputs.

When to use MIPROv2

Use MIPROv2 when:

• Production optimization — you want the best prompt quality DSPy can deliver
• 50+ training examples — MIPROv2 needs enough data to search effectively
• Both instructions and demos matter — you want the optimizer to tune everything, not just examples
• You have budget for multiple LM calls — MIPROv2 is more expensive than BootstrapFewShot but produces better results

Do NOT use MIPROv2 when:

• Fewer than 50 training examples — search cannot generalize from sparse data; use BootstrapFewShot first, then upgrade
• Your metric is weak or noisy — MIPROv2 optimizes whatever metric you give it; a metric that always returns 1.0 or is highly noisy produces garbage optimized prompts
• Still in development/exploration — run a few manual iterations first to confirm your program works; optimize last before production
• Instructions do not matter — if your task is pure extraction with no natural-language framing, BootstrapFewShot alone may be sufficient at lower cost

Basic usage

import dspy
from dspy.evaluate import Evaluate

lm = dspy.LM("openai/gpt-4o-mini")  # or "anthropic/claude-sonnet-4-5-20250929", etc.
dspy.configure(lm=lm)

# 1. Your program
qa = dspy.ChainOfThought("question -> answer")

# 2. Your data (mark which fields are inputs)
trainset = [
    dspy.Example(question="What is the capital of France?", answer="Paris").with_inputs("question"),
    dspy.Example(question="What is 2+2?", answer="4").with_inputs("question"),
    # 50-200+ examples recommended
]

devset = [
    dspy.Example(question="Who wrote Hamlet?", answer="Shakespeare").with_inputs("question"),
    # 20-50 held-out examples for evaluation
]

# 3. Your metric
def metric(example, prediction, trace=None):
    return prediction.answer.strip().lower() == example.answer.strip().lower()

# 4. Optimize with MIPROv2
optimizer = dspy.MIPROv2(metric=metric, auto="medium")
optimized = optimizer.compile(qa, trainset=trainset)

# 5. Evaluate improvement
evaluator = Evaluate(devset=devset, metric=metric, num_threads=4, display_progress=True)
score = evaluator(optimized)
print(f"Optimized score: {score:.1f}%")

# 6. Save
optimized.save("optimized_qa.json")

The auto parameter

The auto parameter controls how much computation MIPROv2 uses. It sets the number of instruction candidates, demo candidates, and search trials automatically:

# Quick experiment
optimizer = dspy.MIPROv2(metric=metric, auto="light")

# Balanced (recommended starting point)
optimizer = dspy.MIPROv2(metric=metric, auto="medium")

# Maximum quality
optimizer = dspy.MIPROv2(metric=metric, auto="heavy")

Start with "medium". Only move to "heavy" if you have a large trainset (200+), a meaningful metric, and the budget for it. Use "light" for quick sanity checks during development.

What MIPROv2 tunes

MIPROv2 optimizes every dspy.Predict (or dspy.ChainOfThought, etc.) module in your program. For each module, it tunes:

Instructions

MIPROv2 generates candidate instructions by analyzing your training data and the task structure. It proposes multiple phrasings, then searches for the combination that maximizes your metric.

Few-shot demonstrations

MIPROv2 bootstraps demonstrations by running your program on training examples and keeping successful traces (where the metric passes). It then selects which demos to include in each module's prompt. The key advantage: it searches over combinations of instructions and demos together — good instructions may need different demos than mediocre instructions.

Key parameters

optimizer = dspy.MIPROv2(
    metric=metric,          # Required: your metric function
    auto="medium",          # "light", "medium", "heavy" — controls search budget
)

optimized = optimizer.compile(
    my_program,             # Required: the program to optimize
    trainset=trainset,      # Required: list of dspy.Example with .with_inputs()
)

Manual configuration (advanced)

If auto does not give you enough control, you can set parameters directly:

optimizer = dspy.MIPROv2(
    metric=metric,
    auto=None,                      # Disable auto presets for manual control
    num_candidates=10,              # Number of instruction candidates per module
    max_bootstrapped_demos=4,       # Max bootstrapped demos per module
    max_labeled_demos=4,            # Max labeled demos per module
)

optimized = optimizer.compile(
    my_program,
    trainset=trainset,
    num_trials=30,                  # Bayesian optimization trials (passed to compile, not constructor)
)

Most users should stick with auto. Manual configuration is useful when you want to fine-tune the search budget or when you have domain-specific constraints (e.g., limiting demo count to keep prompts short).

Computational cost

MIPROv2 makes many LM calls during optimization. The cost depends on:

• auto level — "heavy" makes roughly 5-10x more calls than "light"
• Number of modules — programs with multiple Predict/ChainOfThought modules cost more
• Trainset size — more examples means more bootstrapping runs
• Model cost — using GPT-4o costs more per call than GPT-4o-mini

Cost management tips

1. Develop with "light", ship with "medium" or "heavy" — iterate cheaply, then invest in the final optimization
2. Use a cheaper model for optimization, then evaluate on the target model — if your production model is expensive, optimize with a cheaper one first to validate the approach
3. Start with fewer training examples — 50-100 examples is enough for "light" and "medium"; scale up for "heavy"
4. Set num_threads in your evaluator to parallelize evaluation calls

Typical wall-clock time

Times vary significantly based on model latency, number of modules, and thread count.

Comparison with other optimizers

When to use what

• BootstrapFewShot — first optimization pass, quick iteration, small datasets
• MIPROv2 — best prompt optimization, production use, 50+ examples
• SIMBA — iterative refinement with support for minibatching; good alternative to MIPROv2
• BetterTogether — alternates between prompt optimization and fine-tuning for maximum quality
• GEPA — instruction-only tuning with textual feedback, 20-100 examples
• BootstrapFinetune — fine-tuning model weights (different category entirely)

Stacking optimizers

A common pattern is to run BootstrapFewShot first, then MIPROv2 on the result. Bootstrap finds good demonstrations quickly, then MIPRO refines the instructions around them:

# Step 1: Quick bootstrap
bootstrap = dspy.BootstrapFewShot(metric=metric, max_bootstrapped_demos=4)
bootstrapped = bootstrap.compile(my_program, trainset=trainset)

# Step 2: Refine with MIPROv2
mipro = dspy.MIPROv2(metric=metric, auto="medium")
final = mipro.compile(bootstrapped, trainset=trainset)

This often beats running either optimizer alone.

Save and load

# Save the optimized program
optimized.save("optimized_program.json")

# Load later
from my_module import MyProgram  # your program class
loaded = MyProgram()
loaded.load("optimized_program.json")

# Use it
result = loaded(question="What is DSPy?")

Optimized prompts are model-specific. If you switch LM providers or models, re-run the optimizer. See /ai-switching-models.

Common patterns

Evaluate before and after

Always measure the baseline before optimizing so you know the improvement:

from dspy.evaluate import Evaluate

evaluator = Evaluate(devset=devset, metric=metric, num_threads=4, display_table=5)

# Baseline
baseline_score = evaluator(my_program)

# Optimize
optimizer = dspy.MIPROv2(metric=metric, auto="medium")
optimized = optimizer.compile(my_program, trainset=trainset)

# Compare
optimized_score = evaluator(optimized)
print(f"Baseline:  {baseline_score:.1f}%")
print(f"Optimized: {optimized_score:.1f}%")
print(f"Delta:     {optimized_score - baseline_score:+.1f}%")

Trace-aware metric for better demos

Use the trace parameter to require stricter quality during optimization. This makes MIPROv2 select higher-quality demonstrations:

def metric(example, prediction, trace=None):
    correct = prediction.answer.strip().lower() == example.answer.strip().lower()
    if trace is not None:
        # During optimization: require reasoning too
        has_reasoning = len(getattr(prediction, "reasoning", "")) > 50
        return correct and has_reasoning
    return correct

Multi-module programs

MIPROv2 optimizes all modules in your program. For a multi-step pipeline, each module gets its own optimized instructions and demos:

class RAGPipeline(dspy.Module):
    def __init__(self):
        self.retrieve = dspy.Retrieve(k=3)
        self.generate = dspy.ChainOfThought("context, question -> answer")

    def forward(self, question):
        context = self.retrieve(question).passages
        return self.generate(context=context, question=question)

rag = RAGPipeline()
optimizer = dspy.MIPROv2(metric=metric, auto="medium")
optimized_rag = optimizer.compile(rag, trainset=trainset)

Gotchas

1. Claude sets auto="heavy" by default for production. The auto parameter defaults to "light", and "medium" is the recommended starting point. Heavy is 5-10x more expensive and only justified with 200+ examples and a well-validated metric. Start with "medium" and upgrade only if the score plateaus.
2. Claude passes trainset as a positional argument to compile(). The trainset parameter is keyword-only in MIPROv2: optimizer.compile(program, trainset=trainset), not optimizer.compile(program, trainset). Passing it positionally raises a TypeError.
3. Claude forgets .with_inputs() on training examples. Every dspy.Example in the trainset must call .with_inputs("field1", "field2") to mark which fields are inputs vs labels. Without this, MIPROv2 cannot distinguish inputs from expected outputs and optimization silently underperforms.
4. Claude sets num_candidates without also setting num_trials. When using manual configuration (no auto), both num_candidates and num_trials must be set. Setting only one produces suboptimal search — more candidates without enough trials to evaluate them is wasted compute.
5. Claude uses the deprecated requires_permission_to_run parameter. This parameter is deprecated. Passing True raises an error; False logs a deprecation warning. Remove it entirely from compile() calls.

Additional resources

• dspy.MIPROv2 API docs
• For API details, see reference.md
• For worked examples, see examples.md

Cross-references

Install any skill: npx skills add lebsral/DSPy-Programming-not-prompting-LMs-skills --skill <name>

• Watch MIPROv2 optimization progress -- see /ai-watching-optimization
• Need to prepare training data? Use /dspy-data
• Want to write and run metrics? Use /dspy-evaluate
• Starting with a simpler optimizer first? Use /dspy-bootstrap-few-shot
• Want random search over few-shot demos? Use /dspy-bootstrap-rs
• For the full measure-improve-verify loop, see /ai-improving-accuracy
• For worked examples, see examples.md
• Install /ai-do if you do not have it — it routes any AI problem to the right skill and is the fastest way to work: npx skills add lebsral/DSPy-Programming-not-prompting-LMs-skills --skill ai-do