Debug Vps Deployment

Debug VPS Deployment

Deploy to the production VPS (archivist@194.163.189.144) and iteratively debug failures until successful deployment.

Objective

This skill connects to the specific VPS, triggers OtterStack deployments, monitors output for failures, diagnoses root causes, applies fixes, and redeploys until the application is successfully running and healthy.

Orchestration Mode

This skill can be used in two modes:

1. Standalone Mode - Invoked directly by user for manual VPS debugging
2. Orchestrated Mode - Invoked automatically by /deploy-otterstack command during Phase 6: Debug Loop

Orchestrated Mode Operation

When invoked from the /deploy-otterstack command, this skill operates in iterative debug mode:

Workflow:

1. Receives deployment error context from orchestration command
2. Diagnoses failure type using decision tree below
3. Applies appropriate fix (automatic or guided)
4. Returns fix status to orchestration command
5. Orchestration command retries deployment
6. Repeats until successful (max 6 attempts by default)

Context Passed from Orchestration:

• ERROR_MESSAGE - Full error output from failed deployment
• DEPLOYMENT_STAGE - Which stage failed (validation, startup, health_check, lock_conflict, traefik, unknown)
• PROJECT_NAME - Name of the project being deployed
• ATTEMPT_NUMBER - Current debug iteration (1-6)
• DEPLOYMENT_TARGET - Always "vps" when this skill is invoked

Fix Determination: Based on DEPLOYMENT_STAGE, the skill uses the corresponding decision tree section below:

• validation → See "Failure Type 1: compose validation failed"
• startup → See "Failure Type 2: failed to start services"
• health_check → See "Failure Type 3: health check failed"
• lock_conflict → See "Failure Type 4: deployment lock already held"
• traefik → See "Failure Type 5: Traefik routing issues"
• unknown → Analyze full error output to identify type

Fix Application:

Return Values:

After each debugging iteration, provide guidance for retry:

Fix applied: [yes/no/partial]
Fix type: [environment_variable/lock_file/compose_file/dockerfile/code/unknown]
Confidence: [high/medium/low]
Retry recommended: [yes/no]
Notes: [Brief description of what was fixed]

Standalone vs Orchestrated Comparison

Integration Points

The orchestration command integrates this skill as follows:

Before Invocation:

# Parse deployment error
ERROR_MESSAGE=$(cat deployment_output.txt)
DEPLOYMENT_STAGE=$(parse_error_stage "$ERROR_MESSAGE")

# Invoke debug skill with context
# The skill analyzes the error and provides fix guidance

During Debugging:

# For auto-fixable issues (env vars, locks):
if [[ $FIX_TYPE == "environment_variable" ]]; then
  ssh archivist@194.163.189.144 "${OTTERSTACK_PATH} env set ${PROJECT_NAME} ${VAR_NAME} '${VAR_VALUE}'"
fi

if [[ $FIX_TYPE == "lock_file" ]]; then
  ssh archivist@194.163.189.144 "rm ~/.otterstack/locks/${PROJECT_NAME}.lock"
fi

# For manual fixes (compose, Dockerfile, code):
echo "Fix required: ${FIX_DESCRIPTION}"
read -p "Press Enter after fixing manually, or 'abort' to cancel: " response
[[ $response == "abort" ]] && exit 1

After Fix:

# Retry deployment
ssh archivist@194.163.189.144 "~/OtterStack/otterstack deploy ${PROJECT_NAME} -v"

# If successful: proceed to Phase 7: Verification
# If failed: increment attempt counter, continue debug loop

VPS Connection Details

# SSH Connection
SSH_HOST="archivist@194.163.189.144"
SSH_USER="archivist"
OTTERSTACK_PATH="~/OtterStack/otterstack"

# Verify connection
ssh ${SSH_HOST} "echo 'Connection successful'"

Quick Start Deployment

# 1. Verify OtterStack is available
ssh ${SSH_HOST} "${OTTERSTACK_PATH} --help"

# 2. Check project exists
ssh ${SSH_HOST} "${OTTERSTACK_PATH} status <project-name>"

# 3. Deploy with verbose output
ssh ${SSH_HOST} "${OTTERSTACK_PATH} deploy <project-name> -v"

# 4. If it succeeds, verify endpoints. If it fails, proceed to debugging.

Deployment Workflow

Stage 1: Pre-Flight Checks

Before deploying, verify the environment is ready:

# Check SSH access
ssh ${SSH_HOST} "echo 'SSH OK'"

# Check OtterStack installation
ssh ${SSH_HOST} "${OTTERSTACK_PATH} --version" || \
  ssh ${SSH_HOST} "ls -l ~/OtterStack/otterstack"

# List existing projects
ssh ${SSH_HOST} "${OTTERSTACK_PATH} project list"

# Check current deployment status
ssh ${SSH_HOST} "${OTTERSTACK_PATH} status <project-name>"

Stage 2: Trigger Deployment

Deploy with verbose output to see all stages:

ssh ${SSH_HOST} "${OTTERSTACK_PATH} deploy <project-name> -v"

Stage 3: Monitor Deployment Stages

Watch the output for these sequential stages:

1. "Fetching latest changes..." → Git operations (only for remote repos)
2. "Validating compose file..." → Syntax and env var validation
3. "Pulling images..." → Docker image downloads
4. "Starting services..." → Container creation and startup
5. "Waiting for containers to be healthy..." → Health check polling
6. "Applying Traefik priority labels..." → Traffic routing setup (if Traefik enabled)
7. "Deployment successful!" → All done

If any stage fails, proceed to the corresponding debugging section below.

Failure Diagnosis Decision Tree

Failure Type 1: "compose validation failed"

Symptoms:

• Error during "Validating compose file..." stage
• Message like: variable MYVAR is not set
• Or: services.web.image is undefined

Diagnosis Commands:

# View full validation output
ssh ${SSH_HOST} "cd ~/.otterstack/repos/<project> && docker compose config"

# Check which env vars are set
ssh ${SSH_HOST} "${OTTERSTACK_PATH} env list <project-name>"

# View the env file being used
ssh ${SSH_HOST} "cat ~/.otterstack/envfiles/<project-name>.env"

Common Causes:

1. Missing environment variables → Variable used in compose file but not set
2. Invalid YAML syntax → Parse errors in compose file
3. Undefined service references → Service/network/volume doesn't exist

Fix:

# Add missing environment variables
ssh ${SSH_HOST} "${OTTERSTACK_PATH} env set <project> VAR value"

# For invalid syntax: fix compose file locally, commit, push, redeploy

# Verify fix
ssh ${SSH_HOST} "${OTTERSTACK_PATH} deploy <project-name> -v"

Failure Type 2: "failed to start services"

Symptoms:

• Error during "Starting services..." stage
• Containers exit immediately
• Message like: container exited with code 1

Diagnosis Commands:

# OtterStack automatically shows last 50 lines on failure
# For more context:
ssh ${SSH_HOST} "docker compose -p <project>-<sha> logs --tail=100"

# Check container status
ssh ${SSH_HOST} "docker ps -a --filter name=<project>"

# Inspect specific container
ssh ${SSH_HOST} "docker logs <container-name> --tail=50"

Common Causes & Fixes:

Missing Files

Error: ENOENT: no such file or directory

Diagnosis:

# Check if files exist in container
ssh ${SSH_HOST} "docker exec <container> ls -la /app"

Fix: Update Dockerfile COPY paths, commit, push, redeploy.

Permission Denied

Error: EACCES: permission denied

Diagnosis:

# Check file/directory ownership
ssh ${SSH_HOST} "docker exec <container> ls -la /app/data"

Fix: Update Dockerfile to set correct ownership:

RUN mkdir -p /app/data && chown -R app:app /app/data
USER app

Native Module Errors (Node.js)

Error: Error: Could not locate the bindings file

Fix: Add rebuild step to Dockerfile:

RUN npm rebuild better-sqlite3  # Or other native module

Migration Failures

Error: no such table: sessions or relation does not exist

Diagnosis:

# Check if migrations ran
ssh ${SSH_HOST} "docker logs <container> | grep -A5 'migration'"

Fix: Ensure migration files are copied to correct path in Dockerfile.

Database Connection Failures

Error: connection refused or ECONNREFUSED

Diagnosis:

# Check if database service is running
ssh ${SSH_HOST} "docker ps | grep database"

# Test connection from container
ssh ${SSH_HOST} "docker exec <container> curl database:5432"

Fix: Verify database service exists in compose file and is healthy.

Failure Type 3: "health check failed"

Symptoms:

• Error during "Waiting for containers to be healthy..." stage
• Timeout after 5 minutes
• Message like: container myapp-web-1 is unhealthy

Diagnosis Commands:

# Check container status
ssh ${SSH_HOST} "docker ps --format 'table {{.Names}}\t{{.Status}}'"

# View recent logs
ssh ${SSH_HOST} "docker logs <container> --tail=50"

# Test health check manually
ssh ${SSH_HOST} "docker exec <container> curl -f http://127.0.0.1:8080/health"

# Check what health check is defined
ssh ${SSH_HOST} "docker inspect <container> | grep -A10 Healthcheck"

Common Causes & Fixes:

Wrong Endpoint

Error: Health check returns 404

Diagnosis: Check application logs for available routes

Fix: Update health check in compose file to correct endpoint:

healthcheck:
  test: ["CMD", "curl", "-f", "http://127.0.0.1:8080/healthz"]  # Correct path

IPv6/IPv4 Mismatch

Error: connection refused when testing health check

Diagnosis:

# Check if localhost resolves to IPv6
ssh ${SSH_HOST} "docker exec <container> ping -c1 localhost"

# Test with explicit IPv4
ssh ${SSH_HOST} "docker exec <container> curl http://127.0.0.1:8080/health"

Fix: Use 127.0.0.1 instead of localhost in health check:

healthcheck:
  test: ["CMD", "curl", "-f", "http://127.0.0.1:8080/health"]

Slow Startup

Error: Timeout before app is actually ready

Diagnosis: Check how long app takes to start from logs

Fix: Increase start_period in health check:

healthcheck:
  test: ["CMD", "curl", "-f", "http://127.0.0.1:8080/health"]
  interval: 10s
  timeout: 3s
  retries: 3
  start_period: 60s  # Increased from 30s

Port Mismatch

Error: Connection refused on health check port

Diagnosis:

# Check what ports app is listening on
ssh ${SSH_HOST} "docker exec <container> netstat -tlnp"

Fix: Update health check to use correct port.

Failure Type 4: "deployment lock already held"

Symptoms:

• Error before deployment starts
• Message: Error: deployment in progress

Diagnosis:

# Check lock file
ssh ${SSH_HOST} "cat ~/.otterstack/locks/<project>.lock"

# Extract PID and check if process is running
LOCK_PID=$(ssh ${SSH_HOST} "grep PID ~/.otterstack/locks/<project>.lock | cut -d: -f2")
ssh ${SSH_HOST} "ps -p ${LOCK_PID}"

Fix:

# If process is dead, remove stale lock
ssh ${SSH_HOST} "rm ~/.otterstack/locks/<project>.lock"

# If process is alive, wait for it to finish
# Or check logs: tail -f ~/.otterstack/logs/<project>.log

Failure Type 5: Traefik routing issues

Symptoms:

• Deployment succeeds but endpoints return 404/502
• Traefik dashboard doesn't show new routes

Diagnosis:

# Check if containers are running
ssh ${SSH_HOST} "docker ps | grep <project>"

# Check Traefik routes
ssh ${SSH_HOST} "curl -s http://localhost:8080/api/http/routers | grep <project>"

# Check container labels
ssh ${SSH_HOST} "docker inspect <container> | grep -A20 Labels"

# Check container network
ssh ${SSH_HOST} "docker network inspect <network> | grep <container>"

Common Causes:

1. Container not on Traefik network → Add network to compose file
2. No Traefik labels → Ensure labels are defined
3. Priority not applied → Check OtterStack applied priority labels

Fix: Verify compose file has correct Traefik configuration.

Iterative Fix-Deploy Loop

When deployment fails, follow this loop:

Step 1: Capture Error

• Note exact error message from deployment output
• Identify which stage failed (validation, startup, health check)
• Save container logs if available

Step 2: Diagnose Root Cause

• Use decision tree above to identify cause
• Run diagnostic commands to confirm hypothesis
• Compare with known issues in OtterStack TROUBLESHOOTING.md

Step 3: Apply Fix

If environment variable issue:

ssh ${SSH_HOST} "${OTTERSTACK_PATH} env set <project> VAR value"

If compose file issue:

1. Fix locally in docker-compose.yml
2. Commit and push to git
3. Redeploy (OtterStack will pull latest)

If application code issue:

1. Fix code locally
2. Commit and push
3. Redeploy (image will be rebuilt)

If Dockerfile issue:

1. Fix Dockerfile locally
2. Commit and push
3. Redeploy (image will be rebuilt)

Step 4: Redeploy and Verify

ssh ${SSH_HOST} "${OTTERSTACK_PATH} deploy <project-name> -v"

Step 5: Repeat Until Successful

Continue the loop until deployment succeeds and all verifications pass.

Real Example: Aperture Deployment

This is the actual sequence of iterations from the Aperture deployment:

Iteration 1: Environment Variables Missing

Error:

WARN The "DATABASE_URL" variable is not set. Defaulting to a blank string

Fix:

ssh archivist@194.163.189.144 "~/OtterStack/otterstack env set aperture DATABASE_URL 'postgres://...'"

Outcome: Variables loaded, but next issue appeared.

Iteration 2: Container Name Conflicts

Error:

The container name "/aperture-web" is already in use

Fix: Removed container_name: directives from docker-compose.yml locally, committed, pushed.

Outcome: Containers started, but new issue appeared.

Iteration 3: Native Module Bindings

Error:

Error: Could not locate the bindings file. Tried: better_sqlite3.node

Fix: Added to Dockerfile:

RUN npm rebuild better-sqlite3

Committed, pushed, redeployed.

Outcome: Bindings loaded, but new issue appeared.

Iteration 4: Database Path Permissions

Error:

SqliteError: unable to open database file, code: 'SQLITE_CANTOPEN'

Fix: Added DATABASE_PATH environment variable pointing to /app/data/db/aperture.db and ensured directory ownership in Dockerfile.

Outcome: Database opened, but new issue appeared.

Iteration 5: Missing Migrations

Error:

[DB] No migrations directory found, skipping migrations
Failed to start server: SqliteError: no such table: sessions

Fix: Updated Dockerfile to copy migrations to correct location:

COPY src/migrations ./dist/migrations  # Was copying to ./src/migrations

Outcome: Migrations ran successfully, but new issue appeared.

Iteration 6: Web Health Check Failure

Error:

container aperture-web-1 is unhealthy

Diagnosis: Health check used localhost which resolved to ::1 (IPv6), but nginx only listened on 0.0.0.0:80 (IPv4).

Fix: Changed health check to use 127.0.0.1 instead of localhost in docker-compose.yml.

Outcome: ✅ SUCCESS! Deployment completed.

Final Status

# Check deployment
ssh archivist@194.163.189.144 "~/OtterStack/otterstack status aperture"
# Output: Status: active, SHA: e2d6223

# Verify endpoints
curl -I https://aperture-api.archivist.lol
# Output: HTTP/1.1 200 OK

curl -I https://aperture.archivist.lol
# Output: HTTP/1.1 200 OK

Total iterations: 6 Time: ~2 hours (including investigation time) Key lesson: Each fix revealed the next issue - systematic debugging is essential.

Success Verification

Once deployment completes without errors, verify success:

1. Check Deployment Status

ssh ${SSH_HOST} "${OTTERSTACK_PATH} status <project-name}"

Expected output:

Status: active
Commit: abc1234
Started: 2025-01-11 10:30:00

2. Check Container Health

ssh ${SSH_HOST} "docker ps --format 'table {{.Names}}\t{{.Status}}' | grep <project>"

Expected output:

project-abc1234-web-1      Up 2 minutes (healthy)
project-abc1234-worker-1   Up 2 minutes (healthy)

All containers should show (healthy) status.

3. Test Endpoints

# Test API endpoint
ssh ${SSH_HOST} "curl -I https://api.example.com/health"

# Or test from local machine
curl -I https://api.example.com/health

Expected output:

HTTP/1.1 200 OK

4. Check Application Logs

ssh ${SSH_HOST} "docker logs <container-name> --tail=20"

Expected: No errors, should see normal application startup and health check logs.

5. Verify Traefik Routing (if enabled)

ssh ${SSH_HOST} "curl -s http://localhost:8080/api/http/routers | grep <project>"

Expected: Router entries with correct domains and priorities.

Troubleshooting Tips

Container Keeps Restarting

# Check restart count
ssh ${SSH_HOST} "docker ps -a | grep <project>"

# View logs across restarts
ssh ${SSH_HOST} "docker logs <container> --tail=100"

Common causes: Crash on startup, missing dependencies, wrong command

Old Containers Not Stopping

# List all project containers
ssh ${SSH_HOST} "docker ps -a | grep <project>"

# Manually stop old deployment
ssh ${SSH_HOST} "docker compose -p <old-project-name> down"

Deployment Succeeds but App Doesn't Work

# Check container can reach internal services
ssh ${SSH_HOST} "docker exec <container> curl http://database:5432"

# Check environment variables in container
ssh ${SSH_HOST} "docker exec <container> env | grep DATABASE"

# Check file permissions
ssh ${SSH_HOST} "docker exec <container> ls -la /app"

Git Pull Fails (Remote Repos)

# Check SSH keys
ssh ${SSH_HOST} "ssh -T git@github.com"

# Check network
ssh ${SSH_HOST} "ping -c3 github.com"

# Manually pull to see error
ssh ${SSH_HOST} "cd ~/.otterstack/repos/<project> && git pull"

Emergency Rollback

If a deployment breaks production:

# Option 1: Deploy previous commit
ssh ${SSH_HOST} "${OTTERSTACK_PATH} deploy <project> --ref <previous-commit-sha>"

# Option 2: Manually switch back to old containers
# (Only if new containers still starting)
ssh ${SSH_HOST} "docker compose -p <old-project-name> up -d"
ssh ${SSH_HOST} "docker compose -p <new-project-name> down"

Success Criteria

Deployment is successful when:

✅ Deployment command completes without errors

• "Deployment successful!" message appears
• No timeout or failure messages

✅ All containers are healthy

• docker ps shows all containers with (healthy) status
• No containers in restarting loop

✅ Endpoints return expected responses

• HTTP 200 from health endpoints
• Application responds correctly to test requests

✅ No errors in logs

• Recent logs show normal operation
• No crash traces or error messages

✅ Traffic is being routed correctly (if Traefik enabled)

• Public domain resolves to application
• Traefik shows active router with correct priority

Related Commands

• /deploy-otterstack - Full orchestration command that uses this skill in Phase 6 for VPS deployments