Forced Reading Protocol

Forced Complete Reading Protocol

Overview

Prevent skimming and superficial reading through mandatory line-by-line comprehension with quantitative verification.

Core principle: Thoroughness cannot be optional. Complete reading is architectural enforcement, not best practice suggestion.

Violating the letter of this protocol is violating the spirit of this protocol.

When to Use

Automatic activation for:

• All .md files (specifications, plans, documentation)
• All files >=3000 lines (large files most likely to be skimmed)
• SPEC_* and PLAN_* files (critical documents)
• **/SKILL.md files (skill definitions)
• User prompts >3000 characters (~500 words)

Manual activation:

• /shannon:read_complete <file> - Force protocol for any file
• Skill auto-injected by hooks when triggers detected

Don't use for:

• Quick reference lookups (API syntax, command flags)
• Repeated reads of same file (if previously verified complete)
• User explicitly wants fast skim (use /sh_read_normal <file>)

The Iron Law

NO SYNTHESIS WITHOUT COMPLETE READING FIRST

If you haven't verified lines_read == total_lines, you cannot make conclusions.

The Four-Step Protocol

Step 1: PRE-COUNT (Before reading begins)

MANDATORY: Count total lines BEFORE reading ANY content.

Commands:

# Count lines first
total_lines=$(wc -l < file.md)

Output required:

File has {N} lines. Now I will read all {N} lines completely.

No exceptions: You cannot read without knowing total line count first.

Step 2: SEQUENTIAL READING (Line-by-line)

Read EVERY line sequentially from 1 to N.

NOT allowed:

• ❌ "Read relevant sections"
• ❌ "Scan for key points"
• ❌ "Quick overview then deep dive"
• ❌ offset=0, limit=100 (partial reading)
• ❌ grep/search without complete reading

REQUIRED:

• ✅ Read line 1
• ✅ Read line 2
• ✅ Read line 3
• ✅ ...continue sequentially...
• ✅ Read line N (last line)

Tracking: Count each line as you read it.

Step 3: VERIFY COMPLETENESS (Before synthesis)

Verify: lines_read == total_lines

Formula:

IF lines_read < total_lines THEN
  missing_lines = total_lines - lines_read
  ERROR: "INCOMPLETE READING: Missing {missing_lines} lines"
  BLOCK: No analysis, no synthesis, no conclusions
  REQUIRED: Return to Step 2, read missing lines
END IF

Verification output:

✅ COMPLETE READING VERIFIED
   Total lines: {N}
   Lines read: {N}
   Completeness: 100.0%
   Status: READY FOR SYNTHESIS

Step 4: SEQUENTIAL SYNTHESIS (After complete reading only)

Use Sequential MCP for deep thinking about what was read.

Minimum thinking steps (based on file size):

• Small (<500 lines): 50+ thoughts
• Medium (500-2000 lines): 100+ thoughts
• Large (2000-5000 lines): 200+ thoughts
• Critical (5000+ lines): 500+ thoughts

NOT allowed until verified complete:

• ❌ Analysis during reading
• ❌ Patterns identified during reading
• ❌ Conclusions during reading
• ❌ "I noticed that..." during reading

ONLY after verification:

• ✅ Synthesis via Sequential MCP
• ✅ Pattern identification
• ✅ Comprehensive analysis
• ✅ Actionable conclusions

Known Violations and Counters

Captured from baseline testing (RED phase):

❌ VIOLATION 1: "I'll read the relevant sections first"

Baseline behavior: Agent uses grep/search to find "relevant" sections, skips complete reading.

Rationalization captured:

"Let me search for the key requirements first to understand scope"

Shannon counter:

⚠️ STOP. "Relevant sections" = incomplete understanding.

REALITY CHECK:
- You don't know what's relevant until you've read everything
- "Relevant" is determined by your assumptions, not reality
- Critical details are often in "irrelevant" sections

REQUIRED ACTION:
1. Count total lines
2. Read ALL lines sequentially (line 1, 2, 3, ..., N)
3. THEN identify what's relevant (after complete reading)

NO EXCEPTIONS.

❌ VIOLATION 2: "Read offset=0, limit=200 to get started"

Baseline behavior: Agent reads partial file to "get started", never returns to read rest.

Rationalization captured:

"I'll read the first 200 lines to understand structure, then continue"

Shannon counter:

⚠️ STOP. Partial reading is incomplete reading.

REALITY CHECK:
- "Get started" reading = never finish reading
- Lines 201-N contain critical details you'll miss
- "Overview" = superficial understanding

REQUIRED ACTION:
1. Count total lines
2. Read ALL lines (not just first 200)
3. Verify lines_read == total_lines
4. NO synthesis until verification passes

NO EXCEPTIONS.

❌ VIOLATION 3: "File is too long, I'll skim efficiently"

Baseline behavior: Agent rationalizes skimming for files >2000 lines.

Rationalization captured:

"This 2,500-line specification is quite extensive - I'll skim efficiently for key points"

Shannon counter:

⚠️ STOP. "Too long" is not an exemption.

REALITY CHECK:
- Long files are EXACTLY why this protocol exists
- "Skim efficiently" = miss critical details
- Mission-critical work cannot tolerate "good enough" understanding

REQUIRED ACTION:
1. Yes, read all 2,500 lines
2. Use Sequential MCP for 200+ synthesis thoughts
3. This takes time (30-60 min) - that's acceptable
4. Complete understanding > speed

NO EXCEPTIONS.

❌ VIOLATION 4: "I remember this file from earlier"

Baseline behavior: Agent skips re-reading based on session memory.

Rationalization captured:

"I already read this file earlier in the session"

Shannon counter:

⚠️ STOP. Memory is not verification.

REALITY CHECK:
- Remembering != having read every line
- Files may have changed
- "Key points" = selective memory, not complete understanding

REQUIRED ACTION:
1. Re-count lines (file may have changed)
2. Either verify previous complete reading OR re-read:
   - If previous verification exists (100% complete) → synthesis allowed
   - If no verification exists → re-read completely

NO EXCEPTIONS.

Red Flags - STOP Immediately

If you catch yourself using these phrases, STOP - you're about to violate:

Skip-reading triggers:

• "read relevant sections"
• "scan for", "look for", "find the parts about"
• "overview first", "get started with"
• "skim efficiently", "quick pass through"

Partial-reading triggers:

• "offset=0, limit=100"
• "first few hundred lines"
• "initial sections"
• "start with the beginning"

Length-based rationalization triggers:

• "file is too long"
• "quite extensive"
• "very large specification"
• "efficiently review"

Memory-based triggers:

• "already read this"
• "recall from earlier"
• "familiar with this file"
• "remember the key points"

ALL OF THESE MEAN: STOP. Count lines. Read all lines. Verify completeness.

Quantitative Tracking

Shannon enhancement: Track reading completeness across session.

Save to Serena:

serena.write_memory("shannon/reading/{file_hash}", {
    "file_path": file_path,
    "total_lines": total_lines,
    "lines_read": lines_read,
    "completeness": lines_read / total_lines,
    "synthesis_steps": synthesis_steps,
    "timestamp": ISO_timestamp,
    "status": "COMPLETE" if completeness == 1.0 else "INCOMPLETE"
})

Query reading history:

# Check if file was completely read before
history = serena.read_memory("shannon/reading/{file_hash}")
if history and history["completeness"] == 1.0:
    # Previously verified complete
    # Can skip re-reading OR re-verify if file changed

Integration with Shannon Commands

Enhanced commands that enforce this protocol:

/shannon:spec: Before 8D analysis:

1. Count specification lines
2. Read ALL lines sequentially
3. Verify completeness (100%)
4. Sequential MCP synthesis (100+ thoughts)
5. THEN present 8D analysis

/shannon:analyze: Before analysis:

1. For each critical file, count lines
2. Read ALL lines per file
3. Verify per-file completeness
4. Aggregate verification
5. THEN synthesize findings

/shannon:wave: Before wave execution:

1. Count wave plan lines
2. Read ALL tasks sequentially
3. Verify plan completeness
4. Sequential synthesis
5. THEN execute waves

Configuration

Per-project config: .shannon/reading-enforcement.json

{
  "enforcement_enabled": true,
  "critical_file_patterns": [
    "*.md",
    "SPEC_*",
    "PLAN_*",
    "**/skills/**/SKILL.md"
  ],
  "size_threshold": 3000,
  "minimum_synthesis_steps": {
    "small": 50,
    "medium": 100,
    "large": 200,
    "critical": 500
  },
  "override_allowed": true,
  "override_audit": true
}

Override for legitimate cases:

/sh_read_normal <file>  # Disables enforcement
# All overrides logged to Serena for audit

Common Rationalizations

Integration with Other Skills

This skill is prerequisite for:

• spec-analysis - MUST read specification completely before 8D scoring
• shannon-analysis - MUST read codebase files completely
• writing-plans - MUST read requirements completely before planning
• executing-plans - MUST read plan completely before execution

Complementary skills:

• verification-before-completion - Both enforce evidence over claims
• systematic-debugging - Both enforce thoroughness over guessing

The Bottom Line

For mission-critical work, complete understanding is mandatory.

Same as NO MOCKS for testing: superficial comprehension = unreliable results.

If you follow "read every line" for code reviews, follow it for specifications.

This protocol is not optional. It's architectural enforcement of thoroughness.

Target domains: Finance, Healthcare, Legal, Security, Aerospace - where AI hallucinations from incomplete reading are unacceptable.