majiayu000 创建 VLAN 网络
概述
在 home-ops 环境中创建新的 VLAN 网络，包括路由器配置、K8s 节点 VLAN 接口、Multus 网络定义三个层面。
前置条件
- 路由器 (OpenWrt) 的 SSH 访问权限
- Ansible 环境已配置
- 确定 VLAN ID 和子网规划
网络架构
路由器 (OpenWrt) K8s 节点 Multus CNI
| | |
br-lan.XX <--tagged--> eth1.XX <--macvlan--> Pod
| | |
192.168.XX.1 (无 IP) 192.168.XX.x
步骤
第一步：路由器 VLAN 配置
在路由器 /etc/config/network 中添加配置：
# 新网络接口
config interface 'v<name>'
option device 'br-lan.<vlan_id>'
option proto 'static'
option ipaddr '192.168.<vlan_id>.1'
option netmask '255.255.255.0'
# VLAN 端口配置
config bridge-vlan
option device 'br-lan'
option vlan '<vlan_id>'
list ports 'lan1:t'
list ports 'lan2:t'
list ports 'lan3:t'
同时更新文档 docs/router/vlan.md。
第二步：K8s 节点 VLAN 接口
更新 Ansible playbook ansible/playbooks/setup-vlan.yaml，在 vlan_interfaces 中添加：
vlan_interfaces:
- name: eth1.<vlan_id>
vlan_id: <vlan_id>
parent: eth1
执行 playbook：
ansible-playbook -i ansible/inventory/hosts.ini ansible/playbooks/setup-vlan.yaml
第三步：创建 Multus 网络定义
在 k8s/infra/common/network/multus/networks/ 创建新的网络定义文件。
类型一：需要 IPv6 直连（不使用 sbr）
适用于需要公网 IPv6 的服务（如 tailscale、qbittorrent）：
---
# yaml-language-server: $schema=https://kubernetes-schemas.pages.dev/k8s.cni.cncf.io/networkattachmentdefinition_v1.json
apiVersion: k8s.cni.cncf.io/v1
kind: NetworkAttachmentDefinition
metadata:
name: multus-<name>
spec:
config: |-
{
"cniVersion": "0.3.1",
"name": "multus-<name>",
"plugins": [
{
"type": "macvlan",
"master": "eth1.<vlan_id>",
"mode": "bridge",
"ipam": {
"type": "static",
"routes": [
{"dst": "0.0.0.0/5", "gw": "192.168.<vlan_id>.1"},
{"dst": "8.0.0.0/7", "gw": "192.168.<vlan_id>.1"},
{"dst": "11.0.0.0/8", "gw": "192.168.<vlan_id>.1"},
{"dst": "12.0.0.0/6", "gw": "192.168.<vlan_id>.1"},
{"dst": "16.0.0.0/4", "gw": "192.168.<vlan_id>.1"},
{"dst": "32.0.0.0/3", "gw": "192.168.<vlan_id>.1"},
{"dst": "64.0.0.0/2", "gw": "192.168.<vlan_id>.1"},
{"dst": "128.0.0.0/3", "gw": "192.168.<vlan_id>.1"},
{"dst": "160.0.0.0/5", "gw": "192.168.<vlan_id>.1"},
{"dst": "168.0.0.0/6", "gw": "192.168.<vlan_id>.1"},
{"dst": "172.0.0.0/12", "gw": "192.168.<vlan_id>.1"},
{"dst": "172.32.0.0/11", "gw": "192.168.<vlan_id>.1"},
{"dst": "172.64.0.0/10", "gw": "192.168.<vlan_id>.1"},
{"dst": "172.128.0.0/9", "gw": "192.168.<vlan_id>.1"},
{"dst": "173.0.0.0/8", "gw": "192.168.<vlan_id>.1"},
{"dst": "174.0.0.0/7", "gw": "192.168.<vlan_id>.1"},
{"dst": "176.0.0.0/4", "gw": "192.168.<vlan_id>.1"},
{"dst": "192.0.0.0/9", "gw": "192.168.<vlan_id>.1"},
{"dst": "192.128.0.0/11", "gw": "192.168.<vlan_id>.1"},
{"dst": "192.160.0.0/13", "gw": "192.168.<vlan_id>.1"},
{"dst": "192.169.0.0/16", "gw": "192.168.<vlan_id>.1"},
{"dst": "192.170.0.0/15", "gw": "192.168.<vlan_id>.1"},
{"dst": "192.172.0.0/14", "gw": "192.168.<vlan_id>.1"},
{"dst": "192.176.0.0/12", "gw": "192.168.<vlan_id>.1"},
{"dst": "192.192.0.0/10", "gw": "192.168.<vlan_id>.1"},
{"dst": "193.0.0.0/8", "gw": "192.168.<vlan_id>.1"},
{"dst": "194.0.0.0/7", "gw": "192.168.<vlan_id>.1"},
{"dst": "196.0.0.0/6", "gw": "192.168.<vlan_id>.1"},
{"dst": "200.0.0.0/5", "gw": "192.168.<vlan_id>.1"},
{"dst": "208.0.0.0/4", "gw": "192.168.<vlan_id>.1"},
{"dst": "224.0.0.0/3", "gw": "192.168.<vlan_id>.1"}
]
}
}
]
}
类型二：mDNS 或内网服务（使用 sbr）
适用于智能家居等需要 mDNS 发现的服务：
---
apiVersion: k8s.cni.cncf.io/v1
kind: NetworkAttachmentDefinition
metadata:
name: multus-<name>
spec:
config: |-
{
"cniVersion": "0.3.1",
"name": "multus-<name>",
"plugins": [
{
"type": "macvlan",
"master": "eth1.<vlan_id>",
"mode": "bridge",
"capabilities": { "ips": true, "mac": true },
"ipam": {
"type": "static",
"routes": [
{"dst": "0.0.0.0/0", "gw": "192.168.<vlan_id>.1"}
]
}
},
{
"type": "sbr"
}
]
}
第四步：更新 kustomization.yaml
在 k8s/infra/common/network/multus/networks/kustomization.yaml 中添加新文件：
resources:
- main.yaml
- iot.yaml
- ipv6.yaml
- <new-network>.yaml # 新增
第五步：在服务中使用 Multus 网络
在 HelmRelease 的 Pod annotations 中添加：
defaultPodOptions:
annotations:
k8s.v1.cni.cncf.io/networks: |
[{
"name": "multus-<name>",
"namespace": "network",
"interface": "eth1",
"ips": ["192.168.<vlan_id>.XX/24"],
"mac": "02:XX:XX:XX:XX:XX"
}]
生成 MAC 地址：
printf '02:%02X:%02X:%02X:%02X:%02X\n' $((RANDOM%256)) $((RANDOM%256)) $((RANDOM%256)) $((RANDOM%256)) $((RANDOM%256))
第六步：批量重启 Multus 服务
为使用 Multus 的 Deployment/StatefulSet 添加 label app.ooooo.space/multus: "true"，然后批量重启：
# default namespace
kubectl rollout restart -n default -l app.ooooo.space/multus deployment
kubectl rollout restart -n default -l app.ooooo.space/multus statefulset
# network namespace
kubectl rollout restart -n network -l app.ooooo.space/multus deployment
kubectl rollout restart -n network -l app.ooooo.space/multus statefulset
第七步：更新文档
更新以下文档：
README.md- 服务 IP 表格和 multus 网络定义表格k8s/infra/common/network/multus/networks/README.md- 网络类型说明docs/router/vlan.md- VLAN 定义表格
现有网络类型
| 网络名 | Master 接口 | 子网 | 用途 | 使用 sbr |
|---|---|---|---|---|
| multus-main | eth1 | 192.168.6.0/24 | 保留备用 | 是 |
| multus-iot | eth1.50 | 192.168.50.0/24 | mDNS 智能家居(不关心视频流udp或者可以指定接口发送mdns) | 是 |
| multus-homekit | eth1.50 | 192.168.50.0/24 | mDNS 智能家居(无法指定接口udp) | 否 |
| multus-ipv6 | eth1 | 192.168.6.0/24 | IPv6 直连/UDP | 否 |
注意事项
不创建新 VLAN 的情况: 如果只需要不同的路由策略，可以复用现有 VLAN，只创建新的 Multus 网络定义
IP 规划: 建议 VLAN ID 与子网第三段保持一致（如 VLAN 50 → 192.168.50.0/24）
防火墙: 新 VLAN 需要在路由器配置对应的防火墙区域
验证
- 检查路由器接口:
ssh router "ip addr show br-lan.<vlan_id>" - 检查节点接口:
ansible k8s -m shell -a "ip link show eth1.<vlan_id>" - 检查 Multus 网络:
kubectl get net-attach-def -n network - 测试 Pod 网络: 部署测试 Pod 并验证连通性
参考
- 现有网络定义:
k8s/infra/common/network/multus/networks/ - VLAN 文档:
docs/router/vlan.md - Ansible Playbook:
ansible/playbooks/setup-vlan.yaml