Wcs Helper Network Skill

WCS Helper: Network Tunnel

Access internationally blocked websites from your China-based server.

When You Need This

Scenario A — "git push keeps timing out"

git push github main
# → Connection timeout

→ /万重山-隧道-开启 → try push again → succeeds

Scenario B — "npm install keeps failing for a package from GitHub"

npm install some-github-package
# → network timeout

→ /万重山-隧道-开启 → npm works through tunnel

Scenario C — "HuggingFace model download is stuck"

huggingface-cli download ...
# → timeout or connection reset

→ /万重山-隧道-开启 → download completes through tunnel

Scenario D — "ClawHub skill install is super slow"

clawhub install author/skill
# → extremely slow, often fails

→ /万重山-隧道-开启 → ClawHub installs at full speed

Supported Sites

Prerequisites

Required

• A server outside China (any VPS with SSH access)
  • Recommended: Tencent Cloud Singapore, AWS Singapore, or any international VPS
  • SSH password authentication must be enabled
• SSH password for that server
• Server's public IP address

Recommended

• autossh installed on your China server (auto-restarts tunnel if it drops)
  • Install: apt install autossh (Debian/Ubuntu)
• sshpass installed (for password-based SSH)
  • Install: apt install sshpass

Network Flow

Your China Server (autossh client)
        ↓ SSH tunnel (encrypted)
Singapore/International VPS (as SOCKS5 proxy)
        ↓
GitHub / ClawHub / HuggingFace / Google

Setup

1. Get a Tunnel Server

Any international VPS works. Recommended:

• Tencent Cloud Singapore (CNY ~15/month)
• AWS Singapore Free Tier
• DigitalOcean Singapore
• Vultr Tokyo/Singapore

Requirements:

• SSH password access enabled
• Port 22 (SSH) open to China IPs

2. Install the Skill

npx -y clawhub install guanqi0914/wcs-helper-network-skill

3. Configure with Your Server

Send this command via Feishu private chat:

/万重山-隧道-配置 服务器IP SSH端口 用户名 密码

Example:

/万重山-隧道-配置 43.134.164.43 22 ubuntu myPassword123

4. Start the Tunnel

/万重山-隧道-开启

You should see: ✅ Tunnel connected

5. Test It

curl --socks5 127.0.0.1:1080 https://api.github.com
# Should return: HTTP 200

All Commands

Usage Tips

Before Running git/npm Commands

Send /万重山-隧道-状态 first. If you see "Tunnel: ✅", you're good. If "Tunnel: ❌", send /万重山-隧道-开启 first.

Tunnel Stays On Until You Close It

The tunnel runs in the background. Send /万重山-隧道-关闭 when you don't need international access any more.

Which Ports Are Proxied

Only TCP connections through the SOCKS5 proxy are tunneled:

• GitHub (443) ✅
• ClawHub (443) ✅
• HuggingFace (443) ✅
• Google (443) ✅

UDP traffic (some gaming, VoIP) is NOT proxied.

How It Works

Connection Process

1. autossh connects to your international server via SSH
   sshpass -p 'password' ssh -N -D 127.0.0.1:1080 user@server-ip

2. SSH creates encrypted tunnel

3. autossh monitors the tunnel every 30 seconds

4. If tunnel drops → autossh auto-restarts it

5. Applications use 127.0.0.1:1080 as SOCKS5 proxy

Without the Tunnel (Direct Connection)

China Server → GitHub/ClawHub/HuggingFace
  ↓
Connection timeout / reset / very slow

With the Tunnel

China Server → SSH Tunnel → International VPS → GitHub/ClawHub/HuggingFace
                         ↓
              Stable encrypted connection

Performance

Troubleshooting

"Tunnel: ❌ Connection failed" → Check server IP, SSH port, username, password → Make sure SSH password auth is enabled on your VPS

"Tunnel connects but git push still times out" → Try again — GitHub sometimes rate-limits tunnel IPs temporarily → If persistent, your VPS IP may be on GitHub's blacklist

"autossh process not running after server restart" → Send /万重山-隧道-开启 to restart manually → Or set up systemd service (advanced — see auto-fix.sh)

"SSH connection refused" → Check if port 22 is open on your VPS firewall → Try SSH port 2222 if 22 is blocked

Security Notes

• The tunnel only handles outbound connections from your China server
• Your VPS provider can see the traffic (GitHub, ClawHub, etc.) but NOT your China server's other traffic
• No data is stored on the VPS — only encrypted transit
• Tunnel credentials are stored locally in ~/.wcs_tunnel.conf (chmod 600)

Uninstall

# Stop tunnel
/万重山-隧道-关闭

# Remove skill files
rm -rf ~/.openclaw/workspace/skills/wcs-helper-network-skill
rm -f ~/.wcs_tunnel.conf