Cofounder App Deploy

App Deploy

Overview

To deploy web apps, create for each environment:

• A deploy workflow: .github/workflows/deploy-{env}.yml
• A teardown workflow: .github/workflows/teardown-{env}.yml
• An environment-specific Kamal config: config/deploy.{env}.yml
• An environment-specific secrets file: .kamal/secrets.{env}

And common to all environments:

• A Kamal deploy config: config/deploy.yml
• A common secrets file: .kamal/secrets-common
• A single Dockerfile at repo root

See references/workflows.md for deploy and references/teardown.md for teardown workflow syntax. See the examples/ folder for .kamal/ (secrets) and config/ (Kamal config) example files. The .kamal/ and config/ folders live at the repo root so the Kamal deploy job can access them.

How the deploy workflow works

                     Caller workflow (.github/workflows/deploy-{env}.yml)
                          |                              |
                  provisioning job                      deploy job
                          |                              |
                          v                              v
+----------------------------------+   +----------------------------------+
|  External workflow               |   |  Kamal deployment                |
|(locaweb/locaweb-cloud-provision)|   |  (runs in caller's deploy job)   |
|                                  |   |                                  |
|  Provisions infrastructure:      |   |  kamal setup / kamal deploy      |
|    VMs, networks, disks, IPs,    |   |  Builds and pushes Docker image  |
|    firewalls, snapshots, DNS     |   |  Deploys to provisioned VMs      |
|                                  |   |  Reboots scaled accessories      |
|  Outputs: infra_env, IPs,        |   |                                  |
|    infrastructure_changed,       |   |                                  |
|    scaled_accessories            |   |                                  |
+----------------------------------+   +----------------------------------+

What the provision job owns

• Infrastructure provisioning (VMs, networks, disks, firewall, DNS, snapshots)
• Outputs: infra_env, infrastructure_changed, scaled_accessories, web_ip, worker_ips, accessory_ips

Platform Constraints (Read First)

These constraints apply to every application deployed to this platform. Communicate these upfront when starting any deployment work:

• Single Dockerfile at repo root, web app must listen on port 80, otherwise adjust the app_port in the proxy block of /config/deploy.yml
• Health check at GET /up returning HTTP 200 when healthy
• forward_headers: false is non-negotiable -- VMs are directly exposed to the internet with no upstream proxy. The agent must never set this to true.
• Single web VM: No horizontal web scaling. Scale vertically with larger web_plan (see references/scaling.md -- VM Plans for available sizes). Prefer runtimes and frameworks that scale well vertically.
• Workers use the same Docker image with a different command (servers.workers.cmd in deploy.yml).
• volumes for app roles, directories for accessories -- For main app roles (web, workers), use Kamal's volumes keyword for persistent data mounts. For accessories, use directories (which support mode and owner options). Both are auto-created on the host by Kamal and map directly to host paths — making data visible, portable, and backed up. Never use named Docker volumes (myapp_data:/path). For directories syntax (string and hash formats), mode/owner options, and the distinction between volumes and directories, see references/kamal.md — Accessories.
• Host path must be /data/{subdir} -- both the web VM and each accessory VM have a persistent disk mounted at /data/. Always mount subdirectories of /data/, never /data/ root directly (see references/env-vars.md -- Disk Storage Path for web usage, references/postgres-recipe.md -- Volume Mount for the database example). Two reasons: (1) /data/ is an attached disk with scheduled snapshot policies that ensure disaster recovery — data outside /data/ is not backed up; (2) the ext4 filesystem creates lost+found at the mount root, which breaks Docker images that expect a clean directory on first boot (PostgreSQL initdb, Redis appendonly.aof, etc.).
• No Docker build in the caller workflow: The caller's deploy job builds, pushes, and deploys the Docker image via Kamal. The caller workflow must not include any separate Docker build or push steps (no docker/build-push-action, no docker build, no docker push, no login to ghcr.io). Kamal handles the entire build-push-deploy lifecycle using the Dockerfile at the repo root.
• Always enable TLS: Set proxy.ssl: true in every environment config — both nip.io and custom domains get automatic Let's Encrypt certificates via HTTP-01 challenge. Let's Encrypt has never failed to increase rate limits for nip.io when asked, so nip.io subdomains are safe to use with TLS.
• Accessories are flexible -- Each accessory gets its own VM with a data disk. Additional accessories (Redis, WAHA, Meilisearch, etc.) can be added via the Kamal layer when appropriate. For PostgreSQL, see the supabase/postgres recipe — a Postgres image enriched with several extensions, as recommended by the tech-stack skill. Accessories that serve HTTP/HTTPS traffic through kamal-proxy need ports 80 and 443 opened at the firewall — pass "ports": "80,443" in the accessory's JSON entry (port 22/SSH is always open). See references/kamal.md — Accessories for proxy configuration details.
• Accessory reboot on every deploy -- kamal deploy does not update accessories, but the deploy workflow runs kamal accessory reboot all after kamal setup on every deploy. This ensures accessory config changes (image tag, env vars, volumes, ports, cmd) are always applied. Accessories have downtime during reboot (no rolling deploy). See references/kamal.md — Accessories for details.
• Naming rules -- env_name and accessory name values must use only lowercase letters, digits, and underscores ([a-z0-9_]). No hyphens, uppercase, or special characters.

If the application's current design conflicts with any of these, resolve the conflict before proceeding with deployment setup.

Scripts

generate_pg_cmd.py

Outputs the complete PostgreSQL cmd string tuned for a VM plan, if using the supabase/postgres recipe. Use this for the accessories.db.cmd field in config/deploy.<environment>.yml.

mise x -- python3 scripts/generate_pg_cmd.py --plan medium
# Output: postgres -D /etc/postgresql -c shared_buffers=1GB -c effective_cache_size=3GB -c work_mem=10MB -c maintenance_work_mem=256MB -c max_connections=100

Valid plans: micro, small, medium, large, xlarge, 2xlarge, 4xlarge.

Setup Procedure

Follow these steps in order. Each step is idempotent -- safe to re-run across agent sessions.

Step 1: Prepare the application

• Meet all Dockerfile Requirements -- single Dockerfile at root, port 80, health check at /up
• If using workers: ensure the same Docker image supports a separate command for the worker process

Step 2: Ensure a GitHub repository is configured

• Check if a git remote is configured: git remote -v
• If origin is already set, skip this step
• If no remote is configured, set one up using the repo-setup skill before continuing

Step 3: Generate SSH key

Check if an SSH key already exists for this repo:

test -f ~/.ssh/<repo-name> && echo "Key exists" || echo "Key missing"

If the key already exists, reuse it -- do not overwrite.

If the key does not exist, generate a new Ed25519 SSH key:

ssh-keygen -t ed25519 -f ~/.ssh/<repo-name> -N "" -C "<repo-name>-deploy"
chmod 600 ~/.ssh/<repo-name>

This key will be:

• Stored as the SSH_PRIVATE_KEY GitHub secret (the private key)
• Used locally to SSH into preview environment VMs for debugging
• The public key is derived automatically by the deploy workflow at runtime

Step 4: Collect CloudStack credentials

gh secret list

If both CLOUDSTACK_API_KEY and CLOUDSTACK_SECRET_KEY appear → skip to Step 5.

Otherwise:

A. Check for a Locaweb Cloud account

Ask the user: "Você já tem uma conta na Locaweb Cloud?"

• No → tell them to visit locaweb.com.br/locaweb-cloud and click "Contratar" to sign up. Wait for them to confirm they have an account, then continue with B.
• Yes → continue with B.

B. Find the API keys

Guide the user through these steps:

1. Open painel-cloud.locaweb.com.br
2. Navigate to: Contas → (sua conta) → Visualizar usuarios → (seu usuario)
3. Wait up to 60 seconds -- the keys load asynchronously and may not appear immediately. They show up under "Criado" (creation date) on the user page.

If the keys do not appear after waiting:

4. Click the "Gerar novas chaves" icon in the upper right corner of the user page.
5. Wait for the keys to appear.

Wait for the user to confirm they have both keys in hand, then continue with C.

C. Create the GitHub secrets

Give them the GitHub secrets URL:

echo "$(gh repo view --json url -q .url)/settings/secrets/actions"

Ask them to open that URL and click "New repository secret" for each:

Wait for the user to confirm both secrets are saved, then continue to Step 5.

Step 5: Set up app secrets (database, API keys, etc.)

For the full secrets and environment variables reference, see references/env-vars.md.

Discover all app env vars: Read the project's .env file to get the full list of environment variables the application uses. Cross-reference with the application's config loading code (e.g., backend/internal/config/config.go) to confirm which variables are expected. For each variable, decide:

• Skip — local-development-only (DEV_MODE must never be set in production) or already set directly in the Kamal config's env.clear or Dockerfile (example: PORT)
• Derived — composed from other secrets in .kamal/secrets (DATABASE_URL from POSTGRES_PASSWORD)
• Clear — non-sensitive, goes in env.clear in the Kamal config (no GitHub Secret needed)
• Secret — sensitive, needs a GitHub Secret + entry in .kamal/secrets.<env> + entry in env.secret in config/deploy.<env>.yml + entry in the workflow env: block

Keep this classified list — it drives Steps 6 and 7.

Check which secrets already exist via gh secret list.

If the app uses the supabase/postgres recipe, set up database secrets:

• Generate a random password for each environment:

  # Preview password
  mise x -- python -c "import secrets; print(secrets.token_urlsafe(32))"
  
  # Production password (different from preview)
  mise x -- python -c "import secrets; print(secrets.token_urlsafe(32))"
  

• Set POSTGRES_PASSWORD as a GitHub Secret using gh secret set --body with the generated password (the agent does this directly -- never ask the user to set generated passwords)

• DATABASE_URL is not a separate GitHub Secret -- it is derived from POSTGRES_PASSWORD in the .kamal/secrets file (see examples/ for the pattern)

• The default preview environment uses unsuffixed names: POSTGRES_PASSWORD

• Additional environments use suffixed names matching the environment name: e.g., POSTGRES_PASSWORD_PRODUCTION

For any other app secrets identified in the discovery step above, check whether the value already exists in the project's .env file:

• OK to use same value locally and deployed (e.g., SMTP passwords, OAuth credentials, third-party API keys, depending on the case) — the agent sets the GitHub Secret directly from .env (see Step 6).

• Different value or not in .env — the user must set it via the GitHub UI (see Step 6).

• Never accept secret values through the chat

Step 6: Create GitHub secrets

Use gh secret list to check which secrets already exist -- only create missing ones.

Secrets the agent sets directly

# SSH private key for preview (skip if already set)
gh secret set SSH_PRIVATE_KEY < ~/.ssh/<repo-name>

# Postgres password for preview (skip if already set)
gh secret set POSTGRES_PASSWORD --body "<generated password from Step 5>"

For additional environments, use suffixed names:

# SSH private key for production
gh secret set SSH_PRIVATE_KEY_PRODUCTION < ~/.ssh/<repo-name>-production

# Postgres password for production
gh secret set POSTGRES_PASSWORD_PRODUCTION --body "<generated password from Step 5>"

Note: DATABASE_URL does not need a GitHub Secret -- it is derived from POSTGRES_PASSWORD in the .kamal/secrets file.

App-specific secrets

For secrets only the user knows (app API keys, SMTP credentials, etc.), check the project's .env file first.

Reuse from .env: If the secret exists in .env and the same value may apply to the deployed environment, set it directly — the value never appears in chat:

# One-time setup (skip if already installed):
mise x -- pip install -q python-dotenv

# Set a secret from .env (value never appears in chat):
mise x -- python -c "from dotenv import dotenv_values; import sys; print(dotenv_values('.env')[sys.argv[1]], end='')" SECRET_NAME | gh secret set SECRET_NAME

Fall back to GitHub UI: If the secret is not in .env, or the deployed value should differ from the local one, give the user the GitHub secrets URL:

echo "$(gh repo view --json url -q .url)/settings/secrets/actions"

Ask them to click "New repository secret" and tell them the exact Name to enter and where to find the value. Wait for the user to confirm all manually-added secrets are saved before continuing.

Step 7: Create Kamal configuration and secrets files

Read the example files before writing. Each sub-step below names an example file — read it with the Read tool first, then adapt it for the project. Lines marked # do not change must be preserved exactly. Remove sections the project doesn't need (e.g., workers, volumes). Add project-specific values where the comments indicate.

7a: Common config (config/deploy.yml)

Read examples/config/deploy.yml and adapt it:

• Add project-specific env.clear variables (non-sensitive config shared by all environments)
• Add volumes entries if the app stores files on disk (keep paths under /data/)
• Remove the servers.workers block if the project has no workers
• Remove the volumes block if the app has no persistent storage
• Keep all lines marked # do not change exactly as-is — these are platform constraints (forward_headers: false, registry ERB templates, builder config, SSH user)
• Do NOT put env.secret here — arrays are replaced (not merged) by destination files, so any secrets listed here would be silently lost. Put ALL secrets in each config/deploy.<env>.yml

For Postgres accessories, generate the cmd string using generate_pg_cmd.py --plan <chosen_plan>. See the supabase/postgres recipe.

7b: Environment-specific config (config/deploy.{env}.yml)

Read examples/config/deploy.preview.yml (or examples/config/deploy.production.yml for non-preview) and adapt it:

• Set env.secret to list ALL secrets for this environment (common + env-specific) — this is the only place secrets are declared
• Set env.clear for environment-specific non-sensitive config (e.g., APP_ENV: preview)
• Set accessories from docs/INFRASTRUCTURE.md — match image, set host via ERB (<%= ENV['INFRA_<NAME>_IP'] %>), configure port, cmd, env, and directories (always under /data/)
• Set proxy.host — nip.io for preview (<%= ENV['INFRA_WEB_IP'] %>.nip.io), custom domain for production. Always ssl: true
• Remove the servers.workers block if the project has no workers

IMPORTANT — INFRA_*_IP is for Kamal and external URLs only: Use INFRA_*_IP only in host: fields, servers.*.hosts, and proxy.host. Never in env.clear or env.secret. For inter-component communication, use the CloudStack internal DNS hostname (the accessory name, e.g., db, redis).

7c: Common secrets (.kamal/secrets-common)

Read examples/.kamal/secrets-common and adapt it:

• Keep the KAMAL_REGISTRY_PASSWORD line — this is NOT a GitHub Secret; it comes from secrets.GITHUB_TOKEN in the workflow
• Add one line per common secret identified in Step 5 (format: SECRET_NAME=$SECRET_NAME)

7d: Environment-specific secrets (.kamal/secrets.{env})

Read examples/.kamal/secrets.preview (or examples/.kamal/secrets.production for non-preview) and adapt it:

• Add one line per environment-specific secret identified in Step 5
• Preview uses unsuffixed env var names: POSTGRES_PASSWORD=$POSTGRES_PASSWORD
• Non-preview maps to suffixed names: POSTGRES_PASSWORD=$POSTGRES_PASSWORD_PRODUCTION
• Derived secrets (like DATABASE_URL) are composed inline — they don't need their own GitHub Secret

How secrets flow from GitHub to your app

GitHub Secrets  -->  Workflow env: block  -->  Shell environment  -->  .kamal/secrets*  -->  Kamal  -->  Container

1. GitHub Secrets store the actual values (e.g., POSTGRES_PASSWORD, API_KEY_PRODUCTION)
2. The deploy workflow's env: block maps each GitHub Secret to an environment variable on the runner
3. When Kamal runs with -d <destination>, it reads .kamal/secrets-common and .kamal/secrets.<destination> to resolve secret values from the shell environment
4. Secrets listed in env.secret in config/deploy.yml (common) and config/deploy.<env>.yml (env-specific) are injected into the container

The left side of each secrets file line is the Kamal secret name (referenced in env.secret). The right side is the shell environment variable name (which matches the GitHub Secret name). For non-preview environments, the GitHub Secret is suffixed (e.g., POSTGRES_PASSWORD_PRODUCTION), so the right side maps to the suffixed name while the left side stays unsuffixed.

Accessory sync: The workflow's accessories JSON, config/deploy.<env>.yml, and docs/INFRASTRUCTURE.md must always describe the same set of services. Each accessory needs name, plan, disk_size_gb in the JSON; web-facing ones also need "ports": "80,443". Use INFRASTRUCTURE.md as source of truth in both directions — update it whenever accessories change.

WARNING: disk_size_gb is MANDATORY for every accessory. Even if the accessory does not need persistent storage, you must include disk_size_gb with a value in the range 10–4000 GB. Example: {"name":"nginx","plan":"small","disk_size_gb":10,"ports":"80,443"}.

Naming: accessory name must use only lowercase letters, digits, and underscores ([a-z0-9_]). No hyphens, uppercase, or special characters.

Example sync:

# In config/deploy.preview.yml:
accessories:
  db:
    image: supabase/postgres:17.6.1.160
    # ... backend service, no proxy

  n8n:
    image: n8nio/n8n:latest
    host: <%= ENV['INFRA_N8N_IP'] %>
    proxy:
      host: n8n.<%= ENV['INFRA_N8N_IP'] %>.nip.io
      ssl: true
      app_port: 5678
    # ... web-facing, uses kamal-proxy

# In caller workflow (infra job):
with:
  accessories: '[{"name":"db","plan":"medium","disk_size_gb":20},{"name":"n8n","plan":"small","disk_size_gb":10,"ports":"80,443"}]'

Step 8: Create deploy and teardown workflows

Start with a preview environment. Read the example workflows with the Read tool, then adapt them:

1. Deploy workflow: Read the Preview Workflow Example section in references/workflows.md. Copy the full workflow YAML and adapt it:

   • Set the accessories JSON to match the accessories in config/deploy.preview.yml and docs/INFRASTRUCTURE.md — every accessory needs name, plan, and disk_size_gb; web-facing ones also need "ports": "80,443"
   • Add project secrets to the deploy job's env: block — one entry per GitHub Secret that .kamal/secrets files reference (derived secrets like DATABASE_URL don't need an entry)
   • Remove workers_replicas and workers_plan if the project has no workers
   • Do NOT add Docker build/push steps or secrets: inherit — Kamal handles the entire build-push-deploy lifecycle
   • Save as .github/workflows/deploy-preview.yml

2. Teardown workflow: Read references/teardown.md for the teardown pattern. Save as .github/workflows/teardown-preview.yml

Step 9: Add additional environments (when ready)

The preview workflow (triggered on push) gives immediate feedback on every change to the main branch, matching a typical developer flow. Other environments can be added depending on the team's processes.

A common choice is a "production" environment triggered on version tags (v*), where a tag signals that the pointed commit is ready for production. Feel free to create other environments with different triggers and workflow inputs to match your needs.

For each additional environment:

• Generate a separate SSH key: ~/.ssh/<repo-name>-<env_name> (same procedure as Step 3)
• Store it as a suffixed GitHub secret matching the environment name: e.g., SSH_PRIVATE_KEY_PRODUCTION
• If using a database, create a separate secret with the same suffix: e.g., POSTGRES_PASSWORD_PRODUCTION
• If the app has custom secrets scoped to the environment with different values per env, suffix them the same way: e.g., API_KEY_PRODUCTION.
• Secrets common to all environments (e.g., CLOUDSTACK_API_KEY, CLOUDSTACK_SECRET_KEY) don't need to be recreated -- just pass them in every caller workflow
• Write a new environment-specific Kamal config: config/deploy.<env>.yml (same structure as the preview config, with the appropriate hosts, proxy host, and accessories)
• Write a .kamal/secrets.<env> file mapping Kamal secret names to suffixed env var names (e.g., POSTGRES_PASSWORD=$POSTGRES_PASSWORD_PRODUCTION)
• Create a deploy workflow: .github/workflows/deploy-<env>.yml (same two-job pattern, with the environment's trigger, secrets, and inputs)
• Create a teardown workflow: .github/workflows/teardown-<env>.yml
• For production with a custom domain, see DNS Configuration

Deployment Feedback Loop

All changes (Kamal config, workflows, application code) must be committed and pushed before entering this loop — deploy is triggered by git push.

+-----------------------------------------------------+
|                                                      |
|   Push triggers GitHub Actions workflow              |
|        |                                             |
|        v                                             |
|   Monitor workflow run (gh run watch)                |
|        |                                             |
|        v                                             |
|   Workflow succeeds? --No--> Read logs, fix,         |
|        |                     commit/push,            |
|       Yes                    repeat                  |
|        |                                             |
|        v                                             |
|   Health check: curl /up -> HTTP 200?                |
|        |                                             |
|       Yes --> Done (deployment verified)             |
|        |                                             |
|       No                                             |
|        |                                             |
|        v                                             |
|   SSH debug (logs, container state)                  |
|        |                                             |
|        v                                             |
|   Return to tech-stack Local Development             |
|   Feedback Loop to diagnose and fix                  |
|                                                      |
+-----------------------------------------------------+

Workflow monitoring

Give the user a clickable link first: gh run list --limit=1 --json databaseId,url -q '.[0].url'.

Present it prominently:

Your deploy is running! Follow it live here:

<URL from the command above>

Then monitor with gh run watch.

On failure: gh run view <run-id> --log-failed. Common causes: missing secrets, Dockerfile issues (port/health check), permission errors, invalid inputs. Fix, commit, push — preview auto-triggers on push.

Health check verification

curl -s -o /dev/null -w "%{http_code}" https://<web_ip>.nip.io/up (or https://<domain>/up). HTTP 200 = done. If it fails, SSH debug (see references/operations.md), then return to the tech-stack Local Development Feedback Loop to fix.

Modifying Accessories in an Existing Deployment

1. Update docs/INFRASTRUCTURE.md
2. Update config/deploy.<env>.yml — add/remove accessory block (image, host ERB, port, cmd, env, directories; web-facing: add proxy block)
3. Update workflow accessories JSON — disk_size_gb mandatory, web-facing need "ports": "80,443", name must match Kamal config
4. Update env vars if needed — clear → env.clear; secret → env.secret + GitHub Secret + .kamal/secrets.<env> + workflow env: block
5. Commit, push, re-deploy. When removing, also remove code references to the accessory's env var.

Operations (Post-Deployment)

Quick reference for interacting with deployed infrastructure. See references/operations.md for full details.

Dockerfile Requirements

• Single Dockerfile at repository root
• Web app must listen on port 80
• Health check at GET /up → HTTP 200
• If using workers, same image must support a separate command via servers.workers.cmd in config/deploy.<env>.yml
• Database connection via DATABASE_URL env var — fail hard if missing

For Go+React apps, see the tech-stack skill's Dockerfile section. For other stacks, ensure port 80 and the health check endpoint are configured.

Database Migrations

Single web VM → run migrations at container startup (no race conditions). Include migrations in the entrypoint before the web server starts. All migration dependencies must be bundled in the Docker image.

Deployment Outputs and URLs

After deploy, information is available from: workflow outputs (web_ip, worker_ips, accessory_ips, infrastructure_changed, scaled_accessories, infra_env), the Actions step summary, and the provision-output artifact (90-day retention).

App URL: Without domain: https://<web_ip>.nip.io. With domain: https://<domain> (requires DNS A record). Both get TLS via Let's Encrypt HTTP-01.

Choosing the Target Environment for a Domain

When the user asks to configure a custom domain, always ask which environment should receive it — never default silently. Options:

1. Preview — every push goes live immediately. Simple, fast.
2. Production — preview becomes staging; only tagged releases go live. Safer, with a more stable release cycle.

Mention that this can be changed later. Then proceed with DNS Configuration. If production doesn't exist yet, create it via Step 9.

DNS Configuration for Custom Domains

The web VM's public IP is not known until the first deployment completes. To set up a custom domain:

1. Deploy without a domain first (omit proxy.host domain from the destination config). The app will be accessible at https://<web_ip>.nip.io.
2. Note the web_ip from the workflow output or step summary.
3. Create a DNS A record pointing the domain to that IP:

   Type: A
   Name: myapp.example.com (or @ for apex)
   Value: <web_ip from step 2>
   TTL: 300
   

4. Update the destination config (config/deploy.<env>.yml) to set proxy.host to the domain (SSL is already true).
5. Commit, push, and re-deploy. kamal-proxy will provision a Let's Encrypt certificate automatically.

Let's Encrypt HTTP-01 challenge requires the domain to resolve to the server before the certificate can be issued. The IP is stable across re-deployments to the same environment -- it only changes if the environment is torn down and recreated.

Apex domains and www

For apex domains (e.g., example.com), proactively include www. Use the hosts: array in the proxy config and instruct the user to create two DNS A records:

Type: A    Name: @      Value: <web_ip>    TTL: 300
Type: A    Name: www    Value: <web_ip>    TTL: 300

The destination config uses proxy.hosts (array) instead of proxy.host (string):

proxy:
  hosts:
    - example.com
    - www.example.com
  ssl: true

kamal-proxy will provision separate Let's Encrypt certificates for each hostname. Both DNS records must resolve to the server before deployment. Canonical redirect: BASE_URL is always the bare domain. The app must redirect www → bare (HTTP 301) at the application level — kamal-proxy does not do host-to-host redirects. This avoids inconsistent OAuth callbacks, cookies, and links.

Workers

Workers scale horizontally by changing workers_replicas in the caller workflow (see references/workflows.md -- Deploy Input Reference for all inputs). For scaling details, see references/scaling.md -- Scaling Workers. The worker command is set in config/deploy.yml under servers.workers.cmd, not as a workflow input.

• workers_replicas: 0 means no workers (the workflow will not provision worker VMs)
• workers_replicas: 1 or higher provisions that many worker VMs

When workers are enabled:

1. Add servers.workers.cmd and servers.workers.proxy: false to config/deploy.yml:

# config/deploy.yml
servers:
  workers:
    cmd: "celery -A tasks worker --loglevel=info"
    proxy: false

2. Add worker hosts to config/deploy.{env}.yml. The provision job exports INFRA_WORKER_IP_0, INFRA_WORKER_IP_1, etc. -- one for each workers_replicas:

# config/deploy.preview.yml
servers:
  web:
    hosts:
      - <%= ENV['INFRA_WEB_IP'] %>
  workers:
    hosts:
      - <%= ENV['INFRA_WORKER_IP_0'] %>
      - <%= ENV['INFRA_WORKER_IP_1'] %>

3. Set workers_replicas and workers_plan in the caller workflow's infra job:

with:
  workers_replicas: 2
  workers_plan: "small"

Scaling

Scaling happens by updating workflow inputs and/or Kamal config, then redeploying. See references/scaling.md for VM plans, disk sizes, and detailed instructions.

Web (vertical only)

Change web_plan in the workflow and redeploy. No config file changes needed. Causes brief downtime.

Workers

• Vertical: Change workers_plan in the workflow and redeploy. No config file changes needed. Causes brief downtime.
• Horizontal: Change workers_replicas in the workflow. Also update the host list in config/deploy.<env>.yml to match the new replica count — see references/scaling.md -- Scaling Workers for details. Commit, push, and redeploy.

Accessories (database, redis, etc.)

Change the plan in the accessories JSON in the workflow. For database accessories using supabase/postgres, also regenerate the cmd — see references/scaling.md -- Scaling the Database for the full procedure.

Other accessories may also have memory-dependent configuration (e.g., maxmemory for Redis, JVM heap for Elasticsearch). When scaling any accessory, review its cmd, env, or container configuration in config/deploy.<env>.yml and adjust parameters to match the new plan's resources.

Teardown

See references/teardown.md for tearing down environments, inferring zone/env_name from existing workflows, and reading last run outputs.

Disaster Recovery

Every deployed environment has automatic daily snapshots of all data volumes. If an environment is lost (teardown, VM failure, or data corruption), it can be recovered by running the deploy workflow with recover: true.

When the user asks to "recover", "recuperar", "restore", "do DR", or "disaster recovery": the critical action is adding recover: true to the infra job inputs in the deploy workflow. Without this flag, the workflow creates blank disks and the data is lost. Simply changing the zone is not recovery — recovery means restoring from snapshots via the recover: true flag.

Recovery procedure:

1. If the original deployment still exists in the target zone, either tear it down first or change the zone input to recover in a different zone (snapshots are replicated across zones, so recovery works in either zone)
2. Add recover: true to the infra job's with: block in the deploy workflow (e.g., .github/workflows/deploy-preview.yml)
3. Commit, push, and monitor the workflow run
4. After recovery succeeds, verify data is intact (health check, SSH into VMs, check database rows and files)
5. Remove recover: true from the workflow file — if left in place, subsequent runs will fail because the network and volumes already exist

See references/recovery.md for the full procedure, pre-flight requirements, and current limitations.

Development Without Local Environment

Without a local runtime, use the Deployment Feedback Loop as the primary cycle: commit/push → monitor workflow → health check → SSH debug if needed → repeat. Start with preview (push-triggered, no domain, TLS via nip.io). Add production later — especially important without local dev, since preview is the only pre-production check.

References

• references/operations.md -- Post-deployment operations: finding IPs, SSH access, database access, container debugging
• references/workflows.md -- Complete caller workflow examples (deploy + teardown) with all inputs documented
• references/env-vars.md -- Environment variables and secrets configuration
• references/scaling.md -- VM plans, worker scaling, disk sizes
• references/teardown.md -- Teardown process, inferring parameters, reading outputs
• references/recovery.md -- Disaster recovery from snapshots: procedure, pre-flight checks, limitations
• references/postgres-recipe.md -- Recipe for the supabase/postgres image, a Postgres image enriched with extensions as recommended by the tech-stack skill
• references/kamal.md -- Kamal deployment concepts: service/worker/accessory architecture, configuration syntax, proxy, environment variables, secrets, builder, commands