majiayu000 Automatically run the three-phase device workflow (Compile, Upload, Monitor), diagnose any failures, and apply fixes.
- Compile: Run compilation using
uv run ci/debug_attached.py(compile phase only) - Upload: Execute upload with automatic port conflict resolution
- Monitor: Attach to serial monitor, capture output for 10 seconds, detect failure keywords
- Diagnose: Identify upload failures, compilation errors, runtime crashes, ESP-IDF errors
- Fix: Automatically fix code, configuration, or suggest manual hardware fixes
- Verify: Re-test after applying fixes (up to 3 attempts)
Using debug_attached.py
uv run ci/debug_attached.py esp32dev --timeout 10 --fail-on PANIC --fail-on "guru meditation"
What Gets Fixed Automatically
- Upload failures: Port detection, permission issues, bootloader problems
- Compilation errors: Missing includes, type errors, dependency issues
- Configuration issues: Wrong board settings, incorrect platformio.ini parameters
- Runtime crashes: Watchdog resets, brownout detection, stack overflows
What Requires Manual Intervention
- Hardware issues: Physical wiring problems, power supply issues
- Driver issues: Missing USB drivers, permission setup
- Severe code issues: Major architecture problems requiring human decisions