Domain

/domain — Brainstorm + check available .com domains

Multi-tool workflow to find a great, affordable, available .com for a new project. Built on Laura Roeder's rule: work backwards from what's actually available — don't fall in love with a name first (source).

Defaults to .com only. Only deviate (.dev, .co, .io, .ai) if the project is dev-tooling-only or the user explicitly asks.

Step 0 — Environment checks

Verify these before proceeding (surface install commands if missing, don't try to install silently):

Domainr + Namecheap are optional — the workflow degrades gracefully without them (skips the corresponding cross-check steps).

Step 1 — Set the budget

Ask: what would you pay for a great .com on this project? Anchor defaults:

Filter all candidates to under-budget BEFORE falling in love.

Step 2 — Seed words for "branded" combos

Ask what the product does + the feeling/category. Brainstorm 20–40 candidate domains using these preferences (in order):

1. Two real words mashed together ← preferred (Helpscout, RightMessage, ConvertKit, Paperbell, Mailchimp). Easy to spell, remember, google.
2. Prefix/suffix the bare word — grab the .com when the bare word is taken or over budget. "I love word X, X.com is gone, what qualifier unlocks the .com?"
   • Modern prefixes (B2B SaaS feel): try (TryGamma, TryRoam), use (UseMotion, UseChalk), with (WithCove, WithFrame), join (JoinHomebase, JoinHonor)
   • Classic prefixes (still work): get (GetMagic, GetResponse), go (GoCardless, GoFundMe), hey (HeyMarvin, HeyHenry), the (TheBrowserCompany, TheDyrt — editorial vibe)
   • Dated — avoid unless intentional: my (MyFitnessPal), meet (MeetEdgar)
   • Suffixes: +ly (Calendly, Grammarly — battle-tested but reads "2015 startup"), +ify (Spotify, Shopify — rare, hard to land authentically), +labs (AI/research positioning), +hq / +app (mostly informal)
   • Watch: trademark collision (UseSlack.com is a brand violation even if registrable); popular bare words often have try/use/get/join variants pre-grabbed by the same owner; longer URLs cost spelling-on-phone bandwidth
   • Full grid: if the user loves a bare word, generate all try/use/with/join/get/go/hey/the + word and word + ly/ify/labs/hq/app in one shot — ~15 variants
3. One real word, slightly modified (Trello, Pinterest, Lyft) — fine.
4. Made-up-sounds (Sunsama, Besedky) — only as fallback. Notoriously hard to remember.
5. Common single-word objects (Clubhouse, Spoke, Blush, Finder) — AVOID. Ungoogleable, .com always taken, collides with other products.

Surface a numbered candidate list before checking — don't burn cycles checking obvious losers.

Step 3 — Primary availability check (Vercel CLI)

Use vercel domains check for availability and vercel domains price for registrar quotes. Loop candidates:

for domain in candidate1.com candidate2.com candidate3.com; do
  echo -n "$domain: "
  vercel domains check "$domain" 2>&1 | grep -E "available|not available|Error" || echo "checking..."
done

For pricing on the candidates that came back available:

vercel domains price candidate1.com candidate2.com candidate3.com

For a single deeper check on a taken domain (registrar status, expiration, nameservers if the domain is already Vercel-managed):

vercel domains inspect candidate.com

TLD reliability: Vercel CLI is rock-solid for .com and most gTLDs, but returns errors for .ai, .dev, .io, .app (Vercel doesn't sell those registrar-side). Skip Step 3 for non-.com candidates and go straight to Step 4.

Step 4 — Cross-check with whois

Ground truth for registration status. Query the right server per TLD — pinning -h whois.verisign-grs.com to a non-.com produces silent false negatives.

.com / .net — Verisign:

for domain in candidate1.com candidate2.com; do
  status=$(whois -h whois.verisign-grs.com "$domain" 2>&1 | grep -iE "no match|registrar:" | head -1)
  echo "$domain → $status"
done

.ai — whois.nic.ai directly (default whois on macOS doesn't always chase the IANA referral):

for domain in candidate.ai; do
  result=$(whois -h whois.nic.ai "$domain" 2>&1)
  if echo "$result" | grep -qi "no object found\|no match\|not registered\|no entries found"; then
    echo "$domain → AVAILABLE"
  elif echo "$result" | grep -qi "registrar:"; then
    echo "$domain → TAKEN"
  fi
done

.dev / .app / .io / other — use rdap.org as universal fallback:

for domain in candidate.dev candidate.app; do
  code=$(curl -sL -o /dev/null -w "%{http_code}" "https://rdap.org/domain/$domain")
  case "$code" in
    404) echo "$domain → AVAILABLE" ;;
    200) echo "$domain → TAKEN" ;;
    429) echo "$domain → rate-limited, sleep + retry" ;;
    *)   echo "$domain → HTTP $code (unclear)" ;;
  esac
  sleep 1  # rdap.org rate-limits aggressively
done

Reading the results:

• No match / no object found / RDAP 404 = unregistered, available
• Registrar: <name> / RDAP 200 = taken, check the aftermarket

Step 5 — Domainr cross-check (aftermarket signal)

Domainr aggregates registrar + marketplace status across many TLDs. Skip if DOMAINR_API_KEY unset — otherwise:

for domain in candidate1.com candidate2.com; do
  curl -s "https://domainr.p.rapidapi.com/v2/status?domain=$domain" \
    -H "X-RapidAPI-Key: $DOMAINR_API_KEY" \
    -H "X-RapidAPI-Host: domainr.p.rapidapi.com" \
    | jq -r --arg d "$domain" '.status[] | "\($d): \(.status) — \(.summary)"'
done

Status codes:

• undelegated inactive → unregistered, free
• active → registered, in use
• marketed, parked, priced → for sale on aftermarket (Domainr surfaces price hint when available)
• premium → registry premium (often $500+/yr)

marketed or priced = high-signal flag to dig into HugeDomains/Afternic in Step 7.

Step 6 — Namecheap price check

Fallback registrar — sometimes cheaper than Vercel on year-1 promo pricing. Skip if NAMECHEAP_API_* unset — otherwise:

DOMAINS="candidate1.com,candidate2.com,candidate3.com"
curl -s "https://api.namecheap.com/xml.response?ApiUser=$NAMECHEAP_API_USER&ApiKey=$NAMECHEAP_API_KEY&UserName=$NAMECHEAP_API_USER&Command=namecheap.domains.check&ClientIp=$NAMECHEAP_CLIENT_IP&DomainList=$DOMAINS" \
  | xmllint --xpath '//*[local-name()="DomainCheckResult"]' - 2>/dev/null \
  | grep -oE 'Domain="[^"]+" Available="[^"]+"( IsPremiumName="[^"]+")?( PremiumRegistrationPrice="[^"]+")?'

Available="true" = registrable at Namecheap registrar prices (typically $9–$15/yr for .com). IsPremiumName="true" = registry premium tier (skip unless under budget).

Reconcile Vercel + Domainr + Namecheap + whois. If they disagree (rare, happens during registrar transfers), trust whois for registration truth and the cheaper of Vercel/Namecheap for actual purchase.

Step 7 — Aftermarket sweep for taken candidates

Don't try to scrape marketplaces. All verified failing:

• curl (even with realistic User-Agent) → HugeDomains 403, GoDaddy Akamai access-denied
• WebFetch → Cloudflare 403 across the board
• dev-browser skill with real Chromium → Cloudflare fingerprints Playwright automation flags, serves challenge pages. Bypassing needs playwright-extra + stealth plugin (flaky) or pre-warmed browser profile with human-solved captcha (not worth it for a domain hunt)
• domainr.com public web → IP-rate-limited
• rdap.org → registration status only, no aftermarket pricing

What works: compose marketplace URLs and have the user click. ~30 seconds per domain, 100% reliable. For every "taken" candidate the user is still curious about, output:

namedyoulove.com — TAKEN (Registrar: GoDaddy)
Aftermarket pricing — click to verify:
  HugeDomains: https://www.hugedomains.com/domain-profile.cfm?d=namedyoulove&e=com
  Afternic:    https://www.afternic.com/domain/namedyoulove.com
  Sedo:        https://sedo.com/search/searchresult.php4?keyword=namedyoulove.com
  Dan/GoDaddy: https://dan.com/buy-domain/namedyoulove.com

Laura's HugeDomains note: she got Paperbell.com from HugeDomains for $1,795 and recommends them as the best aftermarket starting point — "a ton of great .com's available for less than $1k." Always check HugeDomains first on taken candidates.

Step 8 — Bucket the results

Group into:

• Available now (~$10–$30/yr) — primary candidates
• Aftermarket-listed under budget — secondary (capture asking price + marketplace)
• Aftermarket over budget OR no listing found — drop, unless the user loves it enough for direct owner outreach

Step 9 — Negotiate on aftermarket listings

When a candidate is listed:

• Sticker price is rarely the floor. Try a lowball 30–50% below ask.
• HugeDomains + Afternic have "Make an offer" — use it.
• If the domain shows "parked" (lander only, no real site) and the owner isn't on a marketplace, look up whois contact + offer directly.

Step 10 — NOW do the name research (not before!)

For top 3–5 candidates that survived availability + budget:

• Google the bare word — what else exists with it?
• Trademark check (USPTO) — see Step 10a
• Social handle availability — see Step 10b
• Say it out loud — spellable for someone on a phone call?

Step 10a — USPTO trademark search via agent-browser

What does NOT work (verified — don't waste cycles):

• curl against tmsearch.uspto.gov → AWS WAF challenge, JS shell only, no data
• WebFetch against tmsearch.uspto.gov → same WAF, empty SPA shell
• curl/WebFetch against Justia, Trademarkia, TrademarkElite → all 403
• USPTO Open Data Portal API → requires USPTO.gov account linked to ID.me (hard signup)
• Marker API / RapidAPI USPTO endpoints → require key signup

What works: drive the real USPTO Trademark Search SPA with agent-browser. Angular + Material components, but the input + Enter-to-submit pattern is reliable.

# Open + search
agent-browser open "https://tmsearch.uspto.gov/" --session tm
sleep 4
agent-browser fill "#searchbar" "<phrase to check>" --session tm
agent-browser press Enter --session tm
sleep 6

# Capture results
agent-browser screenshot /tmp/tm-<slug>.png --session tm
agent-browser eval "(()=>{const m=document.body.innerText.match(/([0-9,]+)\s+results?\s+for/i); return m?m[0]:'no count';})()" --session tm

Reading the result:

• Total result count = USPTO's fuzzy/word search across the whole DB. Common words return tens of thousands — not a clearance signal on its own.
• What matters: scan first 5–10 visible mark names in the screenshot (or snapshot -i | grep wordmark). USPTO orders by relevance — an exact-phrase match appears at the top. If top hits are fragmentary ("MY KNOW", "KNOW MY" as separate marks), you almost certainly don't have a blocking exact-phrase registration.
• Filter to "Live" only in the sidebar to focus on actually-blocking marks (Dead/Cancelled don't matter for new applications).
• Class matters. A "GIFT ASSESSMENT" mark registered for gift-assessment services (USPTO classes 41 education, 42 SaaS, or 45 personal services) would block you. Same words in gift-baskets-class-35 might be okay.

This is screening, not legal advice — for any name you're seriously committing to, run past an IP lawyer or full clearance service (Cometrics/Corsearch).

agent-browser close --session tm

Step 10b — Social handle availability

# X / Twitter (404 = available)
for handle in candidate1 candidate2; do
  code=$(curl -sL -o /dev/null -w "%{http_code}" -A "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/537.36" "https://x.com/$handle" --max-time 10)
  echo "  @$handle → x.com $code"
done

# LinkedIn company page (404 = available)
for handle in candidate1 candidate2; do
  code=$(curl -sL -o /dev/null -w "%{http_code}" -A "Mozilla/5.0" "https://www.linkedin.com/company/$handle" --max-time 10)
  echo "  $handle → linkedin $code"
done

Instagram is unreliable from script — IG returns 200 for any URL (SPA shell loads even for non-existent handles, "isn't available" message renders client-side). Give the user a click-through:

Instagram: https://instagram.com/<handle>

30 seconds of manual click beats fighting the IG SPA detection.

Step 11 — Buy it

When the user picks a winner that's directly available, buy at whichever registrar quoted the lowest price in Step 3 vs Step 6:

# Vercel
vercel domains buy <domain>.com

# Namecheap (via API — uses ~/.zshenv credentials)
curl -s "https://api.namecheap.com/xml.response?ApiUser=$NAMECHEAP_API_USER&ApiKey=$NAMECHEAP_API_KEY&UserName=$NAMECHEAP_API_USER&Command=namecheap.domains.create&ClientIp=$NAMECHEAP_CLIENT_IP&DomainName=<domain>.com&Years=1&..."

Vercel is one-command and keeps DNS in the same dashboard as deploys — preferred unless Namecheap is meaningfully cheaper (often is on year-1 promo). Auto-renew on by default for both.

Confirm with the user before running — this charges real money.

For aftermarket purchases: buy through the marketplace directly (HugeDomains/Afternic/Sedo all handle escrow). Then transfer or point nameservers to Vercel after transfer completes.

Composes with

• toolify — wire up the Domainr and Namecheap API credentials if the user hasn't yet
• business-brainstorm — pressure-test the underlying business idea BEFORE the domain hunt (a bad idea with a great .com is still a bad idea)
• decide — for the "which of the top 3 candidates" call if it's not obvious
• skillify — if the domain hunt surfaces a repeat workflow worth capturing (e.g., specific niche naming patterns), scaffold as its own sub-skill

Notes on quality

• Brainstorming-first, action-last. Never run vercel domains buy until the user explicitly says "buy it." Real money. Availability + price checks (Step 3) use vercel domains check + vercel domains price which are safe.
• Budget filter is non-negotiable. If the user pushes back ("but I love it"), remind them that's exactly the trap Laura warned about.
• Multi-tool ensemble is intentional. No single tool covers all the bases cleanly — Vercel is fast but limited to gTLDs; whois is definitive but per-TLD-specific; Domainr aggregates; Namecheap prices year-1 promo; RDAP fills the modern-TLD gap; agent-browser drives USPTO. Skipping any leaves a blind spot.
• Don't fight marketplace scraping. HugeDomains/Afternic/Sedo/Dan all Cloudflare-block automation. Output click-through URLs. 30 seconds of manual click is more reliable than a headless-browser workaround.
• USPTO screening ≠ legal clearance. Use this for gut-check filtering; run serious names past an IP lawyer.

Reference

Laura Roeder's original post: https://lauraroeder.com/how-i-nabbed-the-com-for-my-bootstrapped-startup-without-spending-a-million-bucks-6dc35c4606e9